st used for sale

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 685 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 320/175/H220 mm -Weight: 17 kg

Replacement blades for cutting machines -Manufacturer: Stumabo -Blade size: 127x25.4x1.5 2GØ10.4 (90°) -Quantity: 25x available -Price: per piece -Minimum order quantity: 3 pieces -Weight: 25 g

Replacement blades for cutting machines -Knife size: 205x125x1.47 -Type: 676 FB99262 -Number: 18x available -Price: per piece

Stephan MCH10/2 Microcut, continuous cutter, colloid mill, coial mill, ultrafine shredder Machine in neat condition Voltage: 400V Power: 4000/4500W Speed: 1415/2920rpm neat and smooth running Machine must be thoroughly cleaned before use Cutting gap: 1.3mm The machine was operated "inline" by the previous owner, so there is no circulation device, but this can be easily built with DN50 milk thread screws. Video about test run available

Replacement blades for cutting machines -Knife size: 205x63x1.47 -Type: 675 FB99261 -Number: 5x available -Price: per piece

Replacement blades for cutting machines -Brand: Stumabo -Blade size: 190x50x5 mm -Type: 2114662 -Number: 162x available -Price: per piece -Minimum order: 3 pieces -Dimensions: 190/50/H5 mm -Weight: 0.27 kg

4. Qty. 1 Second-hand Monoblok Mfc.: Stork Bepak BV Type: VS 60/110/12LV Built: 1992 Carousel monoblock 60 pourers 12 closing heads Fill inspector Missing cap Capacity: 20 000 bottles/h Sizes: 250, 500, 700, 750 ml

Three-phase motor, electric motor -Power: 0.09 kW -Speed: 1330 rpm -Shaft: Ø 9 mm -Design: B3 -Protection class: IP 44 -Dimensions: 190/147/H110 mm -Weight: 4 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: drive heart, three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 210 mm -Short taper: 5 (82.5 mm) -Number: 2x discs available -Price: per piece -Weight: 5 kg

Stork Werkspoor TM 410 Cylinder heads 18 pcs available Withouth cracks or weldings water pressure tested 100% genuine, Original heads

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Number: 1x prism -Price: complete -Dimensions: 210/85/H226 mm -Weight: 14 kg

Gear motor, electric motor, three-phase motor -Speed: 84 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 33/E -Dimensions: 350/170/H180 mm -Weight: 16.2 kg

Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.18 kW -Construction: B3 angle -Diameter shaft: 16 mm -Protection class: IP 33 -Dimensions: 235/185/H120 mm -Weight: 4.9 kg

Gear motor, electric motor -Speed: 13 rpm -Power: 0.11 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Number: 1x geared motors available -Price: per piece -Dimensions: 380/170/H180 mm -Weight: 17.5 kg

Gear motor, electric motor -Speed: 61 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Price: per piece -Number: 8x available -Dimensions: 405/140/H180 mm -Weight: 14 kg

Gear motor, electric motor -Speed: 62 rpm -Power: 0.75 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 430/160/H200 mm -Weight: 16.7 kg

Gear motor, electric motor, electric gear motor -Speed: 304 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 44 -Dimensions: 380/200/H190 mm -Weight: 15.7 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Roller diameter: 80 mm -Transport roller width: 490 mm -Total length: 520 mm -Shaft diameter: 12 mm -Number: 109 rolls available -Price: per piece -Weight: 2.3 kg/piece

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 115 mm -Transport roller width: 380 mm -Total length: 420 mm -Shaft mount: 40 mm -Two-edge: 25 mm -Number: 4x rolls available -Price: per piece -Weight: 12 kg/piece

Hand lever scissors, hand tin snips, tin snips, sheet metal snips -Hand lever shears -Material thickness: max. 2 mm -Blade length: 200 mm -Dimensions: 790/540/H1715 mm -Weight: 28 kg

Model: STG 230 GANC Type: SR-230 No. SR-230/070/199 Connection: 3x400V EL Box: ASTP

Shaftless Unwind Monomatic Typ MD 107 (150 mm core diameter) FIFE side edge control max. roller diameter 1,070 mm Web tension control device Multiple breaking device Trimming station Cutting accuracy +/-0.2 mm Automatic angle adjustment Automatic sheet length adjustment without gear change Working width up to 1250 mm min. Working width 600 mm, cutting length from 550 to 1500 mm Materials from 60 g/sqm to 150 g/sqm (unwinder max. 120 g/m2) Ionisation device Waste ejection station Shingled delivery Belt delivery extended to the end of the stack Counting device Pile delivery with jogger max. mechanical output 300 m/min Cerutti embossing station - suitable for surface embossing (steel - paper 1 : 1.85) Embossing calender output max. 250 m/min

Vacuum cutter VK 125 STL bowl 125 l, knife speed from 300 to 4200 rpm., Ejector hydraulic, without feeding, 6 cutter head, Busch vacuum pump, connected load approx. 40.0 kW Vakuum bowl cutter VK 125 STL,, Bowl volume 125 l, knife speed from 300 till 4200 rpm., unloader, without loading system, knife head with 6 knives, Busch vacuum pump, Power approx. 40.0 kW

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 16 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 1x available -Weight: 3 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 38 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 1x available -Weight: 7 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 6 mm -Length: approx. 33 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 4x available -Weight: 6 kg

Waste press Strautmann RC 1100TT after renovation Specifications Maximum pressure: 4 tons Use for: 1100 L Power supply: 230V/1.5 kW Year of construction: 1996 Price: on request If you have any questions, please call us: +48 696 072 985

Geared motor, electric motor, three-phase motor -Speed: 64 rpm -Power: 2.2 kW -Design: B3 -Shaft diameter: Ø 60 mm -Protection class: IP 33 -Dimensions: 680/295/H420 mm -Weight: 103 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Beam width: 100-150 mm -Payload: 1000 kg -Number: 1x drives available -Price: per piece -Dimensions: 370/405/H340 mm -Own weight: 47 kg

Used monobloc made by Stork Bepak b. v. Bottling & Packaging System: Utrecht Netherlands type VS 60/110/12 LV. New 1992. Specification: - 60 pourers, - 12 closing heads, - Filler and cap inspector, - Capacity 20,000 bottles/hour, - Contents: 250 ml., 500 ml., 700 ml., 750 ml.

Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: stable -ripping teeth -Width: 790 mm -Height: 500 mm -Depth: 700 mm -Socket: Ø 40 mm -Width inside: 150 mm -The mounting on the spoon can be changed by us at an additional cost -Own weight: 108 kg

Used carton machine by Stork Bepak b. v. Bottling & Packaging System: Utrecht Netherlands type S.A.-25. New 1998. Can form corrugated cardboard boxes in a wide range of dimensions. During transport from section B to section C, an applicator (from Nordson USA) of hotmelt glue (granules or flakes) applies heated hotmelt glue under high pressure in strip form to the vertical dan tabs of the carton. Capacity: 25 cartons/min. Installed power: 8 kW.

Backhoe bucket, excavator bucket, demolition bucket, trench bucket, excavator bucket -Execution: stable -Width: 595 mm -Height: 680 mm -Depth: 700 mm -Admission intermediate dimension: 180 mm -Bore mounting: Ø 51 mm -The mounting on the spoon can be changed by us at an additional cost -Net weight: 152 kg

Backhoe bucket, excavator bucket, demolition bucket, trench bucket, excavator bucket -Execution: stable -Width: 485 mm -Height: 450 mm -Depth: 620 mm -Admission intermediate dimension: 141 mm -Bore mounting: Ø 40 mm -The mounting on the spoon can be changed by us at an additional cost -Own weight: 90 kg

Gear motor, electric motor -Speed: 15 rpm -Power: 0.18 kW -Construction: B3 -Brake -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Dimensions: 450/200/H200 mm -Weight: 23 kg

Grain dryer made of ALU two-column MDB-T 2/9, indirect air heater 2500 KW, heating oil, 2 circulating air fan, exhaust air, dedusted, Weishaupt, trapezoidal cladding Tel. 01715213204

Chuck flange, flange mount, lathe chuck flange, drive flange -Feed flange for: drive heart, three-jaw chuck, four-jaw chuck, faceplate -Outer diameter: 185 mm -Short cones: 6 -Quantity: 1x disc available -Weight: 4 kg

Three-phase motor, electric motor, agitator, mixer -Motor for: agitator -Power: 8.5 kW -Speed: 1450 rpm -Hollow shaft: Ø 68 mm -Construction: B5 -Protection class: EX -Dimensions: 425/390/H360 mm -Weight: 116 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 705 mm -Thickness: 25mm -Recess: 270 mm -Short cone diameter: 192/217 mm -Hole circle: Ø mm -Weight: 71 kg

- Content: 68 + 7 HL - With vibrating spout - 3 side elevation of the hopper - Lifting frame, max. lift: 1000 mm - Max. discharge height: 2150 mm - Machine only very little used - In very good condition Dimensions : - Hopper length : 4740 mm - Width : 2200 mm - Hopper height : 1440 mm

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer: Ø 748 mm -Rezess: 350 mm -Hole circle: Ø 600 mm -Weight: 100 kg

Gear motor, electric motor -Speed: 40 rpm -Power: 9 kW -Construction: B3 -Diameter shaft: Ø 80 mm -Protection class: IP 33 -Dimensions: 1000/385/550 mm -Weight: 260 kg

Machine vise, sturdy vise, drill vise -Vise: rotatable -Jaw width: 160 x 45 mm -Clamping depth: max. 250 mm -Dimensions: 470/290/H160 mm -Weight: 40 kg

Three-phase motor, electric motor, agitator, stirring device -Motor: for agitator -Power: 5 kW -Speed: 960 rpm -Hollow shaft: Ø 68 mm -Flange: Ø 360 mm -Protection class: EX -Dimensions: 420/360/H385 mm -Weight: 113 kg

Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -comes from a Still forklift -Drive: 40 V 2.5 kW -Dimensions: 340/225/H300 mm -Weight: 32 kg

Punch holder, die holder, punching tool, punch, punching die, punching punch -Matrix size: 13.7 mm -Matrix holder: for punching in the legs -Dimensions: 200/120/H90 mm -Weight: 8.7 kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -only one tool available (counter tool missing) -Shearing tool for channel steel: 30 mm, 60 mm -Type: 441216084902 -1x dimensions: 210/220/H30 mm -Weight: 9.9 kg

Steering cabin for gate, suspended movable Stock No.: aso879 Make: Möhringer Year of construction: 1994 Machine number: M9401 Dimensions: Width: 2.80 (m) Depth: 1.70 (m) Height 1.90 (m)

Profile steel knife, shearing tool, cutting tool, separating tool, punching tool, punch, punch die, punch punch -Shearing tool for T-steel: 120 x 70 mm -Square: 25 mm -Round: 27mm -Type: 50305 -Dimension respectively: 175/140/15 mm -Weight: 5kg

Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for U-steel: 80 mm -Type: 441215124701 -Type: 441215124702 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg