ssi schaefer pr used for sale

Ex proofed compressed air diaphragm pump, DH25-FA-1NN-M, DEPA, used Top Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - Excellent condition The part was purchased from a company's spare parts warehouse and is in almost new condition. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our we ...

L 22 Kw POWER 330 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 22 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

various twin press impregnation, plate size ~32cm x 45cm, a good condition, immediately available

Schmedt - PräRund - PräDeck - PräKant - Concise, in good condition, immediately available

SHIKI Model PC 30, year of construction 1980, 1x letterpress (2 colors); lamination unit; punching unit; Longitudinal section, 2 hot foil plates, in good condition, immediately available

Precision planetary gearbox, i=8, PLFHP140-008-SSSE3AK-E38, Neugart, new Please note: This is an original Neugart product and not a replica from Special price If you have a VAT number, we will gladly issue you an invoice without VAT. New! The part was purchased from a company's spare parts warehouse, is in its original packaging, has never been used and is completely new. Drive side: Hollow shaft D 50 mm, centring 180 mm, pitch circle 215 mm, z=4, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law appl ...

Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Konica Minolta development machine (wet) SRX-101 A • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Frame press Hess Technical description: - 2 pneumatic pressure cylinders in length - 2 pneumatic pressure cylinders in width - 2 pneumatic workpiece holders - Feed bandwidth: approx. 680 mm - Feed belt length: approx. 3,400 mm - Clamping area: 680 x 1,400 mm - Control panel Dimensions: - Length: approx. 3,400 mm - Width: approx. 1,700 mm - Height: approx. 1,400 mm - Weight: approx. 800 kg

Garant Oil Cabinet 145x72x75cm Execution: Stable sheet steel construction with reinforced hinged doors, lockable by push handle with pin cylinder lock. The cabinet body is equipped with an individual pull-out protection. Due to the individual pull-out protection, only 1 pull-out shelf can be opened at a time. The cabinet is thus largely secured against tipping. Mounting of pull-out shelves and drawers in 25 mm increments. Oil cabinet equipped with plastic oil canisters Drawers/pull-out shelf Load capacity: 200 kg Drawer extension (partial/full extension): 100 % Drawer pull-out: Pull-out lock Height adjustment in grid: 25 mm Pin cylinder lock: modular insert HxWxD=145x72x75cm without key Item condition used RRP 3240,- € You can find more control cabinets - new and used - in our shop! International shipping costs on request!

Available in stock 1 x Used Kiene Cylinder Pressure Indicator Model K-107. Indicator equipped with a 4” diameter, dual range (0-3000 PSI/0-210 Bar), liquid-filled bourdon gauge with an FRP case. Indicator furnished complete with a carrying case. Design Features: - Quick attachment to standard indicator valves; - High accuracy, liquid-filled, dual scale pressure gauge; - Minimum space required for installation; - Components designed for low maintenance, long life operation. The equipment is used but in good working conditions.

Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16

Frame Press - Edge Press Standing / Vertical workpiece dimensions - Solder: 2500mm - Width: 1250mm Press pressure motorized, 3-stage

• Designation:Infeed • Type / Model: 3738.0400 • Year of manufacture: 2019 Find more here - / Contact us at -

Available in stock 5 x Used Capstone Smart Proportional Valves. We have the following units available: - 3 x SPV Assy P/N 503044-200 complete with gaseous fuel valve P/N 506617-100 (Op. Press. 50 PSIG / Proof Press. 3500 PSIG); - 1 x SPV 25 24VOLTS P/N 511978-100R complete with gaseous fuel valve (Op. Press. 0-100 PSIG); - 1 x GSPV 12VOLTSD P/N 509736-100 complete with gaseous fuel valve (Op. Press. 75 PSIG / Proof Press 3500 PSIG): The unit are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

technical details: - suitable for heavy starting machines - 18 l large tank = long running time - electronic voltage regulation (AVR) - Thermo-magnetic circuit breaker against overload and short circuit due to defective loads and cables - Insulation monitoring = safe personal protection - Oil deficiency shutdown - E-Start = high comfort Metrics: - Length: approx. 842 mm - Width/depth: approx. 523 mm - Height: approx. 557 mm - Weight: approx. 96 kg Drive: - Engine: Honda GX 390 - Power factor: 0.9 cos ɸ - Starter: E-Start / Hand Start - Type of fuel: Gasoline - Tank capacity: 18 l - Consumption at 75% load: 2.2 l/h - Sound pressure level Lp: 72dB(A) - Sound power level Lw: 97 dB(A) Generator: - Type: Synchronous - Rated voltage: 230 V - Apparent power at LTP: 7.2 kVA - Active power at LTP: 6.4 kW - Apparent power at COP: 6.0 kVA - Active power at COP: 5. ...

Vertical baler HSM VL 600, built in 2002 Specifications: Manufacturer: HSM Type: HSM VL 600 Year of Make: 2002 Pressing force: 60 t Drive power: 7.5 kW Idle cycle time: 37 s Filling height: 1130 mm Filling opening: 1150 x 735 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Weight: 3575 kg Materials: paper, cardboard, foil Remark: The instruction manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale is made ex location, without guarantee and guarantee. Our payment term is 100% prepayment.

Used bread press FORTUNA, automatic size 4 -Refurbished- - Fully automatic bread roll press - 30 troughs per plate - Weight range: 40 - 110g - for 3.300g dough total - incl. new stainless steel knives - automatic head - with effective cut-off (only cutting - no rounding) - Condition: very good, ready for immediate use - 6 months warranty - Video on request The machine has been completely overhauled and is in very good condition. A visit is of course possible by arrangement.

IZAN MAKINA IZFORM IZ5 roll forming line was built in 2019 in Turkey by İzan Makina – İmalat İnşaat İç ve Dış Ticaret Limited Şirketi. This line, distinguished by the use of the state-of-the-art technology available on the market, is designed for frame constructions. Its extensive machining capabilities allow for the precise, fully automatic forming of C- and U-type cold-formed profiles of various dimensions. These elements are used, among others, in partition walls and bathroom modules. The IZAN MAKINA IZFORM IZ5 profiling machine is offered with extensive equipment, including advanced BIM software and a sheet metal decoiler with a maximum capacity of 3 tonnes. The IZAN MAKINA IZ5 rool forming machine is currently configured for the production of C75x1.2mm and C100x1.2mm profiles. The production cycle is performed by means of a reliable tool head with the following machini ...

ELECTROMASHSTAN EMC-SP/3/05 Sigma roll forming line was built in 2019 in Ukraine by ElectroMashStan. The line is designed for the production of precision Sigma-type cold-formed profiles, which are used in among others steel structures, load-bearing elements and supports. The production cycle is fully automatic, thanks to the use of an automatic sheet decoiler. The strip with a maximum thickness of 3 mm is uncoiled towards the workspace, where it is formed using rollers. The ELECTROMASHSTAN roll forming line offered is fully complete. Applications for Sigma profiles: – steel constructions (halls, warehouses, industrial buildings) – prefabricated buildings and light steel construction systems – load-bearing elements (girders, columns, beams) – brackets, bracing and structural frames – wherever a high load-carrying capacity is required in a relatively lightweight construct ...

Concrete block production plant complete Fabr. Locksmith type SP 3000 with core and attachment control Siemens S 7 Lifting ladder, vehicle group, racking system, sinking ladder, packer, strapping mixing plant various accessories. The plant is still in operation and can be visited in consultation with us.

Ground precision ball screw, D50 mm, 1143 mm, Steinmeyer, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 3526.508/30.50.900.1143 E T3, D50 mm, 1143 mm, Z-Nr. 3-30-900-0-3-01, Fa. Steinmeyer Ball screw diameter 50 mm, Pitch 30 mm, Length of thread 900 mm Length of ball screw nut 209 mm, Max. total stroke 691 mm, Total length of the spindle 1143 mm Diameter for coupling with motor 38 mm Attention! With 2 mounted roller bearings! Outer diameter bearing A 80 mm, outer diameter bearing B 52 mm Functional guarantee! We cannot pr ...

3× Briquette press Di Più MB100 – built in 2009 – complete line with saws & accessories For sale are 3 pieces of briquette presses of the type Di Più MB100, built in 2009, including saws, conveyor technology and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, shavings and wood residues. ⸻ Technical data (per machine): Type: Di Più BRIK MB100 Year of Make: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Grain size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press ⸻ Equipment: Material hopper Screw conveyors Hydraulic Cabinets Saws for briquette length cutting ...

3× Briquette press Di Più MB100 – built in 2009 – complete line with saws & accessories For sale are 3 pieces of briquette presses of the type Di Più MB100, built in 2009, including saws, conveyor technology and other accessories. The machines come from industrial use and are ideal for the production of wood briquettes from sawdust, shavings and wood residues. ⸻ Technical data (per machine): Type: Di Più BRIK MB100 Year of Make: 2009 Briquette diameter: approx. 90 – 110 mm Production capacity: approx. 1,300 – 2,300 kg/h Press pressure: approx. 2,000 – 2,500 kg/cm² Main motor: 75 kW Total power: approx. 98 kW Material moisture: optimal 8 – 12 % Grain size: approx. 1 – 12 mm Weight: approx. 7,800 kg per machine Drive: hydraulic piston press ⸻ Equipment: Material hopper Screw conveyors Hydraulic Cabinets Saws for briquette length cutting ...

For sale is a bread press with a weight range of 30-100g. Partial and circular moulding agents Electronic control with memory for 10 products Incl. 3 knitting plates

Ground precision ball screw, D40x20, 1600mm, Rexroth, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 1586-4-7212, D40 x 20/25, 1600 mm, Fa. Rexroth, Ball screw diameter 40 mm, Pitch 20 mm, Length of thread 1415 mm Length of ball screw nut 87 mm, Max. total stroke 1328 mm, Total length of the spindle 1600 mm Diameter for coupling with motor 24 mm Diameter bearing seat A 30 mm, Diameter bearing seat B 28 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give y ...

Shrink Wrap, Front shuttle feeder, Rotary side feeder, Friction feeder, Shrink tunnel, Maximum Speed: 85 cycles per minute, Length: 85 to 395 mm, Width: 85 to 300 mm, Height: 2 to 70 mm

Qty. 1 Second-hand Copper Strip Production Plant – Still in Production Mfc.: J. F. Norton, Shinkwang Tech, Partec, Rozai, Chungwon Control & Sunil, Handuck R-FECO, Mirae Tech Inc., Changjo, Wuishi, Youngchang Machinery, Dongshin Tech., Sonoda Engineering Co., Wuxi Longar Mach., Backsan Machinery, Youngdong Coil Center, Deakwang Machinery, Hanguk E.N.G, Built: 1962, 1965, 1990. 2000, 2001, 2008, 2017, 2018, 2019, 2020 Revamping: 2017, 2019, 2020, Scope of supply: Roughing Mill Mfc.: Famer Norton Type: 4-Hi Irreversible – WR Drive 318 x 610 x 635 mm Built: 1965. 06 Revamping: 2017. 09 by Shinkwang Tech Strip width: 200 – 530 mm Thickness: 3.0 – 12 mm Intermidiate Mill Mfc.: Shinkwang Tech Type: 4-Hi Irreversible, WR Drive - 225 x 570 x 720 mm Built: 2017. 06 Revamping: 2020 by Partec Strip Width: 200 – 650 mm Thickness: 0.8 – 5.0 mm Finishing Mill ...

Ground precision ball screw, 80270, D50mm, 1300mm, Honsberg, new As good as new in original packaging! The high-quality part comes from a spare parts warehouse of a mechanical processing of a large automobile manufacturer, is completely new and in the original packaging. Attention: We have many, bearing, high-quality ball screws in different designs in diameters 32, 40, 50, 63 and 83mm. Take a look at our website of IPV GmbH. ball screw, ball screw, ball roller spindle, Type 80270, D50 mm, 1300 mm, Fa. Honsberg, ball screw diameter 50 mm, pitch 10 mm, Thread length 1080 mm length of ball screw nut 142 mm, total stroke 938 mm, Total length of the spindle 1300 mm Diameter for coupling with motor 30 mm Diameter bearing seat A 35 mm, diameter bearing seat B 35 mm Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. Howe ...

Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date

General Manufacturer: Chiron Type: DZ 28 P five axis Year of manufacture: 2023 Control: Siemens Sinumerik 840D SL Travels: X 1,200 mm Y 1,100 mm Z 800 mm Rapid traverse: X 120 m/min Y 75 m/min Z 75 m/min Axle acceleration: X 1.0 g Y 0.8 g Z 1.5 g Main spindle drive Speed: up to 20,000 rpm 2-axis torque swivel device 2 x face plates diameter: 479 mm Swivel axis as A-axis Swivel angle: ± 120° Swivel radius: 700 mm Bridge dimension: max. 2,400 mm Repeatability: ± 5" Speed: 42 1/min NC rotary table as C-axis Clamping force: 25 kN +/- 15 % per clamping segment Repeatability: ± 5" Speed: 100 1/min Loading and unloading station for tools Tool Stations: 2 x 36 Tool shank: HSK-A 63 DIN 69893 Tool diameter: max. 78 mm Tool diameter with free adjacent spaces: max. 160 mm Tool length: max. 450 mm Tool weight: max. 10 kg Tool change time: approx. 0.9 s Ma ...

Used AMOS AEP 20 juice belt press, with a grinding system and a pallet generator. Belt with a capacity of 1 meter per hour, i.e. about 3 tons.

Used belt press made by Monobelt, type NP12CK. New 2009. Weight 1620kg. Belt width - 1200 mm. Working flow - up to 10 m3 / h. Throughput max - 170-360 kg DM / h. Installed power: Press with 0.55 kW thickener 2.2 kW flushing pump Rinse water quantity 5 m3 / h Net weight / maximum usable weight 1620/2800 kg Sludge inlet connection DN80 1 ”GF rinse water inlet Filtrate outlet connection DN150 Manufacturer's documentation.

We sell a used and revised TTW with a deposit of 30-100g.

1 x Steam turbine generator 3817 KW KKK Siemens CFR5 G6b 5,000 KWe x 1,500 rpm 50 Hz 6,300 V for sale in operational condition Turbine Manufacturer KKK Siemens Model CFR5 G6b Steam pressure fresh [bar] 64 Dampfdr. Ed. [bar] 8.5 Generator Manufacturer INDAR Model BZK-710-S/A-4 P Generator [KW] 5.000 Turn around. [per min] 1,500 Frequency [per sec] 50 Voltage [V] 6,300 Current [A] 458 Scope of delivery: The system has been completely dismantled and is complete including the control system. Technical documentation: available Spare parts / tools: not available The plant was dismantled in working order. Last major overhaul: unknown Sales are "as is" or after prior inspection by a company engaged by us on request

-) 2-jaw drill chuck 20 mm -) Dowel drilling device with 4-compartment grid 16-32-22-25 mm -) 90° frame stop pluggable -) Miter stop 45° and 22.5° pluggable -) Moving equipment -) Workpiece clamp manual 2 pieces -) Suction connection D 100 mm Optional accessory: -) Gauge in handwheel -) infinitely variable double angle miter stop -) 1 lever operation -) switchable pneumatic stroke for two planes -) Leaser on request

Passage width 2500 mm Stroke 900 mm Total power requirement 62 kW Machine weight ca. 27,5 t Dimensions L x W x H approx. 3950 x 2200 x 4850 mm Retraction force 40 t Master cylinder 2 pieces Column diameter 220 mm Installation height 1300 mm Table size 2500 x 1600 mm Ram size 3100 x 16000 mm Table height above floor approx. 900 mm Flow speed 200 mm/sec Return speed 200 mm/sec Working speed 5 - 15 mm/sec Oil tank 1500 l Oil quantity 1200 l Pressure control adjustable from up to 50 - 400 t Thermoforming cushion 1400 x 800 mm Deep-drawing unit capacity 30 - 60 t Deep-drawing cushion stroke 250 mm Deep-drawing cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low-maintenance and reliable Piston rod with induction hardening and chrome cladding T-slots according to customer requirements, if not specified 22mm according to DIN CE Certific ...

Specifications: - working length 3500 mm - Stand passage 3050 mm - max pressing force 2000 kN - Distance table / ram max. 480 mm - Stand projection 260 mm - Ram stroke approx. 300 mm - Lifting speeds - Downspeed idle max. 100 mm/sec - Boost speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg -with: - CNC control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. Tool clamping - Upper tool + universal die tool - Material requirements - Two-hand control panel

Center height: 120 mm Center width: 450 mm Spindle passage/bore: 23 mm Board width: 100 mm Speeds: (12) 180 - 2240 min-1 Travel upper carriage: 140 mm Tailstock mount: MK 2 Quill stroke: 80 mm Motor power: 2.5 kW Connection: 400 V Dimensions approx.: 1300 x 880 x 1250 mm Weight approx.: 600 kg Equipment: Piercing device Quick release holder System Multifix, size Aa Machine light Coolant device

Key data: 40 t, 1030 mm

For sale is an automated press brake with 1st hand robot system for serial sheet metal part forming. Press brake 2019 BYSTRONIC Xpert 40/1030 Robot 2019 KUKA KR10R 1100 sixx Specifications Press brake - Press force: 400kN (40t) - Working length: 1030mm - Control: ByVision Robot - Max. nominal load capacity: 11kg - Reach: 1100mm - Axles: 6-axle - Position repeatability: 0.02mm - CE certified safety modules Characteristics - Fully automated bending cell with integrated 6-axis industrial robot - from 1st hand - Dimensions (LxWxH): approx. 3.25m x 2.8m x 2.5m - ByVision Bending control terminal with 22-inch Full HD touchscreen Machine condition - Operating hours: 7,724 h - Cycle counter: 310,212 - Complete service history, regular inspections - Technically perfect condition - Functional test: can be demonstrated during inspection - Location: Niederroh ...

85 ton x 2700mm 5 Axis back gauge Laser guards With Tooling

Eccentric press LEK 250, new in 1987, in good condition.

Set of 3 high precision angular contact ball bearings, Spindle bearing, 7020 CD/P4ATBTG130, SKF, new Attention: Original SKF product - No replica from… Special price ! If you have a UID number, we will gladly issue an invoice without VAT. New! The part was bought from a spare parts store of a company and has never been in operation, is completely new. Function guarantee! For second hand parts, we can not provide a conventional warranty and guarantee. However, we do provide a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Stainless steel pressure filter, EDFR-D-060-G-530-1-V-1, 400bar, Hydac, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.

No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-2580-CNC OT-41 Specifications - Nominal pressure: 800 kN - Max working length 2500 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 320 mm - Distance between side frames: 1900 mm - Max backgauge distance: 600 mm - Nominal motor power: 5.5 kW - Weight: 4200.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CN ...

Single-column press with 15 T power suitable for continuous shift operation (a) travel speed 10 mm downwards; b) Opening speed up to 25 mm/sec c) Starting pressing speed 10 mm/sec d) Table size 400x400 mm e) Ram size 200x200 mm, with T slots and central cylinder tension f) Total size approx. 1150x800x1750 mm g) Oil temperature display on the oil tank h) Pressure adjustment from 5 T to 17 T (adjustable via rotary control) i) Two-speed hand lever operation j) Machine body powder-coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Installation, commissioning, instruction against separate charge Press type single-column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. ( at 250 bar ) 150 kN Free tear-off force max. 10 kN Pressure build-up time Closed tool Stee ...

- DOCUMENTS AND MANUALS INCLUDED WE ORGANIZE SHIPPING AS WELL Max. concentricity errors at 300 mm: 0.008 mm RS232 / USB : interface Measuring range diameter (x) 310 mm Application range height (z) 320 mm Weight 90 Kg Max. tolerated errors (mechanical) 0.003 mm Max. tolerated errors (vision system) 0.005 mm Max. radius measurements < 5% - Max. angle measurements errors < 0.2° Max. concentricity errors adapter 0.002 mm Max. resolution 0.001 mm Max. manual moving speed 1 m/s INSERT CONUS MK5 IT WAS USED BY LATHE CNC DOOSAN PUMA

General: Year of construction 2013 Control Fanuc Series 0i-MD Travel X 703 mm Y 603 mm Z 503 mm Working spindle 12,000 rpm Tool changer 40-fold Tool holder DIN40 Specifications: Table swivel +31.1° / -121.7° Table rotatable 360° Other equipment and accessories included: Preparation 3D probe

Scissors for reinforcing steel or bars max 32mm

Dimensions (LxWxH) approx. 2,600 x 1,000 x 1,600 mm Weight approx. 1,300 kg machine number 833, Digital display chalice PICO Version A 23, Clamping length approx. 2000 mm, clear width in the passage (portal) 740 x 320 mm