138,453 used machines on RESALE, but how to find them? Machine Search
grinding diameter: 350 mm grinding length: 1500 mm centre height: 175 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0-40 mm/Ø : 0-40 mm/Ø : ±6,5 ° longitudinal feed of the table: 1530 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannung kg cross travel: max. 270 mm : mm grinding depth: mm : 80 mm tailstock quill taper MT: 3 quill travel: 30 mm total power requirement: 6,5 kW weight of the machine ca.: 3,05 t dimensions of the machine ca.: 4 x 2 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service fo ...
Marble plate STIEFELMAYER Length: 3000 mm Width: 1500 mm Thickness: 350 mm Height on feet: 600 mm Number of feet: 6 feet Weight: approx 4 T It was used as a coordinate measuring marble. 2 same marble plates available.
V-belt pulley, pulley -Recess: Ø 150 -Diameter: 310mm -Strap: 1 -V-belt width: 10 mm -Receptacle: Ø 60 mm -Weight: 17kg
Three-phase motor, electric motor -Motor from Zapfenschlager Make: Harbs Type: ZSMV/2 -including: saw blade holder -Power: 4 kW -Speed: 2880 rpm -Construction: B3 -Protection class: IP 54 -Dimensions: 470/216/H165 mm -Weight: 36 kg
Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Outer frame made of: galvanized sheet steel -Dimensions: 1575/1275/H175 mm -Weight: 50 kg
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 1.5 kW -Output: 3x 230 V -Output frequency: 0-120 Hz -Number: 1x converter available -Price: per piece -Dimensions: 205/250/H190 mm -Weight: 6 kg/piece
Change gear, change gears, gear -Number of teeth: 152 pieces -Module: 1.25 mm -for splined shaft: Ø 25 mm
Electric motor, three-phase motor -Voltage: 36V -Speed: 320 rpm -Shaft diameter: 19 x 40 mm -Dimensions: Ø 167/H199 mm -Weight: 16 kg
Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Rope diameter: 5 mm -Rope length: approx. 14000 mm -Cable length: 4500 mm -with: service -Dimensions: 370/330/H450 mm -Weight: 30 kg
Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 153 mm -Passage: Ø 40 mm -Weight: 7 kg
Machine vise, sturdy vise, drill vise -Jaw width: 164 mm -Back height: 45 mm -Clamping depth: max. 153 mm -Number: 1x vices available -Price: per piece -Dimensions: 530/200/H117 mm -Weight: 42 kg
Cutting range round 0°: 150 mm Cutting area square 0°: 150 x 150 mm Cutting area flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting area flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting area flat 60°: 70 x 70 mm Working height: 700 mm Band saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 - 80 m/min Motor output power S1 100%: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Characteristics: • For cutting profiles, tubes, solid materials made of VA, iron and non-ferrous materials • For miter cuts, the saw bracket can be swivelled by up to 60° • Infinitely variable lowering via hydraulic lowering cylinder • Torsion-free, strongly dimensioned saw arm made of grey cast iron • 2 cutting speeds for optimal cutting results • Robust construction, therefore smooth and vibration-fre ...
Horizontal drill rig, with rods on low-loaders and trucks with swivel wall boxes. Tracto Technik GRUNDODRILL 15XP complete train approx. 180m poles DB 2546 L 6x2 MP3, 467.000km Tandem low-loader trailer Complete train from 2009 ! Vehicle may be covered with advertising, labeling and/or labeling residues. Our offer is generally without new HU/AU/SP acceptance. On request, we will be happy to make you an offer from our partner workshops. Errors, typing errors and prior sale excepted. Please do not hesitate to contact us.
Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Power: 10 kW -Max. speed: 6000 rpm -Shaft: Ø 42 mm -Protection class: IP 23 -Number: 1x motor available -Dimensions: 880/380/H320 mm -Weight: 136 kg
The scope of delivery includes: 01x rear wall grille, used Material color: sendzimir galvanized Total width: approx. 2,700 mm Total height: approx. 1,500 mm Mesh size: approx. 103 x 53 mm Mesh size (elevation): approx. 53 x 53 mm Frame profile illustration: L approx. 30 x 30 mm Wire thickness: approx. 1.75 mm Hole diameter: approx. 7 mm Hole grid spacing: approx. 25 mm Weight/ pcs.: approx. 10,40 kg
Clamping plate, welding table, welding table, straightening plate -Width: 1510 mm -Length: 1510 mm -Height: 695 mm -Surface: good -Holes: Ø 50 mm -Sheet thickness: 125 mm -bench vice -Transport dimensions: 1540/1770/H1030 mm -Weight: 1650 kg
ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60
Moving bezel, tracking bezel, setting stick, lynette -Max. passage: Ø 150 mm -Edition: Gray cast iron -Hole spacing: 395 mm -Peak height: 240 mm -Drawings accompanying the photos -Dimensions: 480/455/H470 mm -Weight: 25 kg
- Clamping angle for workpiece clamping -Dimensions: 275/150/H215 mm -Thickness: 24 mm -T-slots: 17 mm -milled surface -Weight: 14.5 kg
Clamping plate, welding table, welding table, straightening plate -Width: 1510 mm -Length: 3490 mm -Height: 790 mm -Sheet thickness: 25 mm -with supporting ribs -Weight: 2700 kg
Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: Ø 150 mm -Height: 20 mm -Hole: Ø 30 mm -Quantity: 1 milling cutter -Dimensions: 150/150/H20 mm -Weight: 2.2 kg
Braking resistor, charging resistor, damping resistor, filter resistor -Watt: 150 W -Ohm: 100 ohms -Number: 3x available -Price: per piece -Dimensions: 240/80/H95 mm -Weight: 0.9 kg
Herbort 159D Homogeniser Serial: 1 Stainless homogeniser, 150l stainless hopper, 3Ph
Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -without: rubber coating -Load capacity: kg -Tire size: 350 x 155 mm -Mounting bore: 60 mm 2x with groove -Number: 4x wheels available -Price: per piece -Weight: 31 kg/piece
Edge grinding machine Work table swivel 45° Grinding height 150 mm Table dimensions 1440 x 710 mm 2 speeds for sanding belt 12/24 m/min 37qqrtber Height adjustment 130 mm from the unit
Dosing system, dosing device, dispenser for dosing system, dosing machine -Type: 1500XL -Dimensions: 265/150/H65 mm -Own weight: 2 kg
Stock no.: 503260 Machine/ Device Type: Dry Air Dryer Manufacturer: Anvil+Longleg Type: Sectional dryer H150 Year of construction: 2011 Sectional dryer H 150 with 8 sectional boilers à 100 l Tank capacity: 8 x 100 L Air flow: 400 m³/h The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the dryer system adapts individually to the operational requirements and can be realized in the smallest space. The dryers work dew point controlled and with an energy-saving heat exchanger. Depending on the production requirements, the air flow rate is regulated between 140 and 400 m³/h by process control. Each dryer boiler has an individual temperature control. A separate scanning of the dry goods prevents overdrying and insufficient Drying due to excessive material removal. ...
Welding fume extraction table Welding table DCE UMA150HG5 dedusting Welding table with integrated suction with filter Manufacturer dust control equipment dust collectors Type UMA 150H G5 Rest according to photos
SUMAB is currently offering a horizontal steam generator. Technical details: Capacity 1500 kg/h, allows you to produce steam in a short period of time. Pre-installed accessories are ready to run. A two part platform for easy assembly on site. Includes: water softening device, condensate tank, cavitation preventing pump, by-pass group with float trap, all fittings and piping connections.
Table length 1480 MM Table width 600 MM Table height adjustment stroke 600 MM Engine 2 hp – 1.5 KW Band length Max Min 3950 MM-3800 MM Bandwidth 100 MM Belt speed 24 m/sec Weight CA 250 KG Space requirement 180 X 100 X h 170 cm CE version
Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor
Code: 0021 Brand: BOHR - AUSTRIA Model: 150/330 Sanding pad for belt sanding machine Universal sanding pad for belt sanders in graphite for solid wood and veneer - mm 330 x 150 Overall dimensions mm 330 x 150 x 100 h Weight kg 4
Standard Equipment's Chrome Coated Cylinder Boiled Steel Body Pressure indicator Pressure Adjustment User guide 2 Years Warranty CE
Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: REO -Type: REOHM BW 155/3000/60 -Resistance values: 0.8-600 ohms -Continuous output: 30,000 p -Number: 1x resistors available -Price: per piece -Weight: 10 kg/piece
faceplate diameter: 1130 mm swing diameter: 1500 mm turning height: 1100 mm faceplate diameter: mm swing diameter: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: STANKO TYPEL 1512 Build in: 1977 with pneumatick 3-jaw stuck 1130 mm max. turning diameter 1500 mm max. turning height 1100 mm Motor 30 KW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool: 60° -Thickness: 25 mm -Total length: 1570 mm -Lengths: 75/75/120/120/590 mm -Total height: 246 mm -Weight: 44 kg
Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Transfer in current condition as seen -1x: punching bracket as shown in the pictures -Manufacturer: CEWE -1x: type LWS 35-150 -Dimensions: 300/80/H220 mm -Weight: 13 kg
Technical data for the compensating plate: Manufacturer: Bito (M) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 150 mm Total depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center - center hole): approx. 120 mm Weight: approx. 0.18 kg | Pcs.
Technical data for the compensating plate: Manufacturer: Bito (M) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 150 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center - center hole): approx. 120 mm Weight: approx. 0.46 kg | Pcs.
Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley -Carrier width: 90-295 mm -Payload: 1500 kg -Number: 1x drives available -Price: per piece -Dimensions: 590/295/H225 mm -Own weight: 21 kg
KOEPFER 151 Gear Hobbing Machine - Horizontal Available 2 machines. Semi-automatic machine Max. gear dia 150 mm Module 2 Max Profile depth / Plunge cut depth 7 mm Max hobbing length 135 mm Max length of workpiece, approx. 280 mm Hob slide swivable 250 degrees Hob size dia x length 65 x 60 mm Hob shifting, manually max. 40 mm Hob Spindle speeds 140 – 1120 rpm Workspindle bore 24 mm Bore of collet chuck, max. 3 – 24 mm Feed range, axial/plunge cut 0.06 – 2 mm/rev No. of teeth, min./max. 6 - 200 Spindle Drive/Total electrical load, approx. 2,2 / 4 kW Weight, approx. 1,400 kg Very good condition
Plastic protectors, collision protection, bollards, polyamide -Full material -Width: 150 mm -Length: 595 mm Height: 74 mm -Drawing with the pictures -Number: 4x savers available -Price: per piece -Weight: 5.6 kg/piece
Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 150 mm adjustable -Admission: -Dimensions: 250/130/H155 mm -Weight: 12.6 kg
Length: 1000 mm Width: 680 mm Height: 1510 mm Machine weight ca.: 0,2 t well-preserved clamping angle with various holes for clamping holes.
Fully refurbished intensive annular tray mixer with 1,500 l. net batch capacity and 1,000 l. hardened concrete output. The mixer is equipped with 2 agitators which are driven by the main drive, and with 1 discharge gate.
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 150 mm -Width: 25 mm -Number: 2x discs available -Price: per piece -Minimum purchase: complete -Weight: 1 kg
Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 143 mm -Width: 25 mm -Number: 1x discs available -Price: per piece -Weight: 0.9 kg
Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.
Spreading spindle, textile goods feeding device -Original husband spare part -for husband Rolex machines and others -Diameter: 50 mm -Length: 1540 mm -3 common -Weight: 8 kg
maximum number of results exceeded
please refine your search
