st used for sale

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump, steering pump -Manufacturer: Bosch, hydraulic pump hydraulic unit from electric forklift Still EFG 1.5/5004 -Hydraulic pump: Type 0 510 415 314 -Engine: Type GP 116-14/5.5 24 V 5.0 kW -Dimensions: 320/200/H220mm -Weight: 36 kg

Marking trolley floor marking device for professional markings Perfect Striper including holder for spare cans, marking device -Manufacturer: AMPERE, floor marking device Super-Striper -Line width: approx. 3 - 10 cm -Number: 3x marking device available -Price per piece -Dimensions: 880/340/H835 mm -Weight: 6 kg/piece

Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, forklift -Fork carriage: with forks -Load capacity: 12,000 kg -Make: Still -Forks: length 1600 mm / 200 x 100 mm -Installation dimensions: see photos -Dimensions total: 3000/2100/H1530 mm -Weight: 2480 kg

electric clutch brake, clutch/brake combination, clutch-brake combination for strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, drive unit for stretch wrapping machine -Manufacturer: Bonfiglioli, drive unit from packaging machine ILAPAK Astra-STD -Type: GFF 200014/112 EE B3 -Motor: 24 VDC / 35 W -Individual components: see photos -Dimensions: 345/180/H230 mm -Weight: 22 kg

Spindle lifting gear, linear drive, linear gearbox, lifting gear, spindle lifting element, spindle drive, electric actuator, valve drive, actuator, actuator motor, strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, spindle lifting gear for stretch wrapping system -Manufacturer: SITI, spindle lifting gear from ILAPAK Astra-STD packaging machine -Transmission: Type MI 30 H9 -Shaft: Ø 20 x 270 mm -Motor: ICME 0.09 kW -Dimensions: 395/265/H120 mm -Weight: 7 kg

Gear motor, electric motor, electric gear motor, spur gear motor for strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, drive unit for stretch wrapping system -Manufacturer: Bonfiglioli, drive unit from packaging machine ILAPAK Astra-STD -Gearbox: Type W63 U P80B14 i= 30 -Motor: 0.75 kW -Speed: 46.6 rpm -Individual components: see photos -Dimensions: 480/350/H250 mm -Weight: 22 kg

Compressors, screw compressor, compressor heating, compressor heating, finned tube radiators, finned tube radiators, finned tube heating - frost guard -Manufacturer: Helios, finned tube radiator from screw compressor BlitzTyp Monsun 7.5 P -Art.No.: 06010021 -Power: 230 V / 1000 Watt -Dimensions: 560/110/H160 mm -Weight: 3.3 kg

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power: 11.4/14.7 kW -Fan: Ziehl-Abegg -Operating pressure: max 10 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 800/710/H730 mm -Weight: 49 kg/piece

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: Prism block for marking plate, clamping plate, straightening bench ... 3 pieces -Prism width: 27 mm / 95° -Dimensions: 3x 160/50/H25 mm -Dimensions: see photo technical drawing -Delivery/Price: complete -Transport dimensions: 160/150/H25 mm -Total weight: 3.9 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: Prism block for marking plate, clamping plate, straightening bench ... 9 pieces -Prism width: 100 mm -Dimensions: 9x 240/125/H63 mm -Dimensions: see photo technical drawing -Delivery/Price: complete -Transport dimensions: 240/250/H190 mm -Total weight: 83.1 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: Prism block for marking plate, clamping plate, straightening bench ... 6 pieces -Prism width: 100 mm -Dimensions: 6x 250/140/H63 mm -Dimensions: see photo technical drawing -Delivery/Price: complete -Transport dimensions: 250/280/H190 mm -Total weight: 75.1 kg

Impact protection, crash protection, shelf protection, column protection, column impact protection, shelf impact protection, corner crash protection -Impact protection: Shelf impact protection, corner bumper protection -Type: L-shape -Height: 400 mm -Quantity: 5 pieces available -Price: per piece/ 95€ for the whole set. -Dimensions: 310/150/H400 mm -Weight: 6.6 kg/piece

Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Handover: in its current condition as inspected -Fan motor: missing -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 -Power: kW -Fan: missing -Operating pressure: max 10 bar -Dimensions: 800/710/H740 mm -Weight: 27 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: GSL (German Standard Lift), hydraulic cylinder stroke 480 mm -Type: E030ZM2 R 16 -Piston rod: Ø 30 mm -Hole: Ø 24 mm -Dimensions: 545/82/H60 mm -Weight: 6 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), Hydraulic cylinder: 480 mm -Type: E030ZM50479 S 49 -Piston rod: Ø 30 mm -Hole. Ø 20 mm -Number: 3x cylinders available -Price: per piece -Dimensions: 605/100/H80 mm -Weight: 6.8 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder, lifting cylinder -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder with valve block -Type: D040025AAV10140 T08 -Stroke: 140 mm -Piston rod: Ø 25 mm -Receiver. Ø 20 mm / Hole spacing 320 mm -Dimensions: 360/200/H80 mm -Weight: 7.6 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV30290 S46 -Stroke: 290 mm -Piston rod: Ø 50 mm -Hole diameter 50 mm / hole spacing 530 mm -Dimensions: 610/145/H220 mm -Weight: 38 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D0630320LV2S01 -Stroke: 95 mm -Piston rod: Ø 32 mm -Hole diameter 30 mm / hole spacing 290 mm -Dimensions: 340/117/H105 mm -Weight: 8 kg.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder stroke 280 mm -Type: E030ZM60279 T18 -Piston rod: Ø 30 mm -mount. Ø 19 mm -Dimensions: 395/83/H70 mm -Weight: 4.4 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV70290 -Stroke: 290 mm -Piston rod: Ø 50 mm -Pipe Ø outside: 135 mm -Hole diameter 50 mm / hole spacing 530 mm -Dimensions: 610/145/H240 mm -Weight: 38 kg

conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: Transport rollers diameter 108 mm -Transport width: 1280 mm -Mountings: Ø 20 mm M12 -Sprocket: 3/4 Ø 82.5 mm / 15 teeth -Number: 44x transport rollers available -Price: per piece -Dimensions: Ø 108 x 1350 mm -Weight: 15.8 kg/pc.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting stroke 280 mm -Type designation: E030ZM3 R 01 -Piston rod: Ø 30 mm -Hole: Ø 20 mm, see photos -Number: 2x cylinders available -Price: per piece -Dimensions: 350/75/H76 mm -Weight: 3.8 kg/piece

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox: Stöber type RD11-1003 -Motor manufacturer: ABB Motors Type M2AA071A -Engine power: 0.37 kW -Speed range adjustable: 64-641 rpm -Shaft: Ø15 x 40 mm -Dimensions: 450/210/H180 mm -Weight: 15.7 kg

Coupling, power coupling, gear coupling, transmission coupling, flange hub for crane undercarriage, running wheel, bridge crane, hall crane, assembly crane, flange hub, coupling star, claw coupling, shaft coupling, clamping set -Manufacturer: Stüwe, clamping set type WK 60-12x60 -Number: 6x clamping set available -Dimensions: Ø 120 x 80 mm -Weight: 4.4 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), double-acting hydraulic cylinder -Type: D120050AAV90185 -Stroke: 185 mm -Piston rod: Ø 50 mm -Hole diameter 40 mm / hole spacing retracted 415 mm -Dimensions: 485/160/H145 mm -Weight: 29.1 kg

Indoor crane, crane, electric wire rope hoist, manual trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, trolley, girder undercarriage, overhead track undercarriage -Crane chassis: with electric drive -Chassis: Type STC 10 load capacity 1050 kg -Gear motor: Leroy Somer 0.25 kW -Travel speed: 22/5.5 m/min -Carrier width: up to 225 mm -Dimensions: see photos / technical drawing -Dimensions: 555/230/H185 mm -Weight: 25.4 kg

Pressing tool, sheet metal former, forming tool, bending tool, folding tool, bending tool, die, die-casting tool -Bending tool: Pressing tool for press brake / press, 5 pieces -Length: 2x 300 mm / 1x 275/200/175 mm each -Groove width: 58/52 mm -Angle: 90° Dimensions: see photos / technical drawing -Price/Fee: complete -Transport dimensions: 450/300/H115 mm -Weight: 48.3 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), single-acting hydraulic cylinder, stroke 170 mm -Type: E0400180H30020 T17 -Piston rod: Ø 18 mm -Tube: outside Ø 50 mm -Hole: Ø13 mm -Dimensions: Ø 50 x 275 mm -Weight: 2.9 kg

Gratings, grating, light grids, insert grids, insert grids, stair treads, safety steps, grating step, step, perforated grating -Grating: hot-dip galvanized steel 1090 x 910 mm 15 pieces -Height: 30 mm -Struts: wall thickness 2/1.7 mm -Bridge height: 30/10 mm -Shipping/Price:complete -Transport dimensions: 1090/910/H445 mm -Total weight: 242 kg

Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank -Manufacturer: Zeidler & Uhl, vacuum container standing, galvanized -Contents: 455 L -Operating pressure: -0.6 bar / max. 16 bar -Accessories: including attachments see photos -Number: 2x containers available -Price: per piece -Dimensions: 860/650/H1610 mm -Weight: 374 kg/piece

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system: -Filter frame: 2190/1460/H2080 mm -Vibration motor: 0.25 kW -Funnel frame: 2235/1440/H2520 mm -Opening: Ø 390 mm / 500 x 220 mm -Individual components: see photos -Weight: 200 kg / 590 kg

Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank -Manufacturer: Zeidler & Uhl, pressure vessel vacuum vessel standing -Contents: 455 L -Operating pressure: max. 13 bar -Accessories: including attachments see photos -Quantity: 1x container available -Dimensions: 1020/755/H1900 mm -Weight: 518 kg/piece

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Stöber HEW, gear motor with brake -Gearbox: Stöber Type DWO-2000-018-4 -Speed: 69 rpm -Hollow shaft: Ø 16 x 85 mm -Engine: HEW RF 63L/4-BO,4 -Power: 0.18 kW -Protection class: IP54 -Brake: 4 Nm -Dimensions: 365/140/H190 mm -Weight: 10.8 kg

Measuring machine, measuring and marking machine, coordinate measuring machine, coordinate measuring machine, form tester, clamping plate, marking and marking plate, measuring plate, measuring table, welding table, welding table, surface plate -Manufacturer: Stiefelmayer Type C-System -Digital display: Stiefelmayer type MZ 2000 -Travel paths: X 2450 mm, Y 1215 mm, Z 1645 mm -with: 6x adjustable feet -Accessories: see photos -Measuring plate: 2000/3000/H355 mm -Dimensions: 2540/3000/H2630 mm -Weight: 4660 kg

Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system: -Filter frame: 1400/1995/H2100 mm -Shaking motor: 0.25 kW -Funnel frame: 1400/1995/H2350 mm -Opening: Ø 500 mm / 500 x 220 mm -Individual components: see photos -Weight: 220 kg / 521 kg

for glass scale, scale, digital display, measuring rod, length measuring system, linear scale, fluorescent display, glass scale, scale, length measuring device, linear scale, positioning display, digital scales, digital scale -Manufacturer: RSF Elektronik, digital display from coordinate measuring machine Stiefelmayer C 100 413514 -Type: Z 735M -Dimensions: 275/120/H170 mm -Weight: 3.4 kg

Interface, data acquisition device, test device, telemetry system, probe interface, printed circuit board electronic module -Manufacturer: Stiefelmayer, circuit board from coordinate measuring machine Stiefelmayer C 100 413514 -Type: 413100-89 -Dimensions: 115/80/H55 mm -Weight: 0.2 kg

Pallet rack, heavy-duty rack, high-bay rack, boltless rack, storage rack stand, pallet rack traverse -Pallet rack traverse: type Stow NS -clear width: 1800 mm -Traverse: total dimensions 1870/85/H230 mm -Shipping/Price: complete -Transport dimensions: 1910/1200/H1040 mm -Total weight: 1053 kg

Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, V-belt drive -Manufacturer: Stankoimport, V-belt drive for tool grinding machine -Type: 36642.M17 -Belt width: 10 mm -Dimensions/recording: see photos -Dimensions: 188/135/H160 mm -Weight: 5.6 kg

Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, holder for tool grinding machine -Type: 36642.M7 -swivelling: up to 105° -Mounting: Ø 35 mm / M16 see photos -Dimensions: 150/140/H85 mm -Weight: 3.9 kg

Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, holder for tool grinding machine -Type: 36642.M26 -Recording: Dimensions see photos -Dimensions: 110/65/H110 mm -Weight: 2.0 kg

Dividing head, spiral milling device, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder -Manufacturer: Stankoimport, holder for tool grinding machine -Type: 36642.M62 -Recording: Dimensions see photos -Dimensions: 195/95/H135 mm -Weight: 2.0 kg

Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, swivel cylinders, tilt cylinders -Manufacturer: Still, hydraulic cylinder, tilting cylinder, double-acting, stroke 50 mm -Type: 654662 -Piston rod: Ø 22 mm -Hole: Ø 17 mm -Number: 2 cylinders available - Price: per piece -Dimensions: 385/68/H85 mm -Weight: 4.1 kg/pc.

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control switch for crane remote control with cable -Type: DST 6 -Connector: 16-pin -Crane remote control: 2 steps below the switch each -Transport dimensions: 870/360/H140 mm -Weight: 6.1 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Morse taper sleeve: taper reducing sleeve -Type: STAS2293-65M-80/5 -Outer diameter: 80 mm -Inside: MK5 Ø mount, see photos -Overall dimensions: Ø 80 x 205 mm -Weight: 5 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 72-8M-20 -Material: Steel -Number of teeth: 90 teeth / Belt width: 20 mm -Mount: Optibelt 2012-30 taper clamping bushing Ø 30 x 32 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 192 x 32 mm -Weight: 4.1 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 64-8M-50 -Material: Steel -Number of teeth: 64 teeth / Belt width: 50 mm -Mount: Optibelt 2517-40 taper clamping bushing Ø 40 x 44.5 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 168 x 60 mm -Weight: 6.8 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 48-8M-30 -Material: Steel -Number of teeth: 48 teeth / Belt width: 30 mm -Mount: Taper clamping bushing Tecnamic 2012-40 Ø 40 x 32 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 128 x 40 mm -Weight: 2.5 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 192 mm -Type: D TB 44-8M-30 -Material: Steel -Number of teeth: 44 teeth / Belt width: 30 mm -Mount: Optibelt 2012-30 taper clamping bushing Ø 30 x 32 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 120 x 38 mm -Weight: 2.1 kg/pc.