stahl 78 used for sale

Bending tool, die, lower knife, lower tool, lower jaw -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg

Size: 520 mm Equipments: 4 buckle plates 1 Knife Flat pile feeder

Round stack feeder 4 pockets 2xSword 1xSide pocket Press delivery

A used folding machine Steel KD 66 4 KTL Round stack feeder 4 bag 2xsword 1xSide pocket Press delivery

Bending tool, die, upper knife, upper tool, deer foot tool -Tool: for press brake -Tool radius: mm -Dimensions: 30 x 169 mm -Length: 2500 mm -Weight: 89 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake -Tool radius: mm -Dimensions: 14 x 94 mm -Length: 2500 mm -Weight: 20 kg

Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, Flat Pile feeder 4 buckles 1 knife delivery

Bending tool, die, upper knife, upper tool, straight tool -Handover in the current condition as seen -partially damaged -Tool: for press brake -Dimensions: 35 x 154 mm -Length: 2653mm -Weight: 79.5kg

Bending tool, die, bottom knife, bottom tool, prism tool, beading tool -Tool: for press brake -Prism width: 16 mm -Tool: shared -Tool: is guided -Tool intermediate dimensions: 1430 mm -Transport dimensions: 1550/200/H235 mm -Weight: 250kg

Cleaning container, safety container, cleaning container -Material: sheet steel -Container: Ø 295 x 235 mm -Strainer basket: Ø 265 x 100 mm -Number: 3x devices available -Price: per piece -Dimensions: 310/370/H740 mm -Weight: 8 kg

Clamping plate, welding table, welding table, straightening plate -Width: 1000 mm -Length: 1295 mm -Height: 910 mm -Plate thickness: 28 mm -Wall thickness underframe: 5 mm -Transport dimensions: 1450/1000/H1100 mm -Weight: 570 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outside: Ø 305 mm -Short taper: 8 -Number: 1x discs available -Price: per piece -Weight: 15.3 kg

Heidelberg Stahlfolder Ti 52 4/4-f152.1 Folding Machine This folding machine is in excellent technical and visual condition and is fully operational. Technical Details: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High-capacity stack feeding Four cassettes on the first module (Ti-52) Four cassettes on the second module (Ti-52) Inverter-controlled, precise folding adjustments Noise reduction Double sheet detection sensor Electronic batching counter Electric-powered delivery with adjustable speed settings Comes with spare parts and tools for maintenance This machine is ready for immediate use form our warehouse in 67269 Gruenstadt, Germany

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 230 mm -Short taper: 102 mm -Number: 3x discs available -Price: per piece -Weight: 9.7 kg

Folding Machine Steel T 36 Year of manufacture: 1985 Flat Pile Feeder Folding Type: 4 buckles - 4 buckles Size: min. 80 x 100 mm - max. 360 x 650 mm Paper weight: 40 - 250 g/m² Pile height: max. 580 mm Speed: min. 10 m/min. - max. 160 m/min. Diameter of folding rollers: 32 mm Delivery: Stream delivery Compressor included immediately available from our warehouse in Germany

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 207 mm -Short taper: 6 -Number: 1x discs available -Price: per piece -Weight: 6.8 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Feed flange: for drive heart, three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 218 mm -Short cones: 6 -Bolt circle: Ø 155 mm -Bolt spacing: 110 mm -Quantity: 1x disc available -Weight: 9.2 kg

Clamping plate, welding table, welding table, straightening plate, workbench, work table -Diameter: 700 mm -Height: 810 mm adjustable -Sheet thickness: 19 mm -Number: 1 table available -Price: per piece -Weight: 88 kg/piece

Threaded rod, threaded bolt, threaded rods according to DIN 975 -Diameter: M24 -Threaded rod: galvanized -Quality: 4.8 -185 pieces, length: 2000 mm, price per piece: 15 EUR net -19 pieces, length: 3000 mm, price per piece: 20 EUR net

Overhead Crane Indoor Crane Overhead Crane Steel Crane 1 t / 20.4 m STEEL EL-A10-20,410 E Year of construction :1999 Load capacity: 1000 kg Lifting height (max. hook travel): 6 m Gauge center (span) : 20,410 m Crane weight complete : approx. 3 t Degree of protection: IP54 Connected voltage: 400 V Control voltage :230 V Works perfectly, carefully removed and packaged, maintained in good condition, regular maintenance and inspection Documents available such as test book, data sheet, technical documentation, circuit diagrams, operation and maintenance instructions Prices: 7,500.00 Euro net + 1,425.00 ( 19 % VAT) = 8,925.00 Euro gross All prices are net including loaded onto trucks VAT reclaimable Shipping possible. Several cranes available in different span and lifting capacity

Torque wrench, torque tool -Recording: 1/2 inch -Torque: 4-13 mkp -Dimensions: 630/110/H40 mm -Weight: 1.2 kg

FOLDER STAHL T 56/4FB2 -Year 1987 -High pile feeder -Four buckles Min./max. size 150x210 mms / 560x840 mms -Air pump, Delivery -All rollers in nice conditions -Available immediately

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 565 x 310 mm -Connection: Ø 500 mm -Material: sheet steel -Dimensions: 870/650/H650 mm -Weight: 38 kg

Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 515 mm -Material: Steel sheet -Number: 2x angles available -Price: per piece -Dimensions: 900/600/H610 mm -Weight: 22 kg

Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 560 mm -Material: Steel sheet -Dimensions: 1600/660/H800 mm -Weight: 38 kg

Manufacturer: Épgép STAHL Wingspan: 16.3 m Lifting height: 10 m Lifting capacity: 12.5 t Overall length: 16,300 mm Modernized, wired remote control, new 12.5 t carriage

plate width: 1500 mm plate depth: 4200 mm plate height: 350 mm total power requirement: kW weight of the machine ca.: 5 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping angle, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Material: Steel -Dimensions: 245/202/H130 mm -Wall thickness: mm -Weight: 28 kg

Height indicator, parallel indicator -Max. Working height: 300 mm -Hard metal needle -Dimensions: 175/60/H385 mm -Weight: 1.7 kg

Height indicator, parallel indicator -Max. Working height: 500 mm -Hard metal needle -Dimensions: 230/80/H650 mm -Weight: 3.4 kg

Flatpile With Tremathead, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, 3rd Stations: 2 Pockets, Delivery

Pallet Feeder with Tremat Head, 1st Sation: 4 Pockets, 2nd Station: 4 Pockets, Mobile Knife, Delivery

Serial No. FH. FANB-000076, Flatpile Feeder With Tremathead And DCT Control, 4 Pockets, Delivery, Equipped With Heidelberg Gluing Unit, Format: Max. 40x84cm, Min. 10x15cm

Height indicator, parallel indicator -Max. Working height: 500 mm -Hard metal needle -Dimensions: 615/120/H75 mm -Weight: 2.7 kg

T-slot plate, clamping plate with T-slots, plate field, welding table, welding table, intermediate plate for hydraulic press, eccentric press, milling machine -Dimensions: 930/700/H90 mm -Plate: massive -Bore in the middle: Ø 100 mm -Weight: 450 kg

Serial No. FH. FAPF-001439, Flatpile Feeder, 4 Pockets, Delivery

Flatpile Feeder with Tremat Head, 4 Pockets, SAK 56 S2 Delivery

Flatepile Feeder, 4 Pockets, Delivery

Tool changer for lathe, upper support, upper slide, dovetail guide -with four tool holders -Dimension: see photos -Dimensions: 400/260/H200 mm -Weight: 25.2 kg

Width 52 cm Built in 1990 Flat pile feeder TREMAT 1st station: 4 fold pockets 52 cm Gluing device HHS for cold glue Downstream knife shaft 2nd station: 4 fold pockets 52 cm Downstream knife shaft flexible sword folding unit EF 43 Shed display SAK Delivery date: immediately Price on request. Worldwide delivery & installation.

Flat pile feeder 6 fold pockets Hook-in cross fold Soundproofing enclosure mobile shed display SAK 56

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Flange: Ø 210 mm -Hole circle: Ø 230 mm -Through hole: Ø mm -Weight: 19 kg

Forklift battery charger, industrial charger, forklift battery charger, industrial charger -24 volts -Power: 4 A -Connection: 230 volts -Weight: 8 kg

1 fold pocket with manually adjustable stops 3 fold pockets with motorized adjustable stops

Central lubrication, oil circulation system -Contents: approx. 3 liters -powered: electric -Dimensions: 290/250/H125 mm -Weight: 5.7 kg

T-slot plate, clamping plate with T slots, plate field, welding table, welding table -Intermediate plate for: hydraulic press, eccentric press, milling machine -Dimensions: 1100/650/H100 mm -Plate: solid -Bore: 8x -T-slot: 28 mm -Weight: 536 kg

Chuck flange, flange mount, lathe chuck flange, driver flange -Chuck flange: for three-jaw chuck, four-jaw chuck, face plate -External: O 270 x 110 mm -Inside: O 240 x 81 mm -Mount: Camlock short taper 8 (139 mm) -Bolt circle: O 171 mm -Number: 1x disks available -Price per piece -Weight: 16.6 kg

Folding unit with 3 pockets + blind pocket Flat pile feeder FI-40 mobile shed display Soundproofing enclosure Compressor

Two walk-in climate chambers including Wolf burner are available. Heating capacity: 105kW, heating medium: oil/gas, max. oil throughput: 14.9kg/h, air volume flow: 2.78m³/h, max. external delivery pressure: 400Pa, control: PLC. Documentation available. An on-site inspection is possible.

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 235 mm -Cone: 106 mm -Hole circle: Ø 135 mm -Number: 2x discs available -Price: complete -Weight: 14 kg