sta used for sale

Key data: 7 KW

A total of 6 starters for sale by Bosch for Liebherr Gasmotoren 1021 8368. Technical details: Volts: 24 volts Power: 7.8 KW Number of teeth: 11 Hole attachment: 3 Direction of rotation: right Riginal numbers are for comparison purposes only: Starter Bosch 0001330013 Starter Bosch 0001330069 Starter Bosch 0001330070 Starter Bosch 0001383037 Starter Bosch 1986S10003 Starter Bosch 1986S10004 Starter Liebherr 10218368 Starter Liebherr 11386646 Shipping: DHL, DHL Express, freight forwarding. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express route as quickly as possible. This minimizes downtimes. Our dedicated sales department with decades o ...

- Material: AISI 316 stainless steel - Standing on feet - Tanks, above, adapted to the cellar vault Dimensions : - Width: approx. 1150 mm - Depth: approx. 1800 mm - Total height at rear: 2500 mm - Total height at front: 3650 mm (including dome) - Ground clearance: 340 mm Equipment: - Rectangular door 320 x 420 mm - Total drain: flap valve DN 40, Friedrich no 2 - Residual drain: flap valve DN 40, Friedrich no. 2 - Taster - Level indicator - Dome DN 200

Jungheinrich charging station for industrial trucks Industrial Charging Station, Battery Maintenance Stand If you use electric industrial trucks in your business, they rely on accumulators or batteries as an energy source. With the installation of a battery charging station, you benefit from a compact solution that significantly simplifies the charging of batteries. The system serves as a charging station for industrial trucks (such as forklifts). It has three charging stations with Tecna spring balancers that hold the charging cables in place. Construction: The yellow steel structure includes a metal frame with integrated ram protection on the ground to protect the system from damage by vehicles. Spring balancers are mounted at the top, which enable ergonomic handling of heavy cables. Jungheinrich battery charging station for ground mounting Length: 4.15 m Width:  ...

Jungheinrich charging station for industrial trucks 2 x charging station, maintenance stand for battery maintenance If you use electric industrial trucks in your business, they rely on accumulators or batteries as an energy source. With the installation of a battery charging station, you benefit from a compact solution that significantly simplifies the charging of batteries. The system serves as a charging station for industrial trucks (such as forklifts). It has two charging bays with Tecna spring balancers that hold the charging cables in place. Construction: The yellow steel structure includes a metal frame with integrated ram protection on the ground to protect the system from damage by vehicles. Spring balancers are mounted at the top, which enable ergonomic handling of heavy cables. Jungheinrich battery charging station for ground mounting Year of manufacture: ...

Intergas dosing unit DSD 500, type A, foaming unit and gas dosing station At the moment we have an intergas dosing unit for sale. This was a part of a project. Therefore the machine was used only very limited. - Operating hours: well below 100h - Weight: approx. 500kg Find more here - .ucymachines/

Jungheinrich charging station for industrial trucks 4 x charging station, maintenance stand for battery maintenance If you use electric industrial trucks in your business, they rely on accumulators or batteries as an energy source. With the installation of a battery charging station, you benefit from a compact solution that significantly simplifies the charging of batteries. The system serves as a charging station for industrial trucks (such as forklifts). It has four charging stations with Tecna spring balancers that hold the charging cables in place. Construction: The yellow steel structure includes a metal frame with integrated ram protection on the ground to protect the system from damage by vehicles. Spring balancers are mounted at the top, which enable ergonomic handling of heavy cables. Jungheinrich battery charging station for ground mounting Year of manufac ...

Repacking station for big bags or open bags. Including feed hopper with vibrating function, folding box and screw conveyor Availability: immediately Condition: in working order, well-maintained

IGM-Welding-Station IGM Robot Designation: Rti 330 Year of construction: 2005 1st welding unit Manufacturer: Fronius Hoist no.: 4,0750,100 Designation: Transpuls Synergie 4000 2nd welding unit Manufacturer: Fronius Hoist no.: : 4,075,097,R Designation: Transpuls Synergie 4000 Extraction system Manufacturer: Füchtenkötter Designation: FKPF 64/4 V Year of construction: 2005 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Meinert, Type: ApstapelanlageMeinert P420-Y/Z-SCH, Year: 2005, Control: 3 Tec, Program: yes, Stacking device: yes, Work piece length max mm: 5200 X 1200, Work piece length min mm: 500 X 5200, Work piece width max mm: 1200, Stack height in mm: ca.1500, Number of stacks: 14, Stack upper edge mm: 1500, Workpiece weight/stack position in kg: ca.120, Start of stack in mm: Boden, Number of sucking lines: 2, Feeding speed max m/min: ca.60, Year :2005

We sell here 3 starters of the brand Bosch for e.g. Liebherr G944. The starters are new. If you have any questions, please contact us. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on ov ...

Bobst Cube / monitor with control unit for transfer station, Bobst Alpina 110 II matic. Used and tested. Bobst cube / monitor with control unit for transfer station, Bobst Alpina 100 II matic. Used and tested. BSA07320000TG / H12P+P50S1

Manufacturer: Bargstedt Aufstapelanlage, Type: TBH 500 , Year: 2005, Control: Bargstedt, Program: yes, Stacking device: yes, Work piece length max mm: 3000, Work piece length min mm: 280, Work piece width min-max mm: 250-1200, Min.-max. workpiece height in mm: 12-60, Stack height in mm: 1600, Number of stacks: 2, Workpiece weight/stack position in kg: 60, Outlet roller conveyor mm: yes, Cycles approx.: 15, Year :2005

Manufacturer: Bürkle , Type: S80 2200x1250, Year: 1985, Stages: 3, Lateral press: yes, Dimensions of heating plate approx. mm: 2200 X 1200, Number of storeys: 3, Cylinder stroke: ca.500, Charging side: quer, Landing opening mm: ca.150, Steel heating plates: yes, Heated by: Warmwasser, Rückzylinder N/cm2: ca. 4, Number of pressing cylinders: 4, Longitudinal through running press: 2200, Time switch: 1200, Year :1985

Directly from the manufacturer, the original from Apfel GmbH. Fully assembled included 2 shelves KRB 4700 1 storage box KEN 6422 (No. 62) 2 storage bins KEN 4322 (No. 42) 1 zinc sheet trash can 2 brooms 1 hand brush 1 dustpan 1 set of shadowboards 1 compartment for cleaning products 4 swivel castors with parking brake Payload: 400 kg Dimensions: 512 w x 1,952 h x 772 d Structure powder-coated in black-grey RAL 7021 (carcass) Various designs and special solutions possible, we as a manufacturer support you in your wishes! (See pictures 3+4)

Manufacturer: VEN DRY COLLECT 10-ETAGEN TROCKNER, Year: 2014, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 4.700, Min.-max. workpiece height in mm: 150, Number of pallets: 10, Working widht mm: 1.300, Conveyor lenght mm: 10 X 4.700, Feedin speed m/min: 3 - 15, Conveyor/Conveyor belt: Band, Heating register qty: 1, Fresh air m³/h: 2.500, Damper register - items: 1, Fresh air m³/h: 2.500, FREE TEXT: Temperatur 15-50 Grad inkl.Heizregister, Year :2014

Load carriers Packaging materials Frame Reusable ________________________________________ Feature Value Material Plastic Surface/Color: Black Dangerous Goods - ESD - Removal side over 2 long sides Content variable ________________________________________ Dimensions Parameters Indoor Exterior Length (mm) 1,060 1,140 Width (mm) 515 595 Height (mm) 443 635 Volume (m³) 0.242 0.431 Dimensions Folded • Height (mm): 276 • Volume (m³): 0.187 ________________________________________ • Immersion depth (mm): 20 • Free underride height (mm): 100 • Tare Weight (kg): 24,000 • Permissible Payload (kg): 177,000 • Permissible gross vehicle weight (kg): 201,000 • Permissible load (kg): 2,000,000 ________________________________________

Specifications: Lifting capacity: 100 tons 1-side driven Smallest diameter: 480 mm Largest diameter: 4800 mm Diameter rollers: 700 mm Motor power: 2 x 0.75 kW Rotation speed infinitely variable Side rollers for moving on rails Dimensions (length x width x height): approx. 3900 x 1300 x 1300 mm Weight: approx. 7 tons The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Packaging materials Frame Reusable ________________________________________ Feature Value Material Plastic Surface/Color: Black Dangerous Goods - ESD - Removal side over 2 long sides Content variable ________________________________________ Dimensions Parameters Indoor Exterior Length (mm) 1,060 1,140 Width (mm) 515 595 Height (mm) 443 635 Volume (m³) 0.242 0.431 Dimensions Folded • Height (mm): 276 • Volume (m³): 0.187 • Immersion depth (mm): 20 • Free underride height (mm): 100 • Tare Weight (kg): 24,000 • Permissible Payload (kg): 177,000 • Permissible gross vehicle weight (kg): 201,000 • Permissible load (kg): 2,000,000 ________________________________________

Manufacturer: Homag Fräsständer Bündigfräsaggregat, Spare part from machine: KF Maschine, for right machine side: rechts, Number of motors: 2, kW-Leistung : 1,1, Drehzahlen U/min : 18000, Siko Anzeige : yes, Horizontal Rollentastung : yes, Vertical roller sensing: yes, Pneumatically controlled: no, kW-output 2: 1,1/300,

Manufacturer: Biesse Längs auf Quer, Type: RBO GP 90, Year: 1996, Angular transfer: yes, Turning station: yes, Working length max mm: 3000, Working lenght min mm: 250, Working widht max mm: 1300, Feeding speed max m/min: 50, Feeding speed min m/min: 10, Feeding speed continous adjustable: yes, Headroom adjustable: yes, Roller width in mm: ca.3000, roller diameter mm: 80, Recharging length mm: ca.6000, Working hight mm: 950, Engine power kW: 2,5, Wight approx. kg: 950, Year :1996

Packaging materials Frame Reusable stackable ________________________________________ Feature Value Material Plastic Surface/Color: Black Dangerous Goods - ESD - Removal side over 2 long sides Content variable ________________________________________ Dimensions Parameters Indoor Exterior Length (mm) 1,080 1,190 Width (mm) 1,030 1,140 Height (mm) 443 635 Volume (m³) 0.493 0.861 Dimensions Folded • Height (mm): 276 • Volume (m³): 0.374 • Immersion depth (mm): 20 • Free underride height (mm): 100 • Tare weight (kg): 44,200 • Permissible payload (kg): 500,000 • Permissible gross vehicle weight (kg): 544,200 • Permissible load (kg): 2,000,000 ________________________________________

Standing stainless steel tank, with feet Volume: 1.5 m³ Dimensions: Ø 1.10 m × 2.10 m total height incl. feet Feet 30 cm, dome top Spout under the tank with flange Ø 4.5 cm Spout at the bottom Ø 6.5 cm, without tap Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Standing stainless steel tank, with feet Volume: 1.5 m³ Dimensions: Ø 1.10 m × 2.10 m total height incl. feet Feet 30 cm, dome top Spout under the tank with flange Ø 4.5 cm Spout at the bottom Ø 6.5 cm, without tap Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

horizontal stainless steel tank, double-walled, insulated, with feet Volume: 1.6 m³ Dimensions: Ø 1.20 m × 2.06 m long, total height with feet 1.80 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Manufacturer: Biesse, Type: RBO GP 90, Year: 2002, Angular transfer: yes, Working length max mm: 3000, Working lenght min mm: 2800, Working widht max mm: 1300, Feeding speed max m/min: 10-50, Feeding speed continous adjustable: yes, Headroom adjustable: yes, Roller width in mm: 3000/1300, roller diameter mm: 80, Engine power kW: 3,55, Wight approx. kg: 800, Year :2002

Standstill monitor, standstill monitor, underspeed monitor, standstill monitoring, safety relay -Manufacturer: ifm, Standstill monitoring safety relay A 300 -Type: AZ 33-B DA0001 230V AC -Price: per piece -Quantity: 2 available -Dimensions: 75/55/H110 mm -Weight: 0.4 kg/pc.

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes -Screw stand: 1 piece -Minimum height: 140 mm -Max. height: 225 mm -Dimensions: Ø 80 x 140 mm -Weight: 4.4 kg

100,000 litre, Stock number: T4044, Litre: 100000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Tank, Standing: For foundation, Top: Conical, Bottom: Flat sloping, Tank cover: In the side, CIP: Yes, TJ SaniMega, Working temperature: 0 - +50° C, Density: 1.0, Working pressure: None, Inner diameter: Ø 3500 mm, Total height: H 11200 mm, Other: Airing cap Ø 500 mm, Condition: The tanks have never been used

horizontal stainless steel tank, double-walled, insulated, with feet Volume: 1.6 m³ Dimensions: Ø 1.20 m × 2.06 m long, total height with feet 1.80 m Call us or write to us! We would be happy to make you a non-binding offer! Scholten Tanks GmbH Brüsseler Str. 1 48455 Bad Bentheim/Gildehaus Phone: 05924 255 485

Manufacturer: Biesse Quer auf Längs, Type: RBO GP S 88, Year: 1998, Angular transfer: yes, Turning station: yes, Working length max mm: 3000, Working lenght min mm: 250, Working widht max mm: 1300, Feeding speed max m/min: 10, Feeding speed min m/min: 50, Feeding speed continous adjustable: yes, Headroom adjustable: yes, Roller width in mm: 3000, roller diameter mm: 80, Recharging length mm: ca.6000, Engine power kW: 3, Wight approx. kg: 950, FREE TEXT: Rechtsmaschine Anschlaglineal Rechts, Year :1998

Keeldiepte: 405 mm slag: 21 mm 55 slagen per minuut Punching pressure: 45 ton Max punching dia: Ø 27 in 13 mm / Ø 39 in 9 mm Power needed: 2,2 kW Length: 1300 mm Depth: 800 mm Height: 2050 mm Weight: 1000 kg

Industrial Processing Tank – 19,517 L Working Capacity (2006) High-capacity industrial processing and storage tank designed for hygienic handling of liquid food products in beverage and dairy processing environments. The tank offers robust construction, high temperature tolerance, and pressure capability suitable for modern production lines. General Information - Year of Manufacture: 2006 - Condition: Used, operated only for a short period Capacity - Working Capacity: 19,517 liters Technical Specifications - Maximum Pressure: 4.0 bar - Maximum Temperature: 145 °C Dimensions - Outside Diameter: 2,570 mm - Total Height: 6,830 mm Key Advantages - Large 19,517 liter working capacity - Suitable for high-temperature processing applications - Designed for pressure-resistant operation up to 4.0 bar - Ideal for dairy, beverage, and liquid food processing - Robust  ...

Manufacturer: Biesse Drehstation läng auf Quer, Type: RBO GP 90, Year: 1998, Angular transfer: yes, Turning station: yes, Working length max mm: 3000, Working lenght min mm: 250, Working widht max mm: 1300, Feeding speed max m/min: 50, Feeding speed min m/min: 10, Feeding speed continous adjustable: yes, Headroom adjustable: yes, Roller width in mm: 3000, roller diameter mm: 80, Recharging length mm: ca.6000, Working hight mm: 950, Engine power kW: 3, Wight approx. kg: 950, FREE TEXT: Ausrichtlineal querübergabe, Year :1998

Manufacturer: Homag , for left machine side: yes, for right machine side: yes, Number of motors: 2, Motor : Perske, kW-Leistung : 1-1,5, Volt/Hz : 220-380/50-100, Drehzahlen U/min : 2670/5710, Siko Anzeige : yes, Horizontal Rollentastung : no, Pneumatically controlled: no, Shaft dimensions L x D mm: 30, Slewable vertically: yes, Motor 2: Perske, kW-output 2: 1,5, Volt/Hz 2: 220-380/50-100, Speed rpm 2: 2670/5710, Silo indication 2: yes,

Manufacturer: Homag , Type: TD 12 / 25, Year: ca 1995, Turning station: yes, Working length max mm: 2800, Working widht max mm: 1300, Feeding speed max m/min: 30, Feeding speed min m/min: 10, Feeding speed continous adjustable: yes, Headroom adjustable: yes, roller diameter mm: 80, Working hight mm: +/- 900, Engine power kW: 6, Year :ca 1995

Manufacturer: Ligmatech, Type: Profi TD/31/25/12, Year: ca.2004, Control: Siemens, Turning device: wendevorrichtung, Working length max mm: 2800, Working widht max mm: 1300, Feeding speed max m/min: 10-30, Feeding speed continous adjustable: yes, Headroom adjustable: yes, roller diameter mm: 80, Working hight mm: +-900, Engine power kW: 6, Dimensions L x W x H mm: 6200 x 2800, FREE TEXT: Fahrbar Rolle, Year :ca.2004

Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press, quick-change punch holder -Stamp holder: Stamp holder -Hole: Ø 30 mm -Hole spacing: 94x63 mm / Ø13 mm, see photos -Dimensions: 120/90/H135 mm -Weight: 4.2 kg

Key data: 3600 KW, 4600 kVA, 6600 V

We offer a MWM CHP Type: TBG 632 V16 for sale Specifications: Engine: MWM Type: TBG 632 V16 Power: 3600 kW Generator: AVK Power: 4600 KVA Voltage: 6600 V Running hours: 47,000 h Weight: 46,000 kg Scope of delivery: motor plus generator on base frame

Manufacturer: Homag Eckenkopiergerät FK 03, Ersatzteil aus Maschine: Homag KF , für Maschinenseite links: yes, für Maschinenseite rechts: yes, Motorenanzahl: 12000, kW-Leistung : 0,55, Volt/Hz : 380/200, Horizontal Rollentastung : yes, Vertikale Rollentastung: yes, pneumatisch ansteuerbar: yes, pneumatisch gesteuert : yes, FREE TEXT: zum Bearbeiten der Kantenüberstände an der Werkstückober- und unterkante sowie zum Umfräsen der Werkstückvorder- und hinterkante,

Manufacturer: IMA, Ersatzteil aus Maschine: IMA Combima, für Maschinenseite links: yes, Motorenanzahl: 2, Motor : yes, kW-Leistung : 0,5, Drehzahlen U/min : 18000, Wellenmasse L x D mm: yes, Revolver Verstellung: yes, kW-Leistung : 0,5, Drehzahlen U/min : 18000, Wellenmasse L x D mm: yes, kW-Leistung : 0,5, Drehzahlen U/min : 18000, Wellenmasse L x D mm: yes, kW-Leistung : 0,5, Drehzahlen U/min : 18000, Wellenmasse L x D mm: yes, kW-Leistung : 0,5, Drehzahlen U/min : 18000, Manufacturer: IMA,

Capacity: 3,224 kW Volts: 400 HZ: 50 Condition: Very Good Scope of Supply: Complete Turbine Power Station with turbine and alternator, Control Panel, Condensor, Cooling Towers, Spilling Unit, Switchgear, Synchronisation panel, Transformer, Piping / wiring / pumps. Total cost for power plant components was around 3 million on the actual power plant components. Nominal Steam requirement to run the turbine is 17, 5 t/h at 29 barg & 350 °C. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.

Rema DP 30 Double Polishing and Grinding Machine Polishing block with integrated suction and pole-switchable motor for 2 speeds. Double grinding machine for demanding Polishing, grinding and brushing applications in continuous industrial use. Manufacturer: REMA - Reichmann & Sohn GmbH Quality and precision "Made in Germany", Speed: 1450 / 2900 rpm (2 switchable stages) Motor power: 1.5 kW / 2.2 kW (2.0 / 3.0 hp) Shaft diameter: ø 25 mm Max. clamping width 50 mm Recommended disc Ø 300-400 mm Shaft ends: M10 female thread (for attaching polishing tips / polishing mandrels). Supply voltage: 400 V Dimensions (WxDxH) approx. 1090 x 560 x 1060 (1350) mm. Areas of application & details: Two mounting options for grinding, polishing and cutting wheels, polishing rings, round brush, buffing wheel and more. The polishing machine has a removable drip pan / water pan, which in t ...

Manufacturer: MBusch, Type: MB LA 500, Year: ca.1997, Working widht mm: 600, Working hight mm: 80, Workstations: 4, Glue jets: 4, Schlitz und Zapfenbeleimung: yes, Pneumatical work piece clamping: yes, Fusspedal Takt: yes, Wasseranschluss zum reinigen: yes, Leimpumpe: yes, Movable: yes, Automatical glue supply: yes, Compressed air bar: 6, Year :ca.1997

Stainless steel batch mixer with a gross volume of 600 l. (max. usable capacity: approx. 400 l.), centrifugal unit equipped with ploughshares, drive via geared motor with 11.0 kW, outlet flap pneumatically operated, without control cabinet. In very good condition of wear.

CONCRETE – STAIR FORMWORK FOR SPIRAL STAIRS LEFT & RIGHT ROTATION Pitch 17-19 cm infinitely adjustable Manufacturer: HOVAL Type: Alphatop Little used – as good as new Minimal changeover times. This makes daily concreting possible. The information is non-binding, prior sale is reserved.

wheel diameter: 150 - 500 mm total power requirement: 3 kW weight of the machine ca.: 350 kg dimensions of the machine ca.: 2,4 0,6 1,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ALMAB stacking line from a planing line 200m/mim for planers / boards 6m Dujbm Ejv T Nblepdgyer Manufacturer: ALMAB Sweden Year of construction 2002 Speed for a feed of 200m / min ! Fully functional For max packages: 1.6m x 2.4m Length approx. 5.3m Height approx. 2.8m 6 lifting arms 1.60m long ( not mounted on the photo ) Width of the cross transport: approx. 2.4m Cross transport Electric lift table Weight 6.0 t

Self adhesive labeler 2 stations farmat 46mm diam