ssb 40 used for sale

faceplate diameter: 3300 mm swing diameter: 4000 mm turning height: 3050 mm workpiece weight: 25 t faceplate turning speed range: 8 - 40 U/min ram swivable +/-: 30 ° main drive motor: 55 kW Control: Heidenhain TNC 640 total power requirement: ca. 85 kW weight of the machine ca.: 85 t dimensions of the machine ca.: 8,0 x 7,7 x 6,7 m Conversion and modernisation in 2024 equipped with: - CNC control Heidenhain TNC 640 & Handwheel - 2 swivelling ram supports (1x CNC controlled) - chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bystar 4020 Year of construction 2006 4.4 Kw with pipe cutting axis very good condition

Halliburton HD 400 Pump Container . EX-container, VOLVO diesel engine D16. Diesel tank. Fan. Halliburton with 6" valve - can be replaced.

diameter: 5 mm shaft length: 40 mm cutting lenght max.: 56 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Data on the machine type: Double-pressure rotor press Application: Screw production Make: Hilgeland Year of manufacture: 1990 Max. wire diameter: 5 mm Max. shaft length: 40 mm Max. wire section length: 56 mm Max. output: 600 pieces/min Machine is fully operational Viewing possible by appointment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel paths X/Y/Z: 900 x 400 x 200 mm Table size 800 x 400 mm

Showa LCB 4011B Lube pump

Offer 24228 Specifications: - Welding current 400 A 60% ED - 320 A 100% ED - Welding current adjustable from 20 A to 400 A - Current consumption 400 V / 46 A - with: - E. - Welding cable - Ground cable -Trunk - Space requirement approx. W 450 x H 750 x D 600 mm - Weight approx. 150 kg

Technical data: Type : Casting resin transformer Finish : Dry Make : ABB Year of construction : 2000 Condition : Used Rated power : 1250 KVA Medium voltage : 10 KV Low voltage : 400 V Groupset : Dyn 5 Frequency : 50 Hz Cooling Type :AN Gross vehicle weight : 3090 kg Nationwide delivery included.

Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW

Capacity: 250 - 400 ton V ? Ring nominal force: 20 - 200 ton Counter ram nominal force: 10 - 100 ton Ram stroke: 30 - 200 mm V-Ring stroke: 40 mm Counter ram stroke: 40 mm Max. die size: 765 x 760 x 610 mm Number of strokes: 40 s.p.m. Approach speed: 120 mm / sec Return speed: 135 mm / sec Working speed: 5 - 50 mm / sec Die Weight total: 2400 kg

The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient blade length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, pipelines, motors, cables or gearbox housings. The shears are also often used for cleaning scrap metal or cutting vehicle radiators. The machine has a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. Using the foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted using simple clamping screws. The scissors are from our demonstration pool and can of course be viewed or tested. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

Inv. Num. : 8264 Type: MA-400HA Producer: OKUMA Created: 2008 Parameters: Work table length: 400 mm Work table width: 400 mm Maximum spindle speed: 8000 1/min X-axis travel: 560 mm Y-axis travel: 610 mm Z-axis travel: 625 mm

Manufacturer: SEW Umrichter, Type: Movitrac 3005-403-4-00, Serial number: 14607, Serial number: 8256578, Serial number: 14607, FREE TEXT: Technische Bitte den Bildern entne,

Inv. Num. : 8265 Type: FU 400/V/2 Producer: Heckert Generated: Parameters: Work table length: 1600 mm Work table width: 400 mm Maximum vertical spindle speed: 1400 1/min X-axis travel: 1150 mm Y-axis travel: 370 mm Z-axis travel: 430 mm Machine height: 1980 mm Machine length: 2490 mm Machine width: 2270 mm Machine weight: 3850 kg

Manufacturer: Frenostat Bremsgerät Typ 2000 Hilger und Kern, Type: 400/60/3132000, Model: 137700,

Inv. Num. : 8273 Type: Bylas 4020-2 Producer: Bystronic Created: 1994 Parameters: Control system: Bystronic CNC 90 Maximum power: 3.5 kW Work table length: 4000 mm Work table width: 2000 mm Maximum sheet thickness when cutting (stainless steel): 0.2-6 mm Maximum sheet thickness when cutting (aluminum): 1-6 mm Maximum sheet metal cutting thickness (steel): 0.2-12 mm Maximum sheet metal cutting thickness (copper/brass): 1-4 mm Maximum sheet metal cutting thickness (galvanized): 0.2-8 mm Maximum woodcut thickness: 50 mm Maximum cutting thickness for plastic: 50 mm Equipment: Replacement resonator (2kW) Spares

Manufacturer: Giardina, Type: Dualtech 401, Year: 2007, Control: Programm, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 1500, Spraying line: Ja, Conveyour system: Band, Laquer circles: 3, by rollers: Ja, Jet dryers (number): 2, Sanding machines (number): 1, Design sanding machine no 1: Costa CT 32/1350, IR dryers (number): 1, Belt conveyors (number): 1, Jet dryers (number): 2, Year :2007

Manufacturer: Klöckner Möller AMX Frequenzumrichter, Type: AMX3-460-16-400, FREE TEXT: ULN:460 F:50/60, Free text 1: UN: 460V , Free text 2: IN 16 Ampere,

Manufacturer: IMA, Type: Quadromat 4012 F, Year: 1995, Program: yes, Min-max edge material mm: 0,5 - 8,0, Min.-max. workpiece length in mm: 250, Min-max feed m/min: 10, Premilling: yes, Min.-max. batten magazine mm: 0,5 - 8,0, Mitre stations: yes, radius milling: yes, Corner tracing type: yes, 2 Motoren: yes, Year :1995

Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: ca.1984, Control: Hand , Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnitthöhe min-max mm: ca. 70, Schnitttiefe min-max mm: 100, Schnittlänge min-max mm: 3500, Power saw engine kW: 3 KW,100 Hz, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Bohreinheit Horizontal: 100, On customer order: inkl. Bohrstation, Year :ca.1984

Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: 1984, Control: Hand / Teilautomatik, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Cutting hight max mm: ca. 70, Cutting lenght max mm: 2500, Power saw engine kW: 3, 100 Hz, Width adjustment manually: yes, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Exhaust diameter mm: 100, inkl. Bohrstation, Year :1984

Manufacturer: Düspohl, Type: DGK 400, Year: 1980, Control: Hand, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45 - 90, Cutting hight max mm: ca. 70, Max. cutting depth in mm: 150-2600, Max. cutting depth in mm: 150-2600, Power saw engine kW: 2,2, Width adjustment manually: yes, Saw blade diameter max mm: 300, rotations controlled: 5800, Exhaust diameter mm: 100, Year :1980

BYSTRONIC ByStar 4020 laser cutting machine was built in 2011 by the renowned Swiss brand BYSTRONIC. The machine, designed to meet the highest industrial standards, is used for precision cutting and engraving of workpieces with a maximum thickness of 25 mm. Materials made of e.g. steel or aluminium are machined using a laser beam with a maximum power of 6 kW and a thickness of just a few μm. It ensures extremely precise workpiece edges, which are characterised by unprecedented smoothness and absence of irregularities. The offered ByStar 4020 laser cutting machine is also extremely easy to operate. The process parameters are programmed in the intuitive ByVision CNC control, which allows the creation of advanced machining programmes in just a few steps. All this makes the BYSTRONIC laser the perfect choice for any industrial plant. Technical specification of the BYSTRONIC ByStar 402 ...

Manufacturer: Maskiner, Type: LPFK 2P 400 HKM, Year: 1997, Steuerung : Programm, Foil wrapping machine mm: yes, Foil stations: 2, Intermediate conveyor mm: yes, Shrinking tunnel mm: 300, Auslaufband mm: no, Electrical power shrinking tunnel kW: ca 30, Gesamtanschlusswert kW: 30, Foil 1 width mm: variable, Foil 2 width mm: variable, Through running hight mm: 150, Working width mm: 220, Year :1997

internal diameter: 800 mm grinding depth: 500 mm swing diameter: 850 mm total power requirement: kW weight of the machine ca.: 6,4 t dimensions of the machine ca.: m Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max ...

Key data: 390 KW

Perkins 4008TESI-LC Containerised Natural Gas Cogeneration Plant. Hours: 0 Voltage: 400 V Scope of supply: Complete Cogeneration plant in container, gas heat exchanger, Control Panel WOODWARD EASY GEN 3000. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Separator IFB 403 X-73 7500r/min 3-50/60Hz 230V Used tools

Cooling unit EPCS -Model: QSI-2-6GE-40Y-H4 -Compressor type: 6F-40.2Y (x2) -Volume: 151.6 m3/h (x2)) -Cooling capacity: 201.8 kW at -5°C/40°C, 166.2 kW at -10°C/40°C, 85.6 kW at -25°C/40°C -Dimensions: 4800 x 2300 x 2250 mm -Number of fans: 4 x 1000 mm -Year of production: 2018 -Quantity in stock: 1 -Condition: used in good condition

NARGESA MC 400 3-roll bending machine was built in 2015 in Spain by PRADA NARGESA, S.L. The machine, designed for precision machining of steel components, is an excellent choice for the production of, among others, gates, fences, railings and balustrades. The extremely rigid body is distinguished by the use of guide shafts and 3-axis rollers made of hardened steel, whose drive eliminates slippage during the rolling process. This solution, combined with independent, manual adjustment of the lower axes, increases overall ergonomics and productivity. The NARGESA tube and profile bending machine weighs 365 kg. Technical specifications of the NARGESA MC 400 tube and profile bending machine - number of rollers: 3 - roller diameter: 130 mm - roller rotation speed: 8 rpm - number of shafts: 2 - shaft diameter: 40 mm - shaft usable length: 80 mm - power: 1.5 kW - power supply: 3x 400 V ...

Specifications: ✅ Brand: Previero ✅ Model No.: MU-408 ✅ Cutting chamber: 800 x 380 mm ✅ Rotor: Closed, inclined cut, water-cooled ✅ Engine: 75 kW (100 hp) ✅ Ideal for continuous work and high-density materials Common Applications: Shredding of technical plastics, purges, thick sheet, pipe, large parts Integration into recycling or extrusion lines Suitable for materials such as PP, PE, PET, PVC, ABS, PA, among others High production capacity with excellent crushing quality

Nominal Power: 400 ton Stroke par minute: 16-48 Adjustable stroke: 10-250 mm Table dimension: 1200 x 1200 mm Ram dimension: 1200 x 1200 mm Distance table – slide: 1000 mm Adjustment slide : 200 mm Motovariator: 22-66 HP

x-travel: 560 mm y-travel: 560 mm z-travel: 630 mm Control: MSX 701 III MAPPS Main spindle:: Max. rpm: 14.000 min/-1 power capacity - main spindel: 18,5 / 11 kW max. Torque: 120 Nm tool taper: MAS BT 40 distance spindle center to table: 80 - 640 mm distance Spindlenose and center of table: 100 - 730 mm pallet changer:: numbers of pallets: 2 size of pallet: 400 x 400 mm max. workpiece weight: 400 kg max. workpiecediameter: 630 mm max. workpiece height: 900 mm change time of pallets: 6,0 sec b - axis: 0,001 ° Tool-Presetter:: number of toolpositions: 60 pos. tool taper: MAS BT 40 max. tool diameter: 70 / (140) mm max. tool length: 400 mm max. tool weight: 8,0 kg feeds:: rapid traverse ( X / Y / Z ): 50 m/min feed speeds: 0 - 50.000 mm/min Tipp feed: 0 - 1.260 mm/min total power requirement: 35 kVA weight of the machine ca.: 9,8 t dimensions of the machine ca.: 5,5 x 3,5 x 2,8 m Docume ...

The foaming cabin from the manufacturer Cannon is designed for industrial use in foaming processes for steering wheels in the automotive industry. The foaming cabin is composed of a total of 5 steering wheel foaming cabins, the difference between them being that each cabin can be a different color for steering wheel foaming. Other auxiliary equipment that are part of the foaming cabin system: -tempering oven type UF 450 PLUS -installation material preparation -individual material preparation installation for each cabin depending on the color of the steering wheel Manufacturer: CANNON Model: A-Compact 40FC Year of Manufacture: 2017 Type of Machine: Foaming Cabin Air Pressure IN: 6/8 bar Control Unit: Control panel PLC Usable Materials: Isocyanate, Polyol Maximum Absorbed Power: 10.1 kW Acoustic Pressure: 81 dBA Find more here - / Contact us at -

REF-2391-B COMAS DRV 400 DOSING-DEPOSITING MACHINE WITH 5 NOZZLES Manufacturer: COMAS Model: DRV Type: 400 Serial no.: 3793 Year of manufacture: 2005 Dosing machine/depositor for the production of pastries Fitted with 5 standard conical nozzles (12 mm diameter) Voltage: 380V / 3-phase Working width: 400 mm Overall belt dimensions (mm): 2,200 x 530 (LxW) Overall machine dimensions (mm): 2,250 x 1,400 x 1,750 (LxWxH)

Max pressure: 400 ton Table size: 1000 x 650 mm Between columns: 1000 mm Lower and upper table are heated Max temperature: 200° C Height: 2600 mm Weight: 9 ton Capacity: 400 ton

Wide-chamber pin mill with grey cast iron housing, output / throughput: 600 kg/h max. (depending on material), required motor power: 12 kW to 22 kW (optional). Rotor and stator disc in very good condition. Cleaned, anti-rust primed and repainted. Rust protection inside can be easily removed before commissioning.

Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second Features: Breite Druckmedium: 16-114mm Breite Farbband: 25,4-107mm Maximale Länge Farbband: 900m Punktgröße: 0,125mm 0,125mm Druckgeschwindigkeit: 12 \/s, 304,8 mm/s Druckertyp: 110Pax4 Druckmedien: Standart, Anhänger und RFID-Etiketten

Key data: 400 KW, 500 kVA, 400 V

The largest model in Electroquell's range. The 500 kVA (400 kW) generator with a Ricardo motor is suitable for shopping malls, industrial plants and large investments. Ricardo Motor ComAp IL-NT AMF25 controller Brushless alternator Weatherproof housing Drip pan Possibility of continuous operation 24 hours a day Power: 500 kVA / 400 kW Voltage: 400 V Current: approx. 722 A Fuel: Diesel EN 590 Additional options: ATS system, remote communication, cooler for 55 degrees Warranty: up to 60 months

REF-2049 BIZERBA A 404 FB AUTOMATIC SLICER Automatic slicer manufactured by Bizerba Machine number: 10597824 Model: A 404 FB Year: 2009 30-55 strokes/min Slice thickness: 0.5-12 mm Cutting carriage: 400 mm Overall dimensions: 1,560 mm length, 1,000 mm width, 1,540 mm height

Behringer HBP 400 Depth of throat: 400 mm Max height of workpiece: 400 mm Length of band saw: 5800 x 38 x 1,3 mm Power needed: 5 kW Length : 2900 mm Depth : 2500 mm Height: 2100 mm Weight: 2,7 ton

Control: Heidenhain iTNC530 Travel: X-axis: 4,000 mm Y-axis: 1,200 mm Z-axis: 1,300 mm Horizontal A-axis: 0-135° B-axis: +-106° NC rotary table: 1,250 mm with 50 rpm Fault circuit Ø: 1,600 mm, 50 rpm with Tork drive Tool magazine: 60-fold Tool holder: HSK 100 Motor spindle: 15,000 rpm / 90kW Accessories -Conveyor - 5-axis simultaneous package - Last major maintenance in 2023 -Suction - IKZ 70 bar - 3D probe with radio - Tool breakage detection - Handwheel with radio HR 550 FS

Sell several CO2 compressors, in good working order. Make bid for the lot

Tos FA5AV X: 1400 - Y:420 - Z: 400mm Max longitudinal travel X-axe: 1400 mm Max cross-travel Y-axe: 420 mm Max travel Z-axe: 400 mm Admission in millinghead: ISO 50 Table size: 1600 x 400 mm Power needed: 20.5 kW Weight: 5300 kg

; Power [PS]: 24; Gross weight [kg]: 650; Engine: Perkins 404J-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, - CEE 32A - 400V - 5P, , You can also order this Generator with a Leroy Somer or Stamford Alternator., Prices when changing Generator options may differ from the price online.; Water Tank Volume [l]: 70

Refrigerant compressors system Bitzer -Type: 6H-25.2Y-40P (x7), 6HE-28Y-40P (x1) -Volume: 110.5 m3/h (x7), 111 m3/h (x1) -Cooling capacity for R404A: 605 kW at -5°C/40°C, 500.8 kW at -10°C/40°C, 260 kW at -25°C/40°C -Dimensions: 5100 x 800 x 1850 mm -Items in magazine: 1 -Reference number: Z 101 -Condition: Used in good condition

Size: 980 x 600 mm Equipments: Investment table with tabulator 98 x 60 cm 4 head paper drills Speed regulation

Stainless Steel Continuous Mixer Manufacturer : MWM Type: 400 V-K Content: 400 litres Technical specifications : Machines No. 650 Continuous Mixer with Inclined Bucket Mixing Tool and Chopper Dimensions: length 3.00 m, height 1.00 m + 1.10 frame, width 1.30 m Engine: Power 15 kW, 1,460 /94 rpm Mixing shaft 94 rpm

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 24553; Gross weight [kg]: 24553; Engine: 4016-61 TRG3; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 14000; Gross weight [kg]: 14000; Engine: 4016 TWG2; Accessories: Product features:, Drip-tray, Exhaust system

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 2960; Gross weight [kg]: 2960; Engine: 4045HP551-SV; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 1100