sta used for sale

Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk

Vertical Cylindrical Conical Bottomed Fermenter. Stainless Steel. - Second Hand 2500L / 25HL - Brim Full Capacity Top entry manway doors. Cooling Jackets, insulation and cladding, with two cooling zones on cone and tank wall. Fully Welded Cladding in stainless, insulated 50mm. Sample tap & temp probe pocket. Bottom outlet with 1.5" RJT Male Valve. Manufactured Approximately 2015. Total Height: 3330mm - 3100mm - depending on which tank. OD: 1750mm - 1650mm - depending on which tank. For more information and more available stock please visit us at - advancedbrewing.co.uk

1000l Cylindroconical Vessel Vertical stainless steel tank Floor Length Cladding Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 2300mm Side entry man way door with DIN 15 Male Sample Port Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Temp Probe Pocket Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000L Vessel - Dish Bottom Vertical stainless steel tank Manufacturer: BBG Diameter Approx 1200mm Overall height Approx 1900mm Side entry man way door with DIN 15 Male Sample Port and Sample Tap Cooling Jackets Insulated with stainless steel cladding CIP Arm with Spray Ball Bottom Central Outlet DIN 50 Male Racking Outlet DIN 25 Male Temp Probe Pocket 2 x Sight Glasses 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

1000l Vessel - Dish Bottom Vertical stainless steel tank Diameter Approx 1050mm Overall height Approx 1650mm Side entry manway door Single skin stainless steel 1.5" RJT Top and Bottom Fittings Sight Glass DIN 80 Top fitting for gas vent 3 x Adjustable Feet Second Hand For more information and more available stock please visit us at - advancedbrewing.co.uk

Container roller set, container rollers for moving standard containers, Haacon, 16 to load capacity – used -: Price from location: 7.500.-€ (net) Manufacturer: Haacon Type: 4336.16-231720 Year of Make: 2022 Factory number: 1074982-01-00-001-51 Component Number: 215993 Load/set: (4 units): 160kN Load/Unit: 60kN Rolling speed: max. 6km/h Container castors for moving standard containers Handlebar for handling the roller when dismantled and for resteering with parking brake Castor set consisting of pull linkage, four swivel castors, lockable in the direction of travel Taxiing up to 6 km/h Former new price: 9.907.-€ Available: immediately Condition: like new – only used about 3 times Location: 79183 Waldkirch

A fully automatic hot stamping press Oropress for gold and silver hot stamping is available. Press force: 5t, sliding table dimensions X/Y: 250mm/250mm, die dimensions X/Y: 120mm/200mm, max. operating temperature: 250°C. A rotary switch of the machine is missing and the adjustment is carried out using a screwdriver. One tension roller was repaired with a new flange bearing. Including foil feed unit. An on site inspection is possible.

Stainless steel vacuum vessel 1370 Ltr, vacuum -1/0,5bar, maximum allowed Work Temp 110C , down two outlets DN50, mounted on stainless steel frame 1220x1020mm total height 2800mm

VALOREL Stainless Steel Vessel 620 Ltr. with propeller stirrer, allowed pressure 2,5/-1bar, max. temp 150C , on top there is a inlet 50mm for clamp connection, down outlet valve diameter 2"

8-digit rotary machine, make Breitner, type IDR 2885, year of manufacture 1985, With template – pressure vessel,, Filling range: 10 - 10,000 ml,, Connected load: 4 kW, Used for delicatessen + mustard (200 + 250 ml - jars)

500 litre, Stock number: T4031, Litre: 500, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Bottom: Conical, Double jacket: Yes, Insulated: Yes , Outer cladding: Fully welded stainless, Tank cover: Half hinged lid, Agitator: Yes, 2 pcs., Agitator type: Anchor with scrape and propeller, Agitator placement: From the top, Motor Anchor: 0.55 kW - 230/400 Volt - 25 rpm, Motor Propeller: 1.5 kW - 220/380 Volt - 925 rpm, Inner diameter: Ø 800 mm, Outer diameter: D 920 mm, Total height: H 2000 mm

1,500 litre, Stock number: T4016, Litre: 1500, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 5 pcs., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the top, Ø 400 mm, Inner diameter: Ø 1100 mm, Total height: H 2280 mm

Agfa Elantrix ST 125 SX Pressure Plate Stacker; cleaned and tested; Panel width 300-1250mm; Panel length 275-1470mm; Panel speed 400-2500mm/min.; Printing plate trolley. Plate stacker Agfa Elantrix ST 125 SX; cleaned and checked; plate width 300-1250mm; plate lenght 275-1470mm; plate speed 400-2500mm/min.; plate trolley.

A vertical mixer for powders and granulates Cavicchi is available. Volume: 180l. The machine has an unspecified, presumably electrical defect. Without mixing bowl. An on-site inspection is possible.

Closed stainless steel butter silo. Single jacketed. Vacuum on the silo is possible (manometer 0 / - 1,0 Bar). The horizontal buffer silo is equipped with 2 augers (driven by 1 main motor of +/- 3 kW - 380 V - 50 Hz - 1.420 rpm - n2: 14 rpm, no nametag on motor, only on drivework). Total capacity: 3.000 kg. Manhole, round, on one side and a sight glass on the same side. 1x infeed possibilities for direct connection of the outfeed pipe from a Continuous Butter Machine (CBM) on the back side and one on the side of the QHK butter silo (DN100). CIP cleanable with spraybowl in the top. Outfeed plate with 1x rectangular flange and 1x round DN100 flange on the outfeed of the silo. Excluding control panel or outfeed butterpumps., Type of Machine: Buttersilo, Capacity: 3.000 kg, Motor: +/- 3 kW - 380 V - 50 Hz - 1.420 rpm - n2: 14 rpm, Dimensions: ± 275 x 200 x 225 cm, Weight: ± 1.500 kg

An in-line workstation Nutek for PCB inspection and manual work is available. Component length range: 80mm-460mm, component width range: 50mm-407mm, component edge support: 3mm, component clearance top/bottom: 30mm/30mm, transfer height range: 925mm-975mm, conveyor speed: 14m/min, machine dimensions X/Y/Z: approx. 1500mm/1100mm/2200mm, weight: approx. 150kg. Documentation available. An on-site inspection is possible.

Stock number: F1127, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Unscrambler, Standing: On legs, Construction: Erecting of bottles etc., Dimensions: L 2350 x W 1100 x H 1550 mm, Conveyor: Plastic lamella, Conveyor dimensions: L 1300 x W 82 mm

Aluminium Cake Stand Wedding 3 Levels Alu à ̃ 20 26 32Aluminium Cake Stand Wedding 3 FloorDiameter ̃ 20 à ̃ 26 à ̃ 32Weight approx. 1500 gTotal height: approx. 38 cmShelf spacing 17cmATTENTION: Aluminium is not dishwasher safe! Details see picture

Stock number: R284, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Agitator, Head: D 330 mm, Motor: 5.5 kW - 220/380 Volt - 1425 rpm

Pastry forming roller Kalmeijer KGM NEW 1123.900 A Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1123.900 A Details see picture ADVANTAGES Heating of the figure roller, do not sprinkle flour and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Pastry Forming Roller 1291.900 A Kalmeijer KGM NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1291.900 AÂ Details see picture PLUSES Heating of the figure roller, do not sprinkle flour and thus better baking method Changing the figure roller without tools within a minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Pastry forming roller 1120.923 A Kalmeijer KGM NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1120.923 A Details see picture PROS Heating of the figure roller, do not sprinkle flour and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Pastry forming roller 1100.931 A Kalmeijer KGM NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1100.931 A Details see picture ADVANTAGES Heating of the figure roller, do not sprinkle flour and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

1100.932 A Pastry forming roller Kalmeijer KGM NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1100.932 A Details see picture PLUS POINTS Heating of the figure roller, no flour sprinkling and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

1100.936 A Pastry forming roller Kalmeijer KGM NEW Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1100.936 A Details see picture ADVANTAGES Heating of the figure roller, no flour sprinkling and thus better baking method Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1120.925 A Pastry Forming Roller Standard Rollers 250mm NEWÂ Manufacturer : Kalmeijer Type : KGM 250 NEW Order Number : 1120.925 A Details see picture ADVANTAGES Heating of the figure roller, do not sprinkle flour and thus better baking method Change of the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Kalmeijer KGM 1120.922 A Pastry forming roller Standard rollers 250mm NEWÂ Manufacturer : Kalmeijer Type : KGM 250 NEW Order number : 1120.922 A Details see picture PLUS POINTS Heating of the figure roller, no flour sprinkling and thus better baking Changing the figure roller without tools within a minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Pastry Forming Roller Kalmeijer KGM NEW 1120.930 A Manufacturer : Kalmeijer Type : KGM 250 NEW Order Number : 1120.930 A Details see picture ADVANTAGES Heating of the figure roller, no sprinkling flour and thus better baking Changing the figure roller without tools within one minute Baking tray transport can be folded down, takes up little space. Â Kalmeijer KGM pastry forming roller Standard rollers 250mm Removable dough feed roller, so easy to clean Adjustable thickness of the dough figures (for the right weight)

Drilling machine, drill press, pillar drill, column drill -Condition: Working -Note: Clamping table repair-welded, see pictures -Manufacturer: Flott, column drill type SB 15 -Spindle mount: MK2 -Motor: 0.525 kW -Speed adjustment: via V-belt -Speed speeds: 215 - 400 - 730 - 1250 - 2300 - 4300 rpm -Table size: 220 x 220 mm -Spindle holder: MK2 with drill chuck -Travel: 360 mm -Spindle stroke: 55 mm - Throat: 295 mm -Column Ø: 100 mm -Accessories: collecting tray for coolant -Dimensions: 930/700/H1805 mm -Weight: 190kg -Handover: in current condition as seen

Stainless steel, VA, chrome-nickel steel, material cuts, stainless steel, chrome steel, rust-free -Material: cutting and manufacturing -Round steel, tubes and sheets -different materials: in stock -Material numbers: 4301, 4541, 4571, 1.4828, 1.4876, 1.4841, 1.4878 -Please ask for the material you want with the dimensions. -Price from: per kg and cut depends on material

Theodolite tripod, theodolite stand, measuring frame, stand, assembly stand, steel stand, welding table, assembly table, support stands, support feet, work stand, saw roller stand, saw roller stand, sawhorse, roller conveyor stand -can be moved sideways -Height adjustable: 1040-1380 mm -Number: 7x tripods available -Price per piece -Transport dimensions: 610/750 / H1040 mm -Weight: 120 kg / piece

Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench, rivet gun, rivet gun, blind rivet gun, -Drive: torque module for Hilok assembly -Torque: adjustable via touch screen -Number of press-in cylinders: 1 piece -Number of helical gears: 1 piece -Working platform: 800 x 500 mm -Travel: Y 400 mm, X 955 mm -Dimensions: 1555/1470/H2110 mm -Weight: 794 kg

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, accessories -Manufacturer: AMF, Staircase trestle DIN 6318 2 pieces = 1 set -Type: AMF 230 DIN6318 -Usage: in pairs -Clamping height: 192.5 - 230 mm -Price/Sale: complete -Overall dimensions: 108/68/H230 mm -Weight: 6.6 kg

Assembly star, assembly table, workbench, welding table, clamping plate, turning device, container turning device, welding turning device -Load capacity: 100 kg -Working width: 635 mm -Max. Diameter: mm -completely rotatable -Number: 1x devices available -Price: per piece -Dimensions: 1355/200/H450 mm -Weight: 19 kg

Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -stable design -electrically powered -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm -Conveyor belt transfer: 1400 mm -pneumatic lifting -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Adjustable delivery height: 950 mm -driven: via timing belt -Dimensions: 1450/1650/H1000 mm -Weight: 420 kg

Drill, drill press, pillar drill, pillar drill -Table size: 275 x 215 mm -Spindle mount: MK3 -Projection: 280 mm -Speeds: 200-1450 rpm -Columns: Ø 120 mm -Spindle stroke: 100 mm -Translation via: Gears -Number: 1x drilling machines available -Price per piece -Dimensions: 360/600/H1945 mm -Weight: 230kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box made of: stainless steel -Stuffing box for: Ø 38 mm shaft -for: gland tape -Price: per piece -Number: 8 pieces -Dimension: Ø 101 x 45 mm -Weight: 1 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 50 mm -Transport roller width: 265 mm -Total length: 310 mm -Socket: Ø 14 mm -Wrench size: 12 mm -Number: 30 rolls available -Price: per piece -Weight: 0.9 kg/piece

Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -Design: stable -Drive: electric -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm -Conveyor belt transfer: 1400 mm -pneumatic lifting -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm -Delivery height: 2150 mm, adjustable -driven: via timing belt -Dimensions: 1600/1750/H2150 mm -Weight: 500 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 60-62 mm shaft -for gland tape -Number: 19x glands available -Price: per piece -Dimensions: 147/147/H70 mm -Weight: 2.8 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 40 mm shaft -for gland tape -Number: 3x glands available -Price: per piece -Dimensions: 145/145/H66 mm -Weight: 3.1 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 50-52 mm shaft -for gland tape -Number: 8x glands available -Price: per piece -Dimensions: 144/144/H68 mm -Weight: 2.9 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 70 mm shaft -for gland tape -Number: 2x glands available -Price: per piece -Dimensions: 155/155/H71 mm -Weight: 3.9 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 95 mm shaft -for gland tape -Number: 2x glands available -Price: per piece -Dimensions: 180/180/H82 mm -Weight: 6.6 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 90 mm shaft -for gland tape -Number: 2x glands available -Price: per piece -Dimensions: 175/175/H80 mm -Weight: 6 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: made of stainless steel -Stuffing box: for Ø 110 mm shaft -for gland tape -Number: 2x glands available -Price: per piece -Dimensions: 205/205/H84 mm -Weight: 8.5 kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -stable execution -electrically driven -Drive motor roller conveyor: 0.18 kW 71 rpm -Drive motor conveyor belt: 0.18 kW 88 rpm -Roll width: 1440 mm -Conveying length: 1550 mm -Transfer of conveyor belts: 1400 mm -pneumatic lifting -Diameter roller: 105 mm -Rollers: rubberized -Diameter shaft: 25 mm -Delivery height: 950 mm adjustable -driven: via toothed belt -Number: 1x roller conveyors available -Price: per piece -Dimensions: 1550/1650/H950 mm -Weight: 420 kg

Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench -Torque module: for mounting water meters or other screw connections -Frequency converter: from Yaskawa type VARISPEED 616G5 -Mounting device: for water clocks -Speed and torque: adjustable -various Recordings: for water clocks -Dimensions: 1500/650/H2060 mm -Weight: 314 kg -The two geared motors each have a power: of 1.5 kW and a speed of 38 rpm -Dimensions: 880/600/H920 mm -Weight: 132 kg

Trusses, trade fair construction, trade fair trusses, lattice masts, partition walls for trade fair stands -Quantity: 4x transport trolleys with partitions and lamps -Equipment: 3x frames, each with 2 pieces lamps size 1500 x 2500 mm -Accessories: see photos -Transport dimensions: 1350/950/H900 mm -Weight: 120kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -Execution: stable -without drive motor roller conveyor -Roll width: 590 mm -Conveying length: 1800 mm -Diameter roller: 80 mm -pneumatic lifting: 30 mm -Delivery height: mm adjustable -Number: 1x stations available -Price: per piece -Dimensions: 2070/925/H205 mm -Weight: 266 kg