stainless mixing tank used for sale

Homogenizing Mixer with Powderjet Manufacturer: Becomix Type RW 125 CD The machine went into operation in December 2007, built in 2006, very good condition, only ran in the laboratory Content usable volume 125 l, pharmaceutical version Product room vacuum and pressure-resistant -1/+2 bar, operating temperature 133 °C Boiler room pressure-resistant 4 bar, operating temperature 165 °C Scraper agitator, homogenizer with gap adjustment (Powderjet), water-cooled motor Becomix consisting of: 1x RW 125 CD Homogenizer including Cip/SIP 1x energy frame with all valves, vacuum pump, steam-heated 1x control cabinet with S 7 control and control panel with Promas CS 1x control cabinet with frequency converters Documents: technical documentation French, Promas manual, various CD ́s Documents with FAT, IQ, OQ

Laboratory homogenizer mixer Manufacturer: Becomix Type: RW 2.5 Content: 5 litres boiler capacity Technical specifications : Vacuum homogenizing system Mobile table version Usable space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Capacity 5 litres Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW Content 2 litres

NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit

Kieselgur mixing station comprising two vertical stainless steel mixing tanks, each fitted with a top-entry agitator and a central outlet., Additional title: Kieselgur mixing station comprising two vertical stainless steel mixing tanks, Capacity: 1300 l/vessel, Features: 2 stainles steel vessels with agitator, and podest, incl. fittings

Additional title: with carbonization, Vessel volume: 500 l, Vessel operating pressure: 1 to -0,15 bar, Vessel operating temperature: 130 °C, Features: flow meter (E+H), blending vessel with stirring unit (5 hl), control panel with push-buttons, carbonization with subsequent calming section, no pressure tanks, no panel

load capacity: 250 kg

• Stainless steel tanks / roll containers made of AISI 304 (V2A) • Volume: approx. 110 litres • Cylindrical design • Mobile thanks to 3 castors • Robust industrial design • Suitable for liquids (e.g. chemicals, paints, varnishes) • Not insulated, no pressure vessel • Used, with signs of wear • Stable and versatile • 5 pieces available Note for non-EU buyers: Buyers outside the European Union are responsible for all costs of customs clearance as well as applicable import duties, taxes and fees. Auction-ID: 04H-RXX-1

Cat. No. 08-1209 in very good condition! Content: approx. 25,000 litres 1 tank unit consisting of 4 chambers Dimensions: Width: 460 cm Depth: 580 cm Height: 435 cm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Cat. No. 08-1210 made of V4A - round standing - Condition: good Content: approx. 25,000 litres 1 tank unit consisting of 4 chambers Dimensions: Width: 460 cm Depth: 580 cm Height: 435 cm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Cat No. 14-00221 Eurolux Storage and Transport Tank Cubic - 750 Litres in AISI 304 stackable – NEW Multi-functional Tanks - pressureless Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height body tank: 800 mm Total Height: 1380 mm Outer Dimensions: 800 x 1200 mm Weight: 110 kg All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karl ...

12 x 14.800 ltr. VA4 completely Pasteurization tank, Holvrieka, round, used standing on feet, it will be only the lower tanks sold, ø 2.48 m, H: 3,80 m (2 St. 7.60 m), incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 20 x 10.200 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 2,10 m, H zs.: 7,40 m, incl. all armatures and pressure valves (excluding pressure relief valve), operating pressure: 1.5 bar, ZIP able, dished, adjustable feet, very good condition, the tanks can be sold separately 36 x 5.000 ltr. VA4 completely Pasteurization tank, Holvrieka, used, round standing on feet, stacked per 2 PCs ø 1.50 m, H zs.: 7 m, incl. all armatures and pressure valves (excluding pr ...

various large foods available: Always full wine-hater 220 l diameter: 550 mm Immer-weinhaelter 530 l diameter: 820 mm Immer-weinhaelter 1100 l Diameter: 1000 mm Immer-Weinhaelter 2200 l diameter: 1400 mm; NEW - best condition

Standing cylinder-conical tanks (distrib), fermentation tanks with 2 bar pressure tanks are built and ready for pickup in 35390 GieÃ?en Dimensions: Ã? 3.80 (including ISO) Ã? 12.5 m high insulation: 15 cm

Manufacturer: Hinke Model: ATS Sudmo Capacity: 6400 l Pressure tank up to 5 bar

Producer: Bolz Producer: Sinks Allgau Capacity: 500 l The tank is equipped with 2 probes to measure the filling level.

Producer: H & K Model: CIP system Capacity: 1500 l Year of construction: 1983 The tank is equipped with a liquid manometer.

Preparation of crystal sugar We can offer you a complete system for dissolving and pasteurizing crystalline sugarThe device includes:-Pasteurizer KZE , producer: Schmidt, year: 1997 3-reservoir, double coat (heating-cooling) capacity of one tank: 800 l.dimensions: the height of the tank: 1100 mm, diameter: 1400 mm, total height: 2200 mm

Stainless steel tank (4 pieces) -single-walled -with cover -outlet valve -on pallets

V10 - used approx. 32 m³ / 32,000 litres stainless V4A steel tank, transportation tank, insulated, with 3 internal walls, on a steel frame. technical details: capacity: approx. 32 m³ / 32,000 litres material: stainless V4A steel tank, Inox, AISI 316L: WNr. 1.4404 (X2CrNiMo17-12-2), (V4A, A4L) Austenitic, stainless steel, L stands for low carbon content. use: for mechanical components with increased corrosion resistance requirements, especially in chloride-containing media and for hydrogen. AISI 316L is used in a wide range of fields, in the pharmaceutical industry (manufacture of cleaning, disinfection and drying machines), in medical and dental technology, as well as in swimming pool construction. weight: approx. 4 t without frame test pressure: 4 bar dimensions: approx. 2.00 m x 9.00 m; total height incl. frame approx. 2.70 m Other: Used tank in good condition,  ...

Transport tank made Hermann Waldner type 4500, in a good used and functional condition. Completely made of stainless steel, 1000 litres of filling volume. Dangerous goods type approval BAM 0301 / 31A. Large lid hatch, bottom drain valve. Mounted on base. Dimensions W/D/H 100/20/175 cm. Further on request.

12,000 litres of mash agitator tanks with lateral agitator from V2A available: 5 pieces Dimensions: Ges. Height: approx. 3800 mm Zyl. Height: approx. 2150 mm Diameter: approx. 2350 mm Material: V2A - AISI 304, 1.4404 Surface: Inner IIID, outside 2B=IIIC Topsoil: - With cone bottom - With threaded fittings see photos Cylinder bottom: - with agitator mixer 1.1 kW on the side - with manhole 330 x 430 mm - with threaded nozzle DN 25 - with diving sleeve - with threaded nozzle DN 50 rear Underbody: - with pointed cone bottom - with 3 feet with calottes, height adjustable - with forward-drawn outlet DN 65

high-quality stainless steel tanks, standing on feet, made of V4A stainless steel Volume: 12.5 m3 Dimensions R26: 2.35 m x 4.30 m high incl. feet, with cooling grille and insulation Dimensions R25: 2.35 m x 3.10 m high incl. feet Dimensions R24: 2.35 m x 3.10 m high incl. feet

USED STAINLESS STEEL 16.000 LITRES JACKETED TANK WITH INNER COIL REF.: C6285 Vertical tank made of stainless steel with a total capacity of 16,000 liters. Klopper top bottom with manhole, sight glass, sight glass for spotlight, lifting lugs, central stirring flange and flange-type connections. Jacketed klopper lower bottom with inner coil and bottom discharge. On 4 brackets. General characteristics: Material Stainless steel Technical characteristics: Capacity 16.000 litros totales Bottom type Klopper Camisa En el fondo inferior On 4 brackets Ears x2 Man hole x1 Peepholes x2 Vessel outside diameter 2500 mm Vessel height 2750 mm Vessel height + funds (TOTAL: 4400 mm)

USED STAINLESS STEEL 40.000 LITRES TANK REF.: C9070 Horizontal tank made of stainless steel by AGUILAR Y SALAS with a capacity of 40,000 liters. General characteristics: Manufactured by AGUILAR Y SALAS Material Stainless steel Year built 1987 Weight 4060 kg Design pressure atm Design temperature 35 ºC Test pressure lleno de agua Technical characteristics: Capacity 40.000 l Bottom type Klopper Vessel outside diameter 2800 mm Vessel height 5500 mm

USED 10000 LITRES STAINLESS STEEL 316 TANK WITH 18 M2 EXCHANGER REF.: C3315 Horizontal tank made of 316L stainless steel with a capacity of 10,000 liters. 2000x3500x10 mm shell 8 mm thick klöpper bottom In the top bottom shell there is a DN450 manhole, a connection to the DN500 column, two DN50 supply inlets, a DN40 safety valve, two pressure probes 1/2 "Gas, a DN25 nitrogen inlet At the bottom there is a DN80 outlet On the side there are 3 outputs for DN80 sight glasses and a DN25 temperature probe On one bottom there are two DN80 outputs and on the other bottom there is an exit with DN300 coil. On 4 legs. General characteristics: Material Stainless steel 316L Technical characteristics: Capacity 10.000 L Bottom type Klopper

Stainless steel tank standing 10,000 liters capacity, insulation, agitator propeller, approximate dimensions: diameter 2,100 mm, total height incl. feet 4,000 mm, height feet: 500 mm, use so far: milk, price ex works, delivery possible.

- 3 fermentation tanks, Fabr. Kaspar Schulz, with á 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tanks, coolable over 1 frame cooling zone, with manhole in the frame below and hefeluke in the frame above, with cleaning line, sampler, spout, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 2,843 lt. content, pressureless (0 bar), standing, in VA, flat-bottom tank, coolable via 1 frame cooling zone, with manhole in the frame below and sight glass in the frame above, with cleaning line, sampler, outlet, ladder bracket, built in 1989, Ø: 1,500 mm, H: 2,400 mm, already dismantled.

Stainless steel container standing 6,000 liters, insulation - 1 x yes, 1 x no; Approximate dimensions: diameter: 1,850 mm, total height incl. feet: 3,300 mm, height feet: 700 mm, height container 2,300 mm without cone Use so far: lye or acid

- 2 fermentation tanks, Fabr. Kaspar Schulz, with á 5.005 lt. content, pressureless, standing, in VA, flat bottom tanks, coolable over 2 Frame cooling zones, with manhole in the frame below and sight glass in the frame above, with cleaning line, Sampler, outlet, conductor bracket, YOC 1997 and 1999, Ø: 1,800 mm, H: 2,650 mm, already dismantled. - 1 fermentation tank, Fabr. Kaspar Schulz, with 5,016 lt. capacity, 0.9 bar, standing, in VA, flat bottom tank, coolable over 2 Frame cooling zones and 1 floor cooling zone, with manhole in the frame below and sight glass in the frame above, with Cleaning line, sampler, spout, ladder bracket, built in 1992, already dismantled.

Wheat beer fermentation tank, Fabr. Schulz, with 55.02 hl content, standing on calotte feet, in stainless steel, coolable over 2 cooling zones in the frame, with manhole in the lower half and hefeluke with visible glass in the upper half, with spray head, pulled down cleaning line, floor display via hose and measuring rod, with sampler, ladder bracket, with spout, built in 1996

- 1x 5.055 lt. storage tank, Fabr. Kaspar Schulz, 0.0 bar, flat-bottom tank, standing, in VA, with pulled down Cleaning line, sight glass above, manhole in the lower frame, ladder bracket, YOC 1994. - 2x 6,326 lt. storage tanks, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentanks, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, sampler, YOC 1989, - 1x 8,022 lt. storage tank, Fabr. Kaspar Schulz, 0.9 bar, Klöpperbodentank, standing, in VA, with pulled down Cleaning line, manhole in the lower frame, YOC 1989.

Stainless steel container, transport container 250 liters Content: 250 Ltr. Working pressure: 0.9 bar, according to type plate, without papers, test pressure 2.0 bar Material: Stainless steel, 1.4301 Design: round, standing, on 4 feet, with welded construction for use by forklift or pallet truck, Outlet with disc valve DN 50, in the upper lid DN 125, 1 x safety valve, 2 x quick coupling connection for CO², Total weight 57 kg last use: Food Height: approx. 1,515 mm Diameter: approx. 625 mm

For sale: - vertical tanks with a capacity of 35,000 liters and 30,000 liters. - tanks dismantled

2 pieces of lying fermentation tanks, Fabr. Gresser, lying in storage saddle: each 6,550 lt capacity, 0.0 bar, coolable via half-tube coils in the cylinder Manhole in the front floor Spout Sampler Cleaning line Ø: ~1,900 mm, L: ~3,400 mm.

Process tank -crystallizer. Capacity: 8 m3 Cooling / heating jacket thermal insulation stirrer

Technical data: V- 36 hl, 1.5 bar, stainless steel producer: Steinecker / Germany volume: 3.6 m3 pressure: 1.5 bar two cooling zones with chilled water propeller stirrer drive

Stainless steel tank, stainless steel tank used Manufacturer: E.S. Planungs-u. Rohrbau GmbH Year of construction: 1994 Volume approx. 9 m³ External dimensions : approx. 2.4 x 2.6 x 1.9 m Changes and errors in the technical data, information and prices as well as prior sale reserved.

Manufacturer: unknown Capacity: ~750 l Year of construction: 2000 Standing on 3 feet CIP-capable Manhole available Material: V2A / AISI 304 Condition: good

1 of used CCT Cylindro Conical Tank / DPV Dual Purpose vessel, manufactured by Staes of Belgium, vertical cylindrical conical stainless steel vessel mounted on four legs. Overall height approx. 5.162 mm, OD 2.000 mm, ID 1.850 mm, 6.500 liters working / fermenting capacity (approx. 8.000 liters brim full), SWP 3 Bar, CE and PED compliant. Top and side entry manway, C.I.P Pipe and a selection of valves and fittings. 9 available (3 of which with top and side entry manway, and 6 with side manway only).

Qty. 1 Second-hand vertical fermentation tanks Mfc.: Holvrieka, Schmidding, Ellinghaus Built: 1991, 1996 Capacity: 24 x 1450 hl & 4 x 237 hl N° Name Producer Year Data Comments 1 Fermentation tanks Holvrieka 1991 1450 hl 2 tanks 2 Fermentation tanks Schmidding 1996 1450 hl 16 tanks 3 Fermentation tanks Ellinghaus 1991 1450 hl 6 tanks 4 Fermentation tanks Ellinghaus 1991 237 hl 4 tanks

(Exhibition model) - Material : DIN 1.4301, upper bottom and dome made of DIN 1.4404 - Surface, inside: III d, weld seams pickled and ground - Exterior surface : marbled - Capacity : approx. 2400L Dimensions : - Depth : approx. 1310 mm - Width : approx. 1080 mm - Cooling jacket height: approx. 1750 mm - Height of the shelves : approx. 450 mm - Total height : approx. 2570 mm Equipment : - 4 adjustable feet - Rectangular manhole 420x320 mm - Residual drain with disc valve NW40, Fredrich no 2 NW40 - Clarification drain with ball valve NW40, Fredrich no 2 NW40 - Stand display - Sampling - Thermometer, digital - Double jacket with piping pulled upwards - Labeling board - Ladder bracket - Dom NW 300 Vent Nozzle NW 50 - Crane straps

Exhibition model) - Material : DIN 1.4301 - Inner surface: IIId, welds stained and ground - Outer surface: Sheath sanded-SBR - Volume : approx. 1940L Dimensions: - Diameter : approx. 1110 mm - Sheath height : approx. 2000 mm - Ground clearance: approx. 400 mm - Total height with boom : approx. 2900 mm Equipment : - 3 adjustable feet - Rectangular door 420x320 mm - Residual drain with ball valve NW50, DIN 11851 - Clear drain with ball valve NW50, DIN 11851 - Stand indicator with handwheel - Sampling with handwheel - Dip shaft sleeve with digital thermometer - Pillow plate - Holder for labeling board - Ladder bracket - Mobile lid with NW50 connection, pump and air hose - Winch to lift the lid

Stainless steel tank 3500 litres with SCABA agitator and measuring technology Manufacturer: SCABA Tank Type: Stainless Steel Tank with Agitator Volume: 3500 l Year of Make: 1997 Quantity available: 2 pieces Agitator: SCABA Motor power: 0.37 kW Degree of protection: IP55 Load cells: FLINTAB Type: SB4-5kN-GP Metrology: Endress+Hauser Liquiphant Power supply: 10-55 V DC Equipment and accessories Agitator completely assembled Internal mixing system with stirring blade Manhole with lid Filling opening with grid insert Level sensor Endress+Hauser Liquiphant FLINTAB load cell system integrated in the base frame Outlet at the bottom with connection

Stainless steel tank, stainless steel tank, separator, filter tank, for plastic injection molding machine -Stainless steel tank: separator -Diameter: see photos -Reservoir: with sight glass -Total dimensions: Ø 248 x 435 mm -Weight: 17kg

V23 - used approx. 28.5 m³ / 28,500 ltr stainless steel tank V4A container tank, insulated, heatable and coolable. technical details: capacity: approx. 28.5 m³ / 28,500 litres material: stainless steel V4A dimensions: approx. Ø 2.50 m × L 9.20 m × H 2.60 m without railing Used V4A stainless steel tank, professionally cleaned and in good condition. Horizontal storage tank, container tank, insulated by approx. 20 cm glass wool / rigid foam, heatable or coolable. With foldable railing, 2x lid on top of the roof, several inlets and outlets. The tank is being sold as shown in the pictures. Can be used as storage tank for many different media such as water, liquid feed, whey, potato steam trays, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc. Price upon request. Transport can be arranged at low cost. It is not possible to update al ...

Tank material: Stainless Steel 304 2B x 3.0mm thk plate. Direct Drive system: 3HP X 415V IE3 6 Pole Flange Mounted Motor c/w TPG helical gear reducer with grease vertical moulting Model: GVS-50-R60, Torque: 1065NM 2 set Stainless Steel Channel Blade c/w Dia. 1.5" SUS304 shaft 2 nos Dia 2" SUS 316 Ball Valve c/w Aluminium Quick Coupler 4 set of 150mm & 76mm x 1800mm M/S Channel as tank support 1 set #100 SUS Removable Filter 14 units internal Dia. 12mm S/S step ladder Tank size: 2400mm (D) x 4500mm (H) Semi-open tank cover with butterfly hinges Completed with Direct drive stirrer system PLEASE CONTACT AARON: 0173698203 (MALAYSIA NUMBER) Located at Factory 42

Tank, container WABAG / LUDWIG EDEL 43.9631.46.01 Content: 7600 liters year: 1991 zul. Operating pressure: 0.1 bar permissible Operating temperature: 40°C Diameter: Ø 2330 mm stainless steel ! used, tested ! Dimensions: 2590 x 2450 x 2300 mm