sta used for sale

Offer 26268 Technical data: - Load capacity approx. 1000 kg - Lifting height up to approx. . 1640 mm - Fork length approx. 1180 mm - Space requirement with forks approx. W 800 x L 1800 mm - Construction height approx. 1970 mm - Weight approx. 400 kg

In flight-case • Black foot • 2 columns, 1 section • Double spacer (for better stability) • Load capacity: 30.00 kg • Minimum height: 1.30 m / maximum: 2.10 m • Wingspan: 1.15 m • Weight: 7.20 kg Auction-ID: A1-50934-37

Shadow Neutron 2-foot bundle • Black foot • Load capacity: 30.00 kg • Minimum height: 1.24 m / maximum: 2.50 m • Wingspan: 1.34 m • Weight: 7.74 kg Auction-ID: A1-50934-4

Set of 4 new PWB1C-B in original cardboard Auction-ID: A1-50934-14

Set of 4 new PWB1C-B in original cardboard Auction-ID: A1-50934-15

Set of 4 new PWB1C-B in original cardboard Auction-ID: A1-50934-72

Manual hand unit: Ja J/N Automatic for single pieces: , J/N Automatic for frames: , J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stamping crucible throttled, work surface 72 x 102 cm, 1 frame, various operating modes, single cycle, continuous operation, programmable with timer, safety mats

USED WIRTH & GRUFFAT C128 TRANSFER MACHINE Serial No.: 1230 Year: 1995 Equipped with 1 SIEMENS PLC 1 Plate / 8 clamping stations W20 7 Pumping units - horizontal and cross drilling Dimensions and weight 1600x1500xH2400mm - weight 950 kg Auction-ID: A1-50950-81

USED WIRTH & GRUFFAT C212 TRANSFER MACHINE Year: 1990 Equipped with 1 10-station tray with clamp clamping 9 Units 1 External lubrication tank with paper filter 1 SIEMENS PLC Dimensions and weight 2800x2300xH2400mm - weight2500kg + 1 pallet 2400x1200xH500mm - weight 300kg + loader 2000x1000xH2000mm - weight 800kg + conveyor 3000x1600xH1400mm - weight 400 kg Auction-ID: A1-50950-82

Stock number: D1231, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Column lifter, Standing: On foot console, Motor: 0.75 kW - 380 Volt, Dimensions: L 1150 x W 1100 x H 3000 mm, Other: With chain drive - Fork grip for Vemag waggon - Max 300 kg

Stock number: D1246, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Column lifter, Standing: On foot console, Motor: 0.75 kW - 380 Volt, Dimensions: L 1050 x W 1100 x H 3000 mm, Lifting height: Max 2500 mm, Other: With chain drive - Excl. fork grip - Max 300 kg

General SKUCY002 LocationBarneveld CEcheck MakeFlottweg Main Features MaterialStainless steel Capacity1500 Ltr./Hr. Motor7.5 KW Specified Features - Decanter Decantercheck 2-Phase decantercheck Screw diameter250 mm Screw length750 mm Inlet25 mm Liquid outlet15 mm Solids outlet120 x 300 mm Motor7.5 kW (460 V, 60 Hz) Max. rotor speed6000 rpm MaterialStainless steel 1.4462 (318LN) General TypeZ23-3/401 No.002.100.07 Year of construction2002 With switchcheck With switchgear( as is) Floor space1,4 m x 1,5 m Total height1,9 m Weight900 kgStarchGreen FridayBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersPaper & otherOrganicsE-waste & metalDecantersAnimal feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteFlottwegIndustries > Food & Feed > StarchGreen FridayIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndu ...

ROLLER COATER with SINGLE SPREADING-COATING ROLLER - Max working width mm 1300 - Lenght of the machine mm 1000 approx - Thickness of the panels (working height): mm 0 - 100 - Adjustable feeding speed: m/min 4 - 23 - Separate (from the machine s body) electric and command cabinet - Total installed power KW 2.4 - Equipped with: - 1°) Dosing unit (Chromium plated Doctor roller diam. mm 174), KW 0.37 - 2°) Coating unit (Rubbered spreading roller diam. mm 248) KW 0.75, with a rubbered bottom roller, counter-placed to the top one

Robot Maximum reach: 3195mm Rated payload: 180kg Maximum payload: 230kg Maximum supplementary load, rotating column / link arm / arm: 300kg / 130kg / 150kg Pose repeatability (ISO 9283): +-0,07mm Number of axes: 5 Mounting position: Floor Footprint: 754mm x 754mm Weight: 1017kg Protection rating (IEC 60529): IP65 Running hours: 5054h Vacuumsystem Dimensions: 1700mm x 900mm 350mm Construction of 56 SCHMALZ cups dia 50 and 70mm with pushrod for loosen plate FESTO components for compressed air/vacuum Each cup separately controlled by FESTO controller Communication via Profibus

General Description High-speed mechanical stamping press manufactured by JELŠINGRAD under licence from Hermann Raster KG, Germany, model BPA-75 . Heavy-duty press designed for high-volume progressive-die stamping, punching and blanking from coil. Technical Details Manufacturer: JELŠINGRAD Model: BPA-75 Year: 1985 Serial number: 8510917 Nominal pressing force: 750 kN / 75 t Stroke rate: Infinitely variable 120–600 strokes/min Ram stroke: 10 / 50 mm Working hrs: aprox. 13000 Ram adjustment: 80 mm Maximum daylight: 400 mm Table: 1,250 × 750 mm Distance between uprights: 730 × 620 mm Maximum strip width: 300 mm Strip feed height: 100–130 mm Feed length per stroke: 5–15 mm Motor power: 15 kW Power supply: 3 × 380 V, 50 Hz Air clutch and brake Compatible with pneumatic strip feeding equipment, which is installed on machine Electrical cabinet and controls inc ...

Technical data & equipmentManufacturer: BORRIES Markier-Systeme GmbH Intended use: Legally required, permanent marking of hydraulic sockets, press fittings and metallic round parts (e.g. marking of standards, batch numbers, manufacturer's marks or hose types). Drive & control: Electromotive drive with built-in control cabinet. Operating modes: Manual / set-up mode / automatic mode (selectable by key switch). Safety: Integrated two-hand safety control (start button at the front) and main switch with emergency stop function. Tool holder & mechanics: Adjustable type wheel / embossing head for holding number, letter and symbol stamps. Manual height adjustment / height adjustment via handwheel for different valve diameters. Mechanical prism holder / bracket for cylindrical components and hydraulic sockets. Incl. accessories

Year of construction 2000 Mobile stacking delivery for marking-free laying Banding display with max. 3 panels Computer control with digital display Bundling with paper or plastic tape Mobile substructure Delivery date: immediately

Used Wentworth Labs 0-020-0101 Probe Card Test and Repair Station With Microscope Unitron ZSB Auction-ID: A1-50936-122

Batch of various stainless steel and aluminum plates and tubes Including frame and pallet Total weight: 455kg Auction-ID: A1-50936-173

2x Used scanion 304200 NO-STATIC 200 ionizing units Auction-ID: A1-50936-268

New in original carton 208-690 V / 22 A. ➜ New in original carton Auction-ID: A1-51157-25

5x adjustable stainless steel vacuum boilers Volume diameter: 25cm Inlet diameter: 5cm Auction-ID: A1-50936-7

Batch of high-quality stainless steel pressure hoses with ball valve Auction-ID: A1-50936-54

2 Watson Marlow peristaltic pumps (314D head, 4 rollers, 1.6 mm tubing) Drivers Servex FDH620PD3 brushless DC motor Auction-ID: A1-51157-2

Batch of 35x used flexible stainless steel hose with insulation cover Maximum length: 100cm Description on coupling piece: DN40 1.4301 NPT 1 1/2\" No. 13A051304 Auction-ID: A1-50936-73

2x In original box monitor arm set for 4 monitors, from Startech Auction-ID: A1-50936-32

Lot of 30x Dockweiler stainless steel vacuum connections. Stainless steel 316 material Auction-ID: A1-50936-260

New in original carton 208-690 V / 170 A. ➜ New in original carton Auction-ID: A1-51157-26

New in original carton 208-690 V / 17 A Altivar Soft Starter. ➜ New in original carton Auction-ID: A1-51157-24

Batch of ceramic and stainless steel mixing pots Auction-ID: A1-50936-126

Used Wewo electric mobile cart with station – Moving system Model: 161-00000004-00 Batteries are empty and need to be replaced. Power: 220 volts. Manufactured: 2007 Auction-ID: A1-50936-168

New in original carton 208-690 V / 170 A. - 2nd copy Auction-ID: A1-51157-27

150 hL – 304 stainless steel flat bottom tank with casing This 150 hL 304 stainless steel storage tank is designed for winemaking and liquid storage applications in the cellar. Its simple and robust design, combined with a roof with a chimney centred, a rectangular door with external opening, a flat bottom with a boilard and suitable racking equipment, makes it a reliable and immediately usable solution to complement an existing winery capacity. Technical characteristics Material: 304 stainless steel Total capacity: 15,000 litres Roof 2 lifting rings 1 chimney centred with hatch Ferrule 1 ladder support bar 1 door rung 1 rectangular door with external opening 1 taster tap Flat bottom with boilard 1 stainless steel total drain valve on square flange 1 sludge without cap Dimensions Diameter: 2800 mm Height: 4000 mm Location: Civray Equipment sold loaded on truck: additiona ...

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

Donaldson P-EG 0768 – Stainless steel filter DN 150 for compressed air Technical data Type: P-EG 0768 Max. working pressure: 10 bar Test pressure: 18.3 bar Material: stainless steel 304 (1.4301) Operating temperature (gas, air): -25/+150 °C Volume: 77 litres Acc. classification to 2014/68/EU for fluids group 2 Flange connection: DN150 The P-EG filter housings have been developed for the purification of compressed air, technical gases and steam Dimensions & weight Height: 1410 mm Width: 480 mm Weight: 70 kg Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-281

258 hL – Cartier – 304 stainless steel tank closed self-emptying on sloping bottom skirt This 304 stainless steel storage tank with a capacity of 258 hl is designed for the storage of liquids in the wine and agri-food environment. Its cylindrical configuration closed on a self-emptying skirt, combined with a sloping bottom, makes it a simple, robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical data Cylindrical on self-emptying skirt Capacity: 25,800 litres Material: stainless steel Tank number: 11, 12 and 13 Closed roof with chimney and hatch Ø 550 mm 2 lifting rings Ferrule 1 taster valve 1 rectangular door 430×540 mm at the bottom of the ferrule 1 partial drain valve DIN 50 with plug 1 winding tube Bottom Sloped bottom on skirt 1 total drain valve DIN 50 4 feet under the skirt Dimensions Diameter: 3000 mm Tot ...

Donaldson P-EG 0768 – Stainless steel filter DN 150 for compressed air Technical data Type: P-EG 0768 Max. working pressure: 10 bar Test pressure: 18.3 bar Material: stainless steel 304 (1.4301) Operating temperature (gas, air): -25/+150 °C Volume: 77 litres Acc. classification to 2014/68/EU for fluids group 2 Flange connection: DN150 The P-EG filter housings have been developed for the purification of compressed air, technical gases and steam Dimensions & weight Height: 1410 mm Width: 480 mm Weight: 70 kg Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-282

107 hL – Lejeune – 304 stainless steel tank on legs This LEJEUNE stainless steel storage tank with a capacity of 107 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical cylindrical configuration on legs, combined with a conical bottom and simple racking equipment, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Vertical cylindrical tank Brand: LEJEUNE Total capacity: 10,700 litres Material: stainless steel Roof 2 lifting rings Chimney Chimney Shell 1 ladder support bar 1 taster tap 1 rectangular door 1 partial drain valve on square flange Bottom Conical 1 total drain valve on square flange 4 feet stainless steel with lifting eye Dimensions Diameter: 2200 mm Height: 4200 mm Location: Civray Equipment sold loaded on truck: additional mandato ...

107 hL – Lejeune – 304 stainless steel tank on legs This LEJEUNE stainless steel storage tank with a capacity of 107 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical cylindrical configuration on legs, combined with a conical bottom and simple racking equipment, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Vertical cylindrical tank Brand: LEJEUNE Total capacity: 10,700 litres Material: stainless steel Roof 2 lifting rings Chimney Chimney Shell 1 ladder support bar 1 taster tap 1 rectangular door 1 partial drain valve on square flange Bottom Conical 1 total drain valve on square flange 4 feet stainless steel with lifting eye Dimensions Diameter: 2200 mm Height: 4200 mm Location: Civray Equipment sold loaded on truck: additional mandato ...

289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirt This 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 28,900 litres Material: stainless steel 304 Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18 Roof Central chimney height 500 mm Ferrule Door 600×800 with mud flap 850 mm from the ground with winch system Valve in 70 2 Valves in 50 Winding pipes in 70 and 50 12 regulation rings 1 taster 1 dial thermometer Bottom Sloping bottom ...

127 hL – 1976 Snel-Inox – Vertical cylindrical stainless steel tank closed on legs Technical data Vertical cylindrical tank on closed legs Brand: SNEL-INOX Capacity: 127 HL Material: stainless steel Year: 1976 Conical roof Centered hatch DN 500 mm Lifting rings Ferrule Oval door at the bottom of the ferrule Partial drain on square flange 80×80 mm with butterfly valve DN 40 MÂCON Conical bottom Total drain on square flange 80×80 mm without outlet valve DN 40 MÂCON 3 feet H. 400 mm Dimensions Diameter: 2300 mm Ferrule height: 3000 mm Total height: 3850 mm Location: Monteux (84) Equipment sold loaded on truck: mandatory additional dismantling and loading fees apply to this lot. Auction-ID: A1-51122-267

302 hL – Alfa Laval – 316L temperature-controlled stainless steel tank with sloping flat bottom 2% ALFA LAVAL stainless steel tank in 316L of 302 hL, temperature-regulated, designed for storage in demanding environments. Its design with a flat bottom inclined 2% facilitates emptying and work in the cellar, while offering a large storage capacity. Technical characteristics Flat bottom tank inclined 2% Brand: ALFA LAVAL Total capacity: 30,200 litres Material: stainless steel 316 L Interior finish: Cold rolled raw Exterior finish: Cold rolled raw Thermoregulated Conical roof 1 eccentric chimney at the front Ø 200 mm 2 Stainless steel flags 1 thermometer 6 lifting rings Ferrule 1 oval door 310×420 mm 1 partial drain valve DN 65 1 tap for level probe Flat bottom inclined 2% with housing 1 total drain valve with plug Dimensions Diameter: 2800 mm Total height: 6000 mm Ferrule ...

Stainless steel screw drip – 150 mm / 2,670 mm screw drip used stainless steel screw drip, designed to facilitate devatting and evacuation of the pomace / harvest after fermentation. Compact and easy to integrate into a reception or work area in the cellar, it allows for regular mechanical transfer. Technical characteristics Type: duner / screw extractor Construction: stainless steel screw Function: extraction and conveying of the pomace / harvest to an outlet (press, skip, pump, conveyor, etc.) Receiving tank: optimised inner section to guide the material towards the auger Dimensions Length of the screw: 2,670 mm Inner width of the bin: 195 mm Depth of the bin: 225 mm Total footprint Total length: 3,300 mm Total width: 330 mm Total height: 470 mm Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-363

10 hL – 304 stainless steel tank flat bottom This vertical cylindrical stainless steel tank with a capacity of 10 hL is designed for the storage of liquids in wine, brewing and cider environments. Its configuration, combined with a flat bottom, a closed flat roof and simple emptying equipment, makes it a robust and immediately usable second-hand solution to complement a small existing storage capacity. Technical characteristics Material: stainless steel Total capacity: 1,000 litres Closed vertical cylindrical tank with flat bottom Roof 1 round hatch diameter 200 mm Shell 1 drain valve at the bottom of the tank Connection not GAS 1\"1/4 Flat bottom Dimensions Diameter: 960 mm Height: 1600 mm Dimensions Diameter: 960 mm Height: 1600 mm Location: Monteux (84) Equipment sold loaded on truck: dismantling and loading offered by the seller. Auction-ID: A1-51122-243

107 hL – Lejeune – 304 stainless steel tank on legs This LEJEUNE stainless steel storage tank with a capacity of 107 hl is designed for the storage of liquids in the wine and agri-food environment. Its vertical cylindrical configuration on legs, combined with a conical bottom and simple racking equipment, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Vertical cylindrical tank Brand: LEJEUNE Total capacity: 10,700 litres Material: stainless steel Roof 2 lifting rings Chimney Chimney Shell 1 ladder support bar 1 taster tap 1 rectangular door 1 partial drain valve on square flange Bottom Conical 1 total drain valve on square flange 4 feet stainless steel with lifting eye Dimensions Diameter: 2200 mm Height: 4200 mm Location: Civray Equipment sold loaded on truck: additional mandato ...

150 hL – 2008 Mangeard – 304 self-emptying stainless steel tank with 30% sloped bottom (maceration and draining) This MANGEARD self-emptying stainless steel tank with a capacity of 150 hL is designed for storage, maceration and draining wine applications. Its configuration, combined with a sloping skirt bottom with reinforcements, a 30% slope, a pneumatic extra-guillotine door and simple racking equipment, makes it a robust and immediately usable second-hand solution to complete a winery or strengthen a winemaking process. Technical characteristics Brand: MANGEARD Material: 304L stainless steel Total capacity: 15,000 litres Year: 2008 Conditions of use: atmospheric pressure Roof 1 chimney with stainless steel hatch with spikes DN 500 mm 1 neck Bellot stainless steel Lifting rings Ferrule 1 extra-guillotine door frame 600 x 600 mm, useful passage, with pneumatic cylinder syste ...

289 hL – Vautier – Vertical temperature-controlled 304 stainless steel tank with 22% sloping bottom on skirt This 289 hl capacity VAUTIER temperature-controlled storage tank in 304 stainless steel is designed for the storage of liquids in the wine and food industry. Its vertical configuration on a skirt, combined with a 22% inclined bottom and its regulation rings, makes it a robust and immediately usable solution to complete a winery or increase an existing storage capacity. Technical characteristics Brand: VAUTIER Tank with sloping bottom on skirt Capacity: 28,900 litres Material: stainless steel 304 Tanks N°: 6; 7; 8; 9; 15; 16; 17 and 18 Roof Central chimney height 500 mm Ferrule Door 600×800 with mud flap 850 mm from the ground with winch system Valve in 70 2 Valves in 50 Winding pipes in 70 and 50 12 regulation rings 1 taster 1 dial thermometer Bottom Sloping bottom ...

396 hL (285 + 111 hL) – Tec Inox – 304 stainless steel tank compartmentalized flat bottom 2% on a slab Vertical storage tank in TEC INOX stainless steel of 396 hL, divided into 2 independent compartments (285 hL and 111 hL). Previously used for wine storage, it allows several separate batches to be managed within the same tank. Technical data Brand: TEC INOX Total capacity: 396 hL (285 + 111 hL) Construction: 304 food-grade stainless steel Type: compartmentalized vertical storage tank Flat bottom with 2% slopeLayout : on concrete raft Previous use: wine Equipment per compartment 1 oval door stainless steel autoclave 310 × 420 mm 1 level indicator1 total emptying 1 partial emptying 1 stainless steel chimney Ø 200 mm Dimensions Total height: 6,000 mm Location: Bollène (84) Equipment sold loaded on truck: additional mandatory dismantling and loading fees apply to this lot. ...

48.8 hL – NEW – Temperature-controlled 304 stainless steel tank, sloping flat bottom, floating cap New material. Technical characteristics Model: SPAIPSER5000 Material: 304 stainless steel Total capacity: 4,880 litres Bottom: sloping flat, slope 4% Roof: floating cap Interior finish: bright annealing Exterior finish: brushed Roof 2 vacuum lifting rings 1 floating cap 316L stainless steel with complete pneumatic system Valve. Ferrule 1 jib crane 1 lifting winch 1 ladder support 1 rectangular door 420×530 mm at the bottom of the ferrule with external opening 1 partial drain with square flange 100×100, stainless steel ball valve 40 MÂCON, stainless steel stopper 1 tasting tap on DIN 15 tap 1 needle thermometer 1 complete stainless steel level with tap and stainless steel ruler (polycarbonate tube) 4 coil towers with 2.15 m² exchange surface on the ferrule 2 coil towers wit ...