sta used for sale

1,770 litre, Stock number: T3695, Litre: 1770, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 3 pcs., Item: Tank, Standing: 4 pcs. legs with truck grip, Top: Dished, Bottom: Dished, Tank cover: In the top, Ø 450 mm, Turbolence plate: 1 pc., Agitator: Prepared for magnet agitator in the bottom, Working temperature: 0-200° C, Working pressure: -1 - 3 Baro, Inner diameter: Ø 1300 mm, Total height: H 1830 mm, Other: The tank is polished on the inside

Key data: 772 KW, 400 V

MTU CHP 8V4000 L63 incl. exhaust gas heat exchanger, table cooler and control cabinets (see pictures) Type: AE8V4000L63 Weight: 9000 kg Heating water pressure max.: 16 bar Electrical power: 772 kW Thermal power: 800 kW Heating water temperature inlet/outlet: 60/90°C Rated Power Factor: 0.8 cos φ Nominal voltage: 400 V Nominal frequency: 50 Hz Operating hours: 64380 h (as of July 30, 2026) Starts: 1773 (as of July 30, 2026) NOx sensor with monitoring Condition: The machine is currently in operation and in very good condition according to its age. Year of manufacture/operating hours: The CHP plant was built in 2008. In 2016, the engine was replaced and has since run for about 64,400 operating hours. Disassembly: We will drain the water and oil, unlock the machine and disconnect it from the pipes. The dismantling and application is carried out by the buyer. Maintena ...

Combined heat and power plant (CHP) for natural gas operation Manufacturer: Viessmann Year of Make: 2017 Operating hours: 22,334 h Plant starts: 2580 Electrical power: 8.5 kW Thermal power: 20.1 kW Energy input H: 30.1 kW Electrical self-consumption max.: 0.15 kW Flow temperature min./max.: 50/85 °C Return temperature min./max.: 30/65 °C Permissible operating pressure: 1 MPa (10 bar) Condition and availability: The CHP unit is in a well-maintained condition and is immediately available. This system is particularly suitable for economical and self-sufficient heat and power supply in small to medium-sized applications.

- Complete KS case - Very precise

pressure: 600 t ram surface: 3600 x 2500 mm stroke: 350 mm Control: Siemens S 7 no. of strokes: 11 - 44 Hub/min table surface area: 3600 x 2500 mm ram adjustment: 400 mm material width: 500 - 1950 mm material thickness: 0,6 - 2,5 mm mm coil weight: 35 t coil external diameter: 900 - 1900 mm coil internal diameter: 610 mm no. of straightening rolls: 13 straightening roll diameter: 50 mm Stack height: 400 mm stations: 2 total power requirement: kW weight of the machine ca.: 390 t dimensions of the machine ca.: m with reel, Rstraight out Unit, (conveyor system Schleicher) and stacking unit(NSM) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 3550 mm stroke: 1100 mm distance table/ram, max. stroke up, adjustment up: 1900 mm table surface area: 3500 x 1800 mm die-cushion pressure inside the table: 350 t stroke of drawing cushion in table: 295 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in pusher: 160 mm ram surface: 3500 x 1800 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled sliding table: without rails for travel total power requirement: kW weight of the machine ca.: 265 t dimensions of the machine ca.: m overhauled in 1998 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 2560 mm stroke: 1050 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1870 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 395 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 200 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1600 t distance between columns: 3160 mm ram stroke: 1450 mm distance table/blankh.,max. stroke up,adjustm. up: 2250 mm table surface area: 4000 x 2200 mm ram pressure: 1000 t pressure of blank holder: 600 t stroke of blankholder at the bottom: 1000 mm stroke of blankholder with adjustment 0-100 mm: 1450 mm blank holder size: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 275 / 400 mm ram surface: 4000 x 2200 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled oil volume: 9000 l total power requirement: 390 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons) The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

Dimensions (L,W): 1400 x 1750 mm Weight: , kg tiltable yes/no: ja RUCHSER assembly tilting table RU-MKS 1,4 --------------------------------------- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment of machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable from 300-380 ...

Dimensions (L,W): 2000 x 1200 mm Weight: 100 kg tiltable yes/no: nein Bauerle work table ------------------------ Length 2000mm Width 1200mm Height approx. 900 mm (height adjustable) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, conveyor belt -Body: made of stainless steel -1x conveyor belt speed: 16 m/min -1x conveyor belt speed: 8 m/min -Drive: 0.55 kW -Transport belt: with carrier -Belt width: 695 mm -Length: 4500 mm -Number: 2x conveyor belts available -Price: per piece -Transport dimensions: 4550/1000/H1630 mm -Weight: 450 kg

8mt SS Storage Tank To supply & deliver 5 units of 8MT s/steel Vertical Chemical Storage Tank Tank Material: Stainless Steel 304 6.0mm thk 1B plate Tank Cover Material: Stainless Steel 304 3.0mm thk 2B plate [2 Side] Tank size [Diameter]: 1700mm x 3500mm[H] with 150mm cone. Tank Support: 4 nos 80mm & 200mm x 650mm[H] SS275JR M/S Channel Tank Support Ring: a] 3 nos 50mm x 50mm x 5thk SS275JR M/S b] 2 nos dia of 2" SS304 ScH40 pipe c/w S/Steel 10k flanges c] 11 units Internal dia 12mm SS304 step ladder Drive system: 5.5HP x 415V IE3 4 Pole Flange Mounter Motor c/w TPG helical gear reducer with grease vertical mounting. Model: GVS-50-400-10S Torque 233NM Complete with direct drive stirrer system RPM: 145 1 set of 50mm x 100mm x 5thk SS275JR drive system frame. 1 set of 2" S/Steel 304 main drive shaft 2 sets S/Steel standard stirrer channel blade c/w bush 1 set of 2" S/St ...

Test chamber for stability tests Manufacturer: Vötsch Type VP 1300 Pharma For investigations of the shelf life of medicines. The test systems of the VP series have been specially developed for the requirements of laboratories according to the ICH guidelines Test room volume: 1300 l Temperature test: +10 °C to +50 °C, +5 °C to 60 °C Climate test: +10 °C to 50 °C Nominal power 2.7 kW Humidity range: 20% to 90% RH Weight 250kg Documents available

DAMA Stacking Machine 8 units Please take note the spare parts have been removed. PLEASE CONTACT MR. SYAWAL (+6017-2212880) Located at F20

150 l stainless steel container Manufacturer : Sartorius Technical specifications : 150 litre stainless steel tank, heated, double jacket Interior: -1/+3 bar pressure and vacuum resistant Operating temperature 150 °C Double jacket: -1/+4 bar pressure and vacuum resistant Operating temperature 150 °C Documents available GMP Standard mobile

AUTO STAMPING MACHINE UNFOLD BOX FEEDER SYSTEM AUTO STAMPING MACHINE WITH UPGRADE VERSION 2.0 SPECIFICATION : Model : B'Smart 1000 - 2.0 Paper : CARTON & INNER Carton Min. Sise : 371 x 350 x 6.6 (mm) Carton Max. Size : 902 x 890 x 11.3 (mm) Inner Min. Size : 310 x 120 x 10 (mm) Inner Max. Size : 430 x 180 x 10 (mm) Structure Dimention : 2870 x 1045 x 850 (mm) Structure Material : Mild Steel Powder Coat Machine color : Blue Conveyor Speed : 40Meter / Min ( Adjustable ) Feeding Direction : Horizontal Power : 1 Phase

Silverson EX High shear mixer on stand Stainless high shear mixer on stand, 3Kw, 750mm shaft length, high shear diameter 105mm, 3Ph

Gough Engineering Sieving station and filtration unit Stainless, sieving station with WMF dust extraction unit, 555mm diameter mesh, 3Ph

Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg

Oil Management / Pump Unit

Year of construction 1998 Staple Stitching Machine 2 staple heads electr. Drive electr. Footswitch Delivery date: immediately from stock

Key data: 420 KW, 400 V

Sokratherm Gas-CHP GG402 S oE Gas electricity and heat generators from 2009, 56,564 operating hours, conserved in 10/2024, Compact module with soundproofing hood and silencer. 1 available 363 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer 47.2L9C65/4, 600 KVA Manufacturer: Sokratherm Model: GG 402 S oE Type: Natural Gas CHP Serial Number: F91125 Engine: MAN E2842 LE322 Engine Serial Number: 49222368052216 Engine power [KW]: 420 Electric power [KW]: 363 Thermal power [KW]: 495 Gas power [KW]: 995 Year of Make: 2009 Hours: 56,564 Dimensions LxWxH [m]: 3.50 x 1.30 x 2.30 Total unit weight [kg]: 5,990 AC Generator Leroy Somer 47.2L9C65/4 Manufacturer: Leroy Somer Model No.: 47.2L9C65/4 Type: AC Synchronous Generator Serial Number: – Power [KVA]: 600 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 572 Speed [1/min]: 1,500 Year of Make: 2009

approx. 4- 500 pieces, SSI Schaefer, Euro container LTB 8320 - used - : Price per piece, from location: 12.50 € (net)! Manufacturer: SSI Schaefer Type: LTB 8320 Year of manufacture: unknown, Volume: 135 liters Weight: 5.28 kg Temperature resistance: -20 to +100 degrees Dimensions: Exterior Dimensions: Length 800 mm Width 600 mm Height 320 mm Interior Dimensions: Length 752 mm Width 552 mm Height 317 mm Original price: approx. 80.-€ Condition: good, Available: immediately Location: Frankenberg camp / Saxony

VELP OV 625 homogenizer complete with grinding rod and stand New equipment in its original packaging Model No.SA20900470 OV625 Materials: Aluminium – Technopolymers Volume: 0.2 ml – 2.5 L H2O Maximum viscosity: up to 5,000 mPa s Speed: 3,000 – 25,000 rpm Speed Control: Digital Speed adjustment accuracy: 200 rpm With 20mm diameter dispersing tool With stand Power consumption: 800 W Weight: 2.4 kg Dimensions: 92x280x130 mm (3.6x11x5.1 in)

Concrete batching plant 100-120m3/h MIXING SET. FTS 4000 / 3000 horizontal double shaft mixer. (Sicoma, Italy) SET OF 4 HOPPERS AGGREGATE LIFT SYSTEM. Aggregate elevator belt to mixer. Length: 12,100 mm. Band width: 800 mm. Cement weighing scale with a load capacity of 1,500 kg. Construction in 3 mm thick steel sheet. Weighing system using 3 load cells. WEIGHING AND DOSING OF WATER. Weighing scale with a load capacity of 750 liters. Steel sheet construction. Weighing system using 3 load cells. POWER AND CONTROL PANEL. Watertight cabinet to be located in a dosing booth. Automatic operation. Equipped with SIEMENS electrical mechanisms. COMPUTER SYSTEM FOR AUTOMATION AND MANAGEMENT OF CONCRETE BATCHING PLANT DRY MIX/WET MIX. Dynamic control of production flows. Automatic activation of vibrators and fluidisers. Weight safety control in scales. Dynamic cycle corre ...

2 x Forklift basket, work basket, – used - : Price per piece from location: only 350.-€ (net) Manufacturer: Bauer Type: MB-D Year of Make: 1997 Net weight: 120kg Permissible Total weight: 300kg, max. 2 persons Dimensions (LxWxH): 1040 x 1210 x 1990 mm Colour: RAL 2000 Yellow Orange Footprint: 800 x 1200 mm Folding up grille on the back Inner Entry Bag Dimensions: 600 mm / 200 mm / 80 mm Condition: good Available: immediately Location: Frankenberg camp / Saxony

Mixers, make Haarup, planetary mixers = - Make Haarup, type 2250/1500 (2,250 l mixer) - 75 kW, dead weight 6,600 kg - Condition very well maintained and maintained - Available from the end of August 2026

Ponscapaciteit: 80 ton Diameter x plaatdikte: 31 x 20 mm / diameter 60 x 10 mm / diameter 100 inch 6 mm Keeldiepte: 510 mm Maximale snijdikte in plaat: 500 x 20 mm / 400 x 19 mm Bladlengte: 510 mm Hoekstuk van 90° afgesneden: 150 x 150 x 12 mm Hoek van 45° afgesneden: 100 x 100 x 12 mm Rond op lengte gesneden: 50 + 25 mm Op maat gesneden vierkant: 50 + 30 mm Weight: 3 ton

HDG duplex HFFS RB-200-2 Bj 2022 For two small stand-up pouches with reclosure (zipper) per cycle. Conversion to one large pouch possible. Current format: width x height x bottom gusset 90mm x 150/170mm x 2x25mm Output: up to 180 bags per minute (realistically 150-160). Barely run; like new. Without dosage. Location: near Frankfurt

1 lot of retaining rings for exterior and interior, 1 lot of cylindrical pins and taper pins, approx. 30 kg Threaded screws 1 lot of shaft seals

Key data: 75 KW, 400 V

Buderus Gas CHP EN 70 Gas electricity and heat generator from 2011 with 50,524 operating hours. Closed unit with control unit and heat exchanger. 70 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 44.2 S7/4P, 112 KVA Manufacturer: Buderus Model No.: EN 70 Type: Natural Gas CHP Serial Number: 207035 Power [KWel]: 70 Power [KWth]: 109 Engine: MAN E0836 E302 Engine power [KW]: 75 Year of Make: 2011 Hours: 50,524 Weight unit [kg]: 3,000 Dimensions LxWxH [m]: 3.40 x 0.90 x 1.90 AC Generator Leroy Somer LSA 44.2S7/4P Manufacturer: Leroy Somer Model: LSA 44.2S7 C 6S/4 Type: AC Synchronous Generator Serial number: 260460/6 Power [KVA]: 112 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 162 Speed [1/min]: 1,500 Year of Make: 2011 Weight [kg]: 440

Key data: 250 KW, 400 V

Viessmann Gas-CHP Vitobloc 200 EM 238-363 Natural gas electricity and heat generators from 2014, 67,631 operating hours, closed module. 238 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 46.2L9 C 6S/4, 280 KVA Manufacturer: Viessmann Model: Vitobloc 200 EM 238-363 Type: Natural Gas CHP Serial number: 7411152 3 02335 104 Power [KWel]: 238 Power [KWth]: 363 Engine: MAN E2842E312 Engine power [KW]: 250 Year of Make: 2014 Hours: 67,631 Weight unit [kg]: 4,000 Dimensions LxWxH [m]: 4.40 x 1.80 x 2.10 AC Generator Leroy Somer LSA 46.2L9 C 6S/4 Manufacturer: Leroy Somer Model: LSA 46.2L9 C 6S/4 Type: AC Synchronous Generator Serial Number: 304507/1 Power [KVA]: 280 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 404 Speed [1/min]: 1,500 Year of Make: 2014 Weight [kg]: 770

Stainless steel tanks Manufacturer Concept Type PH-1-011 Capacity 4200 liters Material V4A in contact with the product Cylindrical stainless steel tank standing on feet Product space: pressure-resistant/vacuum-resistant +3/-1 bar, operating temperature 143 °C Double jacket: pressure-resistant 3 bar, operating temperature 143 °C No agitator

ponsdop: diameter 28 x 15 mm / diameter 38 x 11 mm Snijkap: 200 x 20 mm / 300 x 15 mm Hoekafschuifkap: 90° 120 x 120 x 12 mm / 45° 80 x 8 mm Stalen breekijzerkap: diameter 35 / 40 mm Inkepingskap: 100 x 42 x 10 mm Punching pressure: 60 ton Max sheet thickness by punching + nibbling: 28 x 15 mm Max punching dia: 110 mm Power needed: 4 kW Length: 1510 mm Depth: 590 mm Height: 1570 mm Weight: 1440 kg

Hot Foil Stamping Tiegel Heidelberg GTP Heißfolienprägetiegel / Hot Foil Stamping Tiegel Heidelberg GTP Baujahr / Year 1966 - Serial-No. 63 613 Format / Size min. 85 x 102mm Format / Size max. 340 x 460mm Geschwindigkeit / Speed min. min. 1.500sph - max. 4.000sph Stanzkraft / Punching pressure 60T Gewicht / Weight approx. 2250kg Abmessungen / Dimensions 2,08 x 1,48 x 2,10m Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame

Faltschachtelklebemaschine / Folder Gluer Lamina 1800GL WS Year 2016 - 1037516 Manual fed in-line folding, gluing and taping machine Format min. 70mm - max. 1800mm Nordson hotmelt Gluing Unit - 2 gluing hedas Speed 0-40 m/min PLC control with touch screen The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. By the genius construction it is able to handle various sizes of different materials. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc.

Antique Embossing Hot Stamping Press Karl Krause KHP Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Baujahr / Year ca. 1930 - Serial-No. 48090 Prägefläche / Embossing Size max. 340 x 430mm Beheizung mit Gas / Heating with Gas Wunderschön verarbeitete antike Kniehebelprägepresse  Beautifully crafted antique Embossing Hot Stamping Press

Letter Press Tiegel - DIE Cutter Heidelberg OHT Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1969 - Serial-No. 171075 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm

Unloader for Piles Polar TR 1ER110-4 Ablader für Stapel - Unloader for Piles Polar TR 1ER110-4 Baujahr / Year 1996 - Serial-No. 6793004 Bogen-Format / Sheet Size max. 850 x 1250mm Lagengewicht / Ream weight max. 300kg Palettenhöhe / Pallet height min. 110mm Die mühelose und wirtschaftliche Art, Einzel- und Mehrfachnutzen mit hoher Präzision abzustapeln. Vorteile: Erhebliche Produktivitätssteigerung Sehr gute Stapelqualität Schonende Materialbehandlung Hochwertige Technik The ergonomic and economically effective way to restack single and multiple cuts with high precision. Advantages: Increased productivity Very good restacking results Careful material handling Latest technology

Kann zum Stanzen von Papier, Pappe und Aluminimum eingesetzt werden. Can be used for punching Paper, Cardboard and Aluminum. Stanzmaschine / Punching machine Krause FY 43 UB  Serial-No. 313200 Arbeitsbreite / Working width max. 400mm Zum Stanzen von Papier, Pappe und Aluminimum For punching Paper, Cardboard and Aluminum. 2 Hand-Auslösung / 2 Hand release mit Fußschalter pneumatisch zum Fixierung des Produktes with pneumatic foot switch for fixing the product

Stanztiegel in einem guten Zustand / Letter Press DIE Cutter in good Condition Stanztiegel / Letter Press DIE Cutter Heidelberg GTS Baujahr / Year 1965 - Serial-No. 62990 Size min. 85 x 102mm - max. 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Stanzleistung / Punching Pressure 60T Weight approx. 2250kg Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame

Heißfolienprägemaschine mit 25000kgs Druckleistung / Hot Foil Stamping machine with Pressure 25.000Kg Heißfolienprägemaschine / Hot Foil Stamping GEBA BAIER 49/25 Baujahr / Year 1972 - Serial-No. 72425 Druckleistung / Pressure max. 25.000Kg Prägefläche / Embossing size max. 300 x 430mm Höhenverstellung / Height adjustment ca. 190mm In einem guten Zustand / In good condition

In einem sehr guten Zustand, Letter Press Cylinder DIE Cutter Heidelberg S in good working condition. Stanzzylinder / Automatic DIE-Cutter Cylinder Heidelberg S Serial-No. 13934 Size max. 540 x 720mm Speed min. max. 4.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame

Heißfolienprägemaschine in einem guten Zustand / Hot Foil Stamping Baier GEBA 1/F in good condition Heißfolienprägemaschine / Hot Foil Stamping Baier GEBA 1/F Serial-No. 26048 Druckleistung / Pressure max. 600Kg Prägefläche / Embossing size max. 180 x 220mm In einem guten Zustand / In good condition

Elektrohefter für Block- und Sattelheftung Electric Stapler Nagel Rinak for flat block - saddle stapling Elektrohefter  - Electric Stapler Nagel Rinak für Block- und Sattelheftung / for flat block - saddle stapling Neu unbenutzt / brand new Year 04/2021 - Serial-No. 3551000 Blockheftung: bis 4 mm ca. 40 Blatt (80 g-Papier) Broschüren: bis 3 mm ca. 30 Blatt (80 g-Papier) Heftklammern: 26/6, 26/8S, Ri 26/6 Anlagetisch lässt sich durch einfaches Kippen zur Block oder Sattelheftung umstellen Heftkopf-Schlagstärke einstellbar verstellbarer Seitenanschlag Auftischmaschine zur Befestigung an der Tischplatte Kapazität Klammermagazin: 210 Stück Einlegetiefe: 30 mm (bei Blockheftung) Anschluss: 230 V / 50 Hz Maße: B540 x T370 x H360 mm Gewicht (netto): 16 kg

Foil Stamping & Embossing Machine Kolbus PE 70 with automatic Feeder and Pre-stacking conveyor. Heißfolienpräge- & Prägemaschine / Foil Stamping & Embossing Machine Kolbus PE 70 Baujahr / Year 1979 - Serial-No. 178 Open cover size  min.170 x 100mm - max. 660 x 405mm Printing surface 420 x 355mm Pressing power 35 tons Geschwindigkeit / Speed max. 70 cycles/min. Vorstapel Föderband / Case Pre-stacking conveyor Anleger für Buchdecken / Feeder for cases Deckenausbiege Station / Case bending station Folientransportvorrichtung / Foil transporting device Folienabwickelvorrichtung / Foil unwinding device

# HP Jet Fusion 5200 – Produktionsbereites MJF-System mit vollständiger Peripherie Zum Verkauf steht eine HP Jet Fusion 5200 aus dem Jahr 2019, eine industrielle 3D-Druckanlage auf Basis der MJF -Technologie für die wirtschaftliche Serienfertigung von Kunststoffbauteilen. Die Anlage wurde im August 2020 in Betrieb genommen und verfügt über ca. 5.100 Betriebsstunden. Ein aktiver Wartungsvertrag läuft bis 20.01.2026. Lieferumfang HP Jet Fusion 5200 Druckeinheit Post Processing Station für Pulverentfernung und -aufbereitung 2 Build Units (parallele Produktion, reduzierte Stillstandzeiten) 2 Pulverfässer Transportstapler für Build Units und Materialhandling Technische Spezifikation Bauraum: 380 × 284 × 380 mm Schichtdicke: ca. 80 µm Materialien: PA12, PA12 GB, PA11 (je nach Konfiguration) Pulvermanagement: Automatisiert über Post Processing Station Betriebsart: Industrieller Da ...

5,000 litre, Stock number: T3997, Litre: 5000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the top, Ø 450 mm, Agitator: Yes, Agitator type: 2-blade propeller, Agitator placement: From the top, Motor: 0.75 kW - 22 rpm, CIP: Yes, Inner diameter: Ø 2000 mm, Total height: H 2800 mm

Stainless steel tanks Capacity 250 litres Cylindrical stainless steel tank standing on feet single-walled, hinged lid Agitator from above Dimensions: Diameter inside 63 cm Diameter outside 65 cm Cyl. Height 80 cm Outlet DN 40