ssi schaefer pr used for sale

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 1,1 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,3 x 0,6 x 0,65 m Benchtop lathe 3-axis LCD digital display system fully assembled. Longitudinal feed. 3-jaw chuck 125 mm. 4-jaw chuck 125 mm. Clamping plate. 4-way steel holder. Clock for thread cutting. Drip tray Hardened bed tracks. Emergency stop switch. Forage protection Set of wheels. Appropriate tools. Base cabinet is optional The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 250 mm bore stroke: 130 mm spindle taper MT: 3 MK table:: 380 x 380 mm column diameter: 98 mm turning speeds: 75 - 3200 U/min feeds: mm/U total power requirement: 1,1 kW weight of the machine ca.: 220 kg. range L-W-H: 0,5 x 0,6 x 2,05 mm Gear drill Thread cutting device Left/right barrel Tilting work table. Lighting. 2 electric Speed levels. Depth stop. Gears run in oil. Packaging dimensions: 2100x400x710mm Weight 260kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tilting frying pan, make Palux ProfiLine, model PLEKB15-90-120-PM, built in 2023 (NEW!), 3 pieces available, for frying, braising and steaming products with cooking oil/fat,, low-fat cooking of breaded meat and fish, poultry, fried potatoes, fried sirloin,, Frying plate for everything short-fried, such as steaks, schnitzels, fillets, fish, pancakes, mushroom pans, etc.,, Preparing soups, sauces, ragouts, goulash, etc. (e.g. sautéing, deglazing the ingredients and pureeing for soups),, not suitable for deep frying!, The heat is supplied via electric radiators under the roasting pan,, Thermostatic control of radiators,, with certainty - temperature limiter,, Motorized tilting takes place via push buttons., Technical specifications:, Connected load: 18 kW,, Steam output: 10.58 kg/h,, Control range: 50 - 250°C,, Crucible size: 980 x 570 x 215 mm,, Roasting surface: 980 x 570 mm,, Nominal c ...

HSK63-B,F Test Mandrel Suitable for Vollmer machine types: QWD 750 / QWD 760 / QWD 750 H / QWD 760 H / VPulse 500 and all models from the QXD series (200/250/400)

ProJet 3600W Max for sale in good condition. Printing time approx. 10500h, printed build material less than 50KG, printed support material approx. 110KG., Installation: 03/2017, print modes: HD - high definition, Commissioning: 03/2017, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm) 11.75 x 7.2 x 8 in (298 x 183 x 203 mm), resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: 375 x 450 x 790 DPI; 32 μ layers 750 x 750 x 1300 DPI; 20 μ layers 750 x 750 x 1600 DPI; 16 μ layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Printing modes: UHD - Ultra High Definition, Support material support material: VisiJet S400 VisiJet S400, ...

Brand new 3D printer Sinterit Lisa Pro for sale (used once)., Specification:, - built-in nitrogen chamber, - Nitrogen consumption: 0.48 m³/h, - Heating system with max. chamber temperature: 200°C, laser: IR Laser Diode 5 (W), Installation space in mm (x/y/z): 150x200x260mm, Accuracy (typical): 0,05mm, Weight in kg: 89, Dimensions in mm (w x h x d): 680x510x900mm

A Seropack bag-in-box filling machine is available. Filling quantity range: 2l-10l, Filling material: liquid/semi-liquid, Industries: food and other: Food and other, Control system: ELVAmac ELVAbox 61, Documentation available.

For sale is a ProJet 2500Plus from 2017. The device is in perfect condition, test printing is possible (for an expense allowance, which will be offset against purchase)., Accessories: EasyClean System from 3D Systems, second build platform, Technology: MultiJet Printing

Turntable diameter: 1600mm, load capacity: 1650kg, max. winding height: 2000mm, turning speed: 12rpm. Documentation available. On-site inspection is possible.

On behalf of a customer, we are selling a 3D Systems MultiJetPrinter type ProJet 2500Plus in very good condition. The machine was used as a dealer demo machine., The machine has been equipped with new drive belts and new filters. All materials have been removed according to the manufacturers instructions. The machine is empty. The printing time is approx. 1400 hours, 181,000 layers were printed with approx. 24KG of building material and approx. 33KG of support material., Equipment:, - 3D Sprint Basic Complimentary Software (on-line activation), Installation: 2016, Print modes: HD - High Definition, Net build volume (xyz) net build volume (xyz) hd mode: 294x211x144mm / 11.6x8.3x5.6in, Resolution (xyz) resolution (xyz) hd mode: 800x900x790 DPI; 32μ (0.0012 in) layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on printing parameters, ...

A Klarstein dehydrator is available. Temperature range: 40°C-90°C, max. timer: 15h, compartments: 24, max. capacity: 85kg, power: 5850W, volume: approx. 10m², machine dimensions X/Y/Z: approx. 700mm/1400mm/880mm, weight: approx. 160kg.

3D printer Onyx Pro from Markforged in very good condition with the following accessories:, Equipment:, 4x Onyx FFF Filament, OVP, 1x Onyx FFF filament opened, stored in dry box, 1x Glass fiber CFF filament opened, stored in the printer, 5x PLA, OVP, 1x dry box for material storage, Net build volume (xyz): 320mm x 132mm x 154mm, resolution (z): 100µm - 200µm, nozzle diameter : FFF nozzle 0.4mm, CFF nozzle 0.9mm, extruder units: Double quick-change extruder, Printing break + restart possible: Yes, build platform: Kinematic coupling; Repeated positioning accuracy 0.01 mm, building material: Onyx, Precise PLA, Smooth TPU, endless fibers: Fiberglass, network connection: WiFi, Ethernet, USB, Dimensions in mm (w x h x d): 575mm x 322mm x 366mm, mass: about 30 kg, Electrical connection / consumption: 200-240 VAC, 50 Hz 100-127 VAC, 50/60 Hz, certification: CE, nozzle diameter: FFF nozzle  ...

pressure: - t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Renner compressor and Donaldson ALD 0300 ultrafilter are available. 1) Compressor Renner RSK-Pro 2-30, year of manufacture: 2019, max. pressure: 10bar, volume flow: 4610l/min, power requirement: 30kW, machine dimensions X/Y/Z: approx. 1630mm/820mm/1630mm, operating hours: 16276h. 2) Ultrafilter Donaldson ALD 0300, year of construction: 2019, operating pressure: 4bar-16bar, drying technology: cold regenerating adsorption. Including pressure vessel BWB, volume: 64l. Documentation available. On-site inspection is possible.

table length: 3000 mm table width: 1500 mm table height: 200 mm weight of the machine ca.: 1,6 t The Professional 750 4-280040.PD 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm diameter of piston: 130 mm work speed: min. 2 m/sec work speed: max. 9,8 m/sec return speed: 20 mm/sec Max. pressure: 200 bar weight of the machine ca.: 0,65 t total power requirement: 4 kW dimensions of the machine ca.: 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled ...

bore capacity in steel (diameter): 30 mm throat: 254 mm bore stroke: 120 mm : 4 Motor output: 9 speeds: 120 - 1810 U/min column diameter: 92 mm table surface area: 475 x 425 mm total power requirement: 1,1 kW dimensions: 915 x 450 x 1705 mm weight: ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can ...

table length: 2400 mm table width: 1200 mm table height: 200 mm weight of the machine ca.: 1,0 t The table Professional 750 Article no. 4-280030.PD 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current capacity: - kVA throat: - mm contact pressure capacity: - kp total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m No. 1244 CNC portal spot welding machine PEI PROG-2515 Working area: 2500 x 1500 Siemens control Welding capacity of the butt spot welder 3+3 mm Welding capacity of the gun 2+2 mm Feed rates: X+Y 800 mm/sec, Z: 400 mm/sec, A 120°/sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with CNC-path-control: HEIDENHAIN type: iTNC 530 for axes: 3 x-travel: 1020 mm y-travel: 560 mm z-travel: 600 mm table surface area: 1000x560 mm table load: 1.35 t tool magazin:: numbers of tools: 40 max. tool diameter: 76 mm max. tool-dia with free toolbox: 125 mm max. tool length: 305 mm max. tool weight: 7 kg milling head: spindle taper:: SK40 spindle turning speed - stepless: 100-10000 U/min Power: 12/18 KW feeds -stepless-: 16000 mm/min rapid motion -longitudinal/cross/vertical: 40 m/min dimensions of the machine ca.: 3x2.3x2.6 m weight of the machine ca.: 6.8 t 3D measuring tracer: RENISHAW OMP40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Manufacture: HEIDENHAIN iTNC 530 x-travel: 800 mm y-travel: 500 mm z-travel: 540 mm table-size: 910x500 mm spindle turning speed range: 10000 U/min tool magazin:: 24 weight of the machine ca.: 8 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm y-travel: 900 mm z-travel: 800 mm control: HEIDENHAIN iTNC 530 for axes: 3 table surface area: 1700x850 mm tool magazin:: 30 spindle taper:: SK 40 spindle turning speed - stepless: 100-10000 U/min feeds infinitely variable to rapid traverse: 2-20000 mm/min voltage: 400 V dimensions of the machine ca.: 385x420x325 cm weight of the machine ca.: 18.6 t Coolant through spindle: pressure: 18 bar 3D measuring tracer: RENISHAW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MORGANA Digifold Pro By combining creases and folds in a single unit, a highly productive and user-friendly mobile finishing center is created. Perforation is also possible, which optimally rounds off the range of applications. With a speed of up to 6,000 sheets per hour and a maximum format of up to 900 x 358mm, the new Digifold Pro is even more flexible in use. A large touch-screen display makes it easy to operate the Digifold Pro, as well as all other machines from the Pro generation. Versatility The Digifold Pro can be used in three different ways, depending on your needs: As a creasing machine As a folding machine As an integrated creasing and folding machine that performs both functions in a single operation. Feeder: Suction feeder pulls paper from below Paper size: max. 900 x 358 mm // Paper size min. 210 x 140 mm Paper weight max. 400 g/m² // Paper weight min.  ...

table-size: Breite: 800 mm table-size: Tiefe: 350 mm workpiece height: mm Dimensions (L/W/H): 4600 x 3200 x 2500 mm weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Classic Center (Ink & Register remote control) Autoplate (semi automatic plate loader) Cooling and recirculation (Baldwin Balcontrol) Ink-roller washing device - automatic Blanket washing device - automatic Antistatic feeder (Compact) Antistatic delivery (Compact) Powder sprayer (Grafix Alphatronic 200) Speed Sheet/h (13000)

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 25,050 mm Number of fields per row of shelves: 09 pcs. Number of levels plus ground level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Number of pallet spaces per row: 108 pcs. Total number of pallet spaces: 108 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 800 kg The scope of delivery includes: 10x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P73 Profile dimensions: 75 x 75 x 2.00 mm Incl. cross and diagonal struts, and footplates The stands are pre-assembled (screwed truss) Height: 3,800 mm Depth: 1,100 mm  ...

Plastic Dryer - Wittmann Drymax Primus E60-150-M (2 pcs.) Year of Make: 2016 Description: Dryer with 2 molecular sieves, 1-silo Silo capacities: 150 l Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Hermetically insulated silo Dryer with Wittmann Feedmax S3-Net suction conveyor Price: On request All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź.

INTERMAC PRIMUS 184 3D waterjet cutting machine was built in 2022 in Italy. This extremely powerful machine is designed for precise 3D machining of any type of glass. The process is performed by a 5-axis cutting head, which offers unlimited machining capabilities. It allows, among others, the cutting of complex patterns and the cutting of holes of any size with extreme ease. In order to guarantee excellent stability during even the most intensive challenges, the machine design is made of stress-relieved stainless steel. The movement of the X and Y axes is performed on hardened and ground tooth guides of high precision. On the other hand, the Z-axis moves via a prismatic recirculating ball screw. All the table’s travel components are protected by leak-proof covers. The offered PRIMUS 184 WaterJet also features an extensive equipment, which includes e.g. intuitive CAD/CAM software, ...

• Vertical cartoner, semi-automatic • 2 operating modes: intermittent, continuous • Intermittent output max. 50 packs/min • Continuous output max. 110 packs/min • Format range folding carton d 18-80, w 20 - 120, h 50 - 250 mm • Folding carton removal with suction cups • Blind embossing for lower tuck-in flap (without embossing roller) • Leaflet inserter for pre-folded leaflets • Bad ejection • Outfeed conveyor • Vacuum pump • Partial enclosure with segment doors • PLC Siemens S7-300 • HMI Promatic UniOP • Drive 400V/50Hz

Key data: 5 , 120 mm, 230 mm

Planing and moulding machine Profimat 23 E Working width: 230 mm Working height: 120 mm Dressing table length: 2000 mm Spindle arrangement 1: Dressing 5.5 kW, 6000 rpm, 40 mm diameter 2+3 Left+ Right 7.5 kW, 6000 rpm, 40 mm diameter 4: Thickness 5.5kW, 6000rpm, 40mm diameter 5: Bottom 4kW, 6000rpm, 40mm diameter Feed motor: 2.2 kW Feed speed infinitely variable 0-24 m/min Milling heads with adjustment gauge Total power requirement: 27 kW Dimensions set-up: 3400 x 1650 x 1970 mm Machine weight, approx.: 3500 kg

Vertical packaging machine, high speed machine with continuous reciprocating sealing jaws motion, suitable to do pillow and gusset bags, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(50-300)xW(50-240)mm (single pulling) | film width: 130-510mm | max. speed of the machine in neutral: 180 cycles/minute | stainless steel | 380V/9.0kW | 6bar, 0.25m?/min | machine dimensions: L1700xW1300xH1700mm | weight: 700kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for ...

Vertical packaging machine, high speed machine with continuous rotary sealing jaws motion, suitable for pillow bags, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(80-500)xW(70-265)mm (single pulling) | film width: 170-560mm | max. speed of the machine in neutral: 180 cycles/minute | stainless steel | 380V/7.5kW | 6bar, 0.25m?/min | machine dimensions: L1500xW1200xH1620mm | weight: 700 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machine ...

Shrink tunnel for large sized products, PRO-version for max. evenly temperature, ideal to be combined with AMTEC MAXIshrink W20XXL PRO-version. Suitable for polyolefin films. Adjustable speed and temperature. - Technical specifications: 380V, 30kW | speed: 0-30m/min | temperature: up to 175?C | max. product dimensions (mm): W700xH300 | machine dimensions (mm): L2100xW950xH1315 | weight (net/gross): ca. 350/400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Shrink tunnel for large sized products, PRO-version for max. evenly temperature, ideal to be combined with AMTEC MAXIshrink W15 4XL PRO-version. Suitable for polyolefin films. Adjustable speed and temperature. - Technical specifications: 380V, 24kW | speed: 0-30m/min | temperature: up to 175?C | max. product dimensions (mm): W940xH250 | machine dimensions (mm): L2800xW1460xH1280 | weight (net/gross): ca. 350/400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

PRO-version shrink tunnel to heat shrink products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40M (vertical) PRO-version, AMTEC Shrink Wrapper FLOWshrink W100-L High speed PRO-Version. Double air circulation, adjustable air flow, suitable for large products and/or high speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Specifications: max. product dimensions: L(unlimited)xW300xH230mm | tunnel size: L1200xW350xH380mm | machine dimensions: L2200xW900xH1160mm | power consumption: 380V, 14kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sampl ...

PRO-version shrink tunnel to heat shrink products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40XL (vertical) PRO-version and AMTEC Shrink wrapper SIDEshrink W60XXL PRO-version. Double air circulation, adjustable air flow, suitable for large products and/or high speed packaging (recommended also for SIDEshrink and FLOWshrink machines). - Specifications: max. product dimensions: L(unlimited)xW700xH300mm | tunnel size: L1700xW790xH350mm | machine dimensions: L2200xW1400xH1230mm | power consumption: 380V, 21kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample ...

PRO-version shrink tunnel to heat shrink very large products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper speed shrink W40XXL (vertical) PRO-version. Double air circulation, adjustable air flow, suitable for large products and/or high speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Specifications: max. product dimensions: L(unlimited)xW800xH300mm | tunnel size: L2400xW850xH400mm | machine dimensions: L2400xW1320xH1750mm | power consumption: 380V, 24kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are availabl ...

PRO-version shrink tunnel to heat shrink very large and wide products with polyolefin film in higher speed. Suitable to be combined with AMTEC Shrink Wrapper SIDEshrink W60XXXL PRO-version. Double air circulation, adjustable air flow, suitable for large products and/or high speed packaging (recommended for SIDEshrink and FLOWshrink machines). - Specifications: max. product dimensions: L(unlimited)x1100xH230mm | tunnel size: L2400xW1200xH280mm | machine dimensions: L2400xW1600xH1260mm | power consumption: 380V, 28kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available  ...

Shrink tunnel for middle sized products, PRO-version for max. evenly temperature, ideal to be combined with AMTEC MAXIshrink W20L PRO-version and speed shrink W30L PRO-version. Suitable for polyolefin films. Adjustable speed and temperature. - Technical specifications: 380V, 14kW | speed: 0-30m/min | temperature: up to 175?C | max. product dimensions (mm): W370xH230 | machine dimensions (mm): L1200xW670xH1290 | weight (net/gross): ca. 250/300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

PRO-Version of our standard Sleeve packer / film band roller with stacking unit for stacking products into 1-5 layers and/or in multi-rows. Suitable for cigarette packs, soap, toothpaste, stationary, etc. Fully automatic infeed of products, automatic transport into optional tunnel (SHRINKtunnel-PE-XL) and outfeed. Completely closed housing, new design and strong structure. - Technical Specifications (can vary regarding customers specifications !): MITSUBISHI/Japan PLC | 380V, 2kW | 6bar / 0.1m?/min | up to 15 cycles/min | max. product dimensions (mm) L(50-550)xW(50-290)xH(15-250) | machine dimensions (mm) L1300xW2305xH1800 | weight (net/gross): 600/650kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very s ...

Automatic side sealing machine for products without length limitation. PRO version with kissing table (movable infeed belt) to handle short products. Sealing position (where the sealing bar and the counterpart meet) adjustable in height for a centrally positioned sealing seam. Quick change perforating pins. Ideal to be combined with AMTEC SHRINKtunnel POF-L (high speed) PRO-version. Touch screen for control and setting, easy to operate. Easy film reloading near floor. Optional available: stacker systems for shrink wrapped panels, etc. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | max. package size: L(80-unlimited)xW(50-420)xH(2-180) mm | sealing blade width: 530 mm | 220V/3kW | 6bar | machine dimensions: L1820xW1605xH1350 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - U ...

PRO-version automatic side sealer, suitable for products without any length restriction. Sealing position (where the sealing bar and the counterpart meet) adjustable in height for a centrally positioned sealing seam. Quick change perforating pins. Ideal to be combined with AMTEC SHRINKtunnel POF-XL (high speed) PRO-version. Touch screen for control and setting, easy to operate. Easy film reloading near floor. Optional available: stacker systems for shrink wrapped panels, etc. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | max. package size: L(100- unlimited)xW(80-600)xH(2-180) mm | sealing blade width: 800 mm | 220V/4.5kW | 6bar | machine dimensions: L2240xW2250xH1480 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immedi ...

PRO-version automatic side sealer, suitable for products without any length restriction. Sealing position (where the sealing bar and the counterpart meet) adjustable in height for a centrally positioned sealing seam. Quick change perforating pins. Ideal to be combined with AMTEC SHRINKtunnel POF-XXXL (high speed) PRO-version. Touch screen for control and setting, easy to operate. Easy film reloading near floor. Optional available: stacker systems for shrink wrapped panels, etc. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | max. package size: L(300- unlimited)xW(200-1000)xH(10-180) mm | sealing blade width: 1140mm | 220V/5.5kW | 6bar | machine dimensions: L2995xW2870xH1485mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available im ...

Fully automatic continuous side sealer for fast and reliable product flow due to continuous motion sealing unit. PRO-Version including external infeed belt and side guide rails for products in multi-pack format. Different guide rail systems are available depending on product height and shape. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | max. packaging size: L(80-700)xW(80-230)xH(10-180) mm | sealing blade length: 380mm | 220V, 5 kW, 6bar, 0.6m? | machine dimensions: L2295xW1160xH1370 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquir ...

Fully automatic continuous side sealer for fast and reliable product flow due to continuous motion sealing unit. PRO-Version including external infeed belt and side guide rails for products in multi-pack format. Different guide rail systems are available depending on product height and shape. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | max. packaging size: L(80-700)xW(80-380)xH(10-180) mm | sealing blade length: 530 mm | 220V, 5 kW, 6bar, 0.6m? | machine dimensions: L4100xW1610xH1370 mm. Please note that our new prices are often below the usual used prices. Please feel free to inqui ...

Fully automatic continuous side sealer for fast and reliable product flow due to continuous motion sealing unit. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 70 cycles/minute | max. packaging size: L(80-700)xW(80-380)xH(5-180) mm | sealing blade length: 530mm | 220V, 6.5kW, 6bar, 0.6m? | machine dimensions: L4755xW1660xH1370 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immed ...

Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute | max. packaging size: L(80-1000)xW(80-400)xH(5-180) mm | sealing blade length: 500mm | 220V, 6.5kW, 6bar, 0.6m? | machine dimensions: L5405xW1780xH1380 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 differ ...

Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external finger chain infeed conveyor system and friction feeder. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute | max. packaging size: L(80-1000)xW(100-500)xH(5-180) mm | sealing blade length: 630mm | 220V, 6.5kW, 6bar, 0.6m? | machine dimensions: L6350xW1950xH1380 mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 diffe ...

Fully automatic High-speed Sideshrink Machine. Continuous motion sealing machine with moving sealing unit for reliable and trouble free packaging. PRO-Version including external infeed belt and side guide rails for products in multi-pack format. Different guide rail systems are available depending on product height and shape. Touchscreen panel for user friendly operation. No-product-automatic-stop-system. Easy and fast changeover of formats. Less film wastage reduces film costs. Ideal in combination with the AMTEC SHRINKtunnel POF-L (High-Speed) PRO-Version. Can be combined with POF-PE-Shrink Tunnel. - Specifications: max. speed of the machine in neutral: 120 cycles/minute | max. packaging size: L(80-1000)xW(80-400)xH(5-180) mm | sealing blade length: 530mm | 220V, 6.5kW, 6bar, 0.6m? | machine dimensions: L2935xW1805xH1385 mm. Please note that our new prices are often below the usual use ...

PRO-version automatic side sealer, suitable for extra large/wide products without any length restriction. Ideal to be combined with AMTEC SHRINKtunnel POF-XXXL (high speed ) PRO-version. Touch screen for control and setting, easy to operate. Easy film reloading near floor. Optional available: stacker sytems for shrink wrapped panels. - Specifications: max. speed of the machine in neutral: 60 cycles/minute | max. package size: L(300-unlimited)xW(200-1020)xH(10-120) | sealing blade width: 1140mm | 380V/4.0kW | 0.55m?, 6bar | machine dimensions: L2530xW2765xH1490mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample p ...