stainless steel transport used for sale

Volkswagen Transporter Fully maintained with history 1st owner Timing belt already replaced Recently new tyres DSG 7 automatic Mileage slightly ascending - light traffic Auction-ID: A3-44484-19025

Information paper trailer (see photos in the back) - Trailer from 2018 (Chassis number: NP9Y11A1FJA003125) - Brand: Aksoylu (2 AXLE SEMI-TRAILER) - Rear part extra extendable up to 1.5M TRACTOR OPTION LIST: - Remote control for trailer in cab - Front AND rear air suspension Auction-ID: A3-44484-16553

Merlo TF33.7-115L Premium cabin Spring-loaded arm Air conditioning Last maintenance : 03/2025 Agricultural homologation : T1a Hours : 5014h New air conditioning pump Spoons included Auction-ID: A3-43529-19030

Well-maintained Fiat Ducato high-capacity transporter from 1st owner with a clean overall impression and good commercial vehicle equipment. Interior neat, seats in good condition and cargo space with normal commercial vehicle wear. The body shows no major visible damage, slight signs of use, dirt and subtle residues of former lettering are present. The vehicle is suitable as a craftsman's vehicle, transporter or base for expansion projects. Permissible total mass 3,300 kg, axle load front/rear axle 1,750/1,900 kg. Equipment: · Navigation system · Rear view camera · Automatic climate control · Cruise control · Trailer hitch · Fiat Professional Loading Floor · Airline rails in the hold · 3-seater cab · 270° opening rear doors · Side sliding door Notes: · 1. Hand with only one letter entry · Liability for material defects and return excluded · Normal signs of wear in the car ...

Vlemmix Vehicle Transporter 3,500 kg – 2,700 kg Payload – 4.00 × 1.80 m Manufacturer: Vlemmix (NL) Type: V3A Permissible total weight: 3,500 kg Payload: approx. 2,700 kg Interior dimensions / loading area: approx. 4.00 × 1.80 m TÜV: until 02/2028 Facilities • Rear ramps integrated • Stable drive-on grille frame • Galvanized chassis • Heavy-duty lashing points all around • Training wheel • Overrun brake • 13-pin connector • Continuous loading area • Side walls in solid steel construction Condition • Used, ready for use • Normal signs of wear • Technically functional Ideal for • Vehicle transport • Mini excavators • Construction machinery • Agricultural machinery • Transport of heavy equipment Auction-ID: A7-46022-2513

Two horizontal pressure tanks on a transport frame with fork guides. Each tank is fitted with a cooling coil and various fittings., Additional title: Horizontal, coolable stainless steel pressure tanks, Gross volume: 1000 l, Max. overpressure (2 pcs.): 3 bar test pressure: 3,9 bar, Length: 2,3 m, Width: 0,9 m, Material: Stainless steel, Position: Horizontal, Base construction: On stainless steel frame with fork guidances, Features: cooling coil, outlet pipe DN50, sight glass, pressure gauge

2 horizontal stainless steel pressure tanks, each equipped with outlet pipe, pressure gauge and sight glasses. The tanks come with a saddle frame for installation., Additional title: horizontal stainless steel tanks mounted on scaffolding, Volume: 1050 l, Max. overpressure: 3 bar, Length: 2200 mm, Width: 800 mm, Height: 800 mm, Material: stainless steel, Position: horizontal, Base construction: with scaffolding for installing the tanks one above the other, Features: outlet pipe DN65, pressure gauge, sight glasses

2 horizontal stainless steel pressure tanks, each equipped with cooling coil and sight glasses. The tanks come with a frame for installation., Additional title: horizontal, coolable stainless steel pressure tanks, Volume vessel: 1200 l, Volume cooling coil: 4 l, Max. overpressure: 3 bar, Max. working temperature: 30 °C, Length: 2700 mm, Width: 900 mm, Height: 900 mm, Material: stainless steel 1.4301 (AISI 304), Position: horizontal, Base construction: each on saddle frame, Features: cooling coil, sight glasses

Horizontal stainless steel pressure tanks with cooling jackets, sight glasses, outlet pipes and pressure gauges., Additional title: horizontal, coolable stainless steel pressure tanks, Volume: 1050 l, Max. working overpressure: 3 bar, Length: 2300 mm, Width: 860 mm, Height: 860 mm, Material: stainless steel, Position: horizontal, Features: cooling jacket, outlet pipe DN50, sight glasses, pressure gauge

Tank trailer - semi-trailer with bright beer tank for beer transport; the construction year of the trailer is 2012., Additional title: Horizontal stainless steel pressure tank on a mobile trailer, Volume: 25250 Liter , Operating pressure: 3 bar , Systemic volume: 25250 Liter, Material: Stainless steel, Position: lying on a semi trailer

A stainless steel pressure tank housed in a shipping container, fitted with various equipment for dispensing drinks., Additional title: Stainless steel pressure tank housed in a shipping container, Capacity: 3200 l, Operating pressure: 2,5 bar, Operating temperature: 20 °C, Length: 4,65 m, Width: 2,3 m, Height: 1,95 m, Weight: 2500 kg, Features: Beer pump, thermometer, gas measurement, flow meter (Diessel), 2 cable drums, hose reel, safety valve, cleaning and filling connection, spray head, manometer, empty detection electrode Control cabinet, compressed air compressor (AltasCopco), pallet for 4 CO2 bottles, valves, pressure reducer

Stainless steel tank with cladding, mounted on a transport frame., Additional title: Horizontal, cladded stainless steel tank, Capacity: 4000 l, Pressure: 0,99 bar, Length: 3,25 m, Width: 1,4 m, Weight: 600 kg, Material: stainless steel, Position: horzontal, Base construction: transport frame, Features: insulation, inlet DN 50, outlet DN 40

Horizontal transport tank for beer with sight glass, manometer, manhole and outlet in the dished bottom. With slide rails and crane eyes, Volume: 4993 liter, Operating pressure: 2 bar bzw. 3 kp/cm², Position: horizontal, Base construction: on frame with guide rails, Features: sight glass, manometer, manhole, outlet in the dished bottom, crane eyes

PET bottle air conveyor over 2 floors, used for 0.5 l, 1.0 l and 1.5 l bottles. Length approx. 50 m. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: PET bottle conveyor system, Capacity: 24000 b/h, Formats: 0,5, 1,0 l und 1,5 l PET-bottles, Material: mainly stainless steel, Position: free-standing on the floor / suspended from the ceiling, Features: Bottle transport channel with bottle guides, with 2 x 360° and additional curves, with a 15° incline and horizontal run, 5 frequency-controlled blower motors

Conveyor belts for PETCYCLE crates, consisting of motorised conveyor belts and gravity roller conveyors. Length approx. 70 m, Additional title: Crate transport routes, Capacity: 4000 crates/h, Formats: Petcycle box for 20 x 0.5 l, 9 x 1.0 l, 6 x 1.0 l and 6 x 1.5 l PET bottles, Operation / Control: Control panel / Siemens S7-300, Material: Mainly stainless steel, Position: Free-standing, Features: Hinge belt conveyors, roller conveyors, conveyor frames, drives, substructure, drip tray, control system

Conveyor belts for PET bottles, with 1-lane hinged belt chain and 6 lanes. Capacity: 24,000 bottles/hour, Additional title: Free bottle conveyors, Capacity: 24000 b/h, Free bottle transport approx.: 30 m, 90° bottle transport curves: 1 piece 1-chain conveyor, 180° bottle transport curve: 1 piece 6-chain conveyor, Formats: PET-bottles in 0,5 l, 1,0 l, 1,5 l, Operation / Control: controlbox / Siemens S7-300, Material: mainly stainless steel, Position: free-standing, Features: Conveyor frames, deflection stations, drives, frequency controls, electrical switchgear, automatic belt lubrication

Steel cables Wire ropes Slings made of steel Length: 10 m Diameter: 25 mm Hoses right/left Load capacity: 5 to. 10 pieces available

The scope of delivery includes: 01x Rectangular tube, used Profile dimensions: approx. 50 x 30 mm Material color: orange Total length: approx. 3,660 mm Center-center hole: approx. 3,630 mm Material thickness: approx. 1.50 mm Number of boreholes: 2 pcs. Drill holeØ: approx. 10 mm Weight / pcs.: 6,150 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. In addition, a desired transport or shipment of this article is with additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

The scope of delivery includes: 01x Steel panel, used Material colour: sendzimir galvanised Total width: approx. 750 mm Total depth: approx. 1,150 mm Clear width: approx. 920 mm Truss support: approx. 58 mm Material thickness: approx. 2.00 mm Weight / piece: approx. 15,00 Kg Note: - The steel panels have a border for the trusses on one side. (Height: approx. 25 mm) - The other side is continuous and serves as a 22 mm high upstand Push-through protection! The following quantities are required for the following truss lengths: 2,250 mm – 03 pieces 3,000 mm – 04 pieces 3,750 mm - 05 pieces Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged sepa ...

Steel grinding block, steel grinding machine ULRICH KLINGEL type HSM 4Year of construction approx. 1976with 4 workstationsGrinding wheel diameter: 1x 100; 1x 150; 2x 200 mmGrinding wheel speed: approx. 1400/2800 rpm Motor power: approx. 1 kWNet connection: 380 volts, 50 Hz- 3x swinging grinding table- all 3 workstations with swivelling tables, feeding movement via handwheel- one workstation (the 4th) with swivelling and tilting table, feeding movement via handwheel- 1 piece diamond grinding wheel 100 mm is mounted (heavily worn)- 2 pieces

Straightening and welding plate steelMilled steel plate with good surface, heavy straightening plateLength 1900 mmWidth 1500 mmThickness 70 mm continuous machined surface, surface milled- plate provided with some symmetrical holesWeight approx. 1600 kggood conditionHeight-adjustable feet made of cast steel can be found in our shop; used

Tool steel, round material, shaft sectionShaft, steel block, shaft sawnCold work tool steel 1.2842Material section 400 mm x length 165 mmNet weight: approx. 160 kgMaterial number: 1.2842Material abbreviation: 90MnCrV8Cold-work tool steel with high hardness acceptance and good dimensional stability during hardeningApplication in toolmaking for cutting, punching and embossing tools.Rollers and profile rollers, measuring tools, guide rails, paper cutting knives. Delivery condition: Annealed to max. 229 HBug strength in delivery condition: 770

The scope of delivery includes: 01x Rail / Track, used Rail profile: S41-10 Total length: approx. 3,000 mm Width: approx. 125 mm Height: approx. 140 mm Head: approx. 67 mm Bridge: approx. 12 mm Weight: approx. 120 kg / pcs. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

\" Steel filing cabinet AH 4 – industrial version • Manufacturer VEB Stahlmöbelbau Haldensleben • Type / model Steel filing cabinet AH 4 • Name steel filing cabinet AH 4 – GDR industrial version • Description, accessories, condition Stable steel filing cabinet from GDR production in heavy version. Version with: • 2-leaf door • Multi-point locking • 4 height-adjustable shelves • Original lock • 1 key available Type plate: TGL 48-52 118 Plan-Pos. 139 61 110 Year of construction 1976 / 1977 Weight: 115 kp Condition: Used with usual signs of use (scratches, slight dents, paint wear). Clean inside, technically functional. Sale without content, with key. Manufacturer: VEB Stahlmöbelbau Haldensleben Type: AH 4 Year of construction: 1976/1977 Standard: TGL 48-52 118 Weight: approx. 115 kg • Dimensions in mm (LxWxH) approx. 1000 x 500 x 1900 mm • Weight approx. 115 kg ...

800 litre, Stock number: T3793, Litre: 800, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Vacuum de-aeration tank, Standing: 4 pcs. legs, Top: Conical, boltet, Bottom: Conical, Tank cover: In the side, Ø 460 mm., Agitator: Yes, Motor: 4,0 kW - 400/660 Volt - 1435 rpm., CIP: 3 pcs., Inner diameter: Ø 1000 mm., Total height: 2300 mm., Manufacturer: Alfa Laval, Model/type: RV-1-800

New 10.000 litre tank,, stainless steel AISI 304,, closed top, standing on 3 pc. legs., Conical top and bottom 15°,, tank cover in the top Ø 450 mm., Ø 1” pipe in the top centre,, Ø 4” pipe in the top,, Ø 2½” pipe in the bottom centre., The tank is made of pickled plate type B2., All weldings on the inside grinded grain 60., All weldings on the outside sandblasted., Tank dimension Ø 2050 x cylinder 3000 mm., Density: 1,0., Working temperature: 0 - +50°C., Working pressure: None, Scope of application: A, Litre: 10.000, Material: Stainless steel AISI 304

New 35.000 litre tank,, stainless steel AISI 304,, closed top, standing on 6 pc. legs., Conical top 15°., Conical bottom 20°., Tank cover on top,, Ø 4 connection piece on top., Ø 3 connection piece on top center., Ø 3 connection piece in bottom center., All welds on the inside are grind grain 60., All welds on the outside are sandblasted., Tank dimension Ø 2500 mm x shroud 7000 mm., The tank is made in stained plate type B2., Density: 1.0., Work temperature: 0-+50° C., Work pressure: None., Scope of application: A, Litre: 35.000, Material: Stainless steel AISI 304

New 90.000 litre tank,, stainless steel AISI 304,, standing for foundation., Flat sloping bottom., Conical top 20° ,, Tank cover in the side., 3 pc. connection pieces, Tankdimension Ø 3350 x cylinder 10500 mm., The tank is made of pickled plate type B2., All weldings inside grinded grain 60., All weldings out side sandblasted., Density 1,0., Working temperature 0 - +50°C., Working pressure: None, Scoop of application: A, Litre: 90.000, Material: Stainless steel AISI 304

New 50.000 litre tank,, stainless steel AISI 304,, standing for foundation., Flat sloping bottom., Conical top 20° ,, Tank cover in the side., 3 pc. connection pieces, Tankdimension Ø 2950 x cylinder 7500 mm., The tank is made of pickled plate type B2., All weldings inside grinded grain 60., All weldings out side sandblasted., Density 1,0., Working temperature 0 - +50°C., Working pressure: None, Scoop of application: A, Litre: 50.000, Material: Stainless steel AISI 304

New 40.000 litre tank,, stainless steel AISI 304,, closed top, standing on 6 pc. legs., Conical top 15°, Conical bottom 20°, Ø 2” pipe in top centre., Ø 4” pipe in tank top., Ø 3” pipe in bottom centre, Tank cover in the side., All weldings inside grinded grain 60., All weldings out side sandblasted., Tankdimension Ø 2900 x cylinder 6000 mm., The tank is made of pickled plate type B2., Density 1,0., Working temperature 0 - +50° C., Working pressure: None, Scoop of application: A, Litre: 40.000, Material: Stainless steel AISI 304

New 25.000 litre tank, Stock number: T25B4-1, Litre: 25.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 4 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Pipes: Top Ø 1½ og Ø 4 - Bund Ø 2½, Inner diameter: Ø 2600 mm., Cylinder: H 4500 mm., Total height: H 5627 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 50.000 litre tank, Stock number: T50B4-1, Litre: 50.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 6 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the side, Pipes: Top Ø 2 and Ø 4 - Bottom Ø 3, Inner diameter: Ø 2900 mm., Cylinder: H 7500 mm., Total height: H 8825 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 30.000 litre tank, Stock number: T30B4-1, Litre: 30.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 6 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Pipes: Top Ø 1½ og Ø 4 - Bottom Ø 2½”, Inner diameter: Ø 2500 mm., Cylinder: H 6000 mm., Total height: H 7100 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,05, Working pressure: None, Manufacturer: Handing

New 20.000 litre tank, Stock number: T20B4-1, Litre: 20.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 4 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Pipes: 3 pcs., Inner diameter: Ø 2350 mm., Cylinder: H 4500 mm., Total height: H 5549 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 80.000 litre tank,, stainless steel AISI 304,, standing for foundation., Flat sloping bottom., Conical top 20° ,, Tank cover in the side., 3 pc. connection pieces, Tankdimension Ø 3400 x cylinder 9000 mm., The tank is made of pickled plate type B2., All weldings inside grinded grain 60., All weldings out side sandblasted., Density 1,0., Working temperature 0 - +50°C., Working pressure: None, Scoop of application: A, Litre: 80.000, Material: Stainless steel AISI 304

New 60.000 litre tank,, stainless steel AISI 304,, standing for foundation., Flat sloping bottom., Conical top 20° ,, Tank cover in the side., 3 pc. connection pieces, Tankdimension Ø 3250 x cylinder 7500 mm., The tank is made of pickled plate type B2., All weldings inside grinded grain 60., All weldings out side sandblasted., Density 1,0., Working temperature 0 - +50°C, Working pressure: None, Scoop of application: A, Litre: 60.000, Material: Stainless steel AISI 304

New 70.000 litre tank, Stock number: T70F4-1, Litre: 70.000, Material: Stainless steel AISI 304, Item: Tank, Standing: For foundation, Top: Conical 15°, Bottom: Flat sloping, Tank cover: In the side, Pipes: 3 pcs., Inner diameter: Ø 3500 mm., Cylinder: H 7500 mm., Total height: H 7997 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 3.000 litre tank, Stock number: T3B4-1, Litre: 3.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 3 pcs. legs, Top: Conical 15°, Bottom: Conical 15°, Tank cover: In the top, Ø 450 mm., Pipes: Top Ø 1 and Ø 4 - Bottom Ø 2, Inner diameter: Ø 1560 mm., Cylinder: H 1500 mm., Total height: H 2162 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

The frame and the formwork is in a used good condition and can be used immediately. 26x Framax 1.35x2.70m 10x Framax 0.90x2.70m 6x Framax 0.60x2.70m 4x Framax 0.45x2.70m 4x Framax 0.30x2.70m 4x Framax 0.90x2.70m Uni 4x Framax inner corner 2.70m 2x Framax outer corner 2,70, 120x Framax RU Clamp 10x Framax Uni Spanner 10x Framax Universal Connector 10-16cm 12x Framax clamping clamp 4x Framax clamping rail 0.90m 2x Framax clamping rail 1.50m 1x Framax conversion bracket Other quantities or elements are available on request. Frame formwork Framax The high-performance steel frame formwork for large-area shelling with the crane Framax is the frame formwork system that achieves a consistent 15 cm grid with only a few elements, whether used standing or lying. All fasteners, all accessories blend seamlessly into the grid for fast formwork times and high cost-effectiveness ...

Steel tank 30000 litres / 30 m³ / underground tank / firefighting water tank / double-walled / Rain water recovery tank / water cistern good condition, underground storage tanks, water tank, underground tank, diesel tank, heating oil tank, double-walled steel tank, Content: 30 m³ / 30000 litres Material: steel tank according to DIN 6608 Dimensions / size: approx. Ø 2.00 m x approx. 10.00 m long Weight: 6 tons Other: outside with bituminous insulation, double-walled, incl. test certificates. The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can manure, as a storage tank for water, AHL, ASL, seeping juice, canola oil, rain collection tank, used fire-fighting water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your de ...

The container is factory-new, enstpricht the German Institute for Standardization 6616, owns 2 saddle feet is emptied inside and cleaned and undercoated outside, incl. rise leaders. D = 2.90 m - L = approx. 16.00 m. the container receives a factory-new Kunststoffinninhuelle - continuously to the storage of liquid fertilizer incl. leaky warning device mounts in the protective box. the plastic inside cover owns a Allgemeine appraisial Zulassung Z-65.30-466 and is therefore for the storage of liquid fertilizer AHL as well as reducing agent NOx from 32 (AdBlue) suitably and admitted. the price gets on ex works - freely charged.

steel tank 50 m³ / 50,000 litres underground tank / fire fighting water tank / water cistern underground storage in good condition, diesel fuel tank, fuel oil tank volume: 50 m³ / 50.000 litres material: steel tank dimensions: appr. Ø 2,50 m x ca. 10,00 m weight: appr. 8-10 t single-walled, bitumen insulation on the outside The container is in used condition, according to the age there are traces of use. The container can be used as a storage tank for water, liquid feed, whey, molasses, liquid manure, canola oil, seeping juice, AHL/ASL, farm slurry or as rainwater tank, water cistern etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sol ...

23.6 m³ / 23600 litres steel tank coated inside. Munkadur coating, 2-component coating, 2-component Top state coated incl. good reasonably priced - used steel tank from the inside: new coat of paint and new dome cover gasket. Dimensions: Ø x 2.45 m approx. 5.50 m long The tank is with a high-quality food-approved Lined interior fully coated (Munkadur). Steel tank / container can be used as a storage tank for water, Liquid feed, whey, molasses, liquid manure, AHL, ASL, seeping juice, Rapeseed oil, edible oil, rain collection tank, etc. are used. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us ...

approx. 20 m³ / 20,000 litres steel tank, firefighting water tank, cistern In good condition, aboveground or underground storage tank, diesel fuel tank, fuel oil tank volume: approx. 20 m³ / 20,000 litres material: steel length: 6,50 m diameter: 2,00 m weight: approx. 3 to 3,5t The container is used, has been emptied inside and professionally cleaned. According to the age there are traces of use. Can be used as a storage tank for water, slurry, AHL, ASL, canola oil or as rainwater tank, firefighting water tank, cistern etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so  ...