sta used for sale

Heidelberg / Steel TI 52-4 Year of Make: 2001 Flat pile feeder 4 fold pockets HHS gluing device Hook-in shed display

Tool case, tool box, plastic tool box, tool trolley -Manufacturer: Stanley, plastic tool box tool trolley type 1-93-968 -3 compartments: see photos -lockable: without lock -Dimensions: 470/310/H620 mm -Weight: 4.5 kg

Storage containers, transport storage containers -Storage container: made of stainless steel with 3 compartments, mobile -3 compartments: with container, see photos -Dimensions:1035/520/H640 mm -Weight: 48 kg

Punch power: 400 kN table surface area: ca. 1250 x 700 mm throat: 500 mm hole punching press: capacity (dia. x thick.): 100 x 3 mm hole punching press: capacity (dia. x thick.): 75 x 4 mm hole punching press: capacity (dia. x thick.): 30 x 10 mm x-travel: 700 mm y-travel: 470 mm total power requirement: 4 kVA weight of the machine ca.: 2 t dimensions of machine L x W x H: 1,50 x 1,72 x 2,00 m Accessories: tool cabinet with various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, valve drive, actuator, lifting drive, trapezoidal thread spindle -Manufacturer: Staff, screw jack -Type: Size 05 Version A -Useful stroke: 200 mm -Trapezoidal thread spindle: Ø 18 mm -Dimensions: 120/830/H315 mm -Weight: 2.2 kg

Connector, plug, pin header, socket header -Connector: 3-pin 54 pieces -Type: 3-pin -Article No.: 10170676 PO5017941 -Price/Delivery: complete -Dimensions: 23/11/H8 mm -Weight: 0.02 kg/pc.

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Stankoimport Caenaho, hydraulic unit -Motor: 220/380 V/ 1400 rpm -Individual components: Technical data see photos type plates -Dimensions: 420/380/H310mm -Weight: 30 kg

Round stack feeder 4 pockets Press delivery

clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 365 x 305 mm -Dimensions: see photo technical drawing -Dimensions: 365/305/H150 mm -Weight: 57 kg

clamping plate, clamping table, clamping cube, press table -Clamping table: clamping plate for hydraulic press eccentric press -Clamping surface: 500 x 280 mm -Dimensions: see photo technical drawing -Dimensions: 500/280/H180 mm -Weight: 53 kg

clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T slot, solid design -Material: steel -Groove width: 14 mm -Slot nuts: 10 mm, dimensions see photo technical drawing -Dimensions: 155/110/H90 mm -Weight: 9.3 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: with 2 prisms, for marking plate, clamping plate, straightening bench ... -Prism width: 8/15 mm -Dimensions: see photo technical drawing -Dimensions: 152/40/H25 mm -Weight: 1.1 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 29 mm -Dimensions: see photo technical drawing -Dimensions: 160/50/H22 mm -Weight: 1.2 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 51 mm -Dimensions: see photo technical drawing -Dimensions: 60/44/H50 mm -Weight: 0,8 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 22 mm / 90° -Dimensions: see photo technical drawing -Dimensions: 100/25/H21 mm -Weight: 0.3 kg

This single stage absorption chiller is on perfect condition ready to start working. It runs with hot water and use Advaguar as working fluid. Is available on two configurations, with the container where is installed and without it. Power:1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C YOM: 2008 Frequency: 50Hz Voltage:400 V Working Fluid: Advaguard

1.Powder curing furnace 2,000 x 1,900 x 2,000mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Inner dimension height 2,000 mm 4 Outer dimensions incl. thermoblock length 2,300 mm 5 Outer dimensions incl. thermoblock width 2,300 mm 6 Outer dimensions incl. thermoblock height 2,700 mm 7 Substructure 1 set of steel profile 50 x 50 mm 8 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5005 9 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 10 floor stove gets 2 entry rails for tray wagons 11 Temperature 220°C 12 fans 1 pc. 6,000 m³/h 13 electric motors 1 pc 1.1 kW , 1450 rpm, 3 F, 50 Hz 14 Thermal output 36 kW = 30,960 kcal/hour 15 wing doors on one side 2 pcs insulated with rock wool 150mm 70Kg/m² Heating Indirectly via thermoblock Thermoblock 1 set stainless steel INOX AISI 316 heat-resistant fans and heat-resistant bea ...

1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 2. Powder Coating Booth -KG DUO-01 3. Wagner powder coating plant, – Prima Sprint – 1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 1 Inner dimension length 1,500 mm 2 Inner dimensions width 1,200 mm 3 Internal dimensions height 1,750 mm 4 Outer dimensions incl. thermoblock length 2,250 mm 5 Outer dimensions incl. thermoblock width 1,815 mm 6 External dimensions incl. thermoblock height 2,006 mm, 2,296 mm incl. exhaust pipe 7 Substructure 1 set of steel profile 8 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 9 insulation walls, ceiling 1 set of rock wool 150 mm, floor is insulated with 50 mm 10 Floor Furnace Gets 2 Entry Rails for Tray Wagons 11 Temperature 220°C 12 fans 1 pc. 2,600 m³/h 13 electric motors 1 pc 1.1 kW , 1450 rpm, 3 F, 50 Hz 14 Thermal power 14 kW 15 hinged doors, single ...

Robot, Stäubli TX90 Lbmn, with control CS8C control panel and accessories – used - : Price from location: 14.250.-€ (net) Manufacturer: Stäubli Type: TX90 Year of Make: 2011 Machine No.: F11/5G1VB1/A/01 Weight: 113kg Payload: 5kg Condition: good Available: immediately Location: Frankenberg camp / Saxony

Part No.: 0000071163 // Type: ALPHA20 HOR Equipment / Additional information: With tank Refix DE (Fabr. No.: 15 P 0316 90633)

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 30 mm / 70° -Dimensions: see photo technical drawing -Dimensions: 150/48/H37 mm -Weight: 1.7 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 40 mm -Dimensions: see photo technical drawing -Dimensions: 160/50/H22 mm -Weight: 1.5 kg

Mobile cultivator Starchl MK50 FEEDER 450/450 engine diesel 190hp Hours 300

Head Machine 6 rows Weight range approx. 70-120gr with various warp knitting drums with pre-portioner Output Weight outputs approx.: 12,000 pieces per hour TOUCH control, · for wheat doughs, mixed wheat doughs, rye mixed doughs

Shaft material, shaft, steel shaft, hardened shaft, profile shaft, splined shaft, toothed shaft -Spline shaft: Splined shaft profile shaft 8 teeth -Diameter: 54 mm -Length: 2440 mm -Material: steel -Dimensions: see photo technical drawing -Dimensions: Ø 54 x 2440 mm -Weight: 37 kg

Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley -Manufacturer: Steel, crane chassis without drive -Beam width: adjustable, set to max. 130 mm -Load capacity: kg -Dimensions: see photos -Dimensions: 405/360/H350 mm -Weight: 43 kg

clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Clamping surface: 405 x 300 mm -Material: steel -Dimensions: see photo technical drawing -Dimensions: 405/300/H200 mm -Weight: 49 kg

M. No.: 322 Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, -Clamping plate: surface plate, marking plate -Size: 415 x 250 mm -Height: 60 mm -Dimensions: 415/250/H60 mm -Weight: 45 kg

1 used ACM STAR 700 Vertical Bandsaw New in 2015, as is where is Including Transportdevice

Load beam Manufacturer: Carl Stahl Length: 3 m Load beam in a modular system with curved suspension loop as single-point suspension, suitable for load hooks according to DIN 15401 and with two adjustable, burnt safety load hooks.

We offer about 8 pieces of foldable lattice boxes Condition: Mint

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 115/23 mm / 121° -Dimensions: see photo technical drawing -Dimensions: 140/130/H130 mm -Weight: 13.8 kg

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys -Transport trolley: with steel plate -Platform: 900 x 900 mm with hole Ø 50 mm -Design: 2x swivel castors with brake, 2 fixed castors -Load capacity: kg -External dimensions: 900/900/H255 mm -Own weight: 62 kg

Falzmaschine - Flat Pile Folding Machine Stahl T52/4-4-SAK66 Year 1988 - Serial-No. 36336-88-148120 Folding Size min. 100 x 150mm Folding Size max. 520 x 820mm Folding Type: 1. Unit 4 Buckles - folding width 500mm 2. Unit 4 Buckles - folding width 500mm Pile height max. 690mm Stream delivery SAK 66 Include Compressor Counter - Control PCS 100 Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Falzmaschine - Folding machines Stahl T 52.3/4-T-F Year 1995- Serial-No. 69024/95-231703 Flat pile feeder - TREMAT 1.Folding unit 4 buckles 2.Folding unit 4 buckles Gateway buckles Counter Anti noise hoods Stream delivery include Kompressor Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Falzmaschine - Folding Machine Stahl T52/4-4-X-SAK66 Year 1987 - Serial-No. 33909/87-136159 Folding Size min. 100 x 150mm Folding Size max. 520 x 820mm Folding Type: 1. Unit 4 Buckles - folding width 500mm 2. Unit 4 Buckles - folding width 500mm 3. Unit knife Pile height max. 690mm Stream delivery SAK 66 Include Compressor Counter - Control PCS 100 Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Gratings, grating, light grids, insert grids, insert grids, stair treads, safety steps, grating step, step, safety step, perforated sheet step -Grating step: safety step perforated sheet step hot-dip galvanized -Type: ID 600x200x45 mm -Number: 6x grates available -Price: per piece -Weight: 3.3 kg/piece

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 150 mm -Type: unknown -Mounting: Ø 55 mm -35 teeth: belt width 25 mm -Division: see photos -Quantity: 1x timing belt pulley available -Dimensions: Ø 150 x 45 mm -Weight: 3.4 kg

Falzmaschine - Folding machine Stahl T50/4-4-SAK66 Year 1991 - Serial-No. 44429/91-184041 Folding Size min. 100 x 150mm Folding Size max. 500 x 820mm Folding Type: 1. Unit 4 Buckles - folding width 500mm 2. Unit 4 Buckles - folding width 500mm Pile height max. 690mm Stream delivery SAK 66 Include Compressor Counter - Control PCS 100 Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 24 m -Transport dimensions: 400/400/H100 mm -Weight: 14.5 kg

Falzmaschine - Folding Machine Stahl T 36.4/KB Baujahr / Year 1989 - Serial-No. 30335-118047 Flachstapelanleger / Flat Pile Feeder Falztyp: 4 Taschen - Schwert Folding Type: 4 buckles - 1 knife Format / Size: min. 80 x 100mm - max. 360 x 650mm Papiergrammatur / Paper weight: 40 – 250g/m² Stapelhöhe / Pile height max. 580mm Geschwindigkeit / Speed min. 10 m/min. - max. 160m/min. Durchmesser Falzwalzen / Diameter of folding rollers 32mm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 10 mm -Length: 10 m -Transport dimensions: 370/330/H130 mm -Weight: 3.9 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 12 mm -Length: 20 m -Transport dimensions: 380/150/H400 mm -Weight: 13.8 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 20 m -Transport dimensions: 360/90/H400 mm -Weight: 12.4 kg

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 40 m -Transport dimensions: 480/100/H480 mm -Weight: 20.3 kg

Kombi-Falzmaschine - Combination Folder Heidelberg Stahlfolder KH82-4KTLL 32 Seiten Seitenfalz - 32 pages cross Fold Year 2008 - Serial-No. FH.FNJ0-00256 Palettenanleger / Pallet Feeder PFH-82 Format / Size min. 140 x 180mm Format / Size max. 820 x 1200mm Falztyp / Folding Type: 4 buckles - 3 knives Automatische Falztascheneinstellung / automatic buckles setting Speed 50.000 Cycles/hour Digitaler bildschirm / Digital Display Inklusive Kompressor / include Compressor Inklusive Handbücher / Included Manuals Auslage / Delivery Heidelberg SAK-94 Year 2006 - Serial-No. FH.DAD0-00421 Arbeitsbreite max. 940mm / Working width max. 940mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Multi-purpose hoist, grab hoist, lifting hoist, assembly hoist, cable hoist, universal cable hoist, cable pulling device, steel cable for cable hoist -Steel rope: for rope pull multi-purpose pull -Rope diameter: 11 mm -Length: 20 m -Transport dimensions: Ø 420 x 100 mm -Weight: 11.5 kg

Hatches, cargo hold hatches, cover plate, manhole cover -Cover plate: manhole cover with support ribs -Material: sheet steel thickness 10 mm -External dimensions: 750/750/H70 mm -Inner dimensions: 600 x 600 mm -Weight 51 kg/piece