127,890 used machines on RESALE, but how to find them? Machine Search
end mill, end mill, milling cutter -Outer diameter: 125/H60 mm -Teeth: 8 -Weight: 3 kg
Tool holder, milling tool holder -Number: 7x SK50 recording -Inner diameter: 32 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Sale: only complete set -Weight: 4.6 kg
Tool holder, milling tool holder -Number: 4x SK50 recording -Inner diameter: 12/16/20/25 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Sale: only complete set -Weight: 15 kg
Tool holder, turning tool holder, tool holder, turning tool, turning tool holder -Dimensions of perforated plate: see pictures -Dimensions: 175/165/H65 mm -Weight: 6.6 kg
Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 210 mm top -Outer diameter: 220 mm below -Quantity: 2 sets of milling cutters Price: complete -Weight: 16 kg
Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Collet chucks: Ø 11-20 mm -Weight: 3.5 kg
Machine vice, vise -Jaw width: 250 mm -Jaw height: approx. 80 mm -Clamping depth: max. 310 mm -Weight: 120 kg
Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Outer diameter: Ø 42 mm -Thread: M40 x 1 mm -Total length: 116 mm -Quantity: 94 pieces Total price: 100 EUR -Weight: 35 kg
Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 -Clamping sleeves: 28/85 mm Price: per piece -Quantity: 16x Available -Weight: 1.2 kg/piece
Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 -Cone: Ø B11/B16 -Price: complete -Quantity: 2 available -Weight: 2 kg
Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Sizes: various -Sale: only as a package -Weight: 0.8 kg
End mill, shank mill, milling cutter -Two-knife -Finish cutter -Diameter: 14 mm -Usable length: 30 mm -Corner radius: 0.7 mm -Carbide: equipped -Quantity: 88 pieces Price: per piece -Weight: 8 kg
Disc cutter, saw blade, cutter -various: manufacturers -Various diameters: Ø 45 mm - Ø 90 mm, width 1 mm - 8 mm Type: HSS -Sale: only complete set -Weight: 8 kg
fixed point, fixed center point, fixed Morse taper, fixed center point -Toe: shaft-mounted -Photo: see pictures -Weight: 1 kg
Depth gauge, caliper, vernier caliper, vernier caliper -Measuring range: 0-300 mm -Fine-tuning -long measuring jaws -Number: 4x depth gauges available -Price: per piece -Weight: 0.6 kg
Assembly star, assembly table, workbench, welding table, clamping plate, gluing press, gluing star, glue press, gluing stand, rotating device, container rotating device, welding rotating device -Cube size: 750 x 750 mm -Working width: 750 x 4000 mm -Geared motor: 0.18 kW -pneumatic disc brake -Foot switch -Dimensions: 5250/1100/H2750 mm -Weight: approx. 800 kg
Tapping chucks, thread chucks, tapping chucks -with slip clutch -Cutting capacity: max. M16 -Recording: MK3 -Weight: 3.2 kg
Clamping plate, welding table, welding table, straightening plate -Width: 750 mm -Length: 1000 mm -Height: 850 mm -Surface: milled -partly with threaded holes -Drawer -Plate thickness: 30 mm -with supporting ribs -Weight: 256 kg
Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 3x201/1x190 mm -Cone: 82 mm -Hole circle: Ø 105 mm -Number: 2x discs still available -Price: complete -Weight: 11 kg
Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: approx. 26 m -for electric cable winch -other crane ropes are also available -Weight: 9 kg
Steel Holder Head Waldrich Stand Metal Long Planer Slotting Machine Schepping Total weight approx. 100 to 150 kg. Good used condition, worked until the end, only the spur gear at the rear shows signs of wear. The offer is for the head, which is height-adjustable with the handwheel. It was dismantled from the actual machine. The support plate on the boom, which is connected to the large trapezoidal spindle is NOT included. The side head is also still in stock, but NOT included in this offer. With a heavy heart, I dismantled the parts from a superbly preserved planing machine. The machine was in the basement of a machine factory and it was not economically possible to replace this . It was apparently put there earlier and then a wall was bricked up. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act. ...
Size: 520 x 840 mm Equipments: flat pile feeder FI-52 with TREMAT Station I with 6 folding pockets 1.TI-52 Station II with 4 folding pockets 2.TI-52 Noise reduction hoods Mobile delivery SAK-56
used
SILO CELL BLOCK DAM WALL SCREW GALVANIZED Hopper with access hatch IMMEDIATELY AVAILABLE Mob. +491715213204
Pile feeder - Tremat head 4 buckles Anti-noise hood Batch counter Compressor Belt delivery
Fully automatic Rotary feeder 1st unit : 6 buckles RFH-82 2nd unit : 4 buckles BUH-82 3rd unit : 4 buckles BUH-66 SPH-70 belt delivery
Checked and cleaned Good working conditions
: neu : EC0006 : 468 € : 1 for tubing diameter: 2 gas / 60,3 mm R150: Hex50: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : EC0002 : 303 € : 1 for tubing diameter: 1 gas / 33,7 mm R82: Hex40: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
