st used for sale

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 48-8M-30 -Material: Steel -Number of teeth: 48 teeth / Belt width: 30 mm -Mount: Taper clamping bushing Tecnamic 2012-40 Ø 40 x 32 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 128 x 40 mm -Weight: 2.5 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 44-8M-30 -Material: Steel -Number of teeth: 44 teeth / Belt width: 30 mm -Mount: Optibelt 2012-30 taper clamping bushing Ø 30 x 32 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 120 x 38 mm -Weight: 2.1 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: 32-8M-30 -Material: Steel -Number of teeth: 44 teeth / Belt width: 30 mm -Mount: Taper clamping bushing optibelt 1615-30 Ø 30 x 38 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 87 x 38 mm -Weight: 1.1 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 32-8M-20 -Material: Steel -Number of teeth: 32 teeth / Belt width: 20 mm -Mount: Optibelt 1610-19 taper clamping bushing Ø 19 x 28 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 87 x 28 mm -Weight: 0.8 kg/pc.

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine, welding rectifier, electrode welding machine, remote control, hand remote control, welding current regulator -Remote control: Handheld remote control for inverter welding machine/electrode welding machine -Type: unfortunately without a type designation -Cable length: 11.6 m -Transport dimensions: Ø 280 x 90 mm -Weight: 1.9 kg

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, steel rims, rims -Manufacturer: GSL German Standard Lift, 5-hole steel rim -Type: 6.50F-10 ET-17 604700 -Hub bore: Ø 67 mm -Bolt circle: Ø 112 x 15 mm -Quantity: 8x rims available - Price: per piece -Dimensions: Ø 298 x 195 mm -Weight: 7.7 kg/pc.

Impact protection, crash protection, shelf protection, column protection, column impact protection, shelf impact protection, corner crash protection -Impact protection: Shelf impact protection, corner bumper protection -Type: L-shape -Height: 800 mm -Quantity: 4 pieces available -Price: per piece/ complete 195.- €. -Dimensions: 245/120/H800 mm -Weight: 6 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 63 mm -Piston rod: Ø 50 mm -Pipe outer diameter: 75 mm -Stroke: 500 mm -Total length when retracted: 730 mm -Piston rod mount: Ø 44 mm ball head -Hole diameter: Ø 30 mm -Quantity: 5 available -Price: per piece -Ideal for building a hydraulic press

Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable -Width: 280 mm -Height: 750 mm -Depth: 1000 mm -Intermediate dimension: 290 mm -Hole diameter: Ø 60 mm -Laceration teeth -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 340 kg

Punching machine, punching device, hole punching machine, multi-head punch, multi-head punch, punching system -Division: 8 x punch pairs with a spacing of 60 mm (Ø 4 mm) -Distance between the two outer pairs of punches: 975 mm -Spacing: 75 - 165 - 165 - 165 - 165 - 165 - 165 - 75 mm -Max. passage width: 1000 mm -Drive: electric -Weight: 260 kg

Digging bucket, excavator bucket, trenching bucket, ditch cleaning bucket -Width: 300 mm -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm -Laceration teeth -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 100 kg

Mini excavator bucket, digging bucket, excavator bucket, demolition bucket -Width: 470 mm -Height: 470 mm -Depth: 600 mm -Intermediate mounting dimension: 135 mm -Hole spacing: 110 mm -Bore: Ø 35 mm -Laceration teeth -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 80 kg

Digging bucket, excavator bucket, demolition bucket, trenching bucket -Design: stable -Width: 280 mm -Height: 750 mm -Depth: 1100 mm -Intermediate mounting dimension: 165 mm -Hole diameter: Ø 45 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. -Empty weight: 150 kg

Clamping plate with T-slots, plate field, welding table, welding table, plate boring mill -Width: 1100 mm -Length: 1300 mm -Height: 200/100 mm -Working height: 820 mm -with supporting ribs -Groove width: 24 mm -Groove spacing: approx. 100 mm -Transport dimensions: 1300/1100/H820 mm -Weight: approx. 1000 kg

Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg

General SKU225Y106 MakeDeltafilter Serial5454 Year of construction2003 LocationBarneveld Floor space120 x 85 x 175 cm/ 200 kgFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicTea, herbs & coffeeOintmentsGeneric medicinesPowdered foodsPaints & coatingsConsumer wasteOils & fatMiscellaneous filtersDeltafilterIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > SpicesIndu ...

General SKU221Y088 LocationBarneveld MakeRieger Main Features MaterialStainless steel Volume4012 Ltr. Motor1.5 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity4012 l. Vessel sizesø 1800 x 2300 mm Conical bottomcheck Manholeø 420 mm Top connectionscheck OutletDN65 Max. temperature50 °C With propellor stirrer3 fold propellor Motor1,5 kW, 220-230/380-400 volt, 1461 rpm Speed mixing shaft51 rpm MaterialStainless steel 1.4404 General Serial20200536-40 Type4012 l. Year of construction2021 Mounted on legscheck Floorspace1,80 x 1,80 m Total height3,40 m Weight800 kg Extra SpecificationsWith E+H flow meterFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther f ...

General SKU221Y082 LocationBarneveld Specified Features - Miscellaneous Capacity102 kg/h Capacity50 l. With jacketcheck General MakeJordan SerialT5-75.1289/B-21 Year of construction2021 Extra SpecificationsSteam GeneratorPerformance: 75 kWSteam capacity: 102 kg/hOperating pressure: 10 barwith a 50 l. vessel: pressure 11 bar, 5—188 °CFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersMiscellaneousCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicTea, herbs & coffeeOintmentsGeneric medicinesPowdered foodsPaints & coatingsConsumer wasteOils & fatJordanIndustries > Chemical > Fine chemicalsIndustr ...

Used juice bottling line. LINE WITH A CAPACITY OF UP TO 12,000 BOTTLES/HOUR – production capacity for 330 ml bottles 1. Round bottle with a capacity of: - 250 ml – line capacity 9,000–12,000 bottles/hour – round bottle - 330 ml – line capacity 9,000–12,000 bottles/hour – round bottle - 750 ml - line capacity 5,000 bottles/hour - round bottle 2. Twist-off cap: - diameter 43 mm - diameter 38 mm 3. Label types: - cold glue (two-piece) Line configuration: 1. DNB-15 semi-automatic bottle depalletizer. 2. PBSz – 01 - 40 bottle rinser. 3. STORK VS 32 bottling monoblock. 4. AUTOMATIC TWIST-OFF CAPSULATOR with steam injection function, automatic, in-line capping machine (capsulator) model GG100. 5. KRONES BONOMATIC rotary labeler for cylindrical products. 6. VENUS APB-15 automatic bottle packing machine. 7. Videojet CIJ printer – model VJ 1620 8. LOB- ...

General SKU222X105 MakeFerrari No.C2010-024.2 Year of construction2010 LocationBarneveld Main Features MaterialStainless steel Motor7.5 KW Length780 mm Specified Features - Stirrer Dissolver stirrercheck Shaft length780 mm Without stirring headcheck Motor7,5 kW, 230/400 volt, 1420 rpm Wall mixercheck Adjustable height0,37 kW, 230/400 volt, 1370 rpm, 7,9 rpm MaterialStainless steel General With switchgearcheck Floorspace1,00x1,20 m Total height3,25 m Weight2000 kg CEcheck Extra SpecificationsWith 1x mobile drum, dia. 1000x750 mm, output dia. 50 mm, volume 500 ltr.,control cabinetFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoStirrersDairyAnimal feedOther feedConfecti ...

Manufacturer: Steinemann, Type: Nova 220 K, Year: 1994, Control: oben / unten / Bürste / Bürste, Barcode: yes, Monting of the machine: 2200, Double sided sanding line: 1 - 150, Sanding width mm: 2, Sanding hight mm: 2620 x 2300, Sanding belt dimensions: 11, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : 11, Frequency control of belts: 2 x 275 mm, Steel roller: no, Band 1 Leistung kW : 90, Belt 1 shoe unit: 90, Band 2 Leistung kW : 4 - 24, Belt 2 shoe unit: 9, Band 2 Kombiaggregat: 1, Band 2 Queraggregat: no, Band 2 Schleifbandgeschwindigkeit m/s : yes, Band 3 Schleifbandgeschwindigkeit m/s : 2 x 1,1 kW, Year :1994

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as seen, see photos -Condition: the switching elements are missing -Manufacturer: Demag, control switch for crane remote control with cable -Type: DSE -Connector: 16-pin -Transport dimensions: 600/330/H140 mm -Weight: 3.5 kg

Brake for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, multi-disc spring-applied brake, multi-disc spring-applied brake -Manufacturer: Stromag, hydraulic disc spring-applied brake -Output shaft conical: Ø 45 - 40 mm -Input shaft bore: Ø3 2 mm -universally applicable -Number: 2 brakes available -Price: per piece -Dimensions: 220/190 mm -Weight: 16 kg/piece

Steel Holder Head Waldrich Stand Metal Long Planer Slotting Machine Schepping Total weight approx. 100 to 150 kg. Good used condition, worked until the end, only the spur gear at the rear shows signs of wear. The offer is for the head, which is height-adjustable with the handwheel. It was dismantled from the actual machine. The support plate on the boom, which is connected to the large trapezoidal spindle is NOT included. The side head is also still in stock, but NOT included in this offer. With a heavy heart, I dismantled the parts from a superbly preserved planing machine. The machine was in the basement of a machine factory and it was not economically possible to replace this . It was apparently put there earlier and then a wall was bricked up. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act.  ...

General SKU300P642 LocationBarneveld MakeElsto TypeC313F P71 No.735004 Main Features MaterialStainless steel Surface0.49 m2 Specified Features - Screen filter Sieve filterScreen filter Sieve sizesDia. 250mm InletDN55 OutletDN40 Capacity0,49m2 Motor0,15 kW, 400 V., 630/760 rpm MaterialStainless steel General Year of construction2007 Floor space1,3x1,2 M Total height1,8 M Weight180 KgOther chemicalAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesPaper & otherOrganicsFood additivesAnimal feedDyes & pigmentsPlastic & rubberMinerals & inorganicConsumer wasteOils & fatScreen filters-Industries > Chemical > Other chemicalIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed additivesIndustries > Recycling > Paper & otherIndustries > Recycling > OrganicsIndustr ...

Crate washer with incline conveyor We will be happy to plan your machine, and change, supplemented conveyor technology

SILO CELL BLOCK DAM WALL SCREW GALVANIZED Hopper with access hatch IMMEDIATELY AVAILABLE Mob. +491715213204

Head machine LIPPELT, type: Mini Rustica -in bakery condition- - Head machine / dough divider for ciabatta and rustic rolls - With cutting rollers for longitudinal cutting - Including 3 different cutting rollers - with guillotine for the cross-section - including seed station with 2 large plates and 2 smaller plates - The machine has been technically completely tested - Condition: Very good, ready to use - Capacity: approx. 4,000 pcs./h - El. Connection: 3x 400 V, 50 Hz, 1.1 kW The machine can also be purchased without seeding. The head machine is in very good condition and is ready for immediate use. Visits and test runs are possible by arrangement.

Semiautomatic band saw Starret ST-4040 with CE. Cutting capacity round: 280mm. Cutting capacity square: 280x280mm. Cutting capacity rectangle: 280x400mm. Angle cut: Yes. Cutting speed: 15 to 120m/min. Cutting tape: 3550x27x0,9mm. Power: 1,5Kw. Dimensions: 1150x1900x1700mm. Machine weight: 735Kgs. CE: Yes.

GLUING MACHINE, STORK, TYPE: ERT 630 Technical description: Bandwidht: 630 mm Material: Stainless steel Aisi 304 Power supply: 380/440 V - 50/60Hz Dimensions: 1500 x 1200 x 1800 mm

VERTICAL PLATE FREEZER, DYBVAD STÅL INDUSTRI, TYPE: V-4-16 Technical description: Refrigerant: R22 / R502 / R717 Temperature range: - 40 ° C / + 40 ° C Blocks number: 16 or 32 blocks Block size (16x): 820 mm x 76 mm x 800 mm Block size (32x): 390 mm x 76 mm x 800 mm Total dimensions: 2300 x 1400 x 1400 mm

Size: 350 x 500 mm

Pile feeder - Tremat head 4 buckles Anti-noise hood Batch counter Compressor Belt delivery

Stephan MC12 microcut from a company takeover. The cutting ring was equipped with new knives and a new cutter head was installed. After that, the machine was only used a few more times and since the takeover in 2021, it has been standing, which is why the new owner also sold it.

Fully automatic Rotary feeder 1st unit : 6 buckles RFH-82 2nd unit : 4 buckles BUH-82 3rd unit : 4 buckles BUH-66 SPH-70 belt delivery

Checked and cleaned Good working conditions

Neerwaartse persbeweging met zijdelingse belasting - maximale openingsafstand: 400 mm - slag: 400 mm - Tafelafmetingen: 3500 x 3000 mm - De bovenste tafel kan verwarmd worden - De onderste tafel is niet verwarmd - 12 zuigers (diameter 90 mm)

STUART SI505 Incubator Shaker for Microplates Orbital agitation amplitude 1.5 mm Stirring speed: 250 to 1250 rpm for 4 microplates or 2 microtube holders Temperature range (°C): ambient +7°C to 60°C Temperature Resolution (°C): 0.1°C Timer: min/sec, hour/min, day/hour Speed control: digital regulation in 10 rpm increments. Platform dimensions (mm): 220 x 220 Internal dimensions L x W x H (mm): 307 x 300 x 190 External dimensions L x W x H (mm): 361 x 405 x 430 Heating power (W): 200 Power supply (V / Hz / W): 230 / 50 / 300 IP rating: 31 Weight (kg) : 22.5 In excellent working condition

CNC Deep Hole Drilling Machine Shinil (Korea) Year: 2009 Control: Fanuc Oi-TD Key Technical Specifications • Drilling diameter (solid): Ø 50 – 200 mm • Counter boring max: 500 mm • Trepanning max: 500 mm • Max drilling depth: 6000 mm (6 meters) Workpiece & Motion • Z-axis stroke (tool free): 6000 mm • Work spindle stroke (max): 4000 mm • Z-axis rapid feed: 5000 mm/min • Z-axis cutting feed: 0 – 1000 mm/min • Control axis: Z-axis CNC controlled Spindle & Speed Range • Headstock rotation: 5 – 30 rpm • Tool holder spindle speeds: • 50 – 500 rpm • 25 – 250 rpm • 16.6 – 166 rpm • 8.3 – 83.3 rpm Cooling & Drives • Coolant pump control: Inverter-driven • Motor control: NC controlled spindle & tool rotation Power & Installation • Total power: approx. 335 kW • Power supply: AC 440V / 60Hz  ...

Key data: 840 mm, 3000 mm, 490 mm

Circumferential. over bed 840 mm, over cross slide 490 mm Center width 3000 mm Speed range 10-1250 rpm, spindle nose DIN 55022 Gr. 11 Spindle bore 105 mm Feeds 0.060 - 1.4 mm // 0.024 - 0.518 mm Thread metric 1 - 224 mm Drive power 18.5 kW Quill path / cone 220 mm / MK 6 incl. Hardened and ground bed guides, electromagnetic brake of the main spindle mechanically driven upper support, rapid traverse longitudinal/transverse Multifix steel holder, fixed bezel 2-axis digital display,

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070150000 EL -Pmax: bar -Number: 3x valve available -Price: per piece -Dimensions: 236/46/H70 mm -Weight: 2.2 kg/pc.

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070030000 BK -Pmax: bar -Number: 2x valve available -Price: per piece -Dimensions: 236/46/H70 mm -Weight: 2.2 kg/pc.

General SKU262M292 LocationBarneveld Main Features MaterialStainless steel Volume150 Ltr. Motor0.65 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity150 l. Vessel sizesø 500 x 800 mm Dished bottomcheck Dished top sidecheck Manholeø 150mm Top connections2x ø 25 mm Outletø 25 mm With propellor stirrercheck Motor0,65 kW, 230/400 V MaterialStainless steel 1.4571 (316Ti) General Mounted on legscheck Floorspace0,7 x 0,7 m Total height1,9 m Weight220 kgFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicTea, herbs & coffeeOintmentsGeneric medicinesPowdered foodsPa ...

Width 66 cm Year of manufacture 2007 Automatic Paper Folding Machine Computer control with touch screen Flat pile feeder FFH Automation Kit Feeder Double Suction Wheel 1st station: 6 fold pockets 66 cm Automation Kit II Automatic folding pocket adjustment Automatic folding roller adjustment Upstream knife shaft Downstream knife shaft 2nd station: 4 fold pockets 66 cm Automation Kit II Automatic folding pocket adjustment Automatic folding roller adjustment Upstream knife shaft Downstream knife shaft Palamides delta 703 Bundling Machine Delivery date: immediately

Description Rarity for retrofitting and upgrading existing Stahlfolder folding machines or folding units 1st folding unit BUH 66-6 semi-automated from 2006 – upstream knife shafts with protective cover (conversion kit suitable for folding units) – motorized folding roller adjustment – six manually adjustable folding pockets 66cm infeed width – double downstream knife shafts with lift kit

Description 32-page heidelberg Stahlfolder Topline TD 78-6-4-PD with VFZ 52 D and VSA 86 D from 2003 consisting of PD 78-T pallet feeder with tremat and DCT-2000 control 1. Folding unit TD-78 with 6 folding plates 78 cm Downstream cutting shaft Double device 2. Folding unit TD-66 with 4 folding plates 66 cm Downstream cutting shaft equipped with overhauled folding rollers and bearings Mobile folding unit for 32-sided folds Knife folding unit VFZ-52. D

Description Blank connector for Heidelberg Stahlfolder KH or TH folding machines

Description Hazardous Substance Storage – Hazardous Goods Station, Hot-dip Galvanized STW-2VB Storage in accordance with the Water Resources Act (WHG) Approved for the storage of flammable liquids. Side and rear walls closed (solid sheet). Stackable 3 times. Load capacity: 850 kg/m² Dimensions HxWxD 1440x1390x905 Capacity 2×200 l drum Collection volume 225l Weight 150 Load capacity 1000kg

Description Pneumatic altar fold/window fold pocket 56 cm with Acc 2.4 control unit and photoelectric sensor for Heidelberg KH and TH folding machines with motorized pocket adjustment Digital control with ACC 2.4 for exact determination of switching times Up to 15,000 cycles per hour Minimum flap spacing of 0.5-1 mm depending on paper thickness