stainless steel tank used for sale

New 40.000 litre tank, Stock number: T40B4-1, Litre: 40.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 6 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the side, Pipes: Top Ø 2 and Ø 4 - Bottom Ø 3, Inner diameter: Ø 2900 mm., Cylinder: H 6000 mm., Total height: H 7224 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 25.000 litre tank, Stock number: T25B4-1, Litre: 25.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 4 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Pipes: Top Ø 1½ og Ø 4 - Bund Ø 2½, Inner diameter: Ø 2600 mm., Cylinder: H 4500 mm., Total height: H 5627 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 50.000 litre tank, Stock number: T50B4-1, Litre: 50.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 6 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the side, Pipes: Top Ø 2 and Ø 4 - Bottom Ø 3, Inner diameter: Ø 2900 mm., Cylinder: H 7500 mm., Total height: H 8825 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 30.000 litre tank, Stock number: T30B4-1, Litre: 30.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 6 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Pipes: Top Ø 1½ og Ø 4 - Bottom Ø 2½”, Inner diameter: Ø 2500 mm., Cylinder: H 6000 mm., Total height: H 7100 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,05, Working pressure: None, Manufacturer: Handing

New 20.000 litre tank, Stock number: T20B4-1, Litre: 20.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 4 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Pipes: Top Ø 3 og Ø 4 - Bottom Ø 3”, Inner diameter: Ø 2350 mm., Cylinder: H 4500 mm., Total height: H 5549 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 80.000 litre tank, Stock number: T80F4-1, Litre: 80.000, Material: Stainless steel AISI 304, Item: Tank, Standing: For foundation, Top: Conical 15°, Bottom: Flat sloping, Tank cover: In the side, Pipes: 3 pcs., Inner diameter: Ø 3400 mm., Cylinder: H 9000 mm., Total height: H 9484 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 60.000 litre tank, Stock number: T60F4-1, Litre: 60.000, Material: Stainless steel AISI 304, Item: Tank, Standing: For foundation, Top: Conical 15°, Bottom: Flat sloping, Tank cover: In the side, Pipes: 3 pcs., Inner diameter: Ø 3250 mm., Cylinder: H 7500 mm., Total height: H 7964 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 70.000 litre tank, Stock number: T70F4-1, Litre: 70.000, Material: Stainless steel AISI 304, Item: Tank, Standing: For foundation, Top: Conical 15°, Bottom: Flat sloping, Tank cover: In the side, Pipes: 3 pcs., Inner diameter: Ø 3500 mm., Cylinder: H 7500 mm., Total height: H 7997 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 3.000 litre tank, Stock number: T3B4-1, Litre: 3.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 3 pcs. legs, Top: Conical 15°, Bottom: Conical 15°, Tank cover: In the top, Ø 450 mm., Pipes: Top Ø 1 and Ø 4 - Bottom Ø 2, Inner diameter: Ø 1560 mm., Cylinder: H 1500 mm., Total height: H 2162 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 5.000 litre tank, Stock number: T5B4-1, Litre: 5.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 3 pcs. legs, Top: Conical 15°, Bottom: Conical 15°, Tank cover: In the top, Ø 450 mm., Pipes: Top Ø 1 and Ø 4 - Bottom Ø 2, Inner diameter: Ø 2000 mm., Cylinder: H 1500 mm., Total height: H 2349 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 35.000 litre tank, Stock number: T35B4-1, Litre: 35.000, Material: Stainless steel AISI 304, Item: Tank, Standing: 6 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the side, Pipes: Top Ø 2 and Ø 4 - Bottom Ø 3, Inner diameter: Ø 2500 mm., Cylinder: H 7000 mm., Total height: H 8100 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings are sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 50.000 litre tank, Stock number: T50F4-1, Litre: 50.000, Material: Stainless steel AISI 304, Item: Tank, Standing: For foundation, Top: Conical 20°, Bottom: Flat sloping, Tank cover: In the side, Pipes: 3 pcs., Inner diameter: Ø 2950 mm., Cylinder: H 7500 mm., Total height: H 7923 mm., Plate type: The tank is made of pickled type B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

New 100.000 litre tank, Stock number: T100F4-1, Litre: 100.000, Material: Stainless steel AISI 304, Item: Tank, Standing: For foundation, Top: Conical 20°, Bottom: Flat sloping, Tank cover: In the side, Pipes: 3 pcs., Inner diameter: Ø 3500 mm., Cylinder: H 10500 mm., Total height: H 10959 mm., Plate type: The tank is made of pickled B2, Inner finish: All weldings grinded grain 60, Outer finish: All weldings sandblasted, Working temperature: 0 - +50° C, Density: 1,0, Working pressure: None, Manufacturer: Handing

Cheese pan / layered cheese pan / curd tub / drain versatile use Dimensions: Length x Width x Height: 61 x 62 x 81 cm Content approx.: 75 litres Expiration NW: 50

We have 3 pieces of high-grade steel chimneys of the brand Hobatherm on camp model: Hobatherm high-grade steel chimney system Compactly Z-13.1.2-03.2274 Baucert construction year 2004 the chimneys were 2 years in a BHKW in use an application. the height of the chimneys amounts to approx. 20 m and they are provided with an isolation. price each, from camp 6,500.00 ? + VAT

Cat. No. 13-0029 in a very good condition Testing water by 22°C back pressure at 1 bar pressure: 0,4 bar capacity: 7800 l/h motor: 0,55 kW Connection: iniet: DN 65/outlet: DN 50 according to DN 32676 can be changed on request for an additional charge surcharge: infinitely variable via frequency converter Measurements and Weight: Length: 60 cm 45 cm Width: 25 cm 21 cm Height: 74 cm 40 cm Weight: 40 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 13-0048 in a very good condition Testing water by 22°C back pressure at 1 bar Pressure: 3,2 bar capacity: 7.800 litres/h Motor: 7,5 kW Connection: inlet/outlet: DN 65 according to DIN 32676 - can be changed on request for an additional charge Measurements: length: 140 cm width: 44 cm height: 95 cm weight: 300 kg All prices are valid Ex-works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale

2 PC. stainless steel chimneys outside diameter 300 mm, inner diameter 200 mm, length 7 m 1 STK. stainless steel fireplace outside diameter 400 mm, diameter 300 mm, length 7 m Price VB

Stainless steel chimney Dimensions: Height: 23.5 m Diameter: approx. 1 m Material: 1.4301 (V2A) Chimney consists of two parts each 12 meters, which are screwed! Frames run to top thin-walled. Construction: Frames length: 2 meters Material thickness of frame: Skirt: 8 mm (steel) Following two frames: 6 mm (1.4301) Following two frames: 4 mm (1.4301) Remaining frames: 3 mm (1.4301) In very good condition!

3 tube feet standing stainless steel container made of V2A, 1.4301 WSt Containers with upper edge reinforcement Manufacturer: API Schmidt-Bretten Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: approx. 1,560 mm Open top containers. Container with lower convex base on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 In very good condition!

Used standing on 3 feet of pipe stainless steel container made of V2A, 1.4301 - WSt - container with upper edge reinforcement Content: 300 LTR. Diameter: approx. 660 mm Zyl. Height: 900 mm Total height with feet: 1.500 mm Open top containers. Container with bottom cone base. on the cover: 1 threaded socket DN 50 1 socket ½ " in the middle of the subfloor: 1 spout front pulled about NW 50 otherwise com. photo in very good condition!

VA Tube Bundle WT Manufacturer: E. Gessner AG, built 1982, material 1.4465, 1.4571, Dimensions: Diameter Coat: 600mm Effective Length Pipes: 5000mm Di-inner tube: 20mm Da inner tube: 24mm Total length 5880mm Total height: 1000mm Connections Coat: DN 200 Connections Pipe side DN 50 Foot distance (holes) 3000mm Transmission area: 65m2 / 78m2 (indoor/outdoor) 208 inner tubes Ab. Pressures: -1 / 3 bar inner tubes -1 / 6bar coat Temp range: -10 / +200 Price refers to a heat exchanger. 2 present

Te Koop: Stainless steel butterfly valve Handbediend. 6 "las las karambir zonder."

Technical data capacitor volume flow max.: 300m3/h capor-mass max in delivery state: approx. 430mm x1610 mm high Cylindricher part: approx. 273 mm weight of the chamber in delivery state: approx. 80 kg content upper part (capacitor): approx. 30L content lower part (template) approx. 28 L material Elastomers: NBR/FKM/PTFE Temperature capacitor max: 1 to 80C capacitor vacuum max: 0 to 1000 mbar (absolute) (capacitor not suitable for overpressure) Temperature exchanger max: 1 to 80C operating equipment Exchanger: water pressure exchanger max: 10bar material exchanger: CU-tinned material capacitor: stainless steel Technical questions or other construction equipment please on request.; ready for use

2 with each ca 1000 l  

Stainless steel containment system Glovebox with insulators with scale and discharge screw for industry, pharmaceuticals, manufacturing and laboratory used , as good as new condition Manufacturer: Hecht Anlagenbau Type: 7.178710 Y.O.M.: 2008 / Nr.: 201040 Material: Stainless steel Test room area approx. 900 x 900 mm Front flap approx. 850 x 650 mm Servive flap on the side approx. 700 x 580 mm for the safe emptying of packaging, sack containers in the Pack Off system for pharmaceutical and chemical products to avoid contermination the containment system can be opened from 3 pages and has an eceleration in a connection on the side of approx. 350 mm Outlet at the bottom approx. 500 mm Opening rear approx. 100 mm Discharge screw with pneumatic valve Screw length approx. 1500 mm Screws approx. 110 mm Screw drive Siemens Z48-KQ - 1.7 L oil; 3000/113 rpm 4x Load cells "Fli ...

USED STAINLESS STEEL 1700 LITRES IPROCOMSA V MIXER REF#: C4291 1700 liter V mixer manufactured by Iprocomsa in stainless steel mounted on stainless steel lined structure with butterfly valve. Pneumatic vibrator at the bottom of the cone. With documentation and electrical panel. Dimensions: Inlet(x2) .. ø 580 mm Outlet flange ... ø int 250 mm ø ext 395 mm Total height .. 2910mm (when the mixer is spinning) Total height without turning: .. 2510mm Total length: ... 4010mm Total width: ... 1300mm Valve outlet to ground: ... 310mm General characteristics: Manufactured by IPROCOMSA Model B-1000 Type V mixer Material Stainless steel Year built 1998 Technical characteristics: Capacity 1700 L

Year of constr.: 2019 Dimensions: L 4400 mm x W 3500 mm x H 5000 m Ploughshare mixers: Type: PPP 2000 / 3 Manufacturer: MINOX Volume: 2000 Lt. Material: Stainless steel 3 x cutter heads Main drive: 37 KW;

Pipesdiameter outside 42 mm/ DN 32 = € 3,95/ meter 48 mm/ DN 40 = € 4,25/ meter 60 mm/ DN 50 = € 5,25/ meter 76 mm/ DN 65 = € 6,95/ meter 89 mm/ DN 80 = € 7,25/ meter 114 mm/ DN 100 = € 9,75/ meter 139 mm/ DN 125 = € 11,95/ meter

Cell wheel lock made of noble steel unused KREISEL Environmental Technology Type: ADG 630 x 800 x 21-24 Z Built: 2005 Inlet opening: approx. 800 x 500 mm Outlet opening: approx. 800 x 500 mm Cell wheel diameter: 630 mm Number of cells: 12 Cell depth: approx. 200 mm Cell wheel made of stainless steel Housing made of steel Geared motor : SEW-EURODRIVE Type :RF107 AR132S/MWEX/II3GD DV132M4/TFII36D 7.5 kW 24 rpm 230/400 V IP65 Motor Ex protected! Total dimensions: approx. 2700 x 800 x 800 mm

Stainless steel round conveyor ring conveyor trough 5850 mm used. Gutters width approx. 120 mm Gutters depth approx. 160 mm Deflection part approx. 800 mm Drive part approx. 900 mm with outlet part Total height approx. 800 mm Engine: SEW 3 kW, 29 rpm. Size approx. 5850 x 900 mm

Stainless steel silo standing on foot ring (sugar silo) Content: approx. 118.000 Ltr. Diameter approx. 3,500 mm Total height: approx. 15,750 mm Bulk density 1.0 t/m³ Silo weight: approx. 10.5 tons Last content: sugar Silo in pressure-shock resistant design (resi-roof system), flanged, filter on the side of the silo, silo with lateral segemnt platform and vertical ladder on the coat: 1 filter nozzle side NW1100 with filter 1 NW250 nozzle for pressure equalization valve 1 NW80 tangential filler neck with pipe led down at the bottom of the coat: 1 block flange DN 100 for full detectors 1 jacket hole DN 600 in standing frame: 1 door 850 x 2,000 mm for sale. Price on request Phone 0172 8345457

Feed tank made of stainless steel with a total capacity of 120 liters. Flat top bottom with flange for feeding and venting. Body with ENDRESS + HAUSER max/min level sensors Conical bottom with discharge from the bottom. About 2 posters Specifications: Volume 120 liters total Background type Conical Envelope 2 posters Outer diameter body 500 mm Body height 600 mm

Conveyor belt

Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm

Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm

Vertical tank made of 316 stainless steel by TM IBÉRICA with a total capacity of 800 liters. Top bottom klopper with off-center flange with agitation, man's mouth and flange connections. Body with visual level. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker TM IBERIAN Model TK-409 Guy DISPENSER Material Stainless steel 316 Year of manufacture 1996 Working pressure on the body: 2 bar Specifications: Volume 800 liters total Background type Klopper Type of agitation 4-blade propeller Agitation motor 0.75 kW - 1.385 rpm Envelope 4 legs Lower bottom tubulatures x1 Man's mouth x1 Breaker x1 Outer diameter body 930 rpm Body height 1000 mm Body height + backgrounds (TOTAL: 3300 mm)

Vertical tank made of stainless steel by OLIVER Y BATLLE with a total capacity of 800 liters. Flat top bottom with support for agitation, folding crescent-shaped lid and flange connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker OLIVER AND BATLLE Guy DISPENSER Material Stainless steel 316 Specifications: Volume 800 liters total Background type Sup. flat / Inf. conical Type of agitation Propeller Agitation motor 0.55 kW - 1390 rpm Envelope 4 legs Lower bottom tubulatures x1 Breaker x1 Outer diameter body 950 rpm Body thickness 3 mm Body height 1100 mm Body height + backgrounds 1375 mm (TOTAL: 3000 mm) Lower bottom thickness 3 mm Lower exit height 1050 mm

Calderin tank with a capacity of 500 liters manufactured by IBAIONDO. General characteristics: Maker IBAIONDO Year of manufacture 2014 Design and working conditions: Air or water Volume: 500 liters Temperatures: -10/+100 ºC Maximum pressure: 10 bar Test pressure: 15 bar

Vertical tank made of stainless steel with a total volume of 100 liters (80 useful liters) Top bottom klopper screwed to the body with peephole, 3 male thread connections and one female thread connection. Bottom klopper with discharge from the bottom On structure with wheels and rails for hitch with bull or pallet truck. General characteristics: Guy Vertical tank Material Stainless steel Specifications: Volume 100 liters total (80 useful liters) Background type Klopper Envelope Structure with wheels Upper bottom tubulatures x4 Lower bottom tubulatures x1 Peepholes x1 Outer diameter body 400 mm Body height 700 mm Body height + backgrounds TOTAL: 1600 MM

Vertical tank made of stainless steel with an approximate capacity of 100 liters. Removable klopper type top bottom. With handles for extraction, with pressure gauge. In the body there are 2 electric resistors to heat the product, and 3 threaded connections (male) Conical bottom with discharge from the bottom. The discharge is blind to be able to empty the tank with the submersible pump that is inside it. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters approx Background type Conical Envelope 4 legs Outer diameter body 500 mm Body height 450 mm Body height + backgrounds (TOTAL: 1100 mm)

Stainless steel tunnel pasteurizer - new Hermis type TP 20 capacity: 22.000 bph - 500 ml Product: beer Year of manufacturing: 2025 Treatment area: 74 m² Number of modules: 7 pcs Treatment length: 13.500 mm Total number of zones: 10 pcs Total width: 6.500 mm Total length incl. infeed / discharge conveyor: 15.000 mm Total number of zones: 10 pcs Heating system: Plate heat exchanger outside of the pasteurizer Steam pressure: 3 bar Electrical system: Siemens S 7 - 1200 The main conveyor of the pasteurizer is made of plastic - Movex - Italy Active transfer - Rexnord - Holland Plate heat exchanger in outside of pasteurizer - Funke - Germany Pumps, stainless steel - Lowara - Italy Spray Nozzles - Lechler - Germany Steam valve - Burket - Germany Air supply system - SMC - Germany Electro peumatic - Fest - Germany Electrical control - Klöckner / Möller or ...

USED GLATT STAINLESS STEEL 1000 LITRES BICONICAL MIXER REF.: C6525 Bicone mixer made of stainless steel manufactured by GLATT with a total capacity of 1000 liters. General characteristics: Manufactured by GLATT Type Biconical mixers Material Stainless steel Year built 1998 Weight 1030 kg Transport dimensions: Total height: 2200 mm Total length: 2430 mm Total width 1500 mm Bicone dimensions: Body diameter: 1300 mm Body height: 350 mm

USED LÖDIGE FKM 2000D STAINLESS STEEL 2.000 LITRES BLENDER REF#: C5725 Lodige FKM2000D mixer with a total volume of 2000 liters manufactured in 316 stainless steel. Two inspection doors with a 55 kw geared motor completely reconditioned. General characteristics: Manufactured by LODIGE Model FKM 2000D Material Stainless steel 316 Year built 1973 Weight 3700 kg (2060 kg + 1640 kg motor and reducer) Technical characteristics: Capacity 2,000 L (800-1,400 L useful) Motor characteristics: Manufactured by SCHORCH Voltage 400/690 V Current 94/55 A Power 55 kW Frequency 50 Hz cos(fi) 0.89 Rotational speed 2960 rpm Reducer characteristics: Manufactured by ELENDER Model SZBW 250 Ratio 0.04 Rotational speed 120 rpm

CALEVA MODEL 380A STAINLESS STEEL SPHERONIZER REF.: E0013 Used Caleva Model 380A stainless steel spheronizer. Unit has a 380mm diameter bowl. 250g to 5kg batch size with an approximate output of 50kg per hour. Unit is driven by a 1.5kw, 415 volt, 3 phase, 50 hz motor. Mounted in stainless steel cabinet with local controls. General characteristics: Manufactured by CALEVA Model 380A Material Stainless steel Motor characteristics: Voltage 415 V Power 1.5 kW - 2 cv Frequency 50 Hz

Shelf trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving, rack trolleys, embroidery trolleys -Dimensions: 1015/950/1830 mm -Material: stainless steel -Weight: 90 kg

Chimney, exhaust pipe, chimney stainless steel pipe -Chimney system: O 250 mm, not insulated -Quantity: 2 pieces of 1 m each -Price: complete -Dimensions: 250/250 / H1000 mm -Weight: 7 kg

Stainless steel tank standing 13,000 liters - 2 pieces in stock, Including insulation and agitator propeller. So far, they have been used for milk production. Approximate dimensions: Diameter: 2,100 mm, height incl. feet approx. 4,000 mm, height feet approx. 500 mm. Price ex works, delivery possible