129,264 used machines on RESALE, but how to find them? Machine Search
1 factory-tested, very well preserved single girder crane angle load approx. 5,000 kg Wingspan approx. 10,000 mm Hook path about 7,500 mm Make steel Workshop examination 2016 Floor control equipped with angle trolley for optimal hook path, freely movable working speeds: Hoist approx. 0.8/5.0 m / min Trolley gear approx. 5.0/20,0 m / min Crane chassis approx. 4.0/16.0 m / min
1 factory-tested single angle crane in design with laterally movable carrier trolley Load approx. 5,000 kg Span approximately 33,000 mm Hook way max. 9000 mm Make AUMUND/steel Year of production/workshop test 1981/2016 with steel angle trolley for maximum hook path, DEMAG Kranfahran- drove, corridor control freely movable Working speeds: Hoist approx. 1.3/8.0 m / min Trolley gear 10.0/40.0 m / min Crane chassis up to 60.0 m / min
1 factory-tested double girder overhead travelling crane Load approx. 6,300 kg Wingspan approx. 14,000 mm Hook path Max 10.000 mm Make steel Workshop examination 2016 Crane equipped with steel double girder trolley, corridor control working speeds: Hoist approx. 0.8/10.0 m / min Trolley gear approx. 14.0 m / min Crane chassis 10.0/40.0 m / min
1 factory-tested, absolutely Mint double girder crane as crane trolley with 2 elevators, particularly suitable for traverse operation Load approx. 2 x 6,300 = 12,600 kg Span 14,950 mm hook path about 6,000 mm Make steel Year of production/workshop inspection 2002/2016 Crane equipped with Swivel trolley, maintenance stage, split head support for optimal wheel load distribution, radio control working speeds: Hoist CA. 0.6/4.0 m / min Trolley gear about 2.5/10.0 m / min Crane chassis up to approx. 40.0 m / min
1 factory-tested, well preserved steel double girder overhead travelling crane Load approx. 16,000 kg Track width approx. 13,500 mm hook path approximately 3,600 mm Katz gauge approximately 4,200 mm Year of production / workshop test 1990/2016 Crane equipped with double girder trolley and steel drive units suitable for traverse operation, radio control, catwalk and overload protection Working speeds: Hoist CA. 0.6/4.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 4.0/16.0 m / min
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 very well preserved double girder crane ideally suited to the transport and use of long goods crane driving towards Load approx. 4 x 4,000 = 16,000 kg track width approx. 20.565 mm Hook path about 6.500 mm Make steel Year of construction/renovation 1990/1993 Workshop overhaul 2016 FEM 3 m Crane equipped with high-quality wind factory units, synchronous and separately controllable to apply loads, radio control Working speeds: Hoist CA. 1,2/12.0 m / min Trolley gear approx. 5.0/20,0 m / min crane chassis approx. 10.0/40.0 m / min
Tyre testing machine - static balancer for passenger tyres. Tyre size from 15 "to 18" (20") CE certified More details see the attached description!
Pump vacuum cleaner with integrated submersible pump that continuously pumps absorbed liquids out of the container, RCDs in the mains connection cable, special filter bags, application-oriented accessories. The pump can be completely removed and the container closed, so this industrial vacuum cleaner can also be used as a normal wet-dry vacuum cleaner. Areas of application: Suction/suction of large quantities of liquid, use in floods, use in flat roof renovation, cleaning of garden ponds and pool facilities. SCOPE OF DELIVERY Including accessory set pump vacuum cleaner. Additional filter 1 x FSS 1200 (foam) Filter bag 1 x FSN 80 1 x Suction hose Ø 35 mm x 5 m 1 x Drain hose Ø 33 mm x 5 m 1 x Handle tube plastic with secondary air slider 2 x Suction pipe plastic (each 50 cm) 1 x Aluminium professional floor nozzle 45 with rubber and briste strips EQUIPMENT Main filter FPP ...
Single column - eccentric press, STANKO, K 1430 A - 100t BJ. 1985 Tech. Condition very good, - pressure: 100 t -Projection: 320 mm -Stroke: 10-130 mm -Mounting height: 400 mm -Table size: 850 x 560 mm x 100 mm -Tappet adjustment: 100 mm -Stroke: 50-53 / per min. -Machine weight: 8800 kg -Dimensions (W x D x H): 1.60 x 1.85 x 2.9 m Camshaft gear ROSS/Herion Herion valve Auxiliary brake DESCH Lutex ZB 200 Two hand release -transverse eccentric shaft and pneumatically actuated clutch / brake Komi nation -suitable for inlays in two-hand operation -secure setting -Single stroke, continuous stroke MOT testing in 04/2016
Model: Starmatic type: K080-xx5 Model: 900-24-480-8-6-130 built: 1992 Performance: 34.000 bottles / h Direction: right machine Feeding: parallel Aggregate: Hull PWL410, back PWL410 Glue roller: steel glue roller Management: 2 x inlet star, 2 x outlet star Labels-L =: min. 50mm, 180mm Bottles-D =: min. 50mm, 125mm Voltage: 220/380 V Labels: Body, chest, back from the site: "as is" condition in a functional State or from site: outdated State with 12 months warranty Machine dimensions: 2.20 x 1.80 meters. The dimensions refer to the base without excess of aggregates and spout extension
used
Table size: 700 x 1200 mm traverse path x/y/z: 600/300/350 mm spindle retainer: SK 40 ISA kl. / gr. Table/spindle distance: 150/540 mm spindle speeds: 45-6000 rpm number of tool stations: 12 pieces feeds: 5000-20000 mm / min rapid traverse rate: 5000-20000 m / min spindle drive: 5.5 kW Electr. Supply: 380 V, 12 kVA kW space: 2350 x 2100 x 2500 mm weight: 3800 kg
STANKOIMPORT 5822M thread grinding machine was manufactured in the USSR. The machine is used for the process of grinding threads to give them the correct dimensions and roughness. During this process, a grinding wheel with a diameter of 400 mm is used to remove a small allowance from the workpiece, forming the thread shape on it. The grinding machine processes threads with a maximum diameter of 200 mm, a length of 500 mm and a weight of up to 30 kg. Depending on the choiceed disc, the diameter of the workpiece can be from 3 to 150 mm (grinding with a single-coil disc) or from 10 to 120 mm (grinding with a multi-coil disc). The total weight of the grinding machine is approximately 5 tons. Technical data of the STANKOIMPORT 5822M thread grinding machine - maximum workpiece diameter: 200 mm - diameter of the workpiece grinded with single-coil disc: 3-150 mm - diameter of the workpi ...
EASY USE - The ergonomically designed drawbar in conjunction with the hydraulic lift creates a user-friendly operation that protects the operator from physical exertion. STRONG LOAD CAPACITY - The pallet truck can easily handle heavy loads can lift and lower up to 2500 kg / 2.5t, making it perfect for daily use. EXACT WEIGHING - The weighing pallet truck with digital scale calculates precisely with a deviation of 0.05% for simple weighing processes and weight checks in shipping or goods receipt. STAINLESS STEEL - Suitable for use in the food sector and for working with corrosive media and is easy to clean thanks to the smooth surfaces. LONG-LASTING USE - Due to its robust and reliable construction made of stainless steel, the Weighing pallet trucks proven in daily continuous use. Wear parts can be reordered from us!
Electric chain hoist steel R 6 Year of construction 1977 Pulling power 300 kg Weight approx. 70 kg L x W x H: 30 x 30 x 50 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
P57 - used appr. 3 m³ / 3,000 litres polyester tank / GRP tank, Staffelstein tank, aboveground, vertically standing, good condition. capacity: appr. 3 m³ / 3,000 litres material: polyester / GRP height: 2.40 m width: 1.04 m length: approximately 1.60 m (with lid 1.80 m) Aboveground, vertically standing tank, dome on the front side, several in- and outlets. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as rain collection tank etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write ...
320 pieces Multishuttle Dematic DMS2 STATIC Used goods built in 2019, very good condition, see pictures Load capacity: 31.5kg Load types: plastic containers, cartons, trays, containers How it works: Dematic Multishuttle 2 Overview - YouTube Negotiation price: € 2.900,- net ex stock Negotiation price: 1 piece € 5.900,- net/piece from 5 pieces € 4.900,- net/piece from 10 pieces € 3.900,- net/piece from 50 pieces € 2.900,- net/piece Very few hours of operation! Steel construction, rails, etc. available. Dismantling will take place from April to June 2024. Location: Northern Italy. Viewing possible by appointment. Further information on request. Partial sale possible. Systems are professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Assembly and programming can be carried out by partner companies. EVE ...
Generator of the Jenbacher 312 Newage engineers GmbH 664 kW 800 kVA Can we gladly create an offer of a generator maintenance
Spare parts for table drilling rig SVO / Stankoimport / Gertner, Fuhrmeister & CO Such as. complete drilling spindle SK50 (Please note the attached pdf-file with a drawing of the spindle) Ball roller spindles from the three axes Electric motors, feed motor 3x, main spindle motor complete control Siemens or control cabinet Control panel with digital device Glass mass Removable flat disc diameter 360mm Radial movement of the support of the flat disc 100mm Transformer / Transformer Angular drill head Sub-apparatus Spindle diameter 110 mm Tool holder ISO 50 Technical data of the original machine Travel laengs approx. 1,000 mm Cross-travel approx. 1,600 mm Vertical travel 1,000mm Laeng movement of the extendable spindle 710mm Speed range 10-1.250 rpm Main engine 11kw Speeds 10 - 1,250 rpm in 22 gear stages Extensive machine documentation including user manual ...
We offer Kaeser compressed air system consisting of 2x adsorption dryer DC 75E, compressed air tank 3000 l, piping with ultrafilter, compressed air management system Sigma, oil-water separation system & control cabinet The compressed air system was used to supply compressed air to a production hall. It was built or extended from 1995-2016 and is fully functional, in good condition and is offered for sale by our customer due to the restructuring of the use of the hall. The screw adapter is sold. 1. Screw compressor Kaeser CS 121 75 kW 2, 2x Adsorption Dryer Kaeser DC 75 E Bj. 2016 6-16 bar 3. Compressed air tank flamco STAG 3000 l 16 bar Bj 1995 704 kg 4.Piping with ultrafilter SG 0192, 5,Control system: SIGMA Air Manager Basic 6.Oil-water separation system Kaeser 7.Control cabinet standard Rittal PS 4884 Technical data on the components To 1 photo 1-2 Screw compr ...
High-temperature oven with a maximum working temperature of 1,800C and lowerable/swivel bottom. All sides of the furnace chamber are heated with Kanthal super elements (= MoSi2). Temperature homogeneity is achieved by downward removable U-elements. Operation with 3 transformers and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). The oven is practically unused (only about 50 fires).
A Linde E16L forklift truck with only 165 operating hours is being sold. The truck is fully functional and ready for immediate use. The forklift currently has a Kaup pallet turner installed. It can also be purchased without a turner. Specifications: Class 386 170 operating hours HF Onboard Charger 48V, 120 Ah 48 volts, 750 Ah battery Duplex Lift Mast: 3145/2121/1518mm Fork carriage 980mm wide, 6 castors Overhead Guard Comfort 2050mm Tyres Superelastik Lighting on the front and back Pallet reversible clamp brand Kaup Type: 1.5T 49lW with sideshift Width 970mm Isoclass 2 incl. solenoid valve 48Volt Opening/roller range 540 - 1,720mm
Gritter Küpper Weisser STA 95 W20 B, attachment device for Unimog, truck etc. driven by B & S petrol engine. Content 2.0 m. equipment: without plan retractable roof. Weight 800 kg. Not functional, corrosion, engine goes on strike - unaudited. With controller and documentary. More spreaders and winter maintenance technology stock! -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...
Size max 320 x 250 mm min 160 x 120 mm Pile height 50 mm Infeed height max 850 mm min 350 mm Speed max 50-100 m/min ; working condition
; Power [PS]: 54; Gross weight [kg]: 889; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach, Caterpillar DE50GC Generator Set specifically designed for stand-by duty.; Water Tank Volume [l]: 103
Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment o flat pile feeder 1st folding unit: o 4 buckle plates o Festa foldingrolleradjustment o noise prevention ; working condition
; Gross weight [kg]: 4832; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 910
; Gross weight [kg]: 5300; Engine: Volvo TWD1683GE-SV; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 985
; Gross weight [kg]: 5370; Engine: Volvo TAD1381GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 534
maximum number of results exceeded
please refine your search
