sr 15 6 used for sale

grinding diameter max.:400 mm max. width of grinding wheel:180 mm grinding range:2-100 mm total power requirement:24 kW weight of the machine ca.:3,2 t Out of valve production

Leather splitting machine Camoga C 520 L with 50cm working width

Leather splitting machine Camoga Cn 412 with 40cm working width

Diámetro de la muela principal 250 mm Diámetro de la muela auxiliar 200 mm Unidad de diamantado Esmerilado de alimentación pasante Filtro de papel Diámetro máximo: 50 mm

Safety Relay Elan SRB-NA-ST99-24VDC STAMA MC 325/S Manufacturer: Elan Type: SRB-NA-ST99-24VDC Condition: used Dimensions: 90×85×125 mm Weight: 0.57 kg Origin: STAMA MC 325/S Price: (plus VAT)

Safety Relay Elan SRB-NA-ST99-24V STAMA MC325/S Manufacturer: Elan Type: SRB-NA-ST99-24V Condition: used Dimensions: 90×85×125mm Weight: 0.57kg Removed from: STAMA MC325/S Price: (plus VAT)

vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 Fpobmafvewav R Sjpxok vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition!

Flywheel diameter: 700mm, worktable dimensions: 694x1010mm, cutting capacity: 430x680mm, flywheel width: 40mm, band speed: 2800/min, flywheel speed: 782/min, saw band length: 5040-5190mm, motor power: 4HP, connected load: 3kW, noise level: 82 dB(A), net weight: 375kg. An on-site inspection is possible.

Specifications: Procedure: 2-stage Filter area: approx. 17 m² Separation efficiency: >99% Welding Fume Separation Class: W3 Extraction capacity: 1100 m³/h Diameter of extraction arm: 150 mm Length of extraction arm: 3 m Power connection: 3 x 400 V Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions, approx.: 785 x 730 x 950 mm Weight, approx.: 106 kg Characteristics: - Made in Germany - For low to medium smoke/dust quantities - Suitable for occasional to frequent use - Convenient filter change through maintenance door - Extraction hood can be rotated and swivelled 360 degrees Equipment: - 3 new replacement main filters (original price approx. 330 euros each) - 7 new replacement pre-filters - 2 extraction hoods (one of them unused)

Max. load capacity: 2t, tilting angle: 180°, voltage: 400V, connected load: 4.25kW, compressed air connection: 6bar, CE marking: available. Tilting mechanism: chain-driven with large drive sprocket, hydraulically assisted for safe and controlled tilting process, designed for complete turning of containers (180°). Receiving container: yellow container, specially secured with retaining brackets and locks. Operation: electrically controlled with safety interlock. With documentation. An on-site inspection is possible.

ID3648 Willibald SR5000 year/Bauahr 2001 approx. 7150 hours/hours 18 t Shredder for wood/green waste, magnetic separator Shredder for wood/green waste, magnetic separator

Manufacturer: NIDEC SANKYO Model: SR8220-019 Year of Manufacture: 2008 Type of Machine: 200mm THIN WAFER Loader NSX Condition Good Weight 1,433 lb (650 kg) Find more here - .ucymachines/ Contact us at - sales@ucymachines

GOUDSMIT SRTK permanent drum magnet 150 x 400 mm approx. 35 m³/h Geared motor 0.37 kW Extractor 3,000 Gauss

Circular screen feeder with a maximum filling volume of 1,000 l.; Motor power spread arm: 15 kW; Motor power turntable: 0.55 kW. Container diameter: 1200 mm; Plate diameter: 1600 mm; Hopper diameter at the top: 1400 mm. Discharge height: Approx. 730 mm; Screen height: 300 mm / Perforations: 30 x 15 mm (oval). Spreading arm provided with scraper plates made of Hardox. The scope of delivery includes a control cabinet with frequency converters for regulating the speeds of the platter and spreading arm.

General SKU326W689 MakeVibra TypeSRK 8/12-I-S-DV LocationBarneveld Main Features MaterialStainless steel Surface0.63 m2 Size length700 mm Sizes width900 mm Sizes diameter6 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,63m³ Number of sieve decks:1 Sieve sizes700x900 mm Inlet1130x2250 mm Outlet800x1150 mm Drive vibro motor2x Motor0,70 kW, 218-240 / 380-420 volt, 1450 rpm Sieve perforation7 mm MaterialStainless steel 1.4301 (304), Stainless steel 1.4306 (304L) General No.41498/1 Year of construction1999 Mounted on mild steel framecheck Floor space2,0x2,0 m Total height1,60 m Weight801 kgConsumer wastePowdered foodsGeneric medicinesTea, herbs & coffeeStarchRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersVibro sievesCatalysts & fillersFeed additivesOrganicsPaper & otherDetergent & surf.CosmeticsE-waste & metalFood additivesSugarAnima ...

General SKU234S117 MakeBühler Cobra 251V TypeRWK 251 / SRK 175 No.10078796 Year of construction1979 LocationBarneveld Main Features MaterialStainless steel Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 220x690mm Inletdia. 25mm Outlet75x35mm Motorcheck MaterialStainless steel General With switchgear(as is) Floorspace1,6x0,9 M Total height1,9 M Weight1100 KgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Chemical > Dyes & p ...

Engine Brand: ARMSTRONG, Condition: USED, Engine Cooling Type: Air Cooled , Engine Color: Red , Working Hours: 38 Hour(s), Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 16.5 Kw, Rated Speed: 2900 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/armstrong-srt25653-pump-121l-min-us ed/17879, , = More information =, , Type number: SRT25653 pomp 12,1L/Min

Offered are 2 fully automatic stand-alone stencil printers for SMD assembly technology, PCB assembly year 2010. Fully automatic vision system, Linux-based operating software, double loading system, motorized table drive, large printing area X/Y 440mm/440mm, frame size X/Y max. 670mm/700mm, PCB thickness max. 6mm, cycle time approx. 18-25 sec., product changeover time < 5 min., squeegee pressure 4-24kg programmable, snap-off/separation speed programmable, compressed air supply 6bar approx. 60l/min., dimensions X/Y/Z 2080mm/1130mm/1450mm, signal tower 2000mm, weight approx. 285kg. Inspection possible by appointment.

FEEDSTOCK STEEL STRIP   sheet thickness max.: 4 mm PRODUCT (PROFILE, TUBE)   external diameter max.: 51 mm specifically suitable for the welding of USM furniture tubes -Large reel without storage -Strip welding device -Side planer -Calibrating roll stand -Forming unit -HF welding unit THERMOTOOL -Unit for scraping without tools -Cooling section -Calibrating unit -Flying saw -Removal section for manual removal -Roller sets for 19, 20, 25, 35.9, 36, 37, 40.8, 41 mm -Various accessories and machine-specific spare parts -Documentation and maintenance logs -CE declaration

General SKU418W1320 MakeDe Dietrich LocationBarneveld TypeSR-250 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialGlass Type of tumble dryerdrum-dryer Volume285 Ltr. Motor0.75 KW Specified Features - Tumbler dryer Double cone tumbler dryercheck Capacity285 Ltr Diameter772mm Cylindrical length344mm Conical length293/168mm Inlet/man hole dia. 400mm Outletdia. 200mm With jacket(90 Ltr) Max. temperature-30/+200°C Motor0,75 KW, 400 Volt (Ex) MaterialGlass - Enamel (3009U) With jacketcheck General No.25394 Year of construction1997 Floorspace2,5x1,2 m Total height2,8 m Weight1700 kg Extra Specificationsthe vacuum arm inside is made of material 2.4951Powdered foodsGeneric medicinesStarchBiotechnologyAgrochemicalsCatalysts & fillersTumbler dryersFeed additivesOther pharmaceuticsC ...

General SKU368U993 LocationBarneveld Makehaagen &: Rinau Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume2614 Ltr. Motor55 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacitynetto 2000Ltr (bruto 2614Ltr.) Vessel sizesø 1380 mm x 1500 mm Conical bottomcheck Dished top sidecheck With covercheck Manholeø 450 mm Top connectionsDN100, DN25, DN11 OutletDN50 With jacketcheck Max. temperature151°C With paddle stirreragitator with mating blades and with scrapers Counter rotating stirrercheck Motor15kW, 380Volt. Speed mixing shaft6,3-38 rpm With homogeniser500-2540 rpm Motor55kW, 380Volt MaterialStainless steel 1.4571 (316Ti) With jacketcheck General No.851 4331 Year of construction1993 Mounted on legscheck Floorspace1,7 x 1,7 m Total height4,5 m Weight ...

Key data: 3000 mm, 8 mm

3-roll bending machine / round roller Schäfer SRMVHY – fully functional For sale is a used 3-roll bending machine (round roller / sheet metal bending machine) from the manufacturer Schäfer, model SRMVHY, built in 1992. The machine is in fully functional condition and is ready for immediate use. The rollers are hydraulically adjustable, which allows for precise and comfortable adjustment. The round bending machine is ideal for bending sheet metal in workshops and production plants. Technical data: Manufacturer: Schäfer Model No.: SRMVHY Year of Make: 1992 Max. sheet width: 3,000 mm Max. sheet thickness (mild steel): 8 mm Roller diameter: approx. 200 mm Voltage: 380 V Dimensions (L x W x H): approx. 5,300 x 1,800 x 1,300 mm Condition: used, fully functional Equipment: hydraulically adjustable rollers Changes and errors in the technical data, ...

Exhibition MachineProfessional Wood Professional Commercial and Industrial Surface Planing Machine for Professional Use. The machine is characterized by its stable construction and good operability. CE-compliantTechnical data:Dressing table length 2750 mmDressing table width 550 mmPlaning width 530 mmPlaner blade 4 pcs 550 x 35 x 3 mmKnife shaft 120 mmChip removal max. 7 mmLength stop ruler 1300 mmMotor output power S1 4 kW, 400 VAnflung swivel 0-45Suction connection 150 mmWeight 570 kg

Pasteuriser and Operating Panel Manufactured by APV Consisting of APV heat exchanger, holding tubes, pump and control panel with chart disc recording Output 200 BBL/320HL Complete with: 30BBL/49HL sterile beer tank Side entry manway Insulated and clad in stainless steel 2BBL/300 litre sterilising tank This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

ID3710 O&K SRB100 year/Year of construction ca. 1982 55 t Bucket wheel excavator, overhauled with a new bucket wheel and new excavator buckets in 2013. Worked for only a few hours after the overhaul, some of the excavator buckets are now missing.,Bucket volume 100 Liter, Conveyor width 800 mm, theor. Output 500 cbm/h, Electric power installed 190 KW, Bucket wheel diameter 4000 mm, Bucket wheel drive power 75 KW, Length of bucket wheel boom 6000 mm, Length of discharge boom 10.000 mm Bucket wheel excavator, overhaul and new bucket wheel and new excavator buckets in 2013. Only a few hours after overhaul, some of the excavator buckets are now missing. Bucket volume 100 litres, conveying width 800 mm, theoretical flow rate 500 m³/h, installed electrical power 190 kW, bucket wheel diameter 4000 mm, bucket wheel drive power 75 kW, bucket wheel boom length 6000 mm, boom length 10,000 mm

General SKU390X1002 MakeVibra LocationBarneveld TypeSRK 12/6-II-V Main Features MaterialStainless steel Surface0.7 m2 Size length1200 mm Sizes width600 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,70 m² Number of sieve decks:2 Sieve sizes1200 x 600 mm With covercheck Inletø 150 mm Outletø 200 mm Drive vibro motorcheck Motor2x 0,44 kW, 475-525 volt, 1425 rpm Sieve perforationø 7 mm, 2 mm MaterialStainless steel General No.52697.002 Year of construction2006 Mounted on stainl. st. framecheck Floor space2,00x1,30 m Total height1,10 m Weight470 kgConsumer wastePowdered foodsGeneric medicinesTea, herbs & coffeeStarchRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersVibro sievesCatalysts & fillersFeed additivesOrganicsPaper & otherDetergent & surf.CosmeticsE-waste & metalFood additivesSugarAnimal feedOther feedConfectionerySolid phar ...

General SKU390X1044 LocationBarneveld CEcheck MakeVibra TypeSRK 12/6-II-V Main Features MaterialStainless steel Surface0.7 m2 Size length1200 mm Sizes width600 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,70 m² Number of sieve decks:2 Sieve sizes1200 x 600 mm With covercheck Inletø 150 mm Outletø 200 mm Drive vibro motor2x 0,44 kW, 475—525 volt, 1425 rpm Sieve perforationø 7 mm MaterialStainless steel General No.48721.002-4 Year of construction2006 Mounted on mild steel framecheck Floor space2,00x1,30 m Total height1,10 m Weight470 kgConsumer wastePowdered foodsGeneric medicinesTea, herbs & coffeeStarchRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersVibro sievesCatalysts & fillersFeed additivesOrganicsPaper & otherDetergent & surf.CosmeticsE-waste & metalFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceut ...

An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling wate ...

General SKU234S120 MakeBühler Cobra 501 TypeSRK 440 No.10310050 Year of construction1999 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/690 Volt MaterialStainless steel General With switchcheck Floorspace2,1x1,5 M Total height2,9 M Weight2650 KgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Chemical  ...

General SKU253S172 MakeBühler AG (CH) TypeCobra 201, SKR 440 No.10194572 Year of construction1990 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 volt MaterialStainless steel General Floorspace2,1x1,1 M Total height2,7 M Weight2650 KgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Chemical > Dyes &  ...

General SKU234S124 LocationBarneveld MakeBühler Cobra 501 TypeSRK 440 Main Features MaterialStainless steel Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm MaterialStainless steel General No.10.164.371 Year of constructionunknown Floorspace2,3x1,3 M Total height2,9 M Weight2600 KgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Chemical > Dyes & pigmentsIndustries > Chemical > Minerals  ...

General SKU234S116 MakeBühler RWK 501 TypeSRK-440 No.10226398 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia 35mm Outletdia. 35m Motor55 kW 380 Volt MaterialStainless steel General Floorspace2,4x1,3 M Total height2,7 M Weight2650 KgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Chemical > Dyes & pigmentsIndustries > Chemical > Minerals &  ...

General SKU234S118 MakeBühler Cobra 251 TypeRWK 251 / SRk-175 Year of construction1981 LocationBarneveld Main Features MaterialStainless steel Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 220x690mm Inletdia. 25mm Outlet75x35mm Motorcheck MaterialStainless steel General With switchgear(as is) Floorspace1,7x0,9 M Total height1,9 M Weight1200 KgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Chemical > Dyes & pigmentsIndustr ...

General SKU234S123 MakeBühler AG TypeRWK Cobra 501/SRK-440 No.10257153 Year of construction1995 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 400/690 Volt MaterialStainless steel General With switchgear(as is) Floorspace2,3x1,2 M Total height2,9 M Weight2850 KgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustrie ...

Hello, We hereby offer you a used, self-propelled stretch wrapping machine (pallet wrapper), manufacturer PKG, type Motion. Manufacturer PKG SRL Model Motion Year of manufacture 2018 Max. circumference speed: 93m/min. Battery equipment: Standard AGM/Gel batteries 12V – 110Ah, both batteries were replaced at the end of last year. Charging cycle 8-10 hours Pallet dimensions: min. 500 x 500mm, max. unlimited Max. winding height: 2,200mm Min. winding height: 500mm Turning radius: 1,100mm Electr. Battery charger connection: 230V, 50Hz Charger: High frequency charger in the machine Machine weight: approx. 400kg Slide: Film Type: Machine Stretch Film Roll diameter: max. 250mm Roll height: 500mm Roll weight: ~20kg Note: The aforementioned technical data have been taken from the operating instructions, brochures of the manufacturer or other sources, for which we c ...

We are offering for sale a cable recycling plant .The plant is composed of the following elements: Main Granulator - Manufacturer: IRS SRL - Model: Easy - Type: 180 - Installed power: 8.8 kW - Year of manufacture: 2021 - CE certified Pre-Shredder - Manufacturer: ISVE - Model: MS 2260 Matching Conveyor Belts Find more here - .ucymachines/ Contact us at - sales@ucymachines

Gear grinding machine HURTH SRS 400

Tetra Top Sprue Remover Unit (SRU) for removal of the small plastic particle on top of the Tetra Top packaging after filling/closing, previously positioned after a Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including stainless steel control panel and separate operation panel., Type of Machine: Sprue Remover Unit, Capacity: 4.500 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0100, Drawing Spec.: 3434618-0100, Weight: ± 325 kg

Tetra Top Sprue Remover Unit (SRU) for removal of the small plastic particle on top of the Tetra Top packaging after filling/closing, previously positioned after a Tetra Pak TT/3 2000 carton filler for Tetra Top 200 and 250 ml Mini cartons with a A5 38 screwcap. Including stainless steel control panel and separate operation panel., Type of Machine: Sprue Remover Unit, Capacity: 4.500 pieces per hour, Type of carton: Tetra Top 200 and 250 ml Mini cartons, Development step: - 0100, Drawing spec.: 3434618-0100, Weight: ± 325 kg

Positioning ring, clamping ring, clamping pallet, short taper, shuttle table -Type: SRB 120 -for: NSA plus static tethering station -both sides: ground -Clamping rings: with ground short cone for positive locking connection of the clamping pallets or devices with the clamping modules. -Form-fit connection: between clamping pallet and NSA plus clamping station. -Quantity: 25x available Price: per piece -Dimensions: Ø 118/H19 mm -Weight: 0.8 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Varvel, 2-speed geared motor -Transmission: Type: SXA063801114 i=8 / SRS04028G319 i=28 -Speed: 7 rpm -Motor: Leroy Somer 0.09 kW -Voltage: 230 V 1400 RPM / 380/400 V 1380 RPM -Protection rating: IP55 -Shaft: Ø 19 x 28 mm -Design: B3 -Dimensions: 355/130/H165 mm -Weight: 7.4 kg

Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer: Varvel, Gearbox type SRS02810G314 -Speed: 138 rpm i=10 -Engine: Leroy Somer type LS56M/T 0.09 kW -Protection rating: IP55 -Hollow shaft: Ø 14 x 60 mm -Design: B14 -Dimensions: 250/110/H145 mm -Weight: 4.4 kg

Operating unit, control panel, control panel, operating unit, keyboard, screen, control, handheld terminal, operating element -Manufacturer: Bierrebi LEA SRL. Control module from Bierrebi TA 103 automatic cutting machine. -Board: LEA SRL. Type LEA 1032 2.028.01.065.01 -Dimensions: 370/90/H28 mm -Weight: 0.4 kg

Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1004 2.028.01.063.02 -Dimensions: 400/100/H50 mm -Weight: 0.4 kg

Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01 -Dimensions: 330/125/H50 mm -Weight: 0.9 kg

Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1000 LEA 1002 -Dimensions: 265/125/H100 mm -Weight: 2.0 kg

Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1000 LEA 1002 2.028.01.057.02 -Dimensions: 265/125/H100 mm -Weight: 2.0 kg

Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01 -Dimensions: 360/130/H60 mm -Weight: 1,3 kg

Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1016 2.028.01.061.02 -Dimensions: 360/130/H60 mm -Weight: 0.4 kg