sr 15 6 used for sale

A high-cube industrial container including two control cabinets, a twin-shaft shredder, and various conveying and transport systems is available as a package offer. 1) Industrial container with double-side opening and base frame. Contents: screw press discharge unit, hopper, vacuum drum, vacuum pump Atlas Copco DZS 300V, condensation unit, and various auxiliary electric motors. 2) Control cabinet with Siemens Simatic S7-1500 control system, control panel: Siemens KTP 700. 3) Control cabinet with Siemens Simatic S7-300 control system. 4) Industrial twin-shaft shredder, rotor shafts: 2, motor/gearbox: Brevini/Dana. 5) Conveying and transport system with an attached feeding unit. The container, its contents, and all listed units are part of a package offer. An on-site inspection is possible.

Inv. Num. : 8688 Type: Beyeler PR 150 IPC Producer: Bystronic Created: 2004 Parameters: Compressive force: 150 t Maximum bending length: 3100 mm Stroke: 215 mm Machine weight: 10000 kg Machine condition: out of order

I) CHARACTERISTICS Useful volume: 150 L Total volume: 175 L Footprint: 900 x 900 mm Tank diameter: 600 mm Manhole height: 1150 mm (approx.) Drain height: 225 mm Cylindrical shape with manhole on conical top and 15° conical bottom with total drainage brought forward. Vertical position on tubular feet fitted with 4 fixing plates with 4 swivel castors, 2 of which are fitted with brake (at the rear of the tank). Note: Anti-static and dissipative casters + grounding lug. II) MAXIMUM CONDITIONS OF SERVICE Working pressure: atmospheric Serving temperature: room temperature Equipment working in explosive atmospheres according to ATEX Directive 2014/34/EU. Note: a pressure/depression valve + 50 gr / - 5 gr will be provided for installation on the tapping in the center of the lid. III) EQUIPMENT III.1) On a 15° conical summit: – 1 manhole Ø 350 mm closed by bolts – 1 DN 38 clamp connection  ...

Type: CR-030/157BTM Serial number: 108675-001 Year of construction: 2012 Gutter width: 315 mm Gutter length: 1570 mm Stroke: 1 - 5 mm Infeed height: 1470 mm Outfeed height: 800 mm Power: 3 x 400V, 50Hz, 0.3kW Dimensions: 2250 x 1400 x 1700 mm Weight: 217 kg

Arburg 470 C 1500-350 (2006) Working hours : only 7.113 h Clamping Force: 150 tons   Tie-bar Spacing: (H × V): 470 mm × 470 mm   Maximum Plate Size : 650 mm × 650 mm   Minimum Mould Installation Height: 250 mm   Maximum Distance between Platen (when fully open): ~750 mm   Mould Opening Stroke : 500 mm   Screw Diameter: 45 mm Approximate Shot Volume (Injection Volume): 230 cm³   Approximate Shot Weight (for PS): 210 g   Injection Pressure: 1 670 bar   Motor/Drive Power: Example listing ~ 37 kW servo/hydraulic drive power   Heating Power: Example listing ~ 10.2 kW   Machine Dimensions (Length × Width × Height):  5.4 m × 2.0 m × 2.2 m   Machine Weight:4 500 kg  

A conventional lead and feed screw lathe Nardini is available. Swing over bed/cross slide: 440mm/260mm, turning length: 1380mm, taper cylindricity over 100mm: 0.3mm, roundness: 0.03mm, runout: 0.03mm, squareness over 100mm: 0.05mm. An on-site inspection is possible.

floor-plate length: 1500 mm floor-plate width: 1260 mm floor-plate height: 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Injector Manufacturer: Nowicki Stainless steel Multi-needle brine injector It has 39 needle sockets and can use up to 156 needles It has a closed brine circulation system with a multi-stage filtration system and a stainless steel centrifugal pump Brine pressure can be controlled up to 3 bar The machine can process between 500 and 3500 kg of product per hour, depending on the specific product Voltage: 400V / 50Hz

video control station The VCPevo / VCP Evolution (often written VCPevolution”) is a fully automatic register punching & bending system for printing plates (offset printing) built by NELA. VCP” stands for: Video‐recognition of register marks (V) + Controlling via CCD image processing (C) + Positioning by stepping motor control (P) — as one brochure puts it. The machine is used in the pre‐press / printing-plate automation sector: it aligns exposed printing plates, punches the register holes, bends the plates (to the correct angle) in one cycle. The VCPevolution line is described as the new generation” of the VCP series, aimed at high precision, high throughput, integration into automation / plate sorting lines. According to NELA’s product page for VCP, the machine is available in different models and can easily be integrated into any automation solution.” nela.de Fin ...

Lippert belt conveyor riser with arch GF 15285-550-400 RA1664 Technical data: Conveying length (NL): 15285 mm riser and bow Frame width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): 0.3 Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum: Ø = 64 mm Deflection roller: Ø = 34 mm Belt type: HSL 8 E year of construction: 2001 Optionally available: Supports Side guide one and both sides feed belt/lead belt frequency converter for stepless speedcontroll Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 15285 Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: 0,31 scope of deli ...

Inv. Num. : 8766 Type: SPITFIRE 1500 Producer: Pierce Created: 2012 Parameters: Software: Lantek Expert Duct Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 15 mm Plasma Source: HYPERTHERM 85A Machine height: 1400 mm Machine length: 3650 mm Machine width: 2520 mm Equipment: Exhaust fan

NEW, 180 cm width, 215 kg net weight, suitable for Euro attachment, Year of construction: 2021

NEW, - 150cm width, - 219 kg dead weight, - 2 cylinders, with Merlo mount, photos are only an example !

Initial registration: 09/1989, 232 kw, 50,444 km, 15,500 kg curb weight,

A fully automatic table/tray sealing and welding machine Reepack is available. Tools: 2, tray width: 180mm, tray length: 250mm. Documentation available. An on-site inspection is possible.

Key data: 554 mm, 2000 mm

Turning length: 2,000 mm Turning diameter: 554 mm above bed 370 mm over cross slide Spindle bore: Ø 104 mm Spindle speeds: 2,000 rpm 3-jaw chuck: Schunk Ø 350 mm Camlock Control: GE Fanuc Equipped with: - 1x Fixed bezel Ø 245 mm - 1x Fixed bezel Ø 390 mm - 18 Ready tool containers - Various jaws for food - Centering tips - Cooling system -Operating instructions Country of origin: UK Motor power: 7.5 kW Machine LxWxH: 410 x 200 x 175 cm Machine weight: 3600 kg

S. No.: 511.1012.471 Cutting Area Length: 150 cm Max Cutting Thickness: 0,6mm Equipment / Additional information: ELECTRO TRIM professional electric paper cutter. Made in Italy, realized to cut various materials such as paper, acrylic film, photo-film, photographic paper. Electro Trim is equipped with a hardened steel rotary blade cutting head, mounted on a sliding tube. The metal parts are powder-coated which ensure high resistance to cuts and scratches. The standard model includes a support for positioning on the ground with adjustable feet, the paper collection curtain for paper waste and a lamp that lights up the cutting area.

Injection moulding machine for PET preforms

Maximum Diameter: 110 mm // Minimum Diameter: 32 mm

Materials: PP // Film Width (Max): 1650 mm

Key data: 1500 kN, 415 g/PS, 55 mm

Built in 1999 Clamping force: 150 tons. Screw diameter: 55 mm Displacement: 456 cm³ Spray pressure: 1564 bar Very good condition!

Rammax RW 1504-HF, Technical specifications:, - Year of construction: 2004, - Dead weight: 1.48 t, - Driving speed: 21 km/h, - Engine power: 13.2 kW

Einführung der langlebigen und zuverlässigen STYLE BT 1500, einer fachmännisch gefertigten 3-Achs-CNC-Maschine aus dem Jahr 2005. Perfekt geeignet für sowohl neue als auch erfahrene Bediener, bewahrt diese gebrauchte BT 1500 ein optimales Gleichgewicht zwischen Leistung und Präzision für konsistente Hochleistungsergebnisse. Diese Maschine bietet einen beträchtlichen X/Y/Z-Verfahrweg von 1500/650/650 mm, der breite Manövrierfähigkeit für Ihre Metallbearbeitungsbedürfnisse gewährleistet. Der robuste Tisch mit einer Länge von 1850 mm und einer Breite von 610 mm kann eine Belastung von bis zu 1000 kg problemlos handhaben. In Kombination mit einer Vorschubrate von 8000 mm/min auf allen Achsen, garantiert die STYLE BT 1500 Ihnen gesteigerte Produktivität, ohne Kompromisse bei der Qualität einzugehen. Eines der Hauptmerkmale der gebrauchten BT 1500 ist die 14 kW starken Spindel.  ...

Ref. no.: 18643 Hersteller: ARBURG Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Machine weight: 4850 kg Dimensions LxWxH part 1: 4,6 x 1,6 x 2,1 m Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67).

clamping force: 1500 kN injection volume: 141 g/PS screw diameter: 35 mm platen size: 470 x 470 mm Condition: used, Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITION Injection unit: - Screw diameter: 35 mm (wear-resistant) - Centring ring diameter: 125 mm - Max. shot weight: 141 g (PS) - Injection pressure: 2,500 bar Closing unit: - Clamping force: 1,500 kN - Max. opening stroke: 750 mm - Mould installation height: min. 250 mm - Mould clamping plates: 470 x 470 mm - Approx. operating hours: 79,000 h (still in use) - Operating voltage: 3x 400 V, 50 Hz - Nominal motor heating current: 75 / 40 A - Total current: 115 A - Total connection: 65 kW - Core pulls: 1x - Hot runner control points: 6x - Temperature control unit interfaces: 6x (20 mA) - Approved for high temperatures  ...

1 ALVE rimeless hydro extractor type LUH 1500, year 2017, basket diameter 1500 mm, basket height 800 mm, max. loading capacity 400 Kg, inverter controlled up to 750 rpm, 24 kW, 400 V, 50 Hz, electronic brake system, machine supplied with loading winch

Universal lathe, little used Model: SN 710S x 1500 Make TRENS SK Accessories: Digital Display 4 Jaws Face Plate Coolant tank

Various machines for laboratory use and pilot processes are available. 1) 2x Bioreactor system B. Braun Biotech Biostat 15L/Biostat C-CDU, year of construction: 2001, useful volume: 15l, control: Biostat C-CDU 1137. 2) Forced-air drying cabinet Heraeus (Kendro) UT 20, useful volume: 210l, internal dimensions X/Y/Z: approx. 610mm/510mm/680mm, max. temperature: 250°C, machine dimensions X/Y/Z: approx. 770mm/940mm/800mm. 3) Ultra cryostat Lauda K 75 with a cooling thermostat Lauda RUK 40S, bath volume: approx. 30l, min. temperature: -90°C. 4) Centrifuge CEPA 8L G, year of construction: 1985, speed: 17000rpm, drum diameter: 125mm, max. filling capacity: 10kg, power: 2.2kW. Documentation available. An on-site inspection is possible. Sale of individual units possible.

General SKU366W1292 LocationBarneveld MakeSihi TypeLELY 150 Mach.No.D-3209137 Main Features MaterialStainless steel Motor4 KW Specified Features - Vacuum pump MaterialStainless steel 1.4829 Pumpcheck Number of pumps:1 With motor4kW,400V (EX) Inletcheck Outletcheck Information Year of construction1989 Mounted on framecheck Total height1,15m Floorspace1,0x1,5m Weight450kg ATEX compatiblecheckVacuum pumpsSihiPumps > Vacuum pumpsBrand > Sihi What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU366W1289 LocationBarneveld MakeSihi TypeLela 150 Mach.No.B55.41 Pressure Working pressure0.033 Bar Main Features MaterialStainless steel Volume170000 Ltr. Motor4 KW Specified Features - Vacuum pump MaterialStainless steel 1.4829, Stainless steel 1.4306 (304L) Pumpcheck Number of pumps:1 Capacity170 m3/h With motor4 kW, 380 volt, 1435 rpm, (Ex) InletDN50 OutletDN40 Information Year of construction2002 Mounted on framecheck Total height1,10 m CEcheck Floorspace1,40x1,10 m Weight660 kg Extra Specificationswith stainless steel tube condensor, pressure tube 6 bar, filter vesselVacuum pumpsSihiPumps > Vacuum pumpsBrand > Sihi What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Plea ...

General SKU001Z004 LocationBarneveld MakeTerlet No.81 122 Year of construction1981 Main Features MaterialStainless steel Volume150 Ltr. Motor1.3 KW Specified Features - Stirring vessel MaterialStainless steel Closed stirring vessel(1x) Capacity150 Ltr Vessel sizesdia. 640x590mm, Flat bottom Dished top sidecheck With covercheck Outletdia. 25mm Max. temperature100 Degr. C. Motor0,88/1,3 KW, 380 Volt Information Mounted on legsMounted on wheels With switchcheck Floorspace1,2x0,8 M Total height1,5 M Extra Specifications- Stirrer equipped with scrapers (bottom drive) Technical specs Extra informationFlat bottomStirring vesselsTerletStirring vessels > Stirring vesselsBrand > Terlet What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect t ...

General SKU379W1132 LocationBarneveld MakeUniequip TypeUnichromat 1500 Mach.No.8765 Main Features MaterialStainless steel Motor0.79 KW Specified Features - Miscellaneous MaterialStainless steel Capacity1500 l. Motor0,79 kW, 1233 watt, 230 volt Information Year of construction2003 Total height2,08 m CEcheck Floor space1,45x0,80 m Weight250 kg Extra SpecificationsR404a, chamber dimensions 145x128x67 cm, allowable temperature +1°C to +18°C The Unichromat HO_1500 BEM/S is a two-door chromatography refrigerator with glass doors, 2 double sockets in the interior, 1 reinforced and pull-out stainless steel platform and 2 stainless steel platforms that can be adjusted in height. In addition, both side walls are equipped with a large cable entry of 40 mm. The double-door refrigerator is easy to move thanks to the castor wheels. Temperature range: +1°C to +18°C Cooling Syste ...

General SKU397X1085 LocationBarneveld MakeLauda TypeTR 150 K Mach.No.HKS10 119 Pressure Working pressure6 Bar Main Features Heating (medium)Electric Capacity1.5 KW Temp.80 °C Specified Features - Temperature control unit MaterialCopper, Stainless steel 1.4541 (321), Stainless steel 1.4571 (316Ti) Temperating machinecheck Water heatercheck Heating medium:Water/Glykol (60:40) Heating capacity1.5 kW With coolingcheck (Water/Glykol (60:40)) Temperature-20/80 °C Tank capacity80 Ltr. With pumpcheck Capacity± 10–12 m³/h Motor1,1 kW With controlcheck (as is) Information Year of construction2010 Mounted on framecheck With switchgearcheck Total height1,05 m CEcheck Floorspace0,69 x 1,32 m Weight450 kg Extra SpecificationsHeat Transfer Circuit Design temperature: –20 °C to +80 °C Design pressure: –1 bar to +6 bar(g) Delivery pump: WILO Type: BL32/210 ...

We offer a refurbished rotary lobe blower Brand: Robuschi Type: K 150 All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

Linear drive, toothed belt axis, stroke1500, EGC-120-1500-TB-KF-0H-GV, 556815, Festo, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Festo linear drive, toothed belt axis, linear module, EGC-120-1500-TB-KF-0H-GV, 556815, Overall dimensions: 2050x120x120mm, approx. 60kg, carriage 300x70mm, stroke 1500mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for  ...

Belt withness; 1.500 mm. (new belt) - With new control-unit . Eddy current separator is overhauled, sandblasted and painted.

Size: 1.500 x 4.500 mm - Decks: 4 - Included: Electrical motor and springs (Frame not included)

Widthness: 1.500 mm - 6 Decks - 2 Pcs. Unbalance Motors (3,6 kW / 1.430 RPM) - With frame and springs

We offer OSB boards in second choice here. (The plates are only handed in by parcel. Single plates cannot be purchased) Currently available in stock: approx. 10 packages The scope of delivery includes: OSB boards, second choice Item number: OSB10 Overall length: 2,440 mm Total width: 590 mm Thickness: 12 mm Panel size in m²: approx. 1.44 m² Total m² / package: approx. 216 m² Design: tongue and groove Number of pieces in the package: 150 pieces Base price m²: 9,03 € incl. 19% VAT Hint: It is a special item in the second choice, there may be damage to the OSB boards. Your contact persons in our company: Mr. Falk German Mr. Mario Klöver Mr. Andre Evering General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately  ...

Buhler MTMA 15/150 D A double separator cleaner Oscillating frame box Removable internal frames dim. 15001300 x 2 upper, removable inner frames dim. 15001500 x 2 lower, with cleaning balls, mounted on metal frame, transmission parts, indirectly motorized overhauled and painted. In addition, we also have our own calibrations

Type: MA16000/15800 Monitor: KEBA V3 Year : 2011 Screw diameter: 140 mm Shot volume: 9683 cm3 Injection weight : 8825 g Bettween tie bar HxV: 1550 X 1430 mm Maxi Mold Height: 1500 mm Min Mold Height: 700 mm Ejector stroke: 400 mm Total Clamp Open daylight: 3100mm 4 corepulling 4 Cascade Injection

General SKU412X1249 LocationBarneveld MakeSchenck TypeC3000-150-G No.V093650.A01 Main Features MaterialStainless steel Motor0.37 KW Inlet diameter110 mm Specified Features - Metering screw MaterialStainless steel 1.4301 (304) Metering screws Metering screwcheck Screw diameter50 mm Pitch47 mm Screw length700 mm With hoppercheck Hopper sizesø 400 x 500 mm Inletø 110 mm Outlet60 mm Screw speed69 rpm Motor0,37 kW (Ex) With vibro motorcheck (flexible wall) Hopper with flexible wallcheck Information Year of construction2015 Floorspace1,2 x 1,1 m CEcheck Total height1,5 m Weight230 kg ATEX compatiblecheckMetering screwsSchenckDosing units > Metering screwsBrand > Schenck What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mac ...

5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 9,000 mm Y-axis travel: 1150 mm Travel Z-axis: 715 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Minimum quantity spraying Tensioner detection and automatic displacement 12 pneumatic material tensioners Pendulum operation through two light barrier areas Manual control panel Loading is included in the price Weight: approx. 8,500 kg

The SIP 150-6 screw impeller pump is designed and built to meet the needs and demands of much of the world without the need for advanced technologies. This mobile pump unit is the simplest and most basic version in our range of 6″ screw impeller pumps., The Budget configuration is a typical old-fashioned mechanical configuration, has a direct-drive vacuum pump with V-belt without electromagnetic clutch, so the vacuum pump always works even if the screw pump has water., This configuration has no level control, and the speed must be adjusted manually via the throttle lever on the engine., This pump is as basic as you could want... Start/Stop with a switch and the RPM has to be adjusted manually. Equipped with float switching though !, However, the pump unit is completely autonomous and equipped with all the elements that Impulse always offers., It is equipped with its own fuel tank and o ...

Rolling mill, used Type : W 150 AP Manufacturer : Dr. Collin GmbH Drive : 14 KW Roller diameter : 150 mm Roller width : 400 mm;

Manufacturer:Mechatronic Model: mWL 150 square Year of Manufacture: 2019 Weight: 1000 kg Electrical specifications: - Supply: 230 VAC, 50–60 Hz - Supply lead: 3 × 4 mm² L1/L2 (N) / PE - Control voltage: 24 VDC - Full load current: 32 A max - Fuse type: C32A High Inrush Find more here - / Contact us at -

sheet width: 1530 mm plate thickness: 4.0 mm thickness at Niro-steel: 2.0 mm no. of strokes: max. 34 Hub/min cutting angle: 2.70 Grad distance between columns: 1540 mm work height max.: 920 mm voltage: 400 V Control: konv. engine output: 3.2 kW weight of the machine ca.: 1115 kg. range L-W-H: 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions Optional accessories included: - Sheet metal holding device for thin sheet metal blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 10249 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 160 Kw, Rated Speed: 1500 Rpm, Injection Type: Electronic Fuelpump (EDC) , Generator KVA: 200 , Generator Hz: 50 , Generator Volts: 400/230 , Generator Amps: 289 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/perkins-1500-pk51589-generator -200-kva-used/72, , = More information =, , Empty weight: 4.775 kg, Type number: 1500 PK51589 GENERATOR 200 KVA

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Rated Power: 1257 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 1500 , Generator Hz: 50 , Generator Volts: 660 , Generator Amps: 1312 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/stamford-hc-m734h2-generator-1 500-kva-used/370, , = More information =, , Type number: HC.M734H2 GENERATOR 1500 KVA

SOREMA MODEL SA-1500 ASPIRATOR (ELUTRIATION) SYSTEM; APPROX. 58" WIDE X 17' HIGH, CYCLONE, AIRLOCK (NEW 2016)