stahl 78 used for sale

Description 32-page heidelberg Stahlfolder Topline TD 78-6-4-PD with VFZ 52 D and VSA 86 D from 2003 consisting of PD 78-T pallet feeder with tremat and DCT-2000 control 1. Folding unit TD-78 with 6 folding plates 78 cm Downstream cutting shaft Double device 2. Folding unit TD-66 with 4 folding plates 66 cm Downstream cutting shaft equipped with overhauled folding rollers and bearings Mobile folding unit for 32-sided folds Knife folding unit VFZ-52. D

Description Blank connector for Heidelberg Stahlfolder KH or TH folding machines

Description Pneumatic altar fold/window fold pocket 56 cm with Acc 2.4 control unit and photoelectric sensor for Heidelberg KH and TH folding machines with motorized pocket adjustment Digital control with ACC 2.4 for exact determination of switching times Up to 15,000 cycles per hour Minimum flap spacing of 0.5-1 mm depending on paper thickness

Description Mobile counting and marking device Transfer table Heidelberg Stahlfolder MKE 86 with MCT control Infeed width 86cm

Description ACC 2.2 control unit for glue device or window rebate pocket Pneumatic window rebate pocket FFP 78cm infeed width with infeed sensor Digital control with ACC 2.4 for exact determination of switching times Easy operation, short setting time Up to 15,000 cycles per hour possible in continuous operation Minimum flap spacing of 0.5-1 millimetre depending on paper thickness Particularly flat design, use in any pocket position

Description Year of construction 2007 Working width 86 cm with press with marking device Infinitely variable height adjustment MCT control with round plug Coupling box to DCT available on request

Description The delivery system has a high storage capacity for folded or stapled signatures and is therefore particularly suitable for processing medium and long runs. Large stacking volume of folded or stapled products, even for difficult papers Working width 66cm, up to 3 times Height adjustable for use on folding machines and saddle stitchers Productive one-man operation of the composite folding machine and delivery system Marking device DCT control Infeed height 36-96cm Stack length max. 80cm max. format 66x30cm min. format 12x10cm Product thickness max. 4 mm pressing force

Technical key data: Year of manufacture: June 2015 Width: approx. 19.00 m Length: approx. 25.00 m Eaves height: approx. 4.50 m Construction: hot-dip galvanized steel frame construction (bolted) Building position: free-standing on three sides, a gable wall attached to a lower intermediate building Roof & wall: insulated sandwich panels Construction & Reusability: Hot-dip galvanized, bolted supporting structure → can be optimally dismantled Very well-preserved sandwich panels → almost 1:1 reconstruction possible Core advantage: real second-life hall with minimal loss of substance Roof & lighting concept: Trapezoidal sheet metal sandwich roof continuous ridge skylight strip Additional suspended LED lights Result: very bright, energy-efficient hall Gates & Usage: 2 sectional doors with light segments Suitable for forklifts, vehicles and logistic ...

Description with side parcel extension SPA Twin for mark-free laying out max. format 500x340mm min. format 100x100mm Product thickness max. 6mm High storage capacity Stacking height per level max. 10cm Optimal for one-man operation on folding machines at high machine speed up to 18,000 cycles User-friendly, ergonomic acceptance

Description Mobile presetting device for knife shafts outside the folding machine for working widths of up to 112 cm

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 31 mm -Dimensions: 265/150/H200 mm -Weight: 18.7 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box, pressing tool, clamping support, square profile, shim profile, square block -Square block: with through holes -Bore: Ø 78 mm -Number: 4x profile available -Price: per piece -Dimensions: 300/200/80 mm -Weight: 27.9 kg/pc.

Height indicator, parallel indicator -Max. Working height: 500 mm -Hard metal needle -Dimensions: 230/80/H650 mm -Weight: 3.4 kg

Description Mobile, height-adjustable sword folding unit to complement pocket and combination folding machines Low investment for increased versatility in the folding types As a third folding station for user-friendly U-shape By swivelling the sword folding unit by 180 degrees, the International Fourfold is folded for connection to machines with DCT control

Description for Stahlfolder Ti 36 or Ti 40 built in 2003

Height indicator, parallel indicator -Max. Working height: 500 mm -Hard metal needle -Dimensions: 615/120/H75 mm -Weight: 2.7 kg

mezzanine, area approx. 2,960m2, load capacity 500kg/m2, incl. small goods lift - used - : Price ex site: only 145.000.-€ (net) incl. dismantling, packed and loaded! Only 49.-€ / m2 Price for a larger subset on request! Supplier: unknown (to be determined) Type: Steel Mezzanine Floor Year of construction 2019 Load capacity: min. 500kg/m2 (exact details are still missing) Basic dimensions: approx. 80 x 37m UK (lower edge) beam: approx. 3.09m Column spacing: approx. 6.60m x 5.86m Thickness of the supports: approx. 12 x 12cm Height of sigma profile: approx. 35cm incl. chipboard 38mm incl. railing all around (approx. 1.10m high) incl. pallet transfer stations incl. LED lighting 6 staircases incl. goods lift / goods lift Manufacturer: WEP, Year of Make: 2021 Payload: 500kg Condition: good to very good Available: immediately (still to be dismantled) Loca ...

Description The device has an Acc 2.4 control unit, decoder (rotary encoder) and machine console, suitable for steel folding machines. The three-fold window rebate (altar fold) is a type of fold that is often used by graphic designers, but with the folding technology available to date, it required a lot of experience and sensitivity from the bookbinder in order to carry out the job in the calculated time with good folding quality. The pneumatic window rebate pocket is digitally controlled, and the deflection profile is opened and closed pneumatically. The ACC 2.4 digital control unit precisely regulates the switching times – individually

Clamping angle, clamping aid - Clamping angle for workpiece clamping -Dimensions: W/H/L 600/600/600 mm -Thickness: 28 mm -Weight: 238 kg

Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 46 mm -Dimensions: see photo technical drawing -Dimensions: 100/60/H49 mm -Weight: 1.7 kg

Description Infeed width 46 cm Double capacity DCT control marking device

Description Max. format: 52 x 36 cm Min. format: 12 x 10 cm Speed: 160 m/min Mobile, height-adjustable sword folding unit to complement pocket and combination folding machines Low investment for increased versatility in the folding types As a third folding station for user-friendly U-shape The international four-fold fold is folded by swivelling the sword folding unit by 180 degrees For connection to machines with MCT control with round plug Connection behind a steel saddle stitcher is possible via an optionally available coupling box

Winch rope, crane rope, lifting rope, wire rope, stainless steel rope, forestry winch rope -Crane rope: Winch rope Ø 14 mm -Length: 35 m -other crane ropes also available -Transport dimensions: Ø 500 x 120 mm -Weight: 30 kg

Description Motorized ruler, roller and fold pocket adjustment 2 pockets 56cm infeed width

Description MCT control, various substructures for changing the infeed height (currently infeed adjustable from approx. 83-97cm), ruler stop as FW 2, 4 pockets 66cm, infeed width, 2 blind pockets, double downstream knife shafts with lift kit (tools as shown)

Description Heidelberg Stahlfolder pneumatic window rebate bag FTF 52 with Omron photocell with steel ACC 2.4 control unit with console and compressed air maintenance unit Compressed air required on site

Winch rope, crane rope, lifting rope, wire rope, stainless steel rope, forestry winch rope -Crane rope: Winch rope Ø 14 mm -Length: 46 m -other crane ropes also available -Transport dimensions: Ø 530 x 140 mm -Weight: 39 kg

Description Fully automated Heidelberg steel folder CH 56-6-BUH-FFH with shingle press delivery SPH 70 from 2018 in top condition Highly flexible combi folding machines for the many small jobs of everyday life Plano format max. W × L (cm) 56 × 90 Plano format min. W × L (cm) 14 × 18 Paper weight (g/m²) 40 – 250 -MCT touch control -Flat pile feeder with tremat and side blowers -6 motor-adjustable folding pockets -Motor-adjustable folding rollers -Motor-adjustable cross fold, sword, horizontal pocket, daggerboard -with ACC 2.4 control unit -With cold-glue device with a glue head

Crane remote control, crane control, crane control, pendant control, control switch, control unit, control control -Manufacturer: Steel, control switch crane remote control -Type: SWH3 -Dimensions: 360/65/65 mm -Weight: 0.8 kg

Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punching die, knife plate -Shearing tool: Knife plate punch die for profile steel, 6 pieces Sizes: see photos -Submission/Price: complete -Dimensions each: 188/188/H40 mm -Weight: 10 kg/pc.

Description Heidelberg Stahlfolder Shed Delivery SAK 66 D 1996 DCT Control

Description Heidelberg Stahlfolder Shed Delivery SAK 66 MP-ME D

Description Heidelberg Steel Folder Bags Folding Machine TF 56-4-4-F SAK 56 with Cross Fold VFZ 52.2 from 1996 Format 56 x 84cm Flat Pile Feeder with Tremat and PCS 100 Preset Counter 1st Station 4 Pockets 56 cm and Downstream Knife Shaft 2nd Station 4 Pockets 56 cm and Downstream Knife Shaft 1 Mobile Scaling Delivery SAK 56 with Marking Device 1 DV Pump 1 Electromagnetically Working Window Rebate Pocket Analogue Steel VFZ 52.2 Sword Folding Unit from 1996 -Mobile, height-adjustable knife folding unit -As a second or third folding station for user-friendly folding in U-shape -By turning