sta used for sale

M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm

Machine light, machine light, work area light, system light, compact light, switch cabinet light -Manufacturer: steel, compact luminaire with glued-on escape sign -Type: C-LUX 6500/1081 -Voltage: 230 V -Fluorescent lamp: 1x 8 watts -Dimensions: 445/110/H190 mm -Weight: 2.1 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder -Manufacturer: GSL, Hydraulic cylinder, tilting cylinder, stroke 1590 mm -Type designation: D040025-Z2 T06 -Piston rod: Ø 25 mm / Mounting Ø 20 mm -Dimensions: 1895/90/110 mm -Weight: 19.5 kg

Gratings, gratings, light grids, insert grilles, insert grilles -Dimensions: 1090 x 1110 mm -Total height: 140 mm -Longitudinal struts wall thickness: 2 mm - Gratings: Hot-dip galvanized -Weight: 40kg -Quantity: 1 piece available

The depacker enables the unpacking of bottles from the shrink film. PLC SIEMENS S7-300. Output: up to 4 bundles/min.

Cell ARCK INGENIERIE with milling robot Staubli Opis:Year of construction: 2006 Robot: Staubli Unimation RX160 Control: CS8C 6 workpiece brackets

Trailer spreader with wheel drive, stable all-steel construction (mostly galvanized sheets on both sides, primed and painted), net capacity 0.8 m³, spreading material distributor 400mm for spreading widths of 1-6 m with salt (grit 1-4 m), manual spreading pattern adjustment, path-dependent control from 2 - 60 km/h, electrical system 12 volts, digital control panel V-PAD with various displays and setting options (memory card not included) height-adjustable pulling device with overrun brake, towing eye (ball coupling optionally available). Other equipment: protective grille, tarpaulin folding roof, rear siding, operating instructions, quick start instructions, workshop instructions, spare parts lists, connection cable with separation point, etc. The spreader trailer is unused – only soiled by corrosion protection application, last technical inspection until 09-22. Technically almost  ...

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, Control box, burner control -Manufacturer: Landis & Staefa, automatic burner control unit -Type: LMG22.130A27 -Dimensions: 90/60/H60 mm -Weight: 0.2 kg

air flow quantity: 1650 m³/h suction power: . kPa power capacity: 0,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

510 J type - equipped with Iemca MiniBoss 325/37 new in 1996 - tool eye - accessories - Fanuc 18-TB Control

Clamping plate, welding table, welding table, straightening plate -Length: 2285 mm -Width: 1250 mm -Height: 780 mm -Sheet thickness: 75 mm -Weight: 1737 kg

TECHNICAL SPECIFICATIONS Manufacturer: MOGENSEN Designation: Stangensizer / Stangenrost Type: DX3527 Year of construction: 1994 Version: Two-deck Clear length: 3,500 mm Clear width: 2,300 mm Total height: 2,750 mm Rod diameter above: 70 mm Rod diameter bottom: 40 mm Top gap distance: 216 mm Gap distance below: 330 mm SPECIFIC COMMENT - Reappraisal 2020, since then unused - Robust construction - Ideal for coarse separation

Winch rope, crane rope, hoist rope, wire rope, steel rope -Wire rope: Ø 10 mm -Length: 4 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 1.45 kg

STAS (B) Moving floor - semi-trailer Type S3 Variant SZ336V SANH open box

Measuring table 1,000 x 1,000 mm, with base cabinet

faceplate diameter: 1130 mm swing diameter: 1500 mm turning height: 1100 mm faceplate diameter: mm swing diameter: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: STANKO TYPEL 1512 Build in: 1977 with pneumatick 3-jaw stuck 1130 mm max. turning diameter 1500 mm max. turning height 1100 mm Motor 30 KW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bezel, setting stick, lynette -Intermediate plate for: bezel -Prism size: 33/38 mm -Height: 71 mm -Drawings: with the photos -Dimensions: 345/175/H71 mm -Weight: 32 kg

price outside EU: 8.850,- € gross price: €10,531.50 - - - - - Yanmar Emergency Power Unit 13 kVA - Stage V + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Yanmar (Japan) - Model: 3TNV - 3 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 12.5 / 13.7 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Emission standard: Stage V - Dimensions: 150 x 75 cm - Weight: 510 kg - Tank volume: 22 liters - Sound level: approx. 61 dB (7m)  ...

Injector Inject Star Type: PI 36 Number of needles: 36 Needle diameter: 4 mm Passage mechanism type: Gear rack rail Electric power: 3kW Machine dimension in cm: 50x160x200cm

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Stamping dimension: see photo with dimensions -Socket: Ø 40 mm -Dimensions: 370/270/H275 mm -Weight: 67 kg

Clamping angle, clamping aid -Clamping angle: for clamping aid workpiece clamping -Dimensions: 600/380/H500 mm -Wall thickness: 25 mm -Bores below: Ø 11, on the side: Ø 13/180 mm -Weight: 107 kg

STAMFORD Synchronous Generator HVSI 824 F2 2788 KVA 10,500 V 153.3 A 50 Hz, 1500 1/min. Accessories: - 2 sets winding PT100 - AVR MA327, PFC-3 COMPLETELY RECONDITIONED, restored, windings impregnated

Clamping plate, welding table, welding table, straightening plate -Steel table -Length: 2200 mm -Width: 1255 mm -Height: 705 mm -Panel thickness: 69 mm -Weight: 1396 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: O 355 mm -Short taper: size 8 (139.7 mm) -Number: 1x discs available -Price per piece -Dimensions: O 355 / H175 mm -Weight: 38 kg

composed of: Belt infeed belt: • Type: FAG 500-1500 • Width 500 mm • Barrel length 1,500 mm • Speed approx. 25m/min • Working height 850+-50 mm • Power approx. 0.5 kW Film welding machine: • Type: SWS 5020 • Machine size (LxWxH): 2103 x 15653 x 1410 mm • Max product size (lxW): unlimited x max 480 mm • Welding punch width: 500 mm • Passage height: 220 mm • Conveyor belt speed: 35m/min • Film width: max. 650/650 mm • Film diameter max 300 mm • Connection 16A connector, 3ph 380 V • Transverse welding servo motor • Longitudinal welding pneumatic • Working height 850 mm Shrink tunnel: • Type: STA-45 30 • Dimensions: 1.840L x 1080 W x 1250 H mm • Tunnel opening: 1200 L X 450 W X 300 H mm • Product size max: 1700 L x 400 W x 250 H mm • Conveyor belt speed 10-40/min • Weight 520 kg • Working height 850 mm • C ...

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Version: heavy -Groove: 24 mm -Slot spacing: 80 mm Quantity: 1 piece -Dimensions: 360/285/H245 mm -Weight: 70 kg

Dreh-Øüber Bett: 400 mm Dreh-Øüber Support: 220 mm turning length: 1000 mm spindle turning speed range: 12,5 - 2000 U/min spindle taper: Bajonett 55022 spindle bore: 47 mm feeds - longitudinal: 0,07 - 4,16 mm/U feeds - cross: 0.035 - 2,08 mm/U thread - mm pitch: 0,87 - 192 mm thread - inch: 2 - 24 Gang/ inch. rapid travel - longitudinal/face: 3,4 / 1,7 m/min spindle drive: 11 kW power capacity: 13 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 2,8 x 1,2 x 1,5 m • 3-jaw chuck Ø 250 mm, 4-jaw chuck 200 mm, • 2-axis- digital display, ANILAM WIZARD LATHE - refinished in 1992, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Backhoe bucket, excavator bucket, demolition bucket, trench bucket, excavator bucket -Execution: stable -Width: 415 mm -Height: 450 mm -Depth: 405 mm -Admission intermediate dimension: 98 mm -Bore mounting: Ø 25 mm -The recording on the spoon: can be changed by us at an additional cost -Own weight: 26 kg

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: stable -Width: 290 mm -Height: 780 mm -Depth: 930 mm -Admission intermediate dimension: 205 mm -Bore mounting: Ø 45 mm -Ripper teeth -The recording on the spoon: can be changed by us at an additional cost -Own weight: 116 kg

Grids, grids, light grids, inlay grids, inlay grids, stairs -available: 1 piece -Dimensions: 1260 x 230 mm -Total height: 60 mm - Struts wall thickness: 2 mm - Bridge height: 30/10 mm -Grating: hot-dip galvanized -Weight: 9 kg

Stainless steel container 1000 l Manufacturer: Willi Lermer Wiesbaden Volume 1000 l stackable 10 pcs available Very good condition, straight from production!

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 400 mm -Taper holder short taper: 6 -Weight: 66.5 kg

Central lubrication, oil circulation system, single-line pump, central lubrication unit, grease lubrication pump -Grease lubrication pump: hand-operated, made from Stankoimport 3218 guillotine shears -Dimensions: 725/200 / H310 mm -Weight: 11 kg

Clamping angle, clamping aid -Clamping angle for: workpiece clamping -Dimensions: 705/605/H710 mm -Wall thickness: 45 mm -Weight: 303 kg

VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 3730 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Tumbler dimensions: 1300 x 2450 mm Dimensions: 3270 x 1850 x 1900 mm With this machine you are in a position to massage meat at any time, fully automatically and at maximum, so that the general appearance and flavour is improved, as well as the structural loosening up of the meat and the essential assimilation of both the natural juices and injected brine, by binding in, is achieved. HOMOGENEOUS BRINE DISTRIBUTION Sealing-in of Protein: The binding of the surface cells, seals off the inner moisture and prevents drying out. Optimum Protein-Water-Ratio: Whether you massage ham, shoulder, loin, tongue, belly, brisket or rough and fine fillings for cooked, boiled, raw and preserved sausage, whole chickens or chicken parts, fish or othe ...

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 24.6 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 6.65 kg

VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 559 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Drum size: 1300 x 2450 mm Dimensions: 3200 x 1500 x 1950 mm

ROTARY MASSAGER INJECT STAR, MODEL: HS-7 Technical description: Bowl size: 650 x 600 mm Power supply: 380-440V/50-60 Hz Dimensions: 850 x 800 x 1200 mm

Key data: 32 , 40 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Yanmar Engine: 4 TNV 98 TGGEH Engine No.: 189150 Power: 38.7 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S1L2. K1 Gene. No.: X22A025026 Generator power: 40 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Mains/generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 170 Dimensions of the power unit: Width approx. mm: 910 Height approx. mm: 1.350 ...

Execution: Aggregate type: transportable Execution: Soundproofed Technical data engine: Engine manufacturer: FPT Iveco Engine: F34. TEVP01 Engine No.: Power: 54 kW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Diesel Technical data generator: Generator manufacturer: Mecc Alte Generator type: ECP32.2M4C Gene. No.: Generator power: 60 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 4 poles Tank: Execution: Base frame tank with drip pan Content / liter: 216 Dimensions of the power unit: Width approx. mm: 1.110 Height approx. mm: 1,600 mm Length approx. mm: 2,660 mm Weight approx. KG:  ...

Execution: Aggregate type: transportable Execution: Soundproofed Technical data engine: Engine manufacturer: FPT IVECO Engine: F 36 ETVP 03 . A 85 Engine No.: 688073 Power: 74 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Diesel Technical data generator: Generator manufacturer: Stamford AvK Generator type: UCI 224 G Gene. No.: C22G293673 Generator power: 85 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 4 poles Delivery: Comes loose Tank: Execution: Base frame tank with drip pan Content / liter: 450 Dimensions of the power unit: Width approx. mm: 1.200 Height approx. mm: 1.895  ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC 16-320A Engine No.: in production Power: 481 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Diesel Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 D Gene. No.: in production Generator power: 550 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.900 Height approx. mm: 2.550 Leng ...

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 7 mm -Length: 18 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 3.8 kg

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine: TCD 4.1 L4-SV Engine No.: in production Power: 115 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Diesel Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL044-D Gene. No.: in production Generator power: 100 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Hand & Remote Start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.200 Height approx. mm: 2.295 Length  ...

Capacity/ ◆1000kgs. Raise/ ◆85-800mm. Fork width/ ◆550/685mm. Fork length/ ◆1150. Wheel/ ◆Nylon / PU wheels Wear parts can be reordered from us!

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: 18.7 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 3 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: 24.3 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 3.9 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: 20 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 3.2 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 7 mm -Length: 22.6 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 4.75 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 7 mm -Length: 19.7 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 4.15 kg