sr 15 6 used for sale

Machine type : Floor type vertical suction collator The number of bins to be collated : 10 bins/unit Maximum number of units connectable : Up to 2 units Feeding system : Belt suction feed system Covenyance system : Roller belt convenyance system Maximum paper loading volume : 35 mm in height Processing speed : 7,200 sets/h Paper Size Min-Max: Min.139.7(W)×210(L)mm Max.320(W)×450(L)mm Paper weight 52-250gsm

A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible.

Size: 155 cm Equipments: Material separator: Manufacturer: Kodak Year: 2009

Size: 0x0 Equipments: Speed: Machine output: 360 cycles/hour

Used vacuum mixer from Fryma type DT 1500. The mixer has an anchor mixer with Teflon scrapers, an agitator with a dispersing disc and a heating jacket. PLC control. Total capacity 1500 liters. In addition, I have a colloidal mill / homogenizer from Fryma type MZ 120.

Atlas-Copco 1500 liter tank pressure vessel

Scissors

For sale is a multihead weigher from the manufacturer HD Wiegetechnik. The scale was previously in operation in a cheese dairy. The individual containers belonging to the scale and other components belonging to it are included. If you have any questions, please feel free to contact us.

faceplate diameter: 4000 mm swing diameter: 4200 mm turning height: 2000 mm workpiece weight: 50000 kg cross travel of ram-slide: 2300 mm slides vertical travel: 1250 mm swival range +/-: -15/+30 Grad faceplate turning speed range: 0,5 - 55 U/min Control: Fagor 8055i CNC total power requirement: 182 kW weight of the machine ca.: 134 t dimensions of the machine ca.: 5920 x 10200 x 8400 mm Machine overhauled in 2008 - CNC Control FAGOR 8055i - Tool C8 - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aircooled chiller CLIMAVENETA MECH IB G07/S 15Y 14.93 kW Cooling capacity: 14.93 kW / 4.25tons (12/7 — 35°C) Year of manufacture: 2023 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DVB28FCQMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo Para MAXO G25-180-08-F02I, expansion vessel. Dimensions: 0.43x0.91x1.4 m. Weight: 125 kg. Working hours: 38 h. Condition: Outlet

Aircooled chiller/Heat pump CLIMAVENETA MEHP IB G07 15Y 13.5 kW/15.3 kW Cooling capacity: 13.5 kW / 3.84 tons (12/7 — 35°C) Heating capacity: 15.3 kW / 4.35 tons (40/45 —7°C) Year of manufacture: 2024 Options: Heat pump. Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi DVB28FCQMT (scroll, inverter) Type of refrigerant: R32 Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo Para MAXO G25-180-10-F02, expansion vessel. Dimensions: 0.43x0.92x1.4 m Weight: 150 kg Working hours: 83 h. Condition: Outlet

bushing cut-off , PKO diameter range 16 mm number of dies 5 number of stations (incl. cut off) 6 cutting length 160 mm shaft length under head 125 mm output - pieces/min 150

General SKU269N248 MakeBoldt Friesland engineering bv TypeBM-1500-S22L2 No.85-138 Mounted on framecheck Main Features MaterialStainless steel Volume1500 Ltr. Motor15 KW Specified Features - Ribbon blender Ribbon blendercheck Double shaftcheck Capacity1500 l Trough sizes1500 x 1150mm With covercheck Inletdia.600mm Outlet(2x) +/-500x200mm With jacketcheck With adjustable packing glandscheck Motor(2x) With variable speed drivefrequency converter MaterialStainless steel 1.4301 (304) Information LocationBarneveld With switchcheck With switchgearcheck Floor space2,6x2,0 M Total height2,6 M Weight1440 KGRibbon blendersNew arrivalsBoldt SystemsMixers > Ribbon blendersNew arrivalsBrand > Boldt Systems What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are w ...

Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 1250mm -Length: 1595mm - Height: 47mm - Holes: M16 grid 50 x 50 mm -Drilling: 22 mm grid 450 x 400 mm -Plate: without straight edge -Number: 1 piece available -Weight: 700kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Execution: stable -Drive motor: SEW Eurodrive 0.3/1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw pitch: 150 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2120/300/H540 mm -Weight: 168 kg

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1180 mm -Cross-section: 150 x 60 mm -Recording: see technical drawing in the photos -Transport dimensions: 1400/905/H185 mm -Weight: 264 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor - Execution: stable -Drive motor: SEW Eurodrive 0.3 / 1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: O 150 mm -Trough width inside: 170 mm -Screw: steel / stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2960/300 / H600 mm -Weight: 154 kg

Industrial vacuum cleaner, vacuum cleaner, dust extractor, industrial vacuum, floor vacuum, safety industrial vacuum, polyurethane hose, extraction hose, hose, vacuum cleaner hose, spiral hose, suction hose, hose connectors, hand tube, hose connector, crevice nozzle -Manufacturer: Nilfisk, Crevice nozzle D32 L 153 Black, unused, original packaging -Type: 1470146500 -Conical nozzle: Ø 32 mm -Number: 2x nozzles available -Price: per piece -Minimum order quantity: complete -Dimensions: Ø 38 x 150 mm -Weight: 0.1 kg/piece

Recirculating ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Star, precision ball screw -Type: 1502-2-1085 -Shaft: Ø 24 mm -Thread length: 1495 mm -Dimensions: 1700/110/H70 mm -Weight: 10 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder -double-acting -Manufacturer: GSL, hydraulic cylinder, tilting cylinder, with control valve, stroke 1590 mm -Type designation: D040025-Z T06 -Piston rod: Ø 25 mm / Mounting Ø 20 mm -Number: 6 cylinders available -Price: per piece -Dimensions: 1895/105/110 mm -Weight: 22.8 kg/pc.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilt cylinders -Manufacturer: GSL, hydraulic cylinder, tilt cylinder double acting with control valve, stroke 1590 mm -Type designation: D040025-Z2 T06 - Piston rod: Ø 25 mm / holder Ø 20 mm -Quantity: 3x cylinders available -Price per piece -Dimensions: 2045/120/90 mm -Weight: 22.5 kg / pc.

Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Manufacturer: Air Loc Schrepfer, leveling elements 4 pieces for machine tools and systems -Type: GLV 150 -Height: 32 mm -Price: complete -Dimensions each: 140/140/H32 mm -Weight 2.5 kg/piece

Fixators, leveling units, leveling elements, machine feet, machine feet, leveling shoes, machine foundations, leveling shoes, wedge shoes, machine supports, leveling feet, spring elements -Leveling elements: 4 pieces, for machine tools and systems -Price: complete -Dimension: Ø 150 x 60 mm -Weight: 2,1 kg/piece

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders, short-stroke cylinders -Schura Pneumatic Order No.: 1 206 100 1/150 -Stroke travel: 150 mm -Piston diameter: 40 mm -Piston rod: 14 mm Price: per piece Quantity: 4 pieces -Dimensions: 315/58/H58 mm -Weight: 1.55 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: double-acting, stroke 150 mm -Piston rod: O 70 mm -Piston diameter: approx. 100 mm -Cylinder: outside O 120 mm -Nominal pressure unknown -Number: 2x cylinder available -Price per piece -Dimensions: O 150 x 405 mm -Weight: 30 kg/pc.

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, control panel -Display range: 0 A - 150 A -Installation dimensions: LxWxD approx. 66x138x175 mm -Number: 3x available -Price: per piece -Dimensions: 72/144/H175 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel -Display range: 0 °C - 150 °C -Installation dimensions: LxWxD approx. 66x138x175 mm -6 V 10 mA -Dimensions: 72/144/H175 mm -Weight: 1.5 kg

Clamping plate, marking-out plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 1515mm -Length: 1725mm -Height: 865mm -Plate thickness: 30 mm -Plate is with: support ribs -Center bore: 100 mm -Right and left recess: 55 x 1385 mm -Number: 1x plate available -Transport dimensions: 1725/1515/H865 mm -Weight: 2200kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel -Display range: 0 °C - 150 °C -Installation dimensions: LxWxD approx. 66x138x192 mm -6 V -Number: 2x available -Price: per piece -Dimensions: 72/144/H192 mm -Weight: 1 kg

Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel -Type: No. 6.660713.2 -Display range: 0 °C - 150 °C -Installation dimensions: LxWxD approx. 66x138x192 mm -6 V 39 mA -Dimensions: 72/144/H192 mm -Weight: 1 kg

pneumatic piston pumps, airless high pressure pump, air motor, AIR MOTOR -pneumatic piston pump manufacturer Bollhoff -Type: DB-55.150 -Material volume: max. 7.5 l/min -Max. Pressure: 330 bar -Material temperature: max. 90 °C -Dimensions pump: 1100/900/H1250 mm -Weight: 132 kg -with: drip tray and membrane pump -Manufacturer Graco Type: Husky 307 -Dimensions: 1140/1300/H1500 mm -Weight: 146 kg

Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane undercarriage, trolley -Manufacturer: Gedi, crane chassis with chain drive -Carrier width: adjustable from 90 to max. 260/300 mm -Load capacity: 1500 kg -Chain length 2.5 m / 2.6 m -Number: 2x drives available -Price: per piece -Dimensions: 360/200/290 mm / 380/200/195 mm -Own weight: 16 kg / 15.7 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -driven roller conveyor with driven slewing ring -Roll width: 720 mm -Roller conveyor length: 1500 mm -Roll diameter: 90 mm -driven: via sprockets -Geared motor: 0.55 kW -Speed: 18.9 m/min -Slewing ring driven: 0.18 kW 31.5 rpm -Dimensions: 1510/900/H695 mm -Weight: 314 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer Lenze type variable speed gear: 155-ZNA0-80-4 -Motor power: 0.75 kW -Speed range: 11.5-59 rpm -Speed: adjustable -height shaft axis: 120 mm -Drive shaft: O 25 mm -Construction: B3 -Number: 1 motor available -Dimensions: 390/400/H215 mm -Weight: 31.9 kg -Function tested

Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -Intermediate plate: for hydraulic press, eccentric press, injection molding machine -with: groove for centering -Width: 380 mm -Length: 1520 mm -Height: 55 mm -from: 2 sides milled -Groove: 21 x 15 mm -Weight: 250 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Ideal for building demolition shears, scrap shears, and branch shears -Connections via the piston rod -Piston diameter: approx. 150 mm -Piston rod diameter: 80 mm -Stroke: approx. 420 mm -Total length extended: 1800 mm -Ideal for machines where the piston rod needs to be protected. -Quantity: 6 pieces available -Price: per piece

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 155-ZNA0-80-4 -Manufacturer Motor Hanning type: 8F4-083 -Motor power: 0.75 kW -Speed range: 35-189 rpm -Motor: adjustable -Height shaft axis: 115 mm -Drive shaft: Ø 25 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 400/450/H220 mm -Weight: 31 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 155-ZNA0-80-4 -Manufacturer Motor Dietz type: D48L -Motor power: 0.75 kW -Speed range: 21-118 rpm -Motor: adjustable -height of the shaft axis: 120 mm -Number: 1 motors available -Price: per piece -Drive shaft: Ø 25 mm -Dimensions: 390/400/H250 mm -Weight: 31 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear Lenze type: 155-ZNA0-80-4 -Manufacturer Motor Dietz type: DR80/b/4n -Motor power: 0.75 kW -Speed range: 12-67 rpm -Motor: adjustable -height of the shaft axis: 120 mm -Number: 1 piece of motors available -Price: per piece -Drive shaft: Ø 25 mm -Dimensions: 415/200/H400 mm -Weight: 35 kg

Commission trolleys, rack trolleys, paint drying trolleys, specialist transport trolleys, transport trolleys, window profile trolleys -Total length: 1500 mm -Total depth: 450 mm -Total height: 1530 mm -Arm length: 250 mm -Intermediate dimension: 26 mm -Number: 4x cars available -Price: per piece -Weight: 50 kg/piece

Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 361 mm -Table surface: 1545 x 300 mm -Table thickness: 20 mm -Dimensions: 1545/500/H361 mm -Weight: 222 kg

Unit carrier, clamping plate traversing table, for unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG unit carrier for milling units -with heavy leadership -laterally movable -with counter -Table height: 280 mm -Table surface: 1558 x 295 mm -Table thickness: 20 mm -Dimensions: 1558/295/H280 mm -Weight: 166 kg

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, inclined conveyor, inclined conveyor belt, chip conveyor, chip conveyor belt -Sale / handover: in the current condition as viewed -Webbing: see photo for damage -Conveyor belt: Conveyor belt height adjustable / tiltable -Speed: 18.3 m / min -Height horizontal: 670 to 940 mm -Belt width: 380 mm -Transport dimensions: 1570/500 / H830 mm -Weight: 73 kg

Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams -Hydraulic cylinder: Lifting cylinder BVS 560 -Stroke travel: 150 mm -Piston: Ø 65 mm -Number: 10 cylinders available -Price: per piece -Dimensions: Ø 100 x 305 mm -Weight: 9.2 kg/pc.

Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders -Hydraulic cylinder: lifting cylinder BVS 578 -Stroke: 150 mm -Piston: Ø 100 mm -Dimensions: Ø 150 x 270 mm -Weight: 25 kg

Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders -Hydraulic cylinder: Lifting cylinder BVS 536 -Stroke travel: 150 mm -Piston: Ø 100 mm -Dimensions: Ø 150 x 270 mm -Weight: 24 kg

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, metal band saw machine -Manufacturer: Pehaka, horizontal band saw automatic band saw -Drive: 0.8 kW -Cutting data flat: 320 x 150 mm -Cutting data square: 150 mm -Saw blade speed: continuously adjustable, 20 - 195 m/min -Saw band: approx. 3700 mm -Coolant system -Dimensions: 1800/940/H1310 mm -Weight: 528 kg

Drill, drill press, pillar drill, pillar drill -Handover: in the current condition as seen -Measuring system and speed display: imprecise -Manufacturer: Flott, column drill type SB 15ST with autom. feed -Motor: 0.35/0.65 kW -Speed: stepless -Table size: 215 x 200 mm, travel 635 mm -Spindle holder: MK2, with drill chuck -Spindle stroke: 40 mm -Projection: 200 mm -Columns Ø: 70 mm -Dimensions: 600/830/H1735 mm -Weight: 150 kg

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor type TS 1100 -Speed: 20- 91 m/min frequency controlled -Drive: SEW-Eurodrive 0.055/0.55 kW, see photo nameplate -Voltage: 380-500V -Brake: 5 Nm -Belt width: 500 mm -Conveyor length: 1580 mm -Transport dimension: 1600/690/H360 mm -Weight: 114kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer -Manufacturer: SBA, transformer type ETK 153-003 -Power: 100/209VA 50/60Hz -Technical data: see photo identification plate -Number: 1 x transformer available -Price per piece -Dimensions: 90/85/H90 mm -Weight: 1.5 kg