sta used for sale

SP-1 Stapler with Single Stitching Head

Pfeiffer Vacuum Hicube 300 brand new, in stock. 12 months warranty.

Key data: 68 KW, 85 kVA, 400 V

PTO generator 85 kVA for field operation, optionally also for yard operation Aggregate type: transportable Design: Weatherproof IP 44 PTO : 540 Technical Data Generator: Generator manufacturer: WA Generator type: WA-ZB 85/4 Gene. No.: on request Generator power: 85 kVA Dimensions of the unit: Width approx. mm: 800 Height approx. mm: 923 Length approx. mm: 1,204 Weight approx. KG: 386 Scope of delivery: PTO generator for field operation, optionally also for yard operation, building seizing with 1H socket according to VDE 0100-551 with synchronous three-phase generator, incl. electronic voltage regulator AVR in protection class IP 44 (splash-proof) Gearbox for 540 PTO Tractor power / min. KW 125 Tractor power / min. hp 170 PTO speed / rpm 400 Generator speed / rpm 1,500 Required PTO / NM 2.671 Sockets / Mennekes / PCE  ...

echnical characteristics Nominal force, mc 1600 Not reach the slide to BDC, mm 12 Progress in the slide, mm 400 The frequency of continuous strokes, min-1 16 The highest frequency of single strokes, min-1 12 Closed height mm 870 Adjusting the closed height 220 mm Size slider, mm left to right 1600 front to back 1600 Dimensions plate, mm left to right 1600 front to back 1600 Power of main drive, kW 110 Dimensions, mm left to right 4670 aft 4670 height above floor level 8110 W 154 000kg

Stainless steel, work table -stable execution -Dimensions: 898/598/H870 mm -Weight: 12 kg

Key data: 537 , 400

Pro2 container unit with 537kW el. Performance as a pure power generator incl. heat recovery system - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TCG2016V12 - 537kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours about 87,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling wat ...

Pro2 container unit with 311kW el. Performance as a pure power generator - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V8K - 311kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours only about 95,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the co ...

Grafoteam PST 48 Printing Plate Transport Trolley; Condition New; for panel format 811x1200mm; mobile. Plate trolley Grafoteam PST 48; condition new; for plate size 811x1200mm; mobile.

number of stapling heads: 2 voltage: 220 V frequency: 50 Hz dimensions of press (L x W x H): 60 x 70 x 105 cm weight: ca. 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of stapling heads: 2 Dimensions (L/W/H): 40/40/80 mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Starting resistor, series resistor, resistor -for testing large electric motors -Power: 125 A -with control cabinet -3x amps display 250 amps -(technical data see photos) -Dimensions: 720/800/H1000 mm -Weight: 128 kg

Immediately available Elevated main start valve

UPS Effekta Pegasus 200 kVA Uninterruptible power supply 3 phases Batteries were renewed 06/2019 and are tested all still have between 12.9 and 13.0 V and that after 3 months, are stored on a separate pallet the power supply is in 1A condition and does not come from the manufacturing industry 2 months return policy

Stn -; Kuipers Woudsend steriltank. • Holdup volume 3000 litre, bruto 3400 litre • Working pressure -1/5 bar. • Test pressure 7 bar. • Design temperature 0/159°C. • Year of manufacture 2001. • Net weight ±1100 kg • Including complete documentation of tank.

Belt Grinding and Polishing Machine Löser SMG Specifications: • Power 2 x 4 kW • Speeds on both sides 3-stage 1400/1800/2200 rpm • Belt clamping arms for belt lengths up to 3,500 mm • Surface-mounted / free-standing extraction hoods for pane diameters 400 - 600 mm

Bohle stationary column for drums and containers, suitable for feeding tablet presses etc. Maximum weight 600kg.

Key data: 1558 KW, 2300 kVA, 400 V

Engine Make: MWM Engine type: TCG 2020 V16 Power: 1558 kW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2007 Operating hours: 57,000 h Scope of delivery: Motor+generator on base frame, motor control TEM, throttle line, pumps.

horizontal stainless steel tank, can be ordered with 6 brackets Volume; 85 m³ Dimensions: Ø 3.10 × 12.0 m long

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/3F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 2002

upright stainless steel tank with flat bottom Weight: 3 tons Volume: 43.5 m³ Dimensions: Ø 3.10 m × 6.15 m high

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 1995

upright stainless steel tank, flat bottom Volume: 15 m³ Dimensions: Ø 2.60 m × 3.40 m high

V23 - used approx. 28.5 m³ / 28,500 ltr stainless steel tank V4A container tank, insulated, heatable and coolable. technical details: capacity: approx. 28.5 m³ / 28,500 litres material: stainless steel V4A dimensions: approx. Ø 2.50 m × L 9.20 m × H 2.60 m without railing Used V4A stainless steel tank, professionally cleaned and in good condition. Horizontal storage tank, container tank, insulated by approx. 20 cm glass wool / rigid foam, heatable or coolable. With foldable railing, 2x lid on top of the roof, several inlets and outlets. The tank is being sold as shown in the pictures. Can be used as storage tank for many different media such as water, liquid feed, whey, potato steam trays, molasses, manure, leachate, rapeseed oil or as a rainwater collection tank, etc. Price upon request. Transport can be arranged at low cost. It is not possible to update al ...

Dear Ladies and Gentlemen, We now have used transformer stations available Year of construction : 2004 Power : 1000KVA Primary voltage : 20kV Secondary voltage: 400V, Groupset: DYN5 Switchgear: SF6 Station Dimension : Length: 250 cm Width: 240 cm Height: 245 cm Weight: 11 ton At call Nationwide cheap delivery. If you have any further questions, please do not hesitate to contact Mr. Schmidt. Available Monday to Saturday from 8 a.m. to 8 p.m. CLOCK and in case of emergencies 24 hours

Pressure plate stacker Grafoteam PST 26 C; arm length 650mm; suitable for Heidelberg Suprasetter A52-74; optionally with stop interface for Heidelberg Suprasetter A52-74. Plate stacker Grafoteam PST 26 C; arm lenght 650mm; used for Heidelberg Suprasetter A52-74; for option with stop-interface for Heidelberg Suprasetter A52-74.

V22 - used approx. 30 m³ / 30,000 litre V4A stainless steel tank, horizontal tank on pedestals. technical details: capacity: approx. 30 m³ / 30,000 litres material: stainless steel, probably V4A, we can have this tested upon request dimensions: approx. L total 6.50 m / L tank 6.00 m × Ø 2.50 m / H total 3.00 m Used stainless steel tank, professionally cleaned and in good condition. Horizontal storage tank on 2 fixed, welded stainless steel bases, lid on the top of the tank (68 cm) and on the side, several inlets and outlets. On the flanges it reads V4A 1.4571, see picture. This stainless steel tank can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, manure, potato steam trays, leachate, rapeseed oil or as a rainwater collection tank, etc.. Pictures from the inside to follow. Unfortunately there is no type label. Price upo ...

upright stainless steel tank, incl. agitator Volume: 6 m³ Dimensions: Ø 2.24 m × 2.80 m high incl. agitator, cylindrical height 1.54 m

Semiconductor relays, switchgear, switching components, semiconductor contactor -Manufacturer: Mosca, solid state relay AND gate -Type: ME 5499 AND gatter -Dimensions: 55/20/H75 mm -Weight: 0.1 kg

upright stainless steel tank Volume: 6 m³ Dimensions: Ø 2.40 m × 1.90 m high

horizontal stainless steel tank, double-walled, insulated, oval, with feet Volume: 5.2 m³ Dimensions: Ø 2.05 m wide × 2.80 m long x 1.80 m high incl. feet

upright stainless steel tank, incl. agitator Volume: 3.3 m³ Dimensions: Ø 1.66 m × 2.50 m high incl. agitator, cylindrical height 1.54 m

Inrush current limiter, soft starter, soft starter, starting current limiter -Manufacturer: Alfred Imhof, soft starter size D08 -Technical data: see photo identification plate -Number: 2x soft starters available -Price per piece -Dimension: 95/65/H110 mm -Weight: 1.5 kg

upright stainless steel tank, bottom with cone. with feet, pressure tank with cooling zones Volume: 2.7 m³

horizontal stainless steel tank, oval, with feet Volume: 2.3 m³ Dimensions: 0.70 m wide x 2.30 m long x 1.50 m high and 0.20 m high feet, total height 1.70 m

Steel stairs, external stairs, machine stairs, machine ascent, extension stairs -Machine stairs: stable design, as machine access -Material: VA -Step height: approx. 310 mm -Height: upper step approx. 1680 mm -Transportation dimensions.: 1770/535/H190 mm -Weight: 29 kg

Stainless steel pipe bends, welding bends -Stainless steel pipe bend: welding bend 1.4541 W 90° -Size: 168.3 x 2.6 -Quantity: 5 sheets available -Price: per piece -Dimensions: 440/215/H167 mm -Weight: 3.6 kg/piece

horizontal stainless steel tank, double-walled, insulated, with feet Volume: 1.6 m³ Dimensions: Ø 1.20 m × 2.06 m long, total height with feet 1.80 m

Stainless steel tank, upright, cube Volume: 1 m³ Dimensions: 1.0 m wide × 1.2 m long × 1.60 m high

Key data: 3 KW, 4 kVA, 10000 V

Technical data engine: Engine manufacturer: Leitner Engine Type: LTE16V4900 Engine power: 3,280 KW Cooling: Water-cooled Tempering: Electric 24 V DC / 2 x 11 KW Speed: 1500 rpm Fuel: Heating oil EN 590 Technical Data Generator: Generator manufacturer: Mecc Alte Generator Type: ECO47HV-1L/4 Generator power: 3900 kVA Voltage: 10 kV Power factor: cos. - phi 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation / ÜSY Delivery: Built-in Tank: on-site, external Dimensions of the aggregate: Width approx. mm: 2,438 Height approx. mm: 2,700 + silencer Length approx. mm: 12.192 Weight approx. KG: 34,000 Stock number: 1412 Condition: New Year of construction: 2024 Shipping time: 24 KW from AB Hours: New Location: Verl - Germany Scope of delive ...

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, distributor drum, distributor roller -Distribution drum: Material stainless steel -Overall diameter: 290 mm, length 685 mm -Drum diameter: 205 mm -Hole: Ø 30 mm -Dimensions: Ø 290/685 mm -Weight: 10.8 kg

upright stainless steel tank, with feet Volume: 1.5 m³ Dimensions: Ø 1.10 m × 2.10 m total height incl. feet Feet 30 cm, dome top Outlet under the tank with flange Ø 4.5 cm Outlet at the bottom of the floor Ø 6.5 cm, without tap

Pressure vessel, pressure tank, pressure vessel, -Manufacturer: UM Alloy Products, stainless steel compressed air tank -Type: 316L MAWP 9 BAR -Contents: approx. 5 liters -Permissible operating overpressure: 9 bar -Dimensions: Ø 240 x 300 mm -Weight: 5.3 kg

Limitec mobile container tipping and emptying device, for turning and emptying containers with a volume of approx. 70 litres, a diameter of 378 mm and a height of 604 mm, lifting weight max. 80 kg, electr. connection 400V/ 50Hz/ 0.6KW, machine dimensions 1300 x 730 x 1816 mm (L x W x H), machine weight approx. 200 kg.

Good working conditions

Die holder, notching tool, punching tool, punch, punching die, punching die, punching die, round die -Manufacturer: Mubea, punching die round die Ø 75 mm -Type: Mubea 75 1 5 -Total dimensions: Ø 150 x 40 mm -Weight: 3,9 kg

Stainless steel tank, stainless steel tank, separator, filter tank, for plastic injection molding machine -Stainless steel tank: separator -Diameter: see photos -Reservoir: with sight glass -Total dimensions: Ø 248 x 435 mm -Weight: 17kg

Conveyor belt, belt conveyor belt, metal conveyor belt, wire belt, link belt, round wire link belt -Conveyor belt: link belt stainless steel -Width: 1000 mm -Length: 2890 mm -Thickness: 4 mm -Transport dimensions: Ø 122 x 1000 mm -Weight: 32.7 kg

Exhaust pipe, transition piece, exhaust gas exhaust system, exhaust system -Manufacturer: Metaloterm, transition piece without flange for exhaust system ADAS -Type: LOT: PN91564 0914 -Dimensions: see photos -Total dimensions: Ø270 x 290 mm -Weight: 2 kg

Bosch starter motor -Manufacturer: Bosch starter motor 12 V, unfortunately without type designation -Voltage: 12 V -Teeth: 10 -Solenoid coil: Type 0331402502 -Dimensions: see photos -Overall dimensions: 340/180/H115 mm -Weight: 13.8 kg

Dimensions (L,W): , mm Weight: ca. 90 kg adjustable height (yes/no): ja stroke: 300 - 800 mm surface of working table: 1.700 x 1.500 mm table width: max. 3.800 mm 0: ca. 130 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.