st used for sale

TO WHOM IT MAY CONCERN ; WE VE 2 PCS NEW UNUSED AIR STARTERS OF GALI AT OUR STOCK TYPE: A45L ROTATION : LEFT SERIAL NO : 0398 EX STOCK. READY TO TRANSPORT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 to. - ex works, freely charged - The container is sandblasted from the outside, primed and completely repainted - iron grey / RAL hue. (On request, other RAL colours are also possible!) general: You will receive an invoice with  ...

Various steel sheets and wooden wagons with wheels Length 1350 - 1700 mm x width 400 - 860 mm x height 1040 - 1720 mm Price: EUR/piece 28,- net + VAT approx. 10 transport aids 1110 x 600 mm Price: EUR/piece 15,- net + VAT

60,000 litres of earth tank - new from the factory - single-walled - for storing rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,50m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 1 ...

80,000 litres of earth tank - brand new - single-walled - for storage of rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,90m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 14319 and ...

T9 - used approx. 20 m³ / 20,000 ltr steel tank with coated inside, standing upright. technical details: capacity: approx. 20 m³ / 20,000 litres material: steel tank with inner coating dimensions: Ø approx. 2.55 m × total height approx. 5.70 m Used steel tank with inner coating, professionally cleaned and in good condition. Standing, above-ground storage tank on 4 steel feet, lid on top of the roof and down at the tank bottom, several inlets and outlets. Steel rack and matching ladder available at an additional cost. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertise ...

Reference E0023 Spare part for Hohner Exact stapler Staple head Hohner 55/7 FR Condition is good - not new Only to commercial buyers with proof. Purchase only available for commercial customers with proof Sale without warranty and warranty. No return accepted. The spare part is sold as it goes and stands. We sell the spar part "as is", no warrenty, no guaranty. We don't take the goods back. Price from location: 15370 Fredersdorf near Berlin - transport costs on request. Price is LOT. Shipping is not included.

Storage number: 3590 CONTAINER ROTARY DEVICE Manufacturer: HENDRIKS, Type: 100 T Machines NR.: 06, Built: 2009 specifications: Size workpiece weight 100000 Kg Diameter 4800 mm Rolls slide. 700 mm Rolls width 480 mm Stepless rotations m/min Engine power 2 x 0.75 kw Drive rollers 1 pc Running rollers 1 pc Length: 3900mm (3700), Height: 1200 mm, Width: 1300 mm (900), Weight: 5000 kg

Banding system ATS US 2000 AB Cornerline; good condition; serviced and tested by ATS customer service; bandwidth 30mm; frame size 360x160mm; Min. Product width 80mm, max.165mm; Max. Product length 270mm; Max. Produnkt height 110mm; Compressed air required. Ultra sonic banding machine ATS US 2000 AB Cornerline; good condition; cleaned and checked by the support of ATS Germany; band width 30mm; frame size 360x160mm; min. product width 80mm, max.165mm; max.product lenght 270mm; product hight 110mm; pressure air needed.

Power bottle 10 ml, 400V / 50Hz , the line includes: a filling machine BOSCH, type FLP 3060, production 12,000 bottles / h, 6 filling stations, with self-enspirating stainless steel rotary lobe pumps, dosing accuracy +/- 0.5%, insertion of the spray pump, a vibrating machine, filling pumps available: 6 stk.C-BOSCH sealing machine for pressure closure, type VRK 4010, max production 12,000 bottles / h.

NOTE additionally a new shaft Description Force , 4000 TN Slide stroke, mm 400 Number of continuous slide stroke, stroke / min 50 Closed height of stamping space mm 1000 Adjusting the table mm 15 Distance between columns in light,mm 1660 Drive power, kW 185 Table dimensions in plan mm: - From left to right in 1620 - Front-to-back in 1570 Dimensions in mm: - in the plan 6100 x 4710 - Height above floor level 6820 - Press height 8680 Weight, t 377

to turn the cans by 180° for example before and after the pasteurizer/can warmer/can coding suitable for all can types: Standard, Sleek, Slim

specifications: - Pressure capacity 100 KN / 10 t - Compressive force adjustable 0 - 100 kN - Stroke length 0 - 150 mm - Clear width approx. 200 mm - Lifting speed 0 - 0.6 m/min - Tool height up to approx. 100 mm - Bending performance - with prism MW 100 flat to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Directional power Wy at straightening block distance of 1m 100 cm³ - Drive 400 V / 1.1 kW - Space requirement approx. W 1100 x H 1000 x D 650 mm - Weight approx. 400 kg

Working widths: 2000 mm roll surface width: 2200 mm Fabric content: 48 Meter 0: 160 mm Roller covering: ALU Clouth speed: 20 - 200 m/min Cloth tension: 20 - 500 N voltage: 400 V / 50 Hz output: kw weight: t dimensions of the machine ca.: m cloth accumulator: 48 meters capacity Number of rolls: 15-axis guide rolls, Ø 160 mm made of aluminum type of material: double polyamide foil hose material thickness: 2 x 15 my to 2 x 50 my movable roller mill is moved up and down with 4 ball screws unit was disassembled after test run for transport The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 50 mm square edge steel: 40 x 40 mm L-beam: 140 x 13 mm Punch power: 900 kN hole punching press: throat: 510 mm hole punching press: max. length of stroke: 29 mm hole punching press: capacity (dia. x thick.): 31 x 20 mm notching: l + T material: 80 x 14 mm no. of strokes: 40 / 45 Hub/min total power requirement: 4 kW weight of the machine ca.: 3,7 t dimensions: 2,1 x 0,7 x 2,12 m Accessories: various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1015 KW Dresser counterpressure steam turbine for sale. 35.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. TUBRINE Brand: DRESSER-RAND (Nadrowski) Type: AVT 72 TW 17 Number: 16225-1 Electr. Power: 1015 KW Rated power: 1375 kVA Year of construction: 1995 (control units upgraded in 2008) Voltage: 400 V RPM: 1500 rpm Steam flow rate: 25 tons /h Dimensions (l x w x h): 4.50 x 2.40 x 2.30 m Inlet temperature: 253°C Inlet pressure : 18 bar Exhaust temperature : 152°C Outlet pressure : 5.0 bar Steam flow rate at the entrance: 25 tons/h Turbine weight: 11,000 kg Generator Brand: Leroy Somer Type: NWR 50 BL10-4P Electrical power : 1015 KW SWITCHBOARD Manufactured by TIL SA and updated in 2008 Schneider control

grinding wheel diameter: 350 mm no. of working stations: 2 grinding wheel width: max. 125 mm work piece support: jeweils 470 x 260 mm dimensions l/w/h: 1,32 x 0,78 x 1,3 m - work piece support can be swivelled - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hot foil stamper, available now, fully workshop refurbished, ready to test • ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps • Step • Centerline for job quick change • Electronic device for sheet travel control • Air conditioning for the electrical cabinet • Gripper bars • Bobst-electronic for managing the machine • Motore principale con variatore di frequenza • Pianale porta-pila con leva per la correzione laterale manuale della pila durante la produzione • NON-STOP FEEDER MANUAL DEVICE • Adjustable lateral blowers with Centerline references • Suction unit with multiple adjusting • Safety system for lowering the pile try • Introduction table covered by antistatic steel stainless plate • Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle • Feed belt slow-down device Ensures  ...

Belt Strapping Machine Strap Strapping Device Manufacturer Mosca Verpackungstechnik Maschinenfabrik Gerd Mosca GmbH 69429 Waldbrunn Type RO-TR500-4 Year of construction 2001 Current connection 3 AC 400 Volt Current consumption 1.5kW 50Hz 2.5A PLC Siemens Simatic OP7 The machine can work both manually and automatically. The conveyor belt brings the packaged goods to the right place and the machine then strapping. Operating states Machine An automatic Open a frame Cut off tape

: 2000 mm Working width: 360 mm Wheel width: 360 mm roll diameter: 60 mm : 800 kg height adjustment: 650 - 950 mm weight of the machine ca.: 0,045 t dimensions: 2,07 x 0,48 x 0,21 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thickness: 16 x 16 mm number: 4 Stähle weight: 3 kg dimensions: 300m x 200 x 50 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is the supporting structure of a dismantled industrial hall (built in 1983) with an original floor area of approx. 2,300 m². The steel frame structure consists of bolted IPE solid wall rolled sections (IPE 550 columns, IPE 450 trusses) and is completely hot-dip galvanized – ideal for the reconstruction of an industrial, warehouse or production hall. Technical key data: Hall width: approx. 24.5 m, length: approx. 93.5 m. Eaves height: approx. 6.3 m | Ridge height: approx. 7.2 m. Supporting structure: hot-dip galvanized steel frame construction (without crane rails / without wall and roof cladding). Documentation: Original statics, plans available. Condition: Dismantled, ready for transport Location: Mayen-Koblenz district (Rhineland-Palatinate) Price: The net sales price of the hall construction will be communicated on written request with complete company da ...

Counting and banding machine ATS US 2000 FSB-DBN-T; State as is; should be installed by ATS Customer Service; suitable for processing banknotes; Rontech MF-360 RAV counting feeder; 1x Banderolier ATS US 2000 AD bandwidth 40mm and frame 260x260mm; 1x Banderolier ATS US 2000 AD Bandwidth 30mmund Frame 260x120mm; Turning unit installed. Count and banding machine ATS US 2000 FSB-DBN-T; condition as is; should be installed by the support of ATS; used for banknotes; count feeder Rontech MF-360 RAV; 1x banding machine ATS US 2000 AD with band width 40mm and frame 260x260mm; 1x banding machine ATS US 2000 AD with band width 30mm and frame 260x120mm; turning station.

pressure: 300 t working feed: 9 / 14 mm/sec stroke: 600 mm column daylight: 1550 mm : 600 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 3000 mm tank capacity: l feed speeds: 9 mm/sec return speed: 14 mm/sec total power requirement: 18,5 kW weight of the machine ca.: 35 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t throat: 800 mm stroke: 630 mm distance between table / ram: max. 1000 mm ram head dimension: 710 x 600 mm table-size: 800 x 1200 mm work height max.: 1015 mm quantity of oil: 1100 l Number of working hours: 7663 h weight of the machine ca.: 15 t dimensions: ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet: ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 45 mm square edge steel: 42 mm L-beam: 140 x 13 mm flat steel: 350 x 20 mm pressure: 550 kN throat: 305 mm notching: rectangle tool: mm total power requirement: 5,5 kW weight of the machine ca.: 1260 kg dimensions of the machine ca.: 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions: 670 x 430 x 870 mm : 670 x 430 mm semi-autom. working: SEMI-AUTOMATIC band length preselection via POTI Band voltage manually via coupling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1100 mm y-travel: 600 mm z-travel: 500 mm Control: Heidenhain TNC 335 B tool taper: SK40 table surface - upper: 1650 x 700 mm table face - lower: 1870 x 300 mm spindle speed:: 3000 Upm spindle motor: ca. 9 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal and vertical milling Position change of the head is done manually Vertical head with drilling quill, drilling depth 100 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2000 /1000 t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a di ...

length: 600 mm width: 500 mm table height: 20 mm Total weight, approx.: 60 kg dimensions of the machine ca.: 0,60 x 0,50 x 0,10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 22.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: SIEMENS 840 D milling head -swivable: 0,001/0,001 Grad milling head: Universalfräskopf 45° Internal cooling system: 20 bar Chip coveyor: ja Tools changer: 30 pos. coolant: 1.100 l Tool taper: DIN 69871A ISO 50 total power requirement: 45 kW weight of the machine ca.: 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /IN ...

5 Rhymes steel external silos Ø 2,800 mm Content 51m³ = 30 tons of flour per silo Height per silo 12,500 mm Silos stand on frame for sale Price on request Phone +49 172 8345457

1 shot blasting machine for paving stones make DISA type BT 125-188 = - Year of manufacture 2000, Beam hours 229, Operating hours 3605 - Permissible document width 12501 mm, permissible. Passage height 500 mm, flow speed 2-10 m/min (infinitely adjustable via frequency converter), belt conveyor center distance 11.7 m, permissible load of the belt conveyor 1000 kg/lm, extracting air volume approx. 125 m³7min, blast wheel diameter 380 mm, blast wheel speed (infinitely adjustable via frequency converter)1800-2800 ulmin, Abrasive recommended gr. S 280; S330, Steel medium requirement for initial replenishment approx. 300 kg, incl. ventilation system

Bartscher combi steamer for 2/3 GN shells, with core temperature probe, with 3 flat 2/3 GN shells and 3 deep 2/3GN shells (see photos), 4 shells of which are new. Current: 230V/50Hz, 2.5 KW with operating instructions

Fully Automatic Horizontal Stretch Winer, Orbital Winder, Bang, BC-40 CA – Used - : Price from location: only 5.950.-€ (net)! Manufacturer: Bang & Co Type: BC-40 CA Year of construction: The BC-40 CA is a fully automatic, horizontal Stretch wrapper for bundling and spiral winding of Products that are fixed to a corrugated cardboard blank should. The machine centers after pressing the foot switch the blank placed on the infeed conveyor fully automatically and feeds it to the rotating bezel. That Format of the cut is automatically detected and one of the ten adjustable wrapping programs conjugated. The feed and rotating ring speeds are adjustable and are controlled by frequency converters. That Product is controlled by the machine fully automatically on the blank fixed and a clamping and cutting system ensures the application and cutting of the film to At the ...

This is an Ultravent hood from the premium manufacturer Rational, type UV 201/E, suitable for the combi steamers SCC, CMP 201 from 10.2011 to current model series. (index H and I), including connection kit. The hood has been tested in our in-house workshop and is fully functional. EIA. Ultravent hood: 4329 € net The price quoted is net plus 19% VAT. Service: We will be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: •6 months warranty on all electrical parts •High-quality brand-name appliances at fair prices •Professional overhaul / inspection & expe ...

Feed tank made of stainless steel with a total capacity of 120 liters. Flat top bottom with flange for feeding and venting. Body with ENDRESS + HAUSER max/min level sensors Conical bottom with discharge from the bottom. About 2 posters Specifications: Volume 120 liters total Background type Conical Envelope 2 posters Outer diameter body 500 mm Body height 600 mm

The container has two saddle feet, a manhole DN 600 with dome lid, is used and emptied inside and professionally cleaned. Dimensions: D = 2.50 m - L = approx. 10.70 m On request, the container can be completely equipped with an extinguishing water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - consisting of: - 1 suction line DN 125 with A-fixed coupling according to DIN 14319 with special closure for fire brigade tricant keys incl. a ball valve 4", - 1 pcs. sleeve incl. ball valve welded into the highest point of the suction line (for ventilation of the suction line), - 1 pc anti-vortex plate mounted on suction line, - 1 pc sign "Extinguishing water extraction point", - 1 pc vent pipe DN100 with hood, - 1 pc bearing tube with dipstick for measuring the level, - 1 pc dome lid with screws an ...

Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm

Soco System packing station system 14800mm Double Deck Roller Conveyor with 800mm Steel Rollers Lower roller conveyor with drive Upper roller conveyor without drive (gravity roller conveyor) 9850 mm Roller conveyor with plastic rollers 600 mm Ø 48 mm with drive and two continuous flaps Curve with conical rollers 90° with two drives for high loads 6000 mm roller conveyor with plastic rollers 600 mm Ø 48 mm with drive 9750 mm Roller conveyor with plastic rollers 600 mm Ø 48 mm without drive 6 x Rocholz Packing and Work Tables System Flex Cardboard magazine Workplace lighting Keyboard and mouse tray with articulated arm Monitor mount with articulated arm 10-way power strip Perforated back panel PC mount Shelf Width 2000 mm Depth: 800 mm 6 x 1000 mm transfer roller conveyor, 600 mm steel rollers 6 x 1000 mm transfer roller conveyor, 600 mm plastic rollers  ...

Storage tank

Vertical condensate accumulator tank made of stainless steel with a capacity of 100 liters. Top klopper bottom with flange type connections. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Material Stainless steel Specifications: Volume 100 liters total Background type Klopper Envelope 4 legs Outer diameter body 450 mm Body height 570 mm

Conveyor belt

Vertical tank made of 316 stainless steel by TM IBÉRICA with a total capacity of 800 liters. Top bottom klopper with off-center flange with agitation, man's mouth and flange connections. Body with visual level. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker TM IBERIAN Model TK-409 Guy DISPENSER Material Stainless steel 316 Year of manufacture 1996 Working pressure on the body: 2 bar Specifications: Volume 800 liters total Background type Klopper Type of agitation 4-blade propeller Agitation motor 0.75 kW - 1.385 rpm Envelope 4 legs Lower bottom tubulatures x1 Man's mouth x1 Breaker x1 Outer diameter body 930 rpm Body height 1000 mm Body height + backgrounds (TOTAL: 3300 mm)

Calderin tank with a capacity of 500 liters manufactured by IBAIONDO. General characteristics: Maker IBAIONDO Year of manufacture 2014 Design and working conditions: Air or water Volume: 500 liters Temperatures: -10/+100 ºC Maximum pressure: 10 bar Test pressure: 15 bar