128,994 used machines on RESALE, but how to find them? Machine Search
Pipe sealing cushions, leak sealing cushions, sealing plates, pipe seals, breakthrough seals -Pipe sealing cushions -Outer/inner diameter: 155/115 mm -Height: 53 mm -Delivery of: steel/stainless steel cover plates possible -Number: 29x pillows available -Price: per piece -Minimum order quantity: 5 pcs -Weight: 0.3 kg/piece
faceplate diameter: 1130 mm swing diameter: 1500 mm turning height: 1100 mm faceplate diameter: mm swing diameter: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: STANKO TYPEL 1512 Build in: 1977 with pneumatick 3-jaw stuck 1130 mm max. turning diameter 1500 mm max. turning height 1100 mm Motor 30 KW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data for the compensating plate: Manufacturer: Bito (M) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 150 mm Total depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center - center hole): approx. 120 mm Weight: approx. 0.18 kg | Pcs.
Technical data for the compensating plate: Manufacturer: Bito (M) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 150 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center - center hole): approx. 120 mm Weight: approx. 0.46 kg | Pcs.
Internal quick probe, length measuring device, internal precision measuring device, internal measuring device, internal measuring probe, micrometer screw -One revolution of the drum corresponds to: 0.5 mm -Interior measuring device -Measuring range: approx. 800 - 1500 mm -Weight: 5 kg
Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: approx. Ø 80 mm -Piston rod: Ø 50 mm -Piston rod mounting: 2x Ø 35 mm -Stroke: 150 mm -Dimensions: 780/205/H135 mm -Weight: 33.6 kg
KOEPFER 151 Gear Hobbing Machine - Horizontal Available 2 machines. Semi-automatic machine Max. gear dia 150 mm Module 2 Max Profile depth / Plunge cut depth 7 mm Max hobbing length 135 mm Max length of workpiece, approx. 280 mm Hob slide swivable 250 degrees Hob size dia x length 65 x 60 mm Hob shifting, manually max. 40 mm Hob Spindle speeds 140 – 1120 rpm Workspindle bore 24 mm Bore of collet chuck, max. 3 – 24 mm Feed range, axial/plunge cut 0.06 – 2 mm/rev No. of teeth, min./max. 6 - 200 Spindle Drive/Total electrical load, approx. 2,2 / 4 kW Weight, approx. 1,400 kg Very good condition
Length: 1000 mm Width: 680 mm Height: 1510 mm Machine weight ca.: 0,2 t well-preserved clamping angle with various holes for clamping holes.
Fully refurbished intensive annular tray mixer with 1,500 l. net batch capacity and 1,000 l. hardened concrete output. The mixer is equipped with 2 agitators which are driven by the main drive, and with 1 discharge gate.
Workbench, work table, assembly bench -Width: 1500 mm -Depth: 700 mm -Height: 840 mm -Work top thickness: 40 mm -Lockable drawer: 1 -Weight: 74 kg
Clamping plate with T-slots, tensioning aid, plate field, welding table, welding table, plate boring machine -Width: 200 mm -Length: 1500 mm -Height: 40 mm -Groove width: 14 mm -Weight: 80 kg
Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.
Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 155 mm -Dimensions: 100/120/H182 mm -Weight: 5.5 kg
Brush deburring machine, sheet metal deburring machine, deburring machine -Deburring machine for: stamped, laser and nibbling parts -Deburring system for: sheet metal edges with notches -Drive power: 0.71 kW -Speed: 4500 rpm -Dimensions: 400/180/H130 mm -Weight: 3.5 kg
technical details: - Volume flow (V): 5,000 m3/h - Shaft power (Pw): 15 kW - Shaft speed (nw): 2490 rpm - Pressure ( Pt): 45 mbar - Diameter intake manifold (suction side): 360 mm - Dimensions outlet opening (pressure side): 400 x 255 mm (inside), 48 x 335 mm (outside) Dimensions (WxHxD): 1,600 x 1,200 x 1,400 mm The fan has been electrically and mechanically tested and partly repainted! (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
Hydraulic oil tank -Tank height: 200 mm -Tank capacity: 3.6 L. -Dimensions: 190/350/H290 mm -Weight: 5 kg
Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 150 mm -Piston diameter: 63 mm -Number: 6x available -Price: per piece -Dimensions: 460/75/H105 mm -Weight: 3 kg/piece
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 40 mm -Piston rod: Ø 20 mm -Stroke: 150 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: Ø 50/H445 mm -Weight: 6 kg
Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm
V-belt pulley, pulley -Recess: Ø 150 -Diameter: 310mm -Strap: 1 -V-belt width: 10 mm -Receptacle: Ø 60 mm -Weight: 17kg
Three-phase motor, electric motor -Motor from Zapfenschlager Make: Harbs Type: ZSMV/2 -including: saw blade holder -Power: 4 kW -Speed: 2880 rpm -Construction: B3 -Protection class: IP 54 -Dimensions: 470/216/H165 mm -Weight: 36 kg
Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame made of: galvanized sheet steel -Dimensions: 1575/1275/H175 mm -Weight: 50 kg
used cabinet press Manafacture: HSM Type: 155.1 VL Year of construction: 1998 Machine no.: 6118.114. 01217M Serial no.: 6118.01217 specifications: Pressing force: 18 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)
used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 08 / 2003 Machine No.: 6114.734. R Serial No.: 240141893 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)
used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 10 / 2004 Machine No.: 6114.734. S Serial No.: 250143017 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 1.5 kW -Output: 3x 230 V -Output frequency: 0-120 Hz -Number: 1x converter available -Price: per piece -Dimensions: 205/250/H190 mm -Weight: 6 kg/piece
Change gear, change gears, gear -Number of teeth: 152 pieces -Module: 1.25 mm -for splined shaft: Ø 25 mm
Electric motor, three-phase motor -Voltage: 36V -Speed: 320 rpm -Shaft diameter: 19 x 40 mm -Dimensions: Ø 167/H199 mm -Weight: 16 kg
Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Rope diameter: 5 mm -Rope length: approx. 14000 mm -Cable length: 4500 mm -with: service -Dimensions: 370/330/H450 mm -Weight: 30 kg
Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 153 mm -Passage: Ø 40 mm -Weight: 7 kg
Builder: HAAS Model: 700/1500 HDWV-D Motor: CAT C9 300 HP Work Data: W. 6.850 mm x L. 2.530 mm x H. 2.700 mm Operative Data: W. 8.700 mm x L. 2.530 mm x H. 3.200 mm Year: 2011 Hourly Production: 30 t/h Rotor: 2 Pz (TWIN SHAFT) Rotor Data: L. 1.500 mm x D. 700 mm Rotor Tools: 7/6 TOOTH per ROTOR + 4 TOOLS Weight: 19.000 Kg
Machine vise, sturdy vise, drill vise -Jaw width: 164 mm -Back height: 45 mm -Clamping depth: max. 153 mm -Number: 1x vices available -Price: per piece -Dimensions: 530/200/H117 mm -Weight: 42 kg
new
Mazak Integrex 200 lll S + GL 150 F CNC turning-milling center with second spindle CNC control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 rpm X-axis travel: 580 mm Y-axis travel 160 mm Z-axis travel: 1045 mm B-axis travel: 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool cone Capto C6 Number of tools in the magazine 40 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.
Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Power: 10 kW -Max. speed: 6000 rpm -Shaft: Ø 42 mm -Protection class: IP 23 -Number: 1x motor available -Dimensions: 880/380/H320 mm -Weight: 136 kg
turning diameter: max. 320 mm turning length: 810 mm control: MSX 701 MAPPS III standard turning dia.: 200 mm Main spindle:: Number of revolutions: max. 6.000 min/-1 power capacity - main spindel: 22 / 18,5 kW Bar feed: max. 52 mm spindle bore: 61 mm C-Axis: 0,001 ° Subspindel:: Number of revolutions: max. 6.000 min/-1 power capacity - Sub spindle: 22 / 18,5 kW Bar feed: max. 52 mm spindle bore: 61 mm C-Axis: 0,001 ° Turret 1 + 3:: number of toolpositions: je 16 pos. Number of driven toolspositions: je 16 pos. Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 7,5 / 5,5 kW Y - Axis: 110 (+65 / -45) mm Turret 2:: number of toolpositions: 16 pos. Number of driven toolspositions: 16 pos. Spindle speed - driven tools: max. 6.000 min -1 power capacity - driven tools: 7,5 / 5,5 kW Y - Axis: 110 (+45 / -65) mm axis stroke:: x-travel: 1-3: 210 mm y-travel: 1-3: ...
Kemper Lifting Tipper Type: HK 150 Specifications: suitable for Kemper boilers SP 150 A and AL Load capacity: 1000kg Dumping height: 160cm Dimensions of lifting tipper: Height; 200cm Width: 100cm Depth: 160cm
Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine: TAD 731 GE Engine No.: 5312990071 Power: 153 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL 044 J Gene. No.: 39796800001 Generator power: 150 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.200 Height approx. mm: 2.295 Length ap ...
Croissant moth Teknostamap For wrapping croissants With inlet and outlet conveyor Capacity: 1500 pcs/hr Repaired with new belts and drive roller
Inv. Num. : 6743 Type: MTF 1500 300 Producer: Maplan Created: 1998 Parameters: Clamping force: 300 t
Clamping plate, welding table, welding table, straightening plate -Width: 1510 mm -Length: 1510 mm -Height: 695 mm -Surface: good -Holes: Ø 50 mm -Sheet thickness: 125 mm -bench vice -Transport dimensions: 1540/1770/H1030 mm -Weight: 1650 kg
150 litre still with oil firing Operating pressure: 0.6 bar Attachment number: 331 Subject to prior sale - errors possible Ref. No.: D-1170
Kolbus KM 472A, HD151P ZU840 year 2002 19 clamps 24 stations Trimmer Stacker roller conveyor
3 to 5-Roll calender Buzuluk Number of rolls: 4 pcs. Roll diameter: 150 mm Roll length: 400 mm
Moving bezel, tracking bezel, setting stick, lynette -Max. passage: Ø 150 mm -Edition: Gray cast iron -Hole spacing: 395 mm -Peak height: 240 mm -Drawings accompanying the photos -Dimensions: 480/455/H470 mm -Weight: 25 kg
Code 230605 Description Vertical SLOTTER Make CABE Model 150 ST Serial no. Year 19.. Max. stroke 150 mm Table size Ø 250 mm Table longitude 200 mm Table cross 100 mm Table turning 360 degrees Gap 250 mm Distance tablecenter – column : min / max mm Max. height mm Speeds 32 – 50 – 70 – 95 strokes/min Motor 1.5 kW 380 volts Accessories Head swivels left-right 20° Turning table ( with dividing ) Ø 250 mm Machine size L x W x H 1000 x 600 x2000 mm Weight 750 kgs Remarks Machine is in good condition.
- Clamping angle for workpiece clamping -Dimensions: 275/150/H215 mm -Thickness: 24 mm -T-slots: 17 mm -milled surface -Weight: 14.5 kg
Clamping plate, welding table, welding table, straightening plate -Width: 1510 mm -Length: 3490 mm -Height: 790 mm -Sheet thickness: 25 mm -with supporting ribs -Weight: 2700 kg
Turbopack system Unfortunately without Detais, Engine data: Type : DKF 840/200 L Power : 1 hp / hp/ CV RPM : 205 / min 1420 / min Voltage : 220/380V Voltage : 3.7 / 2.15 A Ingress protection : IP 65
maximum number of results exceeded
please refine your search
