128,657 used machines on RESALE, but how to find them? Machine Search
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 30° 12 mm -Square: 80 x 80 mm -Length: 2500 mm -Weight: 120 kg
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 5/8/9/12 mm -Square: 54 x 45 mm -Length: 2550 mm -Weight: 70 kg
Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 13.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg
Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 8.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg
Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 5 mm -Dimensions: 45 x 220 mm -Length: 2400 mm -Weight: 120 kg
Bending tool, die, upper blade, top tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm -Weight: 110 kg
Column jib crane, overhead crane, workstation crane -Load capacity: approx. 250 kg -Reach: 1100-1800 mm -operated: pneumatically -swivel -Weight: 85 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 230 mm -Jaw height: 73 mm -Clamping depth: max. 300 mm -swivel -Weight: 70 kg
Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools Quantity: 4 pieces -Clamping height: 95 mm Price: for 4 pieces -Weight: 10 kg
Inv. Num. : 8093 Type: RX170HP CS7 Producer: Stäubli Created: 1996 Parameters: Maximum arm reach: 1835 mm Number of axles: 6 pieces Maximum load capacity: 65 kg Accessories: A stand for positioning the robot Cable harness Manual Programmer RoboDK Offline Programming Software Spare parts for CS7
2018 Type: 101-60 Machine No.:108141 electric double eyelet device with foot switch for inserting 2 eyelets at a fixed distance of 28mm Punches holes and eyelets in one operation. Eyelet type 8E, 8E 4long and 8E 5long Inner diameter 5.50mm Insertion depth 60mm Paper thickness 2 to 15 sheets (8E), 2 to 20 sheets (8E 4long) 5 to 25 sheets (8E 5long) Automatic eyelet feed via magazine Weight 49kg Available: immediately Located: Germany
Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Jaw height: 63 mm -Clamping depth: max 165 mm -Weight: 35 kg
Clamping plate, welding table, welding table, marking plate -Width: 450 mm -Length: 400 mm -Height: 50 -with fitting bore and threaded holes: M12 (threaded insert M16 x 1.5) -Weight: 60 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 200 mm -Clamping depth: max. 280 mm -Dimensions: 600/250/H140 mm -Weight: 50 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 100 mm -Dimensions: 460/170/H120 mm -Weight: 40 kg
Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 160 mm -Clamping depth: max. 110 mm -Dimensions: 470/180/H155 mm -Weight: 35 kg
Machine vice, sturdy vice, drill press vice -Jaws can be moved depending on the workpiece geometry -Vise: rotatable -Jaw width: 255 mm -Clamping depth: max. 300 mm -Dimensions: 680/330/H180 mm -Weight: 95 kg
Machine vice, sturdy vice, drill press vice -Baking extra long baking tray -Jaw width: 400 mm -Clamping depth: max. 130 mm -Weight: 40 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 150 mm -Clamping depth: max. 160 mm -Dimensions: 500/270/H170 mm -Weight: 40 kg
4 Buckles Noise hoods Pile feeder Program In top conditions
Machine vice, sturdy vice, drill press vice -Jaw width: 220 mm -Clamping depth: max. 140 mm -Weight: 60 kg
for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available
Punching force: 250 kN For example, punch a 16 mm hole in 12 mm steel Viewfinder via handwheel Range of tools is included in the price
Machine vice, sturdy vice, drill press vice -Jaw width: 170 mm -Clamping depth: max. 110 mm -Dimensions: 600/200/H120 mm -Weight: 55 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 180 mm -Clamping depth: max. 110 mm -Dimensions: 550/190/H180 mm -Weight: 50 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 125 mm -Clamping depth: max. 35 mm -with prism -Dimensions: 300/125/H70 mm -Weight: 10 kg
Lapping machine, STAHLI FLM 500, 3-ring lapping machine This machine can be inspected under power in our warehouse Test run possible Mimu Machine Tools Gussago BS Italy, Lapping is a [machining](en.wikipedia.org/wiki/Machining) process in which two surfaces are rubbed together with an [abrasive](en.wikipedia.org/wiki/Abrasive) between them, by hand movement or using a machine., This can take two forms. The first type of lapping (traditionally called [grinding](en.wikipedia.org/wiki/Grinding_machine)), involves rubbing a brittle material such as [glass](en.wikipedia.org/wiki/Glass) against a surface such as [iron](en.wikipedia.org/wiki/Iron) or glass itself (also known as the lap or grinding tool) with an abrasive such as [aluminum oxide](en.wikipedia.org/wiki/Aluminum_oxide), [jewellers rouge](en.wikipedia.org/wiki/Jeweller%27s_rouge), [opticians rouge](en.wikipedia.org/wiki/Cerium(IV)_o ...
- Flat pile stacker - Tremat -Digital control - 1st station with 4 pockets - Cross-breaking station with 2 knives - SAK 56.D mobile delivery
Machine vice, sturdy vice, drill press vice -Jaw width: 125 mm -Clamping depth: max. 50 mm -exciting: pneumatic -Dimensions: 530/240/H150 mm -Weight: 56 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 215 mm -Clamping depth: max. 130 mm -Dimensions: 550/220/H125 mm -Weight: 50 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 450/160/H125 mm -Weight: 38 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 450/160/H125 mm -Weight: 38 kg
turning diameter over bed: mm spindle passage: 23 mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 2200 mm swing diameter: 2500 mm turning height: 1600 mm Control: Siemens chip conveyor: total power requirement: 100 kW weight of the machine ca.: 35 t dimensions of the machine ca.: m vertical lathe with two RAM, faceplate Ø 2000 mm, SPS supported control for storable cycles, RAM/channel 1 two Capto recordings C8 with Internal tool cooling, RAM/channel 2, two Capto mounts C8 with internal tool cooling, Chip conveyor / spindle Z-axis as new / without KSS Filter unit / 3 glass scales are missing / control panel is disconnected but complete and OK, a 90 degree angle is missing from the control panel arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 460/310/H160 mm -Weight: 50 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 155 mm -Clamping depth: max. 120 mm -Dimensions: 550/300/H160 mm -Weight: 38 kg
Electric chain hoist STEEL R 2 ( R2 ) Payload: 50 kg Lifting speed: 8 m/min Voltage 380 V used, tested ! Dimensions: 420 x 370 x 300 mm
Linear guide carriage STAR 1651-514-10 rail width: 34 / 45 mm New ! Dimensions: 160 x 140 x 55 mm
Dividing head, dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -with translation -Shaft mounting: Ø 20 mm -Dimensions: 470/230/H240 mm -Weight: 30 kg
Open Linear Bearing Unit STAR 1067-630-40 067-30 Diameter: Ø 30 mm Foot: 84 x 60 mm New ! Dimensions: 84 x 68 x 59 mm
Link pipe cutter, pipe cutter -cutting pipe diameters: 80 - 200 mm -The number of links allows the device to be adjusted to the desired pipe diameter. -steel cutting wheel -Ideal for working in trenches -Transport case -Weight: 11 kg
Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Capacity: 100-400 mm -Double clamping device: for pipe mounting -Dimensions: 1000/450/H260 mm -Weight: 22 kg
Switch socket, socket STEEL 8575/11-506 16 A-6h 240/415 V explosion-proof ! New ! Dimensions: 270 x 110 x 160 mm
Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Width: 550 mm -Depth: 660 mm -Height: 970 mm -Drawer internal dimensions: 440 x 590 mm -Drawer heights: 4 x 90/2 x 180 mm -Weight: 80 kg
Cantilever racking, heavy-duty racking consisting of: -Shelf: with 2 stands each -Support arms: double-sided -6x bars, depths: 900/500/400/300/230 mm -welded Quantity: 1 piece remaining -Transport dimensions: 2100/2020/H2170 mm -Empty weight: 430 kg
CEE Plug, Plug Safety Plug STEEL 8575/12-506 16 A-6h 200 / 415 V 50 / 60 Hz 3P + N + PE explosion proof ! New !' Dimensions: 160 x 65 x 65 mm
Clamping plate, welding table, welding table, straightening plate -Width: 1750 mm -Length: 1400 mm -Elevation: 840 -with: supporting ribs -Weight: approx. 1000 kg
maximum number of results exceeded
please refine your search
