sta used for sale

Slaan: - 29 x 15 mm - 34 x 12 mm - 20 x 20 mm - 57 x 8 mm Scheren: - 230 x 20 mm - 375 x 10 mm Hoeksnijden: - 90°: 130 x 13 mm - 45°: 75 x 10 mm Doorsnede snijden: - rond: 45 mm - vierkant: 45 mm - C amp; I profiel: 127 mm Inkepingen: - rechthoekig: 45 x 100 mm Punching pressure: 60 ton Max sheet thickness by punching + nibbling: dia 29 x 15 / dia 57 x 8 mm Max punching dia: dia 160 mm Power needed: 5,5 kW Length: 1640 mm Depth: 710 mm Height: 1780 mm Weight: 1570 kg

Huber Rotamat RO9 as fine screen version and with EX-protection, spray nozzles and press zone flushing. The intended use of the RO9 is the separation of solids from wastewater, compaction and washing of the screenings. Application:- Wastewater treatment plants (municipal and industrial)

Step screen for separating dirt and suspended solids from wastewater. The screenings are transported step by step to the outlet by a moving set of lamellae. Suspended solids that are smaller than the gap dimensions are also transported through the screenings carpet. The screen was overhauled in 06.2023.

Dosing station / pumping station for dosing dangerous liquid chemicals. The cabinet is completely closed with cabinet exhaust air, supply air filter, compressed air unit and compressed air diaphragm pumps. With the dosing station, the chemical was pumped from the fixed tank or IBC into the distribution network. The system is of very high quality and can be used for many chemicals. 2x compressed air diaphragm pumps Almatec Futur 50T / 1x Almatec E10TTT, valves, sampling box, flow regulator with pressure sensor, flushing with a spray gun, compressed air unit, switch cabinet with control panel (touch screen) and interface.

The cabinet (Hydrochloric acid tank modul) is completely closed with cabinet exhaust air, supply air filter, compressed air unit as well as a chemical centrifugal pump and compressed air diaphragm pump. With the unloading module, the delivered chemical was conveyed through the filter into a storage tank. The system is of very high quality and can be used for many chemicals. 1x centrifugal pump (manufactured by Richter type MNK-B / F-P 50-32-125) / 1x Almatec Futur 50T, 1x Almatec A10TTT, valve and filter units, sampling box, flow regulator with pressure sensor, flushing with a spray gun, compressed air unit and electrical cabinet

Ex-proofed solvent preparation station made of stainless steel. The station consists of: -> 3 pcs. compressed air driven diaphragm pumps -> stainless steel solvent tank -> drip pan made by Denios -> ex-proofed agitator and stainless steel reactor -> stainless steel piping

Step screen for separating dirt and suspended solids from wastewater. The screenings are transported step by step to the outlet by a moving set of lamellae. Suspended solids that are smaller than the gap dimensions are also transported through the screenings carpet. The screen was overhauled in 06.2023.

The 6-station cleaning machine was part of a lens processing process. As an intermediate process, it took over the necessary cleaning of the transport containers, The cleaning process was carried out fully automatically from the loading station to the removal station. This function (station 1 and 6) can no longer be operated, because the systems conveyor belt is no longer available. - Station 2: post-cleaning with ultrasound in heated cleaning liquid. - Station 3: Rinsing with heated rinsing liquid, blowing off the residual liquid. - Station 4: pre-drying with heated air. - Station 5: Post-drying with heated air. - Control: Siemens SPS S7-200

Huber Rotamat RO2 as fine screen version and with EX-protection, spray nozzles and automatic press zone flushing. The intended use of the RO1 is the separation of solids from wastewater, compaction and washing of the screenings. Range of application:- Wastewater treatment plants (municipal and industrial) The machine had its last application in a municipal wastewater treatment plant.

Key data: 1608 KW, 2200 kVA, 400 V

We offer for sale a CHP MWM Type: TCG 2020 V16. Technical data Engine: MWM Type TCG 2020 V16 Power: 1608 kW Year of manufacture: 2018 Operating hours: 15,951 h Generator: Marelli Type: MJB 5072K33380 Power: 2200 KVA Voltage: 400 V Frequency: 50 Hz Year of Make: 2017 Operating hours: 15,951 h Scope of delivery: engine + generator on base frame, TEM control, gas section, pumps, heat exchanger and complete documents.

Souffleuse éléctrique PLASTIBLOW type PB1E/D E60/25 Année : 2007 Diamètre vis extrudeuse : 60mm Rapport L/D vis : 25 Moules : 2 Course : 260 mm Force de fermeture : 35 T Capacité : 3L Puissance moteur extrudeuse : 30 KW Puissance chauffage extrudeuse : 9,6 KW Zones de chauffes : 4 Ventilateurs de refroidissement : 3 Capacité de plastification en PE : 58kg/h Capacité de plastification en BFPE : 75kg/h Heures de fonctionnement : 24 000 heures Double poste Double tete avec entraxe de 100mm. Tête modifiée par rapport à original en 2021 (3 têtes entraxe 85mm => 2 têtes entraxe 100)

Souffleuse électrique PLASTIBLOW PB1E/S E42/24 simple poste Année : 2008 Diamètre vis extrudeuse : 42mm Rapport L/D vis : 24 Capacité : 1L Puissance du moteur de l'extrudeuse : 22KW Puissance de chauffage de l'extrudeuse : 4,1KW Zones de chauffage : 3 Ventilateurs de refroidissement extrudeuse : 2 Capacité de plastification avec du PE : 24kg/h Capacité de plastification avec du BFPE : 26kg/h Heures de fonctionnement : 8 000h Double tète entraxe 100mm (2 x 500ml)

2 x Duplo 10/60 air suction feed collators: with 2.5 mio. cycles and with 1.2 mio cycles. LUR connecting unit for the stacker. Stacker: DBM-400 STR with 1.2 mio. cycles connecting bridge between the 2 vertical towers. Manuals, serial communication cable, E-cable In production ready condition, clean and tested. Available immediately.

Sokratherm CHP compact module with MAN engine E2842 LE 322 Fuel: Natural gas Power el.: 336 kW Power th.: 458 Speed: 1500 1/min Frequency: 50 Hz Voltage: 400 V approx. 23000 operating hours after overhaul/replacement engine Subject to prior sale - errors possible! Internal reference number: E-1225-02

MAN E0836 LE202 Fuel: sewage gas Power el.: 104 kW Power th.: 125 kW 400 V, 50 Hz Stamford Generator with 125 kVA Subject to prior sale - errors possible! Internal reference number: E-1225-05

Standing shelf HOPPER Technical data: Material: Stainless Steel Total dimensions: W1000 x D50 cm Scope of delivery: 14 stands, 45 shelves, various struts Bay load max.: 1200 kg solid, welded design U-shaped, L-shaped straight line also possible! no cheap imported goods, Made in Germany! Equipment is in stock, available immediately! Condition see original pictures.

Format : 73 x 104 cm (29”x 41”) Spiess feeder with pre-marge Front and side detection cells PC Control panel 3 x advances 2 x honeycombs straightened 2 x new honeycomb frames 2 x new heating units Air-conditioned electronic cabinet

Welded steel stand with four legs, cross braces and a mounted metal fixture with a vertical post and horizontal arm. Auction-ID: A1-50699-11

Technical data of the pallet rack stand: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Frame profile: M Profile size: P 90 x 75 x 1.80 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 4,000 mm Depth: 1,100 mm General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Platform scale up to 30 kg, reading in 10 g steps, This stainless steel platform scale weighs from 0.2 to 30 kg with a division of 0.01 kg. The weighing platform sits freely on the table, while the indicator is mounted on a stainless column at eye level. Useful for weighing portions, crates or ingredients., The indicator is an IT1000 with keys for tare, zero, totalising and printing. We did not find a rating plate with the make or year., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/stainless-steel-30-kg-scale-with-it1000 -indicator/, Type: Platform scale, Weighing range: 0.2 – 30 kg, Division: 0.01 kg, Indicator: IT1000 on stainless column (tare, zero, totalising, print), Construction: Stainless steel

Weighing station for the food industry, The Top Control scale is a professional weighing solution for applications within the food industry. It consists of a colour touchscreen indicator on a stainless steel frame with a weighing platform and product tray. Thanks to its robust construction and user-friendly operation, this machine is suitable for a variety of weighing and packaging processes., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/topcontrol/, Type: Weighing scale / weighing station, Indicator: Top Control colour touchscreen, Construction: Stainless steel frame with weighing platform and product tray

Labelling line with two print and apply stations, This VWS Nederland line has a conveyor with two labelling stations in a row. Each station has its own printer and label reel, so you can print and apply two different labels or keep running on two reels. Each station has its own display control., The control panel has start and stop buttons per station and an emergency stop. We did not find a rating plate with the year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vws-nederland-labelling-line-with-two-p rinters/, Type: Labelling line with two print and apply stations, Stations: 2, each with printer and label reel, Controls: Display per station, push-button panel with emergency stop, Construction: Stainless steel frame with conveyor

Asparagus peeling machine with eight stations, The Hepro Schäl-Automat HSM-180/SAP peels asparagus automatically. Spears are loaded and carried past the peeling heads, which remove the skin evenly. The machine has eight stations that can be switched on or off individually; peeled spears come out onto the side table., The rating plate shows it was built in 2008 by Hepro GmbH in Delbrück (Germany), supply 400 V, 50 Hz, 3 phase, 0.5 kW. The machine stands on castors., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/hepro-hsm-180-sap-asparagus-peeler/, Type: Asparagus peeler (Schäl-Automat), Stations: 8, each switchable, Power supply: 400 V, 50 Hz, 3 phase, 0.5 kW, Construction: Stainless steel, on castors

Stainless steel mixing tank for dressings and sauces, This mixing tank has an agitator from Parema Procestechniek (type PAR5L-25, built 2006) and was used as a dressing mixer. The tank has a hinged lid and a conical bottom with outlet, and stands on legs with castors., Agitator speed is set steplessly with the dial on the control cabinet, which houses a frequency inverter., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/parema-mixing-tank-with-agitator/, Type: Mixing tank with agitator, Speed: Stepless (frequency inverter), Tank: Hinged lid, conical bottom with outlet, Construction: Stainless steel, on legs with castors

Mixing kettle that tilts for emptying, This stainless steel kettle is used for mixing sauces, salads, fillings and similar products. The lid is locked pneumatically so nothing escapes during mixing. Once mixed, the kettle tilts in its frame so it can be emptied easily into a tub or onto a conveyor., It is operated from a separate control cabinet with buttons for mixing, tilting and an emergency stop. There is no legible rating plate, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/tilting-mixing-kettle/, Type: Tilting mixing kettle, Lid: Pneumatically locked, Discharge: By tilting the kettle, Controls: Separate control cabinet with push buttons and emergency stop, Construction: Stainless steel

Used Urschel cutting machine, built entirely in stainless steel, This Urschel cutting machine stands on castors and is built in stainless steel. Product travels from the hopper into the cutting section; whatever has been cut leaves the machine on the other side through the discharge chute. Drive is by electric motor and belts, and the controls sit in their own box on the machine., The type plate is missing, so the year of manufacture and the exact type are not known. Testing with your own product can be arranged., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/urschel-cutting-machine/, Type: Cutting machine, Infeed: Hopper, Drive: Electric motor with belt drive, Controls: Own control box on the machine, Construction: Stainless steel, on castors

Inclined conveyor for moving product within a food processing line, This conveyor has a stainless steel frame mounted on castors, making it easy to reposition on the work floor. The belt has raised, wave-shaped side skirts on both sides, which keep loose or irregular products on the belt while it runs at an incline. The drive and controls are housed in a compact box fitted to the side of the frame. The open frame design allows for straightforward cleaning, suiting the conveyor for use in a food processing environment., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/opvoerband/, Type: Incline conveyor, Belt: With raised wave-shaped side skirts and cleats, Controls: Compact control box on the frame, Construction: Stainless steel frame on castors, open design

Cabbage corer on a stainless steel stand, This cabbage corer removes the hard core from a cabbage. The cabbage goes into the opening at the top, the toothed coring head comes down pneumatically and turns the core out; the removed core drops out underneath., The machine is built entirely in stainless steel and stands on four legs with adjustable feet. The pneumatics sit in a box on the side. There is no type plate, so make and year are not known. Trying it with your own product can be arranged., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/pneumatic-cabbage-corer/, Type: Cabbage corer, Drive: Pneumatic, Controls: Pneumatic box with valves, Construction: Stainless steel, on legs with adjustable feet

Spin dryer for washed vegetables, This centrifuge spins washed lettuce, vegetables or herbs dry. The product goes into the removable blue basket, the lid closes and the machine spins the water out, which drains through the outlet at the side., Spin time is set with the timer switch on the base. There is no manufacturer rating plate, so the make and year of manufacture are unknown., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/vegetable-spin-dryer/, Type: Vegetable spin dryer (centrifuge), Basket: Removable plastic basket, Controls: Timer switch, Drain: Water outlet at the side, Construction: Stainless steel, hinged lid

Orange juicer with automatic fruit feed, This automatic juicer from Zummo takes the oranges from the basket on top, cuts them in half and squeezes them between two cups. The juice runs out through the tap into your jug or bottle, and the peels drop into the bins in the base cabinet. Suited to fresh juice in kitchens, hotels, canteens or small-scale production., The juicer sits on a stainless steel base cabinet on castors. We have not been able to confirm the exact model or the year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/zummo-automatic-orange-juicer/, Type: Automatic citrus juicer, Feed: Fruit basket on top, Controls: Display with on/stop/select buttons, Construction: On stainless steel cabinet with castors and peel bins

Convection oven and steamer in one, with stand, The Leventi Combimat DGT is a combi steamer that cooks with steam, hot air or a combination of both. That lets you prepare meat, fish, vegetables and bakery products in a single unit, from gentle steaming to crisp baking., The oven sits on a stainless stand with tray runners and a pull-out work shelf. We did not find a rating plate with the year or capacity., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/leventi-combimat-dgt-combi-steamer/, Type: Combi steamer, Cooking modes: Steam, hot air or combination, Controls: Digital panel with display, Construction: Stainless steel, on stand with tray runners and pull-out shelf

Stainless steel cooking kettle by Zanussi, This Zanussi cooking kettle is a jacketed kettle on legs, built entirely in stainless steel. The lid is hinged and has a handle with a catch. A draw-off tap at the front lets you empty the kettle without tilting it., The control panel has a thermostat knob, a second control knob and a gauge. The type plate is no longer legible, so capacity, year and connected load are not established; we are happy to check that for you., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/zanussi-cooking-kettle/, Type: Cooking kettle, jacketed, Lid: Hinged, with handle and catch, Draw-off: Tap at the front, Controls: Thermostat knob, control knob and gauge, Construction: Stainless steel, on legs

Offer 26268 Technical data: - Load capacity approx. 1000 kg - Lifting height up to approx. . 1640 mm - Fork length approx. 1180 mm - Space requirement with forks approx. W 800 x L 1800 mm - Construction height approx. 1970 mm - Weight approx. 400 kg

In flight-case • Black foot • 2 columns, 1 section • Double spacer (for better stability) • Load capacity: 30.00 kg • Minimum height: 1.30 m / maximum: 2.10 m • Wingspan: 1.15 m • Weight: 7.20 kg Auction-ID: A1-50934-37

Shadow Neutron 2-foot bundle • Black foot • Load capacity: 30.00 kg • Minimum height: 1.24 m / maximum: 2.50 m • Wingspan: 1.34 m • Weight: 7.74 kg Auction-ID: A1-50934-4

Set of 4 new PWB1C-B in original cardboard Auction-ID: A1-50934-14

Set of 4 new PWB1C-B in original cardboard Auction-ID: A1-50934-15

Set of 4 new PWB1C-B in original cardboard Auction-ID: A1-50934-72

Manual hand unit: Ja J/N Automatic for single pieces: , J/N Automatic for frames: , J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stamping crucible throttled, work surface 72 x 102 cm, 1 frame, various operating modes, single cycle, continuous operation, programmable with timer, safety mats

USED WIRTH & GRUFFAT C128 TRANSFER MACHINE Serial No.: 1230 Year: 1995 Equipped with 1 SIEMENS PLC 1 Plate / 8 clamping stations W20 7 Pumping units - horizontal and cross drilling Dimensions and weight 1600x1500xH2400mm - weight 950 kg Auction-ID: A1-50950-81

USED WIRTH & GRUFFAT C212 TRANSFER MACHINE Year: 1990 Equipped with 1 10-station tray with clamp clamping 9 Units 1 External lubrication tank with paper filter 1 SIEMENS PLC Dimensions and weight 2800x2300xH2400mm - weight2500kg + 1 pallet 2400x1200xH500mm - weight 300kg + loader 2000x1000xH2000mm - weight 800kg + conveyor 3000x1600xH1400mm - weight 400 kg Auction-ID: A1-50950-82

Stock number: D1231, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Column lifter, Standing: On foot console, Motor: 0.75 kW - 380 Volt, Dimensions: L 1150 x W 1100 x H 3000 mm, Other: With chain drive - Fork grip for Vemag waggon - Max 300 kg

Stock number: D1246, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Column lifter, Standing: On foot console, Motor: 0.75 kW - 380 Volt, Dimensions: L 1050 x W 1100 x H 3000 mm, Lifting height: Max 2500 mm, Other: With chain drive - Excl. fork grip - Max 300 kg

ROLLER COATER with SINGLE SPREADING-COATING ROLLER - Max working width mm 1300 - Lenght of the machine mm 1000 approx - Thickness of the panels (working height): mm 0 - 100 - Adjustable feeding speed: m/min 4 - 23 - Separate (from the machine s body) electric and command cabinet - Total installed power KW 2.4 - Equipped with: - 1°) Dosing unit (Chromium plated Doctor roller diam. mm 174), KW 0.37 - 2°) Coating unit (Rubbered spreading roller diam. mm 248) KW 0.75, with a rubbered bottom roller, counter-placed to the top one

Robot Maximum reach: 3195mm Rated payload: 180kg Maximum payload: 230kg Maximum supplementary load, rotating column / link arm / arm: 300kg / 130kg / 150kg Pose repeatability (ISO 9283): +-0,07mm Number of axes: 5 Mounting position: Floor Footprint: 754mm x 754mm Weight: 1017kg Protection rating (IEC 60529): IP65 Running hours: 5054h Vacuumsystem Dimensions: 1700mm x 900mm 350mm Construction of 56 SCHMALZ cups dia 50 and 70mm with pushrod for loosen plate FESTO components for compressed air/vacuum Each cup separately controlled by FESTO controller Communication via Profibus

General Description High-speed mechanical stamping press manufactured by JELŠINGRAD under licence from Hermann Raster KG, Germany, model BPA-75 . Heavy-duty press designed for high-volume progressive-die stamping, punching and blanking from coil. Technical Details Manufacturer: JELŠINGRAD Model: BPA-75 Year: 1985 Serial number: 8510917 Nominal pressing force: 750 kN / 75 t Stroke rate: Infinitely variable 120–600 strokes/min Ram stroke: 10 / 50 mm Working hrs: aprox. 13000 Ram adjustment: 80 mm Maximum daylight: 400 mm Table: 1,250 × 750 mm Distance between uprights: 730 × 620 mm Maximum strip width: 300 mm Strip feed height: 100–130 mm Feed length per stroke: 5–15 mm Motor power: 15 kW Power supply: 3 × 380 V, 50 Hz Air clutch and brake Compatible with pneumatic strip feeding equipment, which is installed on machine Electrical cabinet and controls inc ...

Technical data & equipmentManufacturer: BORRIES Markier-Systeme GmbH Intended use: Legally required, permanent marking of hydraulic sockets, press fittings and metallic round parts (e.g. marking of standards, batch numbers, manufacturer's marks or hose types). Drive & control: Electromotive drive with built-in control cabinet. Operating modes: Manual / set-up mode / automatic mode (selectable by key switch). Safety: Integrated two-hand safety control (start button at the front) and main switch with emergency stop function. Tool holder & mechanics: Adjustable type wheel / embossing head for holding number, letter and symbol stamps. Manual height adjustment / height adjustment via handwheel for different valve diameters. Mechanical prism holder / bracket for cylindrical components and hydraulic sockets. Incl. accessories

Year of construction 2000 Mobile stacking delivery for marking-free laying Banding display with max. 3 panels Computer control with digital display Bundling with paper or plastic tape Mobile substructure Delivery date: immediately

Used Wentworth Labs 0-020-0101 Probe Card Test and Repair Station With Microscope Unitron ZSB Auction-ID: A1-50936-122