134,310 used machines on RESALE, but how to find them? Machine Search
Hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: GSL (German Standard Lift), hydraulic reservoir for the drive of work platforms -Additional parts: see photos -Dimensions: 300/295/H550 mm -Weight: 11.4 kg
Type: VM 1500, capacity: 1500 liters, jacketed tank with agitator, cooling/heating capability, agitator power: 7.5 kW, Rietschle vacuum pump, capacity: 21m3/h, power 1.5 kW, Schema Hydraulik hydraulic pump, power: 1.5 kW, new touch control panel Mixer Indu IMAX 500. Can be connected to a through cutter.
Stedler SAM-BA-MAT E 500 Shrink Wrapping Machine Manufacturer: Stedler Type: SAM-BA-MAT E 500 Shrink Wrapping Machine Operating voltage: 230 V Connected load: 0.75 kW Dimensions: (LxWxH) 1500 x 1170 x 1300 mm More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Tiller head, pedestrian stacker, pedestrian pallet truck, tiller, steering, electric hand pallet truck -Manufacturer: Stier, drawbar complete with drive from electric hand pallet truck SPT-15 -Drive motor: 24 VDC / 750 W -Delivery/price: complete -Dimensions: 1350/380/H355 mm -Weight: 44 kg
Tiller head, control panel, control unit -Control unit: Steering wheel control unit complete for electric forklifts -Type: unfortunately without type designation -Individual components: see photos -Dimensions: 420/220/H240 mm -Weight: 11 kg
Used automatic labeling machine from KOSME model TOP STAR 960 20T S2 E4. New 2003. For paper labels (main and counter) cold glue. The labeling machine is equipped with two stations with label magazines. Each station has five label transfer pads. The carousel is equipped with 20 plates. General overhaul carried out in 2018.
Punching tool for EUROLINE 700 Used, Great condition Punching tool for bolt holder Table width 700mmm Ghost 4-r approx. 16 x 18 Easter chicks 4-r approx. 15 x 16 Heart 5-r approx. 11 x 11cm Boots 4-r approx. 14 x 18cm Moose 4-r approx. 17 x 15cm
Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Wood Screws: Hex Head Wood Screws -Quality: DIN 571 galvanized steel -Sizes/number: M10 x 40 2080 pcs / M8 x 60 800 pcs -Manufacturer: Reyher/Diverse -Price: complete -Total weight: approx. 80 kg
Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed -universally applicable -Number: 3x motors available -Price: per piece -Dimensions: 235/125 mm -Weight: 15 kg/piece
Sturtz welding and cleaning line Left-to-right direction SE-HSM-30/26 Compact 0.2mm 3000x2600mm P-260-WST 4AS-JC WST 25
Key data: 2640 KW, 3300 kVA, 400 V
STAMFORD Synchronous Alternator LVSI 824 F2 3300 KVA 400 V 4763 A 50 Hz, 1500 1/min. Tech. Equipment: - 2 sets of Winding PT100 - AVR MA325, PFC-3 COMPLETELY OVERHAULED, restored, windings impregnated
Distance between points: 1000 mm, Height of the points: 175 mm, Point height: 175 mm, Grinding length: 500 mm, grinding length: 500 mm, Max. diameter to be rectified: 300 mm, Working wheel dimensions (od x id x width): Ø500 x Ø203 x 80/100 mm, Ø max to be rectified: 300 mm, Inner cone: Morse 5, inner cone: Morse 5, Working wheel motor power: 7.5 Kw, Total power: 17 Kw, Longitudinal travel of the carriage (X axis): 267 mm, Transverse travel of the carriage (Z axis): 650 mm, CNC brand: FANUC, cnc brand: FANUC, CNC model: 16-T, cnc model: 16-T, Grinding wheel speed: 0-1670 rpm, Turning range: +/- 8.5º, Dimensions: 2600 mm x 2300 mm x 2100 mm, Weight approx.: 4200 Kg
clamping force: 200 kN injection volume: 80 cm³ screw diameter: -- mm platen size: 350 x 300 mm Condition: used, Specification: C-frame injection moulding machine for TPV - second-hand clamping unit: - Clamping unit: vertical - Tonnage: 20 t - clamping force: 200 kN - Heating platen size: 350 x 300 mm Injection unit: - Injection volume max.: 80 cm³ - Connected load: 3x 400 V, 50 Hz - Pump output: 11 kW - Total output: 44 kW Dimensions L/W/H approx.: 2,000 x 1,500 x 2,500 mm Space requirement approx: 5 m² Weight approx.: 3.200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data approx.: - Max. working width 1020 mm - Max. material thickness at 40 kg/mm², strength 1.5 mm -one. Adjustable back gauge up to 550 mm - Front angle stop - Sheet metal hold-down device - Table size 1100 x 650 mm - Working height 900 mm - Space requirement approx. W 1800 x H 1450 x D 850 mm - Weight approx. 400 kg -mobile
Clamping angle, clamping aid, clamping angle for workpiece clamping -Clamping angle: Clamping aid for workpiece clamping -Bridge thickness: 16/18 mm -Dimensions: 325/247/H115 mm -Weight: 13.7 kg
Gears, spur gears, bevel gears, worm gears -Manufacturer: Stöber, gearbox type K813AG0420SD132S4 -Translation: i = 42.495 -Hollow shaft: Ø 70 x 260 mm -Drive wheel: helical -Bolt circle: Ø 215 mm M12 -M2 perm: 1482 Nm / n1= 1440 rpm n2= 33.9 rpm -Dimensions: 420/290/H410 mm -Weight: 125 kg
Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Steel, lever shears, sheet metal shears with stable base -Cutting length: approx. 325 mm -Overall dimensions: 840/560/H2075 mm -Total weight: approx. 131 kg
grinding wheel size: - mm amount: 2 STK Year: unbekannt 0 Grinding discs- 2 pieces Type Spec. 9A 541 JB U76 Max. RPM 2.360 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Mosca accumulation conveyor STF (timed belt conveyor) Condition: overhauled, serviced, fully functional, ready for use (new bearing, 4 x new transport belts/belts, etc.) Total length 1 meter (2 x 500 mm) Equipped with 2 waiting positions Detection of products by means of 2 integrated photocells Equipped with 2 drives Speed infinitely adjustable by means of frequency converter in the electrical cabinet Equipped with contact plug for pre- and redesigned machine (potential-free, 24V) Documentation: Operating instructions, spare parts catalogue and electrical diagram available If the following machine is not ready, the products are stopped one after the other at the two respective waiting positions. As soon as the release signal from the downstream machine is available, the products are transported on again.
Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Height: approx. 500mm -Groove width: 22 mm -Dimensions: see photo techn. drawing -Number: 2x clamping angle available -Price per piece -Dimensions: 235/100/H500 mm -Weight: 8.9 kg/pc.
ABA Grinding Machine Starline CNC Profile Grinding Machine Surface Grinding Machine Hersteller [manufacturer]: ABA ELB Type [ type]: Starline Control unit: Siemens Sinumerik Incl. handwheel Baujahr[construction year]: 10/2004 Weight [weight]: 6000kg Approx. (W x D x H): 4.1m x 5.1m x 2.5m Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Phone +49 17621834834
Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Height: approx. 500mm -Number: 1x clamping angle available -Price per piece -Dimensions: 220/100/H500 mm -Weight: 12,8 kg/pc.
Flow monitor, flow sensor -Manufacturer: Landis & Staefa, Flow monitor type QVE81.13, unused, original packaging -Technical data: see photo of nameplate -Box dimensions: 305/135/H90 mm -Weight: 0.9 kg
CARVING machine type ANDREONI STANDARD 12 second hand machine working conditions : good Technical details : - rotary device for the simultaneous rotation of the model and the pieces (3D) - manual chuck of mandrins unit - also to work with flat pieces n.12 spindles distance betwen spindles mm. 300 rotation speed by HF converter rpm 6.000 / 12.000 max. working length ( on rotation ) mm. 1900 net weigth kgs. 2500 volt. 380/50 With tools : Yes ( as in photo attach )
Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Cordes, CORWETT pipe-laying device type ZI standard -Gripping width: 300 to 600 mm -Load capacity: 750 kg -Number: 1x gripper available -Dimension: 1000/510/H950 mm -Own weight: 59 kg
Grating, grating, light grating, insert grating, insert grating, stair treads, safety steps, grating step, step -Grater step: 800 x 270 mm -Total height: 70 mm -Struts: Wall thickness 2 mm -Floor height: 30/8 mm -Surface: hot-dip galvanized -Quantity: 1 piece available -Weight: 5 kg
TEXTILE ROTARY PRINTING MACHINE; STORK RD4 MAKE : STORK TYPE : RD-IV NO.OF COLORS : 8 YOC : 1985 , RENEWED / MAJOR OVERHAUL 2008 WW : 1850 MM HEATING : STEAM WITH FLUFF REMOVER TYPE : STORK TYPE SU-II/1850 DRYER : 6 CHAMBERS
STORK LASER SCREEN ENGRAVING EQUIPMENT ( ROTARY TEXTILE PRINTING ) LASER ENGRAVER MAKE : STORK TYPE : STK-2000 YOC : 1988, RENEWED / MAJOR OVERHAUL 2012 LENGTH : 310 CM WITH END RING GLUING UNIT TYPE : STORK SCR-85 LACQUER COATER : TYPE : STORK RSE 3100, Q4B1/2000 YOC : 2000 2 DRYING UNITS SCREEN INSPECTION & WASHING EQUIPMENT COOLING SYSTEM SOFTWARE & HARDWARE FOR ENGRAVER PIPING, DUCTING, CABLING ETC ONE LOT OF SMALL EQUIPMENT USEFUL FOR SCREEN PRODUCTION
Gratings, grating, light grids, grid inserts, grid inserts, stair steps, security steps, grating step, step -Grid step: 1200 x 240 mm -Total height: 70mm -Struts: wall thickness 2 mm -Bridge height: 40/10 mm -Gratings: hot-dip galvanized -Number: 6x grids available -Price per piece -Weight: 8 kg/pcs
T-slot plate, clamping plate with dovetail slots, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Opening: 150 x 100 mm -Groove width: 18 mm -Hole spacing: 200 x 250 mm, Ø 14 mm -Dimensions: 480/350/H60 mm -Weight: 66 kg
Motor 1.3 kW/400 V/50 Hz/3 A, swivel -20° to +70°, pneumatic clamping, suction nozzle 80 mm
Patent high mass -Instruction manual -marking angle
Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile racks, support arm trolleys -Transport trolley: commission trolley, double-sided support arm trolley -Total length: 1500 mm -Width: 1175mm -Height: 1920mm -additional holders: see photos -Weight: 70 kg
Heidelberg / Steel TI 52-4 Year of Make: 2001 Flat pile feeder 4 fold pockets HHS gluing device Hook-in shed display
rack, toothed rail -Rack: Toothed rail, straight teeth -Length: 1000 mm -Width: 60 mm -Height: ha 60 mm -Module: 6 (see photo) -Dimensions: 1000/60/H60 mm -Weight: 25.1 kg
Winch rope, crane rope, hoist rope, wire rope, clothesline, PVC wire rope -Wire rope: Steel rope PVC coated -Type: 6x7 FC PVC transp. -Rope nominal diameter 4.0 / 5.0 mm -Length: 102 m -Quantity: 2 pieces available -Price: per piece -Weight: 6.6 kg/piece
Description Forklift / LPG forklift Still R70-16t Details Lifting height: 3,000 mm Operating hours: 3,282 h Forks: Hand adjustment technically in order, roadworthy, drive unit overhauled
"EIAA x BATES :: Certified Preowned" We can offer you permanently revitalized filling systems for all areas of application. OFFER: Behn+Bates filling line for valve bags (valve packers, air packers) with internal or external valves, made of paper or PE. Machine was completely overhauled in 2024: New pneumatics New electrics New control system (Siemens LOGO!) - manufacturer-independent New software - manufacturer-independent New weighing electroni (B+L dataPond 3F, high-speed, legal-for-trade) Parts made of stainless steel that come into contact with the product (product flap, pressure chamber, filling tube) Scissor Locker - Conversion to BATES Flap Dosing Possible Filling tube for 135mm valve width - conversion to other valve width possible Everything new except for steel construction - steel construction powder-coated in the colour of your choice o ...
Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, vibration dampers, spring elements -Manufacturer: Stop Choc, vibration damper 3 pieces, for machine tools and systems -Type:V 45-WH Ø 145 mm -Height: 240 mm -Price: complete -Weight: 3.2kg/piece
Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surfaces: 300 x 160 x 20 mm / 300 x 200 x 30 mm -Dimensions: 300/160/H200 mm -Weight: 18 kg
Height 2050 mm Width 1500 mm Length 3150 mm Type of breading breading dry breading machine
Fully automatic system for filling nested disposable syringes and closing with plunger stoppers, consisting of 4 Bausch+Ströbel components: TUM 9070 Tub unpacking machine for removing the cups from the bag using a sliding device DVE 9070 Cover and protective film removal SFM 5072 Filling and sealing machine NTS 8140 Transport system Output max. 36,000 disposable syringes/h, infinitely adjustable For disposable syringes 0.5 - 10 ml depending on format set For plunger stoppers diam. 5.00 - 21.00 mm, H 7.00 - 15.00 mm depending on format set For 100 mm nest For tub H max. 130 mm Parts in contact with the product made of stainless steel AISI 316L IQ/OQ qualification documentation in accordance with Annex D5 GAMP 5 and Annex 15 EU-GMP in English Calibration (KAL) for all process-relevant measuring systems Material specification PLC Siem ...
Key data: 3100 mm, 2100 mm, 1000 mm
First commissioning: 2024 Control: OSAI Arbeitsbereich / Working Ranges X-axis: 3,100 mm Y-axis: 2,100 mm Z-axis: 1,000 mm Clamping table: 3,100 x 2,100 mm T-slot spacing: 250 mm Table load: 1,000 kg Milling unit: Spindle power:10 kW Spindle speed: Max. 24,000 min-1 Torque: 10.9 Nm Tool holder: HSK 63F Drives Linear Axes Feed speed X/Y axis: up to 40 m/min Z-axis feed speed: up to 25m/min Electrical connected loads: Voltage: 400 V Frequency: 50 Hz Fuse: 45 A Power requirement: 35 kVA Dimensions & Weights: Machine space requirements: approx. 4,800 x 5,000 x 4,300 mm Total weight: approx. 6.5 tons Colour: light grey Auxiliary: - 15-fold tool changer - Mobile control panel Machine Condition: New Availability: Immediate - subject to prior sale
Key data: 4000 mm, 2700 mm, 1250 mm
Year of manufacture: 2024 Steuer / Control: Heidenhain TCN640 inkl. HR520 Handrad - handwheel Arbeitsbereich / Working Ranges X-axis / X-axis: 4,000 mm Y-axis / Y-axis: 2,700 mm Z-axis / Z-axis. 1,250 mm Clamping table: aluminium table with T-slots at a distance of 250 mm Milling Unit / Milling Head Spindle power: 22 / 25 kW Spindle speed / rotation speed: Max. 24,000 min-1 Drehmoment / torque: 18 Nm Tool holder: HSK 63A Drives Linear Axes / Feed & Acceleration Feed speed X/Y-axis / max feedrate X/Y-axis. Up to 60/40 m/min Feed speed Z-axis / max feedrate Z-axis: Up to 35 m/min Electrical Connection Values / Electronic Consumption Spannung / voltage: 400 V Frequenz / frequency: 50 Hz Fuse / current power: 45 A Power requirement / power required: 25 kVA Dimensions & Weight & Dimensions: Required space: approx. 9,100 x 5,100 x 4,400 mm Total weight / ...
power capacity: - kW volt: - V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Punch power: 400 kN table surface area: ca. 1250 x 700 mm throat: 500 mm hole punching press: capacity (dia. x thick.): 100 x 3 mm hole punching press: capacity (dia. x thick.): 75 x 4 mm hole punching press: capacity (dia. x thick.): 30 x 10 mm x-travel: 700 mm y-travel: 470 mm total power requirement: 4 kVA weight of the machine ca.: 2 t dimensions of machine L x W x H: 1,50 x 1,72 x 2,00 m Accessories: tool cabinet with various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 4700 mm, 6100 mm, 1470 mm
Portal milling machine with fixed portal and 2 separately movable machine tables for pendulum machining. The tables can be coupled to form a large table. Designed for the typical applications in model and mould making and in the machining of (small) series parts with high efficiency. In addition, the machine can be equipped with a zero-point clamping system for quick replacement of clamping fixtures or prepared parts. Areas of work: X-axis: 4,700 mm Y-axis: 6,100 mm Z-axis: 1,470 mm A-axis: ± 115° C-axis: ± 360° Control: OSAI Openkey 2-axis milling head with spindle: Spindle power: 15 kW Spindle speed: max. 24,000 min-1 Torque: 20.9 Nm Tool holder: HSK 63F Tool tensioning: pneumatic blowing air / MQQ: outside Clamping table: Clamping surface: 2 x 1,950 x 2,500 x 213 mm (coupled: 4,000 x 2,500 mm) Aluminium with grid threaded holes Max load: 1000 kg distributed over th ...
Chip press for the recycling and compaction of plastic chips (which are shredded if necessary) from machining by converting them into cylindrical briquettes. When it comes to disposing of PU or EPS chips, the Styrotec briquetting press saves a lot of money and increases profits by turning waste into a resource. The chip press can be installed both indoors and outdoors. Briquette diameter: 55 mm Hopper dimensions (diameter): 1000 mm Throughput: 30-75 kg/h Motor pump power: 5.5 kW Dimensions of the briquetting press: 1,100 x 1,460 x 1,600 mm Weight: 565 kg
maximum number of results exceeded
please refine your search
