stahl folder used for sale

Clamping angles, clamping angles, tombstones, clamping devices, mechanical clamping elements -Clamping angle: for workpiece clamping -Dimensions: 165/250/H127 mm -Wall thickness: 20 mm -Number: 1x angle available -Price: per piece -Weight: 12.4 kg/piece

Hacker feed roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Feed roller: serrated -Roll diameter: 270 mm -Transport roller width: 626 mm -Total length: 626 mm -Shaft mount: 80 mm -Quantity: 1x piece available -Weight: 137 kg

Clamping angle, clamping tower, clamping device, mechanical clamping elements -Clamping angle: for workpiece clamping -Dimensions: 450/245/H365 mm -Wall thickness: 26 mm -Surface: milled -Holes for workpiece clamping: 18/22/25 mm -Quantity: 1x angle available -Weight: 56 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 210 mm -Short taper: 5 (82.5 mm) -Number: 2x discs available -Price: per piece -Weight: 5 kg

Forklift tipping container, tipping container, tipping trough, forklift tipping, waste tipping container, scrap tipping container -Condition: New -with steel lid: made of galvanized sheet -Content: 0.8 m³ -Intake: for forklift tines -Max. Tine width: 150 mm -with tilt mechanism -Storage: stackable -Corrosion protection: powder coated -Dimensions: L /W/H 1750/750/870 mm -Number: several available -Price: per pieces -Own weight: 200 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 80 mm -Transport roller width: 800 mm -Total length: 830 mm -Sprocket: 1/2 x 11 teeth -Thread: M8 -Number: 41x rolls available -Price: per piece -Weight: 4.1 kg/piece

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Number: 1x prism -Price: complete -Dimensions: 210/85/H226 mm -Weight: 14 kg

Plummer block housings, bearing blocks for shredders, crushers, water mills, chippers, cutting mills, granulators, and cutting granulators -Quantity: 1 piece heavy-duty steel pillow block housing -Type: Bearing block, inner diameter: 320 mm -Axis/Center of housing: 190 mm -with: shaft seal discs -Quantity: 1x bearing block available -Suitable for: Bearing abbreviations 22236/22330/23064/23138/23236, not included in the scope of delivery -Suitable for: Bearing abbreviations 22236K/22330K/23064K/23138K/23236K, not included in the scope of delivery -Dimensions: 560/190/H395 mm -Weight: 228 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Roller diameter: 80 mm -Transport roller width: 490 mm -Total length: 520 mm -Shaft diameter: 12 mm -Number: 109 rolls available -Price: per piece -Weight: 2.3 kg/piece

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 115 mm -Transport roller width: 380 mm -Total length: 420 mm -Shaft mount: 40 mm -Two-edge: 25 mm -Number: 4x rolls available -Price: per piece -Weight: 12 kg/piece

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Hand lever shears -Material thickness: max. 2 mm -Blade length: 200 mm -Dimensions: 790/540/H1715 mm -Weight: 28 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 16 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 1x available -Weight: 3 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 38 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 1x available -Weight: 7 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 33 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 4x available -Weight: 6 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Beam width: 100-150 mm -Payload: 1000 kg -Number: 1x drives available -Price: per piece -Dimensions: 370/405/H340 mm -Own weight: 47 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: stable -ripping teeth -Width: 790 mm -Height: 500 mm -Depth: 700 mm -Socket: Ø 40 mm -Width inside: 150 mm -The mounting on the spoon can be changed by us at an additional cost -Own weight: 108 kg

Backhoe bucket, excavator bucket, demolition bucket, trench bucket, excavator bucket -Execution: stable -Width: 595 mm -Height: 680 mm -Depth: 700 mm -Admission intermediate dimension: 180 mm -Bore mounting: Ø 51 mm -The mounting on the spoon can be changed by us at an additional cost -Net weight: 152 kg

Backhoe bucket, excavator bucket, demolition bucket, trench bucket, excavator bucket -Execution: stable -Width: 485 mm -Height: 450 mm -Depth: 620 mm -Admission intermediate dimension: 141 mm -Bore mounting: Ø 40 mm -The mounting on the spoon can be changed by us at an additional cost -Own weight: 90 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Feed flange for: drive heart, three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 185 mm -Short cones: 6 -Quantity: 1x disc available -Weight: 4 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 705 mm -Thickness: 25mm -Recess: 270 mm -Short cone diameter: 192/217 mm -Hole circle: Ø mm -Weight: 71 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 748 mm -Rezess: 350 mm -Hole circle: Ø 600 mm -Weight: 100 kg

Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 160 x 45 mm -Clamping depth: max. 250 mm -Dimensions: 470/290/H160 mm -Weight: 40 kg

Punch holder, die holder, punching tool, punch, punching die, punching punch -Matrix size: 13.7 mm -Matrix holder: for punching in the legs -Dimensions: 200/120/H90 mm -Weight: 8.7 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -only one tool available (counter tool missing) -Shearing tool for channel steel: 30 mm, 60 mm -Type: 441216084902 -1x dimensions: 210/220/H30 mm -Weight: 9.9 kg

Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch punch -Shearing tool for T-steel: 120 x 70 mm -Square: 25 mm -Round: 27mm -Type: 50305 -Dimension respectively: 175/140/15 mm -Weight: 5kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for U-steel: 80 mm -Type: 441215124701 -Type: 441215124702 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 120 mm -Type: 441215124901 -Type: 441215124902 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 50 mm -1x dimensions: 140/140/H30 mm -1x dimensions: 135/135/H30 mm -Weight: 8 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for channel steel: 50 mm -Type: 440065124502 -Type: 440065124501 -1x dimensions: 136/130/H25 mm -1x dimensions: 128/132/H25 mm -Weight: 6 kg

Punch holder, die holder, punching tool, punch, punching die, punching punch -Die cut size: 9 x 25 mm -Groove between punch and scraper: 5 mm -Dimensions: 200/140/H170 mm -Weight: 12 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 218 mm -Transport roller width: 790 mm -Holder with needle bearing plate: 140 x 140 x 19 mm -Flange mounting inside: Ø 110 mm, bolt circle Ø 140 mm -Number: 4x rolls available -Price: per piece -Weight: 40 kg/piece

Clamping angle for workpiece clamping, measuring device -Dimensions: 400/350/H230 mm -Thickness: 35 mm -Groove: 15 mm -Surface: milled -Weight: 48 kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Take shaft: SK60 -2x sleeve: MK1 -2x sleeve: MK2 -2x sleeve: MK3 -2x sleeve: MK4 -2x sleeve: MK5 -Weight: 48 kg

Bending tool, die, upper knife, upper tool, upper beam -Tool: for folding machine -Dimensions: 60 x 15 mm -Length: 1020 mm -Weight: 6 kg

Bending tool, die, lower knife, lower tool, lower jaw -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg

Bending tool, die, upper knife, upper tool, deer foot tool -Tool: for press brake -Tool radius: mm -Dimensions: 30 x 169 mm -Length: 2500 mm -Weight: 89 kg

Forklift tipping container, tipping container, tipping skip, forklift skip, waste tipping container, scrap tipping container -Condition: NEW -Contents: 0.8 m³ -Steel sheet: 3 mm -Mounting: for forklift tines -Max. tine width: 150 mm -with tilting mechanism -Storage: stackable -Corrosion protection: Powder-coated -Dimensions: 1750/750/H870 mm -Quantity: 6 pieces available -Price: per piece -Weight: 180 kg

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -Intermediate plate: for hydraulic press, eccentric press, injection molding machine -with: groove for centering -Width: 380 mm -Length: 1520 mm -Height: 55 mm -from: 2 sides milled -Groove: 21 x 15 mm -Weight: 250 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake -Tool radius: mm -Dimensions: 14 x 94 mm -Length: 2500 mm -Weight: 20 kg

Bending tool, die, upper knife, upper tool, straight tool -Handover in the current condition as seen -partially damaged -Tool: for press brake -Dimensions: 35 x 154 mm -Length: 2653mm -Weight: 79.5kg

Bending tool, die, bottom knife, bottom tool, prism tool, beading tool -Dimensions in the pictures -Tool: for press brake -Tool: with radius 1500 mm -Beading height: 8 mm -Tool gap: 2.5 mm -Tool: is guided -Tool intermediate dimensions: 900 mm -Transport dimensions: 1200/200/H230 mm -Weight: 210kg

Bending tool, die, bottom knife, bottom tool, prism tool, beading tool -Tool: for press brake -Prism width: 16 mm -Tool: shared -Tool: is guided -Tool intermediate dimensions: 1430 mm -Transport dimensions: 1550/200/H235 mm -Weight: 250kg

Cleaning container, safety container, cleaning container -Material: sheet steel -Container: Ø 295 x 235 mm -Strainer basket: Ø 265 x 100 mm -Number: 3x devices available -Price: per piece -Dimensions: 310/370/H740 mm -Weight: 8 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1000 mm -Length: 1295 mm -Height: 910 mm -Plate thickness: 28 mm -Wall thickness underframe: 5 mm -Transport dimensions: 1450/1000/H1100 mm -Weight: 570 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 305 mm -Short taper: 8 -Number: 1x discs available -Price: per piece -Weight: 15.3 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 230 mm -Short taper: 102 mm -Number: 3x discs available -Price: per piece -Weight: 9.7 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: stable -ripping teeth -Width: 570 mm -Height: 540 mm -Depth: 980 mm -Take: Ø 50 mm -Width inside: 189 mm -The mounting on the spoon can be changed by us at an additional cost -Dimensions: 1060/570/H700 mm -Own weight: 142 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 207 mm -Short taper: 6 -Number: 1x discs available -Price: per piece -Weight: 6.8 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Feed flange: for drive heart, three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 218 mm -Short cones: 6 -Bolt circle: Ø 155 mm -Bolt spacing: 110 mm -Quantity: 1x disc available -Weight: 9.2 kg

Clamping plate, welding table, welding table, straightening plate, workbench, work table -Diameter: 700 mm -Height: 810 mm adjustable -Sheet thickness: 19 mm -Number: 1 table available -Price: per piece -Weight: 88 kg/piece