sr 15 6 used for sale

T-slot plate, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 1500/3510/H950 mm -Plate thickness: 20 mm -Plate is: with supporting ribs -1x T slot: 18 mm -with: detachable stop -Weight: 2600 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Dimensions: 153/76/H132 mm -Weight: 6 kg

Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube -for: scribing plate, clamping plate -Dimensions: 151/78/H132 mm -Weight: 6.2 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 300 mm -Depth: 150 mm -Edge: 17 mm -Drain: Ø 52 mm -Number: 7x available -Price: per piece -Dimensions: 340/H150 mm -Weight: 2.1 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 150 mm -Edition: gray cast iron -Hole spacing: 420 mm -Tip height: 210 mm -Drawing with the photos -Dimensions: 500/485/H80 mm -Weight: 18 kg

Drawer slide, telescopic slide, drawer extension, drawer rails, drawer extension, telescopic slides, extension rails -1 set right and left -Extendable: up to 2850 mm -Price: complete -Dimensions: 1500/15/H75 mm -Weight: 15 kg

Proximity switch, proximity sensor -Manufacturer: Festo, proximity switch unused Ovp -Type: SME-8-K-LED-24 150 855 -Number: 22x available -Price: per piece -Weight: 0.1 kg/piece

Pipe sealing cushion, leak sealing cushion, sealing plate, pipe seal, shut-off ring -Pipe sealing cushion: DN1600 -Diameter: 1560 mm -without: rubber seal -Dimensions: 1560/H290 mm -Weight: 255 kg

Ref. -No.: 10314 Manufacturer: PINACHO Year of construction: 2005 Type of control: Konventionell Storage location: Halberstadt Country of origin: Spain Travel quill: 180 mm Turning Diameter: 630 mm Turning Length: 3000 mm Turning Diameter Over Bed: 620 mm Cross Movement. (X-Axis): 365 mm Tailstock Quill Diameter: 72 mm Turning diameter over cross slide: 880 mm

Ref. -No.: 10301 Manufacturer: TITAN Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: USA Max. Grinding length: 1.500 mm Max. Workpiece Weight: 300 kg Grinding Diameter: 350 mm Max. Dia. Of Grinding Wheel: 280-500 mm Grinding Wheel Width: 80-100 mm

WITH COUNTING STATION M. No.: 3.65-00001 Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station -Discharge belt

Kemper Spiral Kneader Type: SP 150 A Specifications: 2 automatic timer switch-on and switch-off 2 speeds slow and fast with 2 stainless steel boilers Automatic feeding of the vats Stainless Steel Boiler and Spiral with flour dust cover square head Boiler capacity approx. 250 litres Machine has been overhauled and repainted Electronics new All bearings new All straps new New friction wheel Wear parts all new Engine mounts all new Push button new Rollis new Hydraulic oil new completely repainted

grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: m Overhauled and modernized machine -DRO in x and z-axis -New BEMA tailstock with 0,1mm cylinder compensation -Park position for the tailstock -New automatic switch off when diameter is reached -Automatic switching from rough to finish grinding -Finish grinding feed electrical infinitely variable from 0-100% -Modernized infeed handwheel like on the new machines -swiveling operator panel -Splash doors -coverd x-axis with possibility to set an exhauster on top -New internal grinding device like on the new model -new hydraulic aggregate -New electric cabinet -Scontrol voltage 24V instead of 220V Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrS ...

faceplate diameter: 1400 mm turning diameter over slide rest: 1400 mm centre distance: 1500 mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch

Key data: 50 mm, 1500 mm, 1400 mm

Code 231017 Description Radial drilling machine Make MEUSER + CO Model M 50 R Serial No. 39112 Year Capacity in Steel 60 50 mm Capacity in Cast Iron 60 mm Thread cutting in Steel 60 M 45 Thread cutting in Cast Iron M 55 Spindle taper 5 MC Spindle radius: max/min 1700/600 mm Spindle traverse 1100 mm Min / Max height spindle / top of base plate 500 / 1400 mm Arm truss 600 mm Quill stroke 310 mm Number of speeds 18 Spindle speed range 25 – 2000 rpm Number of spindle feeds 14 Spindle feed range 0.06 – 0.80 mm/rev Baseplate size 2400 x 860 mm Clampsurface base plate 1700 x 860 mm Main motor 5 kW - 380 Volts Dimension of machine 2400 x 1100 x 2800 (3100) mm ( L x W x H ) Weight 4070 kg Accessories Box 650 x 500 x500 mm Coolant Hydraulic clamping Conditon Machine is in very good and nice condition

IMAC Plasma Cutter Working range 3000x1500 Workable thickness 15/20 mm. complete with vacuum cleaner Updated Software CD

ship propeller, propeller -ship propeller: Propeller, material bronze -Condition: refurbished condition -Outer diameter: 1520 mm -Height: 410 mm -Conical bore size: Ø101/123 mm -Weight: 333 kg

Hydraulic Press, Oil Hydraulic Press, Pressing Machine -Manufacturer: Novopress, Hydraulic unit for press machine -Pressure: max. 150 bar -Type: unfortunately no type designation -Accessories: see photos -Total dimensions: 410/310/H440 mm -Weight: 19.1 kg

Pre-filter, intake air filter, air filter housing, air filter housing, generator air filter, adapter tube, pipe bend -Manufacturer: Mann, elbow 90° Ø 150 mm -Total dimensions: 360/220/H155 mm -Number: 8x sheets available -Price per piece -Weight: 1.5 kg

Level indicator, sight glass, steel reflector, sight glass fitting, sight glass device -Manufacturer: Eriks, Econ Level Indicator -Type: FIG. 1590 -Test pressure: 3 bar -Number: 2x level indicators available -Price: per piece -Dimensions: 100/60/H3050 mm -Weight: 25 kg/pc.

Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Hand lever shears: Sheet metal and round steel shears -Cutting insert length: 200 mm -Overall dimensions: 380/160/H1160 mm -Transport dimensions: 830/160/H500 mm -Weight: 25 kg

chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300

Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Manufacturer: Gast, rotary vane vacuum pump type 1550-V2A -Vacuum: measured -0.7 bar -Overall dimensions: 600/250/H385 mm -Weight: 30 kg

Boekels EWK 1500 PLUS WS1,25kSD inline checkweigher with reject device, weight range up to 1500 g (working weight up to 1250 g), calibration value e=0.2 g, accuracy +/- 0.2 g, belt width approx. 150 mm, length of infeed belt approx. 300 mm, length of outfeed belt approx. 300 mm, length of weigh cell approx. 300 mm, belt speed up to. 0.5m/s, capacity up to 100 weighings per minute, electrics 230V/50Hz, connected load 600 VA, machine floor space approx. 1050 x 1020 mm (WxD), machine height approx. 1700 mm, machine net weight approx. 245 kg

Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Manufacturer: DEC, ventilation hose, original packaging -Type: Greydec 100 - 152mm x 6 meters -ART.code: DG1152/6 -Cardboard dimensions: 400/175/H175 mm -Weight: 1.7 kg

ABUS ELKE - ELV 5t / 15m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : DEMAG IR-H 10 radio control Wingspan : 15000 mm Chassis (sides): 3220 mm, are removed Load capacity : 5000 kg Tare weights : approx. 3950 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.

Universal Rotor Shears UC 1500 Power 2x55 kW Cutting unit ejection opening: (width x length) 1124 mm x 1520 mm Rotor shaft speed 1: 16 rpm Rotor shaft speed 2: 16 rpm Knife width: 70 mm Number of Knives-4 EZN Infeed Lugs Incl. hopper, pusher without hydraulic unit

sheet width: 1570 mm plate thickness: 10 mm pre-bending: 8 total power requirement: 7 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 3,5 x 1,5 x 1,55 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Die holder, notching tool, punching tool, punch, punch die, punch stamp, punching die, rotary die -Manufacturer: Mubea, die-cutting die, round die Ø 52 mm -Type: Mubea 52 -Overall dimensions: Ø 150 x 40 mm -Weight: 4.7 kg

Die holder, notching tool, punching tool, punch, punching die, punching die, punching die, round die -Manufacturer: Mubea, punching die round die Ø 75 mm -Type: Mubea 75 1 5 -Total dimensions: Ø 150 x 40 mm -Weight: 3,9 kg

Slewing bearings, slewing ring, single-row ball bearing, four-point contact bearing, gear ring, steering ring, -Slewing bearings -Type: Drawing No. 281.30.1200.013.11.1503 -Dimensions: see photos -Dimensions total: Ø 1395 x 90 mm -Transport weight: 240 kg

Transversal Sheet metal Stiffening machine ALMORE type DS RT 1500 Year of construction:1988 Capacity: 1550 x 1,5 mm Thickness: from 0,4 to 1,5 mm Speed: from 7 to 15 m/min. Foot control Length: unlimited Useful machine for making ventilation ducts Voltage: 380 V Dimensions (L x W x H): 2000 x 800 x 1500 mm Weight: approx 1500 kg

Coated steel tank Dimensions : - Depth : 2500 mm - Width : 2300 mm - Total height: 3680 mm (incl. dome) - Ground clearance: 420 mm Equipment : - Partial discharge DN 40 - Residual discharge DN 40 - Rectangular manhole 320 x 420 mm - Level indicator - Dome DN 500 mm - In perfect condition

grinding wheel diameter: 150 mm no. of working stations: 2 Stück total power requirement: 0,25 kW motor speeds:: 2900 min 1 Workshop grinding machine 0.25 kW, 400/3 V, 50 Hz., 2900 rpm, Equipped with normal corundum grinding wheels 150x25x51 mm, grain 36 PQ and 60 M, with closed, adjustable steel protective hoods and workpiece supports Includes cable with CEE plug 2 pieces of eye protection shields, size 1 140 x 150 mm, complete with bracket, €60.00 Option: - In stand version Euro 1,192.00 net - With electronically controlled countercurrent brake which the grinding wheels after switching off brakes to a standstill within approx. 3 seconds, Emergency stop mushroom button, as a table machine Euro 1,665,-- net - In stand version with brakes Euro 2,042,-- net ? The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Proximity switch, proximity sensor, position switch, socket cable, socket cable, connection cable -Manufacturer: Festo, socket cable orig -Type: 159421 RN13 -Number: 2x cables available -Price per piece -Dimensions packaging: Ø 150 x 20 mm -Weight: 0.2 kg/pc.

RUHLE / RÜHLE MPR 150 Vacuum Cooling Tumbler / Mixer Tablet control (height adjustable) Automated lid opening and closing tiltable hopper Direct cooling system Stainless steel vacuum canal, cooled Quick arm fastening Scraper, pressure assembling variable speed from 0-50 RPM vacuum system from 0-90% 150 liters tumbler capacity

Proximity switch, proximity sensor, position switch -Manufacturer: Festo, proximity switch orig -Type: SMTO-1_PS-S-LED-24C 151685 -Number: 2x switches available -Price per piece -Dimensions packaging: 150/110/H20 mm -Weight: 0.1 kg/pc.

Tailstock, counter bearing for dividing head, dividing attachment, lathe -Handover: in the current condition as seen -Bracket: cracked, see photos -Tailstock: center height adjustable, 155 to 165 mm -Dimensions: see the drawing in the photos -Dimensions: 430/175/H210 mm -Weight: 21.7 kg

Tailstock, counter bearing for dividing head, dividing attachment, lathe -Tailstock: center height 110 mm -Dimensions: see the drawing in the photos -Number: 2x tailstock available -Price per piece -Dimensions: 130/100/H160 mm -Weight: 2.7 kg/pc.

The blower stage is completely overhauled and can also be offered as a complete unit.

V-belt pulley, belt pulley -V-belt pulley: pulley 5 grooves Ø 157 mm - V-belt width: 17 mm -Intake: Ø 42 mm -Number: 1x pulley available -Dimension: Ø 157 x 114 mm -Weight: 8.1 kg

Control, control part, interface -Manufacturer: Jungheinrich, control from pedestrian stacker ERC 205 -Type: MP 1510C/6 -Mat no.: 50313640 -Voltage: 24V -Number: 1x control unit available -Price per piece -Dimensions: 245/190/H140 mm -Weight: 3.9 kg/pc.

Key data: 150 t, 2550 mm

Stock number: 3866 CNC PRESS BRAKE Manufacturer: BEYELER, Type: PR 8 150D x 3100 mm Machine NO.: 96/445/002, Year of manufacture: 1996 Specifications: Gr. bending length 3100 mm Gr. pressure capacity 150 tons Stroke length 215 mm Column passage 2550 mm Projection 305 mm Total power 7.5 kW CNC control Cybelec DNC 908 PS Presscad Fabr. Controlled in 4 axis Y1-Y2-x1-x2 axes Length: 1900 mm, Height: 2600 mm, Width: 3500 mm, Weight: 9500 kg

Conveyor belt, belt conveyor belt, metal conveyor belt, wire belt, link belt, round wire link belt, slat belt -Conveyor belt: link belt stainless steel -Width: 150mm -Length: 11500mm -Number: 2x available -Price per piece -Transport dimension: 420/400/H150 mm -Weight: 47 kg/pc.

Control, control part, interface -Manufacturer: Jungheinrich, control from order picking stacker type: ECE 20 built in 2002/2003 -Type: MP 1510 interface 2 50053044-6/99 -Voltage: 24 V -Quantity: 2 pieces available -Price: per piece -Dimensions: 170/135/H70 mm -Weight: 0.7 kg/pc.

Control, control part, interface, driving control, driving current control, inverter driving control, driving control -Manufacturer: Zapi, inverter drive control from electric forklift Sichelschmidt M 1510 V -Type: SEM-1 -Mat no.: 7020 0442 FS5002 -Voltage: 48V -Dimensions: 210/150/H70 mm -Weight: 1 kg

Refrigeration unit Bitzer 4JE-15Y-40P for TK or Plus cooling Year of manufacture 2022, like new Displacement: 63.5m3/h 33 Kw cooling capacity at minus 10°C 13 KW at minus 30°C 11 kw./15 hp. Electrical power, Amp.30.8 Refrigerants 404a, 449a, 448a, 452a,134a etc.

Chassis, electric motor, DC motor, traction motor, drive motor, steering motor -Manufacturer: Sichelschmidt, steering motor from electric forklift truck M 1510 V -Motor: Motovario 113-MP-NV-Q 48V/500W -Dimensions: 400/160/H180 mm -Weight: 17 kg

Chassis, electric motor, DC motor, traction motor, drive motor, steering valve, control block, steering motor -Manufacturer: Sichelschmidt, control block from electric forklift M 1510 V -Base block: Hawe SK 7650-HST3-Rö4 -Dimensions: 210/110/H130 mm -Weight: 4.2 kg