140,462 used machines on RESALE, but how to find them? Machine Search
10,000 litre, Stock number: T2662, Litre: 10000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On leg rack, 8 pcs. of legs, Top: Dished, closed, Bottom: Dished, Heating coil: Yes, in the bottom, Insulated: Yes, Outer cladding: ½ stainless and ½ iron, Tank cover: In the top, Ø 400 mm, Agitator: Yes, and flange for agitator in the side, Agitator type: 3 pcs. propeller, D 700 mm, Agitator placement: From top with bottom guideway, CIP: Yes, Inner diameter: Ø 1880 mm, Outer diameter: D 1980 mm, Total height: H 4850 mm
Width 68 cm Year of construction 2019 2nd station: 2 fold pockets 68 cm Downstream knife shaft Delivery date: immediately Price on request. We supply and install worldwide.
On offer is this Volvo V60 D3, first registered on April 11, 2012 and with a mileage reading of 256,825 km. This comfortable and practical estate is powered by the well-known 2.0-litre D3 diesel engine, good for 120 kW / approximately 163 hp, in combination with an automatic gearbox with manual +/- shift function. The V60 is richly equipped and features a black leather interior, an electrically adjustable driver's seat with memory function, an electric sliding/tilting roof, cruise control, automatic dual-zone climate control, Bluetooth/telephony, multifunction steering wheel and an integrated Volvo audio system. This Volvo also has a lot to offer practically. The estate has a spacious luggage compartment with luggage cover, roof rails, electric windows front and rear, electrically adjustable exterior mirrors and rear parking sensors. The combination of the powerful D3 diesel engine, auto ...
10,000 litre, Stock number: T2661, Litre: 10000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On leg rack, 8 pcs. of legs, Top: Dished, closed, Bottom: Dished, Insulated: Yes, Outer cladding: ½ stainless and ½ iron, Tank cover: In the top, Ø 400 mm, Agitator: Yes, and flange for agitator in the side, Agitator type: 3 pcs. propeller, D 700 mm, Agitator placement: From the top with bottom guideway, Motor: 0.55 - 220/380 Volt - 52 rpm, CIP: Yes, Inner diameter: Ø 1880 mm, Outer diameter: D 1980 mm, Total height: H 4850 mm
10,000 litre, Stock number: T2660, Litre: 10000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On leg rack, 8 pcs. of legs, Top: Dished, closed, Bottom: Dished, Double jacket: Yes, Tank cover: In the top, Ø 400 mm, Agitator: Yes, Agitator type: Propeller, Agitator placement: In the side, Motor: Ystral; 2.3/3.4 kW - 380 Volt - 715/1435 rpm, Inner diameter: Ø 1880 mm, Total height: H 4300 mm, Other: The tank is slightly dented
Complete Stainless Steel Cold Rolling Facility from Hyundai Steel STS Incheon Capacity: 239.000 TPY Width: 600 – 1320 mm Stainless 304 and 430 Consists of: (2) 'Production Machinery Co.' Annealing and Pickling Lines (Lot 1) (2) 'SMS' 20-Hi ZM Cold Strip Mill (Lot 3, Lot 4) 'SMS' 2-Hi Skin Pass Mill (Lot 5) 'Production Machinery Co.'& Coil Preparation Line (Lot 6) 'Production Machinery Co.' Grinding and Polishing Line (Lot 7) 'Honda' Cut-to-Length Slitting and Shearing Line (Lot 9) 'Honda' Slitting/Recoiling Line (Lot 10) These production lines come from reputable Original Equipment Manufacturers, including two 20-Hi Sendzimir Mills originally from DEMAG-SACK, now under SMS. With a proven track record of performance and meticulous maintenance, these assets represent a remarkable investment opportunity.
200 litre, Stock number: T2648, Litre: 200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Agitator: Yes, Agitator type: Manual from the top, Inner diameter: Ø 500 mm, Outer diameter: D 600 mm, Total height: H 1650 mm
BALZERS LTE 020 – Thermally controlled sample preparation station ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy/ • Digital display unit with 4 channels (B1-B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate control for mains & lamp • Power supply: 220 V Hint: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. More items - new and used - can be found in our shop! International shipping costs on request!
430 litre, Stock number: T2623, Litre: 430, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of legs, Top: Open with lid, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Turbolence plate: 2 pcs., Agitator: From bridge in the top, Agitator type: Frame agitator with propeller, Motor: 0.55 kW - 220/380 Volt - 77 rpm, Inner diameter: Ø 850 mm, Outer diameter: D 1000 mm, Total height: H 1680 mm, Other: The tank has an internal repair due to overpressure in the double jacket
11,200 litre, Stock number: T2622, Litre: 11200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On leg rack, Top: Open with strengthening ring, Heating coil: In the bottom, Insulated: Yes, Outer cladding: Riveted trapez plate, Agitator: Yes, Agitator placement: In the side, Motor: 0.74 kW - 220/380 Volt - 940 rpm, Inner diameter: Ø 2120 mm, Outer diameter: D 2330 mm, Dimensions: W 2680 x H 3545 mm
With remote control; including \"Konfel\" conference set Auction-ID: A1-52087-636
70 litre, Stock number: T2605, Litre: 70, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tiltable boiler, Standing: 2 pcs. legs, Top: Open with lid, Double jacket: Yes, Motor: 13 kW - 380 Volt, Inner diameter: Ø 430 mm, Dimensions: D 1050 x H 1000 mm, Other: Electrical heating in bottom
0: ja Working width: 3000 mm 0: nein Eder + Mueller fitting centre for windows --------------------------------- Sale on behalf of the customer from the customers location. The machine was in use until closing and is now at the customers warehouse. Previous hardware: Maco Multi Matic (other hardware is also possible) Technical manufacturers description: --------------------------------- Table height and working angle mechanically adjustable with permanently mounted hardware bearing Sash stop table, length 3,000 mm, with fixed hardware bearing Felt-bonded support 12 pivoting counterholders for hanging the sashes Hardware detection for centered and constant gear position 1 storage unit with 4-way air connection with automatic special screwdriver with pneumatic depth stop 6-way turret stop for different screw depths Pneumatic height adjustment for 6 screw levels Automatic screw feed Manual ...
200 litre, Stock number: T2584, Litre: 200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Balancetank, Standing: 3 pcs. legs, Top: Open with strengthening ring, Inner diameter: Ø 630 mm, Total height: H 970 mm, Other: Mechanical float
10,000 litre, Stock number: T2511, Litre: 10000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, closed, Bottom: Plain sloping, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the side, Agitator: Yes, Agitator type: 2 pcs. mixing wings, D 650 mm, Agitator placement: From top with bottom guideway, Motor: 2.2/3.4 kW - 400 Volt - 75/150 rpm, CIP: Yes, Inner diameter: Ø 2230 mm, Outer diameter: D 2310 mm, Total height: H 3300 mm
750 litre, Stock number: T2514, Litre: 750, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 7 pcs., Item: Transportation tank, Standing: 4 pcs. legs with truck grip, Top: Conical, Bottom: Conical, Tank cover: In top, Ø 400 mm, Inner diameter: Ø 940 mm, Total height: H 1700 mm
2,000 litre, Stock number: T2506, Litre: 2000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Riveted stainless cladding, Tank cover: In the top, Ø 450 mm, CIP: Washing wing, Inner diameter: Ø 1200 mm, Outer diameter: D 1300 mm, Total height: H 2450 mm, Other: The tanks outer cladding is dented
500 litre, Stock number: T249, Litre: 500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of legs, Top: Open, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Motor: 0.55 kW, Inner diameter: Ø 900 mm, Total height: H 1760 mm
240 litre, Stock number: T2477, Litre: 240, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On leg rack, Top: Open with strengthening ring, Bottom: Conical, Double jacket: Yes, Agitator: Yes, in the bottom, Agitator type: Propeller, Motor: Yes, Inner diameter: Ø 635 mm, Total height: H 1200 mm
Key data: 264 KW, 450 kVA, 400 V
Jenbacher Gas-CHP J 208 GS-C Gas electricity and heat generator from 1994 with 67,000 operating hours, CHP unit with control and silencer, additional parts. 1 available 253 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC 534C2, 450 KVA Manufacturer: Jenbacher Model: J 208 GS-C Type: Gas CHP Engine Serial Number: 21619 Engine power [KW]: 264 Electrical power [KWel]: 253 Speed [1/min]: 1,500 Year of Make: 1994 Hours: 67,000 Weight unit [kg]: 5,000 Dimensions LxWxH [cm]: 450 x 150 x 195 AC Generator Stamford HC 534C2 Manufacturer: Stamford Model No.: HC 534C2 Type: AC Synchronous Generator Serial number: 49059/2 Power [KVA]: 450 Voltage [V]: 231 / 400 Frequency [Hz]: 50 Current [A]: 649 Speed [1/min]: 1,500 Year of Make: 1994
6,200 litre, Stock number: T2454, Litre: 6200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Dished, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the side, 500 x 400 mm, CIP: Yes, Working temperature: 80° C, Working pressure: 3,0 Bar, Inner diameter: Ø 1750 mm, Outer diameter: D 1950 mm, Total height: H 3850 mm
Key data: 2000 KW, 2500 kVA, 400 V
2MW Cummins QSV91 available complete with control panel, gas line, heat exchanger, log books and maintenance manuals etc.
maximum number of results exceeded
please refine your search
1.500 € 
