sta used for sale

3-stage evaporator made by Manzini. Juice flow rate: 5000 L/h Ira 7 aroma catcher, juice flow rate: 7000 L/h Manufacturer: Manzini New: 1979 Type: 3-stage falling film Aroma recovery: none Evaporation capacity: approx. 6 t H₂O/h Steam consumption: approx. 2.8 t/h Specific steam loss: approx. 0.43 kg/kg of evaporated water Electrical power consumption: approx. 80 kW Operating power: approx. 120 kW

Manufacturer: Star Model No.: ECAS 20T Year: 2008 Condition: Used Stock number: 9553 Control system: Siemens Sinumerik Operating hours: 6000 h Maximum spindle speed: 10000 1/min Max. rod diameter: 20 mm Length: 2588 mm Width: 1150 mm Height: 1765 mm Weight: 3500 kg

cutting length: 5300mm; cutting height: 2100mm; cutting depht: 80mm; scoring unit: no; feed: manuell; read out horicontal cut: Scala; read out vertical cut: Scala; sawblade diameter: 300mm; movable material support: ja; Sawblade speed: ca. 4000 U/min; motor power: 4 kW; machine length: 6500mm; machine depth: 1500mm; machine height: 2800 mm; weight: 800kg;

sliding table length: 3000 mm; cutting width at the fence: 1000 mm; cutting width at the cross cut: 3200 mm; cutting depth: scoring unit: ja; height adjustment sawblade: manuell / Kurbel; tilting adjustment sawblade: manuell / Kurbel; adjustment fence: manuell; readout sawblade tilting: Digital; read out sawblade height: -; read out fence: Scala; read out crosscut: Scala; sawbladediameter: 450 mm; number of speeds: 4000 U/min; motor power: 4 kW; motor brake: ja - automatisch; suction connection: 80 mm und 120 mm; machine length: 3000 mm; machine width: 2100 mm; weight: ca. 1100 kg;

Used sanitary airlock made by ITEC Star Clean type 23891. New 2013. Technical specifications: Power supply: 400 V, 50 Hz, 1 kW, Overall dimensions: 2820 mm x 1640 mm x 1545 mm. 4 units available, one manufactured in 2007.

Width 56 cm Year of construction 2017 Inclined roller table for alignment Height adjustable H version with round plug Delivery date: Immediately

From a current recycling we offer you combine harvesters + header + cutterbar wagons. Year of manufacture 2021 (registration date 25.03.2024) + 2023 (header + cutterbar car) Condition: good / very well maintained EUR 210.000,00 VHB Hours: 722.62 Engine / 417.98 Threshing Hours Asset Manager: Monika Stüker Phone: +49 (0) 172 2796951 Mail: m.stuekerakf.de We will be happy to provide you with details upon request. Location: 77815 Bühl The sale is without warranty Subject to prior sale

Serial Number Crane 26376/99 Load Capacity Main Hoist: 40,000 kg Auxiliary Hoist: 10,000 kg Dimensions Span: 23,410 mm Main Hoist Hook Path: 12,000 mm Auxiliary Hoist Hook Path: 10,000 mm Crane Dead Weight: approx. 22,500 kg Crane Design: Double-Girder Bridge Crane Hoist Class: HC3 Classification: H2 / B3 according to DIN 15018 Drive Group: 1Am (FEM) Control: Control switch on the trolley (floor operation) Overload Protection Available Electric Crane Travel Drive Electric Trolley Travel Drive Hoist 1 (Main Hoist) Type: AS 7100-16 4/1 L2 Serial Number: 5700916 Load Capacity: 40,000 kg Lifting Speed: 4.0 / 0.40 m/min Motor Power: 30.0 kW Hook Path: 12,000 mm Rope Length: 57.7 m Drive Group: 1Am Hoist 2 (Auxiliary Hoist) Type: SH 5025-20 4/1 L3 Serial Number: 3201603 Load Capacity: 10,000 kg Lifting Speed: 5.0 / 0.80 m/min Motor Power: 9.5 kW Hook Path: 10,0 ...

5-axis machining center Hedelius ACURA 65 incl. standby magazine Control: TNC 640 Year of Make: 2017 Internal machine no. 80 Travels: X-axis: 700 mm Y-axis H / V: 650 / 465 mm Z-axis: 600 mm Swivel table: Ø 650 x 540 mm Swivel range: +30° to -115° Table load: 500 kg Mount: DIN 69871 AD 40 Tool magazine: 65 – compartment Spindle speed: 50 - 14,000 rpm Accessories Standby magazine 180 seats Inclined bed coolant system SKM 900 Chip conveyor LTA Suction 3D Probe Rinsing gun KinematicOpt

Type: EL-B 160-17,275 E Year of Manufacture: 1999 Crane Serial Number: 26365/99 Load Capacity: 16,000 kg Span: 17,275 mm Crane Weight: approx. 7,018 kg Crane Classification: H2/B3 according to DIN 15018 Drive Group: 1Am (FEM 9.511) Hoist: R. STAHL AS 5040-10 4/1 Hoist Serial Number: 5512634 Lifting Speed: 2.5 m/min Crane Travel Speed: 10 / 40 m/min Drive Power: 2 × 0.46 / 2.0 kW Duty Cycle: 20 / 40 % ED Operating Voltage: 400 V / 50 Hz Control Voltage: 230 V Protection Class: IP54 Operation: Floor operation (control switch on the trolley) Overload Protection: Yes

Crane Serial Number: 26364/99 Main Hoist: 16,000 kg Dimensions Span: 11,825 mm Dead Weight: approx. 4,888 kg Wheel Load: min. 15.878 kN max. 88.563 kN Crane Design: Single-girder overhead crane Lifting Class: HC3 Crane Classification: H2 / B3 according to DIN 15018 Drive Group: 1Am (FEM 9.511) Operation: Control switch on the trolley (floor operation) Crane Drive: electric Trolley Drive: electric Hoist Manufacturer: R. STAHL Type: AS 5040-10 4/1 Serial Number: 5512624 Load Capacity: 16 t Lifting Speed: 2.5 m/min Travel Gear Crane Travel Speed: 10 / 40 m/min Electrical Data Operating Voltage: 400 V / 50 Hz Control Voltage: 230 V Protection Class: IP54 Motor Power Travel Gear: 2 × 0.46 / 2.0 kW

Width 66 cm Built in 1999 Pallet feeder with suction head Tremat Sheet Separation System 1st station: 6 fold pockets 66 cm Upstream knife shaft Downstream knife shaft Gluing device HHS for cold glue 2nd station: 6 fold pockets Downstream knife shaft 3rd station: 4 fold pockets Downstream knife shaft Standing sheet delivery SBP 46 Delivery date: Immediately

Key data: 940 KW, 1175 kVA, 415 V

STAMFORD PE734A2 Generator – 1175 kVA / 940 kW Used STAMFORD AC generator, model PE734A2, previously operated with an MTU 4000 series engine. Specifications: 1175 kVA, 940 kW, 415 V, 50 Hz, 1500 rpm, 3-phase. Operating hours: approx. 27,000 hours. Used condition, as shown in the photos.

General SKU306Y630 MakeHiWay Serial24-395-01 Main Features Motor1.5 KW Length5000 mm Inlet diameter72 mm Specified Features - Vertical screw conveyor Tube-modelø 72 mm With hopperdosing screw Inletø 250 mm Motor1,5 kW (400 V, 2950 rpm) Screw speed± 300 rpm Outlet height5 m Conveying height5,3 m MaterialStainless steel 1.4301 (304) General Year of construction2024 Mounted in framecheck LocationBarneveld Floorspace1,5 x 1,5 m Total height5,5 m Weight2000 kg CEcheck Extra information Extra SpecificationsIncluded: Big-bag unloading station with - steel frame - chain hoist - product receiver with dosing screw Powdered foodsStarchRubberAgrochemicalsCatalysts & fillersPaper & otherOrganicsSugarAnimal feedVertical screw conveyorsPlastic & rubberMinerals & inorganicHiWayIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > StarchIndustries > Chemical >  ...

General SKU331Y746 LocationBarneveld CEcheck MakeLescaut Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume245 Ltr. Motor1.8 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity170 l (245 l bruto) Vessel sizesDia. 800x900 mm Dished bottomcheck ManholeCover Top connectionscheck Outletwith valve With jacketcheck Max. temperature-20°C/+200°C With propellor stirrercheck Motor1,8 kW (400 V, 1440 rpm, (Ex)) Speed mixing shaft208 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) General TypeRecipient No.23236 Year of construction2003 With switchgearcheck Floorspace0,90 x 0,90 m Total height2,40 m Weight700 kgPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRub ...

OKUMA TwinStar LT200-M - CNC lathe - Year of construction 2006 - Immediately available

Doses product into trays under a weigher, The JASA filling station from 2015 sits under a weigher and catches the weighed portions in a hopper. Two flaps drop the product into the tray below, so you can fill trays of vegetables, fruit or salads neatly and without spillage., The station stands on a mobile stainless frame and has its own control box with on/off and two adjustable fill times. It runs on 230 V., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/jasa-tray-filling-station/, Type: Tray filling station, Filling: Hopper with two flaps, Controls: On/off and two adjustable fill times, Electrical: 230 V, Construction: Stainless frame on castors

Single folding machine Heidelberg Postpress, type RFH-82, built in 2005, Delivery and banding machine system, Fabr. Palamides, type Delta 703 Destacker Heidelberg Stahlfolder, Station PD-94-T Pressing and banding delivery Palamides Delta 1005 Folding machine Heidelberg, product 2TD-94, year 2006, 10 bags, Product PD-94, year 2006, Pressing and banding delivery Palamides Delta 1005, built in 2007 Folding machine Heidelberg, product 2TD-94, year 2005, Product SSP-94. D, year 2005, Banding and stacking delivery system Palamides, type BA-900, year 2001 Single mailer machine Stahl GmbH & C, station D 66-M, 8-bag Folding machine Heidelberg Postpress, type RFH-82, built in 2005, Delivery and banding machine system Palamides Delta 703

Cylinder/flatbed die-cutter, fully functional, ready for collection immediately Min. format: 160x210 max. format: 500x700

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STAR SW 20 ist eine CNC-Langdrehautomat mit hoher Präzision, großer Genauigkeit und Zuverlässigkeit. Kapazitäten: 11 Achsen, 2 Spindeln, max. Bearbeitungsdurchmesser 20 mm, Gegenspindel bis 10.000 t/min. Technische Daten: Spindel 3,7 kW, angetriebene Werkzeuge 1,2 kW (8.000 t/min), Schlitten 7 und 5 Positionen, Gegenbearbeitung 8 Werkzeuge (6 angetrieben), Eilgang 35 m/min, Anschluss 50 Hz 3x380 V, Gewicht ~3400 kg, Maße L2600×B1150×H1765 mm. Zubehör: Stangenlader, Lampe, Kühleinheit 150 l, Ölnebelabsaugung ELBARON, Schnittstelle Stangenlader. Erreicht enge Toleranzen; Branchen: Automotive, Uhren, Werkzeugbau, Luftfahrt, Medizintechnik. Technische Daten ohne Gewähr

Cutting height: 175 mm Motor output: 15 kW cutting width: 620 mm Cutting length: 5200 mm Dimensions (L/W/H): 7000 x 1470 x 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of drawer: 13 Stk. weight: ca. 150 kg range L-W-H: ca. 1100 x 620 x 1120 mm Manufacturers Suggested Retail Price: approx. 6.575 euros Tool set: 448 pieces Special price available upon request Features: - Mobile tool cart including a 15 cm wooden worktop Sturdy and durable work surface for heavy-duty tasks - 13 high-quality drawers - 11 drawers with organized contents Includes a 448-piece tool set () Drawers with locks The left and right drawers can be locked separately - Color = Green - 2 fixed casters / 2 swivel casters - Includes parking brakes - Corner guards: Corner protection edges mounted all around To protect the cart and the surrounding area from damage The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 7100 mm swing diameter: 8000 mm turning height: 4700 mm distance between table and cross rail: 5495 mm workpiece weight: 150 t faceplate turning speed range: 0,3 - 19 U/min main drive motor: 125 kW cross travel: 4400 mm swivel range of slides - vertical: +30 / -15 ° Control: FANUC 18i-T total power requirement: ca. 155 kW weight of the machine ca.: 291 t dimensions of the machine ca.: 8,6 x 17,6 x 8,3 m - CNC Control Fanuc 18i-T --2-Axis simultanous (X- & Z) - Z-Axe with hydraulic balance - Digital Scale in X and Z Axis - 2 rams on crossrail The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Polar Mohr LW 1000-4 paper stack lift - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Polar Mohr LW 1000-4 paper stack lift Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Polar Mohr LW 1000-4 paper stack lift Price: 4500 EUR Download PDF Polar Mohr LW 1000-4 paper stack lift The unit is in excellent technical and visual condition. This is a currently manufactured model. Hydraulic drive. Power supply: 380V. Features an automatic lifting cycle controlled by a photocell, as well as a manual mode; high-speed operation. Load capacity: 1000 kg. Pallet dimensions: 1 ...

Number of working hours: 985 h Model: TX90 Year of manufacture: 2011 Reach: 1000mm Controls: CS8C Load capacity: 6 kg Repeatability: ±0.03mm Robot weight: 111 kg Axles: 6

turning diameter: 350 mm turning length: 200 till 1040 mm control: OSP-P200L total power requirement: kW weight of the machine ca.: 11000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max.working dia. 550mm. max. working length 2500mm. P motor 15Kw, weight of lathe 15 ton

Punching Crucible TMZ Type L122, built in 1997, format 93x126 cm, punching force 350 to., speed 1400 rpm, quick-release frame, safety floor mats, in good condition, immediately available

General SKU224Y101 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor4 KW Inlet diameter800 mm Specified Features - Bag dump station MaterialStainless steel 1.4305 (303) General MakeSAM TypeBag dump station Year of construction2019 Mounted on legscheck With switchgear(as is) Floorspace1,2 x 1,2 m Total height3,3 m Weight1.000 kg Extra information Extra SpecificationsWith WAM puls-jet dustfilter motor: 4 kW (400 V, 2670 rpm, (Ex)) 14 filtercartridges (total 2,5 m2 surface) Powdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsFood additivesSugarBag dump stationsAnimal feedSolid pharmaceuticsDyes & pigmentsNew arrivalsMinerals & inorganicPaints & coatingsGerickeIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceut ...

General SKU224Y102 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor4 KW Inlet diameter800 mm Specified Features - Bag dump station MaterialStainless steel 1.4305 (303) General MakeSAM TypeBag dump station Year of construction2019 Mounted on legscheck With switchgear(as is) Floorspace1,2 x 1,2 m Total height3,3 m Weight1.000 kg Extra information With WAM puls-jet dustfilter motor: 4 kW (400 V, 2670 rpm, (Ex)) 14 filtercartridges (total 2,5 m2 surface) Powdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarBag dump stationsAnimal feedSolid pharmaceuticsDyes & pigmentsNew arrivalsMinerals & inorganicGerickeIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeIndus ...

Key data: 800 kW, 600 kg, 500 kW

Sawing area: 6000 x 2500 mm, incl. extraction

Control Fanuc 16-TC Max. turning diameter 20 mm Spindle speed 10,000 min-1 8-fold revolver with antr. Wkz. Linear slides (3 operated stations) Pick-up spindle (indexing 15°) C-axis main spindle Chip conveyor Extinguishing system Bar loading magazine FMB Turbo 3-26/3200

Orschaner / Stanko 3G71 - Surface Grinding Machine - Sinusoidal magnetic clamping plate - Various accessories - Year of construction 1973 Technical data Basic data: - Accuracy class (GOST 8-71 / 8-82): В (high) - Max. workpiece size L×W×H: 630 × 200 × 320 mm - Max. workpiece weight (incl. magnetic plate): 100 kg - Table surface (magnetic clamping plate): 500 × 200 mm - Distance spindle axis – table: 80 - 445 mm Table movements: - Longitudinal movement (X): max. 710 mm - Transverse adjustment (Z): max. 235 mm - Table speed longitudinal: 5 - 20 m/min (infinitely variable) - Automatic cross feed per stroke: 0.3 - 4.2 mm - Hand feed longitudinal (1 turn handwheel): 15.3 mm - Manual feed transverse (pitch): 0.05 mm Grinding spindle / grinding wheel: - Grinding wheel dimensions: Ø 250 × 32 × 20 mm - Grinding wheel speed: approx. 2680 – 2740 rpm - Vert ...

High-dump bucket LSB Stahlbau Oschersleben 6.8 m³ Year of construction 07/2022 Capacity SAE heaped 6,800 litres Width 3,400 mm Cutting edge + reinforced cylinders Picture Volvo/ SW (Volvo L150/ L220 ...) Weight 3,800 kg good, ready for use = little used Net price ex site 15,900,-- € + VAT Sale from location BL Thuringia Code No. Q48

Lathe STANKO 1M65/5000

Lathe STANKO 1M63/2800

· Manufacturer: CLAAS, · Model: AXION 930 Stage V (CMATIC), · Machine No. / Serial Number: A6401038, · First registration (FR): 08.09.2023, · Operating hours: approx. 2,100 h, · Engine power: 258 kW / 350 HP (FPT 6-cylinder diesel engine, EU Stage V), · Gearbox: Continuously variable CMATIC transmission (50 km/h), · Condition: Used, very well maintained, workshop-tested and ready for operation, · Manufacturer: CLAAS, · Machine No. / Serial number: A6401038, · First registration (FR): 08.09.2023, · Operating hours: approx. 2,100 h

This 11s STAR MICRONICS SV-38R type B was manufactured in 2015. It features a maximum turning diameter of 38 mm and a maximum headstock stroke of 350 mm. The machine is equipped with a FANUC Series 31i-MODEL B5 CNC control and offers rapid traverse speeds of up to 30 m/min. If you are looking to get high-quality turning capabilities, consider the STAR MICRONICS SV-38R type B swiss-type CNC sliding-headstock automatic lathe we have for sale. Contact us for further details.

General SKULY020 LocationSwitzerland CEcheck Pressure Working pressure0.2 Bar Main Features MaterialStainless steel Volume8 Ltr. Specified Features - Stainless Steel Reactor ReactorFluidized bed reactor, batch Capacity8 l Max. temperature1100 °C General MakeSCHWING Fluid Technik GmbH TypeBCR 1100-1550 (laboratory fluidized bed reactor) With switchcheck With switchgear(as is) Extra information Batch laboratory fluidised-bed reactor. Suitable for laboratory testing and process development applications, including calcination, oxidation, reduction, tempering and surface modification. Maximum operating temperature up to 1,100 °C. Maximum fluidised material volume: 8 litres. PLC with 4 programmable segments for inert gas and process gas. Mass flow controller for inert gas. Sampling system with cyclone. 3 exhaust filters. Emergency inerting with N₂ in case of power failu ...

Ref. -No.: 10662 Manufacturer: STARRAG HECKERT Year of construction: 2009 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 221XXX X-Travel: 2200 mm Y-Travel: 1600 mm Z-Travel: 1850 mm Spindle Diameter: 100 mm Max. Tool Weight: 35 kg Max. Tool Length: 800 mm Max. Tool Diameter: 250 mm Clamping Area: 1000 x 1250 mm Tool Piece Magazine With: 60 Pcs./pcs. Max. Torque: 25.000 Nm Turning Speed Range - Stepless: 40000 mm / min Rapid Traverse: 40 m / min Numbers Of Pallets: 2 pallet change time: 47 s Weight Of The Machine Ca.: 26,5 t Position uncertainty P: 0,008 mm Position deviation Pa: 0,006 mm Positional dispersion Ps: 0,005 mm Maximum table rotation: 10 RPM Further information: - Design: Thermally symmetrical column design with optimal chip flow for machining castings. - Applications: Mechanical engineering, energy technology,  ...

Ref. -No.: 10669 Manufacturer: STARRAG HECKERT Year of construction: 2005 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 625 mm Y-Travel: 650 mm Z-Travel: 650 mm Max. Tool Weight: 10 kg Max. Tool Length: 350 mm Max. Tool Diameter: 80 mm Tool Taper: HSK-A63 nach DIN 69893 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 50-10.000 RPM Numbers Of Pallets: 2 Max pallet load: 400 kg Size Of Pallet: 500 x 400 mm pallet change time: 8/5 s coolant reservoir: 1100 L. Machine length: 5800 mm Machine width: 4800 mm Weight Of The Machine Ca.: 12,8 t Spindle power: 24 / 37 kW Further information: Equipment Pallet changer Chain-type tool magazine with 60 tool positions KNOLL coolant system with fleece filter Internal and external emulsion cooling Renishaw probing system Tool breakage detection in the tool magazin ...

Ref. -No.: 10670 Manufacturer: STARRAG HECKERT Year of construction: 2002 Type of control: CNC Control: HEIDENHAIN TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 750 mm Y-Travel: 750 mm Z-Travel: 700 mm Max. Tool Weight: 10 kg Max. Tool Length: 400 mm Max. Tool Diameter: 160 mm Max. Size Of Workpiece Lxwxh: 85 mm Tool Piece Magazine With: 80 Pcs./pcs. Spindle taper: HSK63 Spindle Speed: 15.000 RPM Max. Torque: 350 Nm axes: 4 Rapid Traverse: 40 m / min Internal cooling: 50 bar Numbers Of Pallets: 2 Max pallet load: 500 kg Size Of Pallet: 500 x 500 mm pallet change time: 9 s Machine width: 4000 mm Machine Height: 3300 mm Weight Of The Machine Ca.: 15 t Further information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement.

Machine working can sort va individually high technical level complete documentation service

Ref. -No.: 10533 Manufacturer: COORD3 Year of construction: 2008 Type of control: CNC-Steuerung Control: CNC Storage location: Halberstadt Country of origin: Italy Machine weight: 5600 kg X-Axis: 3000 mm Y-Axis: 1500 mm Z-Axis: 1000 mm CMM Pressure: 0,42 MPa Further information: The machine can be viewed under power by arrangement.

sliding headstock CNC lathe, year 1998, CNC 16-T. Used machine. More info & price on IndustrialBuyer.

For sale is the supporting structure of a dismantled industrial hall (built in 1983) with an original floor area of approx. 2,300 m². The steel frame construction consists of bolted IPE solid-walled rolled sections (IPE 550 columns, IPE 450 trusses) and is completely hot-dip galvanised – ideal for the reconstruction of an industrial, warehouse or production hall. Technical key data: Hall width: approx. 24.5 m, length: approx. 93.5 m. Eaves height: approx. 6.3 m | Ridge height: approx. 7.2 m. Supporting structure: hot-dip galvanized steel frame construction (without crane rails / without wall and roof cladding). Documentation: Original statics, plans available. Condition: Dismantled, ready for transport Location: Mayen-Koblenz district (Rhineland-Palatinate) Price: The net sales price of the hall construction will be communicated on written request with complete compa ...

This system hall from the manufacturer HALTEC, type Stahlflex SH10 12 × 48 × 6.2 m, was built in 2006 as a storage and picking hall and is ready for dismantling and reuse. Eleven frames made of IPE 220 with drawstring span 12 m without internal supports. The wall and roof consist of sandwich panels, a continuous skylight and three smoke and heat vents provide daylight and ventilation. The approved factory drawings from 2006 and an as-built plan from 2017 are available. The hall will be vacated in January 2027 and dismantled in February 2027; high-speed doors, lighting and office installation are part of the scope of delivery.

This system hall from the manufacturer HALTEC, type steel flex 17.5 × 30 × 6 m, was built in 2001 as a warehouse and is ready for relocation. Seven hot-dip galvanized frames made of IPE 240 span 17.50 m without internal supports, the roof and walls are insulated with sandwich panels. The hall includes the tested manufacturer's drawings, the type statics and the test report of the TÜV.

Robot ABB Robotics IRB 2400 - IRB2400/16 Standard / M2004 - IRC5 Controller (Ser.No. 24-50937) Production 24.02.2006 Key technical data of the IRB 2400 family The exact performance values depend on the exact sub-variant (e.g. Standard, /10, /16 or /L): • Payload: Typically 10 kg to 20 kg (standard variants often with 16 kg, the long-arm variant IRB 2400L carries a maximum of 7 kg). Reach: Depending on the version, 1,550 mm up to 1,800 mm for the long-arm model. Degrees of freedom: 6 axes for maximum flexibility. • Net weight: Approx. 380 kg (pure manipulator without control). • Mounting: Extremely flexible – can be mounted on the floor, wall-mounted or fully suspended from the ceiling. Typical areas of application Thanks to its high path accuracy and robust design, this articulated robot is mainly used in the following areas: • Arc Welding: One of the main ...