sr 15 6 used for sale

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 650 mm -Length extended: 1131 mm -Width: 13 mm/height: 56 mm -Price: per pair (left right) -Weight: 2.9 kg

We offer for sale two pieces MWM TBG 616 V8 K.. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V8 K Rated power: 300 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 600 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 2004 Operating hours: 57,000 h Location: Cologne

Faceplate, faceplate chuck, four-jaw chuck -without: screw-on jaws Manufacturer: Forkardt -Mouth size: Ø 610 mm -Cone holder short cone: 8 (139 mm) -Weight: 121 kg

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS single door: 600 x 2000 RAL 7035 -Article No.: 5050154 -Dimensions: 2040/645/H90 mm -Weight: 33 kg

Strapping machine, packaging machine, strapping device, strapping set, dispenser, tape dispenser, cutting stand, vertical cutting stand -Cutting stand: vertical, mobile substructure -Cutting width: up to 1110 mm -Roll diameter. up to 660 mm -Dimensions: 760/667 / H1290 mm -Weight: 24 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilt cylinders -Manufacturer: FXMeiller, hydraulic cylinder / tilt cylinder stroke 670 mm -Piston rod: Ø 45 mm / holder Ø 40 mm -Recording cylinder: Ø 50 x 45 mm -Cylinder: outside Ø 102 mm -Dimensions: 1055/210 / H180 mm -Weight: 50 kg

electric motor, three-phase motor -Manufacturer: VEM, electric motor from milling machine WMW HECKERT FSS 315-V -Type: IDM 100/30.6013/2 -Power: 40 W -Speed: 1380 rpm -Shaft: Ø 9 x 8 mm -Design: B5 -Protection class: IP 22 -Dimensions: 165/135/H160 mm -Weight: 4 kg

PLC control, connection module for digital electronic modules, terminal module -Manufacturer: Siemens, ET 200S Compact -Type: 6ES7 193-4DL00-0AA0 TM-C120C -Dimensions: 120/170/H45 mm -Weight: 0.5 kg

Balancing valve, shut-off valve, ball valve, ball valve -Manufacturer: Castel, ball valve, unused, original packaging -Type: 6590/M12 -Connections: 12 mm ODS -Cardboard dimensions: 130/85/H40 mm -Weight: 0.3 kg.

We offer for sale a piece mwM TBG 616 V 8 K. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V 8 K Rated power: 350 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 550 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 1996 Location: Cologne

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, mounting plate -Partial mounting plate: 500 x 700 mm -with: fastening material -Dimensions: 700/500/H20 mm -Weight: 8.6 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 132 teeth -Number: 19x saw blades available -Price: per piece -Weight: 10,1 kg/piece

Level sensor, Sensor, probe, immersion probe, float switch, magnetic switch, magnetic float switch -Manufacturer: KSR Kuebler, Magnetic Float Switch -Type: ARV1.5 -VSS/R-L1.650/12-V44A-adjustable -Immersion depth: approx. 1650 mm -Dimensions: 1785/75/90 mm -Weight: 1.4 kg

Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230V, noise level:

CNC control, control panel, machining center, server cabinet -I/O: Control panel -Dell: Desktop KXGVD -Dell: Precision T1650 Tower -with: scanner -Dimensions: 505/640/H1600 mm -Weight: 74 kg

Clamping plate, welding table, welding table, straightening plate -Mounting plate is: steel -Width: 650 mm -Length: 650 mm -Height: 845 mm -Plate thickness: 40 mm -Plate is: on steel frame -Transport dimensions: 650/650/H845 mm -Weight: 203 kg

Exhaust water cooled Recon Part Number: 1206 7084 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Drawer rail, telescopic rail, drawer extension, drawer rails, drawer extension, Telescopic rails, pull-out rails, heavy-duty pull-outs -Length retracted: 600 mm -Length extended: 1215 mm -Width: 15 mm -Height: 57 mm -Price: per pair (left right) -Number: 7x pairs available -Weight: 2.7 kg

Universal screwdriver, construction screwdriver, screwdriver, electronics screwdriver, hand drill -Nominal input: 740 watts -Max. drill bit: Ø 13 mm -Connection: 220 volts Quantity: 1 available -Dimensions: 450/210/H80 mm -Weight: 4.3 kg/piece

Recon Part number: 0208 8696 (with acceptance) / 0407 9093 (without acceptance) Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Side door -Dimensions: 1980/635/H40 mm -Weight: 26 kg

Nibbling machine, nibbler, nibbler, tin snips, circular shears -Power: 1800 watts -Voltage: 220 V -Max. Cutting capacity: 4.5 mm -Dimensions: 570/220/H250 mm -Weight: 10.5 kg

Recon Part number: 0208 9754 Complete standard dimensions: 210/175mm incl. counterweights and gear incl. DNV-GL test Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 5 pieces -with: ring groove -for: SK40 holders -Thread: M16 -Price: complete -Weight: 0.28 kg

Recon Complete, left and right variant with exhaust valve Part number right: 1243 1318 Part number left: 1243 1319 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ------------ Sale only to commercial customers! ---------------------------------------------------------------------- ------------- If you have any further questions, please do not hesitate to contact us!

Power line filters -Rated voltage: 480 VAC -Rated current: 63 A. -Dimensions: 280/160/H75 mm -Weight: 4.5 kg

PLC control, digital input, digital input -Manufacturer: SIEMENS -Type: Simatic S7 6ES7 421-1BL00-0AA0 -Dimensions: 25/210/H290 mm -Weight: 0.81 kg

Bergen L 32:40 P cylinder head covers complete. 6 pieces available also available all other major parts like: connecting rods, pistons, crank shaft, turbo charger, camshaft piece , fuel pumps etc. In our stock in Istanbul Turkey Please contact us at: info@fin-marine

USED HOSOKAWA PC 600 GRANULATOR REF.: C5705 General characteristics: Manufactured by HOSOKAWA Model PC 600 Year built 2001 Motor characteristics: Voltage 230/400 V Current 5.7/3.3 A Power 1.5 kW Frequency 50 Hz - 3f Rotational speed 1435 rpm Reducer characteristics: Rotational speed min. 63 o max. 316 rpm

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Wauquier, coolant pump type 5/69300 305 P -Power: 0.15 kW/2800 rpm -Delivery rate: l/min -Immersion depth: 205 mm -Dimensions: 200/230/H400 mm -Weight: 12.6 kg

Dishwasher trolleys 7 Editions for 60x40cm sheets Height: 187cm Width: 46,5cm Depth: 62cm

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 690 x 700 mm -T grooves: 5 pieces 28 mm -Number: 1x table available -Dimensions: 690/700/H693 mm -Weight: 360kg

Machine light, machine light, work area light, system light, compact light, switch cabinet light -Manufacturer: steel, compact luminaire with glued-on escape sign -Type: C-LUX 6500/1081 -Voltage: 230 V -Fluorescent lamp: 1x 8 watts -Dimensions: 445/110/H190 mm -Weight: 2.1 kg

Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: Siemens, braking resistor -Type: 6SE6400-4BD16-5CA0 -Power: 13 kW -Dimensions: 185/185/H285 mm -Weight: 4.0 kg

RS Simulators Here we offer a test cabinet. Water-cooled Temperature range: -40°C to +180°C Test room dimensions: 850mm x 850mm x 800 mm (WxHxD) External dimensions: 1100mm x 1850mm x 1500mm (WxHxD) Current consumption: 13.5 A Refrigerant: R404A Connection voltage: 3x400V/N/PE 9A Weight: approx. 800 kg Type: TS 600/45 Explosion-proof operation not tested but Max 160°C in this Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

Measuring transducer, power measuring transducer, real power measuring transducer -Manufacturer: Müller Ziegler, transmitter -Type: Pdr-MU 690/400 V 50 Hz 150/1 A 0-150 kW -Number: 4x devices available -Price: per piece -Dimensions: 85/45/H113 mm -Weight: 0.4 kg/piece

Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder from lathe Kern CD 480 -Type: BDG 6360-0-05-W031-1024-65// -Price: complete -Dimensions: 100/90/80 mm -Weight: 4.3 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 88 teeth -Weight: 9,5 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Saw blade: Ø 605 x 6 mm -Inside: Ø 80 mm -Hole circle: Ø 120 x 22 mm -Number of teeth: 88 t -Weight: 9 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 176 teeth -Number: 20x saw blades available -Price: per piece -Weight: 10 kg/piece

Clean room pass box. 2-doors Pallet air Shower UV. Pass boxes Air Shower UV is aimed at dust removal and disinfection processes using ultraviolet light (UV) without wastes. Thanks to the fans in the unit and the induction nozzles, dust is removed and collected in the equipment’s filters.

Recon Part number: 1230 0571 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Clamping device for automatic band saw, hydraulic double vice, saw unit mounting, feed, material positioning -Upport saw unit: from automatic band saw Behringer HBP 360 A -Stroke: 675 mm -Shaft: Ø 40 mm -Measurements: see photos -Dimensions: 720/1545/H220 mm -Weight: 236 kg

NEW Part Number 1227 7152 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Clamping plate, measuring plate, measuring table, optical measuring device, altimeter, measuring table -Measuring table: with optical measuring device and altimeter -Width: 695 mm -Length: 1800 mm -Height: 1775 mm -Weight: 444 kg

Steel staircase, exterior staircase, machine staircase, machine access, extension staircase -Design: stable design, as a machine access ladder -Step size: 600 x 260 mm -Height: upper step 200 mm -Overall dimensions: 590/620/H220 mm -Weight: 28 kg

Recon Part number: 0409 1597 Cyl. 1-3 / 0409 1598 Cyl. 4-6 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Recon Part Number: 2.3120-AA Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Parker, hydraulic cylinder stroke 600 mm -Type: C-3LRLS29MC -Piston rod: Ø 88 mm -Admission: shaft Ø 25/10 mm -Piston: Ø 127 mm -Pmax: 100 bar -Dimensions: 1070/210 / H140 mm -Weight: 66 kg

Gearboxes, spur gears, bevel gears, transmission gears, crane gears, hoist gears, grab lifting and closing gears -Translation: 76.1 :1 -P(kW): 43/n1 2000 rpm -Dimensions: 1230/660/H540mm -Weight: 600kg