ssb 40 used for sale

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 20mm total power requirement: 37+22 kW weight of the machine ca.: 39 t dimensions of the machine ca.: 6684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 400 mm max. pitch circle: 133,4 mm short taper holder: Gr. 6/ DIN55027 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The container can be used as a water tank, extinguishing water tank, extinguishing water tank, extinguishing water retention tank, rain retention tank, retention tank, retention tank, rainwater retention, rain storage tank, retention ecister, cistern, etc. Dimensions: D = 2.50 m - L = approx. 8.70 m The container has two saddle feet, a manhole DN 600 with dome lid, is used and emptied inside and professionally cleaned. On request, the container can be completely equipped with an extinguishing water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - consisting of: - 1 suction line DN 125 with A-fixed coupling according to DIN 14319 with special closure for fire brigade tricant keys incl. a ball valve 4", - 1 pcs. sleeve incl. ball valve welded into the highest point of the suction line (for ven ...

centre distance: 5000 mm turning diameter over bed: 4000 mm turning dia. in gap: 5000 mm spindle bore: 104 mm turning speeds: 1,4 - 71 (18x) U/min total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m 4-jaw face plate Ø 3.150 mm modular lathe! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 4000 mm table width: 3000 mm table load: 60 t total power requirement: 14.3 kW weight of the machine ca.: 48.5 t dimensions of the machine ca.: m Brand: FX Type: 83.300/400 Used machine Digital readout: Heidenhain ND 780 Table length: 4.000 mm Table width: 3.000 mm Table load: 60 T Movement: 2.000 mm Width T-slots: 58 mm (M30) mm Feeding: 4 - 1.500 mm/min Rapid traverse: 4.000 mm/min Power: 14,3 kW Machine weight: 48.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, a test run is possible by prior arrangement. OKUMA 5-axis vertical machining center MU-400VII with OSP-P300M-H – Tool magazine for 48 tools, BT40 (or Big Plus) – Tool breakage detection incl. automatic length measurement – Preparation for the function of automatic zero point shift (incl. software) – Collision avoidance system for 4-/5-axis milling centers – Coolant pump 0.8 kW instead of the standard version 0.25 kW – Flush cooling – Function for automatic zero point displacement incl. workpiece measurement, Renishaw OMP60 probe – Cutting edge control for 5-axis machining – Super NURBS Type A for 5-axis centers –Conveyor

current intensivity: 400 A open-circuit voltage: 65-75 V IP protection class: IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vertical tank made of 316 stainless steel by TM IBÉRICA with a total capacity of 800 liters. Top bottom klopper with off-center flange with agitation, man's mouth and flange connections. Body with visual level. Bottom klopper with discharge from the bottom. On 4 legs. General characteristics: Maker TM IBERIAN Model TK-409 Guy DISPENSER Material Stainless steel 316 Year of manufacture 1996 Working pressure on the body: 2 bar Specifications: Volume 800 liters total Background type Klopper Type of agitation 4-blade propeller Agitation motor 0.75 kW - 1.385 rpm Envelope 4 legs Lower bottom tubulatures x1 Man's mouth x1 Breaker x1 Outer diameter body 930 rpm Body height 1000 mm Body height + backgrounds (TOTAL: 3300 mm)

BÜHLER Stone Mill MSUA 400 4 kw V-belt drive n=500 rpm Inlet 100 mm diameter Engine rebuildt Bearing: oil exchanged

roll diameter: 400 mm roll length: 1000 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 45 kW Condition: used, overhauled Specification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rolls - roll diameter: 400 mm - roll length: 1000 mm - rolls: with core bore, with central chamber for water cooling - Rollers mounted on bronze bushes with oil circulation lubrication via pump, - equipped with new slewing rings for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit NEW - Tiltable guide plates - stainless steel roller container to hold the mixture - bi-directional rods - safety brake for NOT stop - AC motor: 45 kW - 400 Volt - 50 Hz - Painting: in RAL colours according to customer requirements - new control panel with touch pan ...

see pdf attached

; Gross weight [kg]: 13500; Accessories: 40FT HC Unused Genset Container

Key data: 400 mm, 1000 mm, 235 mm

Universal lathe PREMIUM CU 400 RD - Vario Center width 1000mm incl. RÖHM lathe chuck Standard equipment: - RÖHM three-jaw lathe chuck - Quick-change steel holder set, 5 pieces - Halogen machine lamp - Emergency stop button / zero-voltage trigger - Lathe chuck protection with safety switch - Tool carriage with splash guard - Base frame / chip tray / bulkhead - Tool Kit / Instruction Manual / CE Specifications Center width 1000 mm Center height 200 mm Turning diameter over bed 400 mm Turning diameter over carriage 235 mm Turning diameter without bridge 550 mm Machine bed width 320 mm Cross slide travel 235 mm Upper slide travel 110 mm Lathe bit cross-section, max. 25x25 mm Lathe chuck holder DIN 55027 No. 6 Spindle holder (rotary spindle) MK 6 mm Spindle bore 52 mm Speed range 1, infinitely variable 18 - 98 rpm Speed range 2, infinitely variable 48 -  ...

Compact machine system for the production of stamped and bent parts made of strip and wire. Tool quick clamping system for shortest set-up times User-friendly machine and process control P CNC 4E Compatibility with RM 35, RM40 and RM4 tools Item condition: very good You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Compact machine system for the production of stamped and bent parts made of strip and wire. Tool quick clamping system User-friendly machine and process control P CNC 4E Compatibility with RM 35, RM40 and RM4 tools Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Description: Type : ÖLtransformator Version : Hermetic Make : CG POWER SYSTEMS Belgium NV Year of construction : 2012 Condition : New Rated power : 3500 KVA Medium voltage : 33 KV +- 2 x 5% Low voltage : 400 V Switching group : Dyn 5 Frequency : 50 Hz Cooling type : KNAN Total weight : 7750 Kg Cqs9sygju Oil weight : 1720 kg Synth. ESTER Length : 2400 mm Width : 900 mm Height : 2250 mm + 160mm cable flag Other sizes and voltages also available from 100 KVA to 3500 kva . All transformers are tested and ready for use and immediately available from our warehouse in 59557 LIPPSTADT . Nationwide delivery . For further questions available Mon to Sat. 8 a.m. to 10 p.m.

We sell 160 x Broadcom VSE-225-31S 25/40Gbit SFP+ In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all the ...

We sell These are original Cisco SFPs. 100 x QSFP-40G-SR-BD, 44 x X2-10GB-SR We will sell the complete package only to the highest bidder early next week. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are onl ...

; Gross weight [kg]: 800; Engine: Perkins 403A-15G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

Vacuum pump

4000 x 2000mm 4000w LOW HOURS

Specifications: - Total payload driven + running unit 40000 kg - Payload per container device 20000 kg - Workpiece diameter approx. 500 - 3500 mm - Center distance of the support rollers adjustable via trapezoidal thread spindle - Roll diameter 500 mm - Roll width 150 mm - driven single-sided drive - infinitely adjustable rotation speed - Handheld remote control for re- and li.-run - Drive 400 V - Both units are built on rail chassis - Space requirements Unit approx. W 3800 x H 1150 x D 1350 mm - Platzb. with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight applied. Unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Maximum force ton-force 400 Slider stroke length mm 250 Number of courses of a slider per minute 25 Maximum distance between table and slider (in lower position of slider) mm 670 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 Main electric motor power kW 40 Press overall dimensions mm - length 3410 - width 3140 - height 5930 Press weight kg 30 600

; Gross weight [kg]: 798; Engine: Perkins 404D-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

11 KW

Key data: 30 , 13 , 206

Compresseur WORTHINGTON CREYSSENSAC type Rollair 4000 Compresseur à entrainement direct en bon état

Hand lever plate shears and profile steel shears Knife length 400mm Cuts sheets up to 5mm Cuts round steel up to 13mm Heavy and stable design with foldable storage table. Mounted on base More hand lever plate shears in stock, also for round steel and profiles!

Machine Details Warehouse number 1105-03446 Machine type machining center - Horizontal Haas brand Type HCE 400 P Year of construction 2000 Control type CNC Haas control system Storage location FRANCE Country of origin Japan Delivery time by arrangement Freight base EXW (Incoterms 2000) Price Technical details x-displacement 560 mm y-way 635 mm z-path 560 mm Haas control system Pallet size 400x400 mm Table load 400 kg Spindle motor 22 kW Spindle speed 8100 1/min Rapid speed 36 m/min Pallet changer type 2-fold rotation Table indexing 360000° ° Tool magazine: 30 x BT 40 Total power requirement 54 kVA Machine weight approx. 8 t Space requirement approx. 2.8 x 5.5 m Accessories Conveyor Information Still very precise horizontal center full B AXIS 30X BT 40 TOOL CHANGER CNC HAAS 2 PALLETS 400 X 400 MM

Compressor Bitzer Type: 6F-40.2Y-40P Volume: 151.6 m3/h Cooling capacity: 100 kW at - 5°C/40°C, 83kW at -10°C/40°C, 42.7kW at -25°C/40°C Refrigerant: R404A Pieces in stock: 6 Reference number: S 92 Condition: Used in good condition Price on request, We have many other Kealteanlagen : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Diosna spiral kneader W 240 - 3 boilers - 400kg dough - after repetition - industrial mixer

REMS MAGNUM 4010 LT pipe threading machine was built in 2020 in Germany by REMS GmbH & Co KG. This extremely versatile tool is designed for threading all kinds of pipe and bolt threads. The clamping chuck used prevents material slippage during machining, making the process very stable. The large distance between the clamping chuck and the centring chuck, in turn, allows long pipes to be clamped securely. After machining, the edges of the material are smoothed by an internal deburring device with two blades. The MAGNUM 4010 LT pipe threader on offer weighs approximately 80 kg. Technical specifications of the REMS MAGNUM 4010 LT pipe threading machine - thread types: R, NPT, G, NPSM, Pg, M, UNC, BSW - pipe thread diameter: 16-63 mm / ½ – 4″ - bolt thread diameter: 18-60 mm / ½ – 2″ - pipe thread length (cylindrical): 150 mm - bolt thread length: unlimited - spindle rotat ...

; Gross weight [kg]: 11430; Engine: Perkins 4008TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1460

Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format

Meurer tray and wrap-around packer type: CM/TP 25-B 400 the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format

Electric motor AEG IEC 225M IMB 5 Year of construction 1996 Type AM 225 MC 404 52kW Price net 250

CNC controller: MITSUBISHI MSX-853 IV Axes X-axis travel mm: 560 Y-axis travel mm: 560 Z-axis travel mm: 660 Distance spindle nose - table surface mm: 80-640 Feed rates m/min: 0-60 Worktable Number of pallets: 2 Table dimensions mm: 400 x 400 Maximum workpiece size (D x H) mm: 630x900 Max. workpiece weight kg: 400 APC time s: 9 División estandar Grados: 360 - 0.001º Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 15/11 Spindle torque Nm: 110 Bearing Inner Diameter mm.: 80 Tipo: SJ-2B4351TK Tool system Tool magazine slots: 40 Max. Tool Diameter: 70 With free neighboring places mm: 170 Max. Tool Length mm: 450 Max tool weight kg: 8 Tool Shanks : MAS-BT40 Equipment Chip conveyor Workarea light 4th axis Cooling Tank capacity: 170L High-pressure bar: 15 Machine running times Under power: 64.734 Rated power kVA: ...

Technical data for the pallet rack traverse: Shelving system: Jung Heinrich Type: Esmena Included in delivery are: 01x pallet rack traverse, used Material color: yellow Box profile: 100 x 40 mm Truss type: GN 100x40 Agraffe: 5 HK (hook) Clear width: 4,005 mm load per pair of trusses 1,000 kg at the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

RECON Part number: 524 070 11 01 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

sheet thickness: 1.25 mm steel Roller center distance: 63 mm

RECON Part number: 524 011 26 01 #524100554 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Robot SEPRO en bon état Référence : SR 4040 S3 VISUAL Charge nominale : 12 kg Année 2008 Poids robot : 899 kg Poids armoire : 200 kg

grinding diameter: 5 - 255 mm grinding length: 300 mm centre height: 130 mm grinding length at plunge grinding: 50 mm control: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/min work piece spindle speed: 0 - 500 U/min feed of grinding spindle slide cross: 0 - 5000 mm/min table speeds: 0 - 5 m/min grinding wheel diameter: 450 mm total power requirement: 10 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale: Endress & Hauser Promass 40E DN80 Order number: For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikxgmail.com The price is exclusive of 21% VAT.

Ser. No.: L. 09/31 // Fabr. No.: 0270180/1 Pockets : 4 parallel fold Format (mm): max. 297 x 420 // min. 148 x 210 Equipment / Additional information: With delivery A45/1A-DC Power 400V

Stanko Ø 400 mm

DH Robotics PGHL-400-80 Heavy Duty Large Stroke Electric Parallel Gripper with Brake Gripping force (per jaw): 140-400N Stroke: 80mm Recommended workpiece weight: 8kg Open/close times: 1.0s/1.1s Repeatability (position): ± 0.02mm Weight: 2.2kg Driving Style: Precise Planetary Gearbox + T-Shaped Lead Screw + Rack and Pinion Size: 194mm x 73mm x 70mm Communication interface: Standard: Modbus RTU (RS485), digital I/O. Optional: TCP/IP, USB2.0, CAN2.0A, PROFINET, EtherCAT. Running noise: < 60dB Rated Voltage: 24V DC ± 10% Rated Current: 1.0A Peak Current: 3.0A IP Class: IP40 Recommended environment: 0~40°C, below 85% relative humidity New

all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute total power 8 kW air consumption ± 300 L / min. mobile with mould trolley variable speed 3x400v 50hz with bridge breaker dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg PLC control

For sale is a homogenizing plant Koruma V160/400 for the production of ketchup / mayonnaise, etc.