sr 15 6 used for sale

Width: 650 mm, Length: 1650 mm, Infeed height: 1070 mm, Slith: 2 mm, Power: 3 x 400V, 50Hz, 16A, Dimensions: 1800 x 1250 x 1200 mm, Weight: 1000 kg

Belt width: 650 mm, Flip-over: 90 - 200 mm, Power: 3 x 400V, 50Hz, 0.5kW, Dimensions: 2100 x 1300 x 1450 mm

Belt width: 600 mm, Power: 3 x 400V, 50Hz, 5.3kW, Dimensions: 2750 x 1650 x 2300 mm, Weight: 1025 kg, Including: GEA OptiAir cycloneTypeOPASerial number515Year of construction2011Power3 x 400V, 50Hz, 4kWDimensions1350 x 950 x 1800 mmWeight450 kg

Belt width: 645 mm, Description: With continuous belt washer and pneumatic belt control, Frying length: 6000 mm, Heating: electric, 270 kW, Compressed air: 6 - 10 Bar, Power: 3 x 400V, 50Hz, 272kW, Dimensions: 8000 x 1400 x 2500 mm

Belt with: 600 mm, Description: Teflon infeed, separate infeed conveyor, hold down belt, circulation pump, oil level control, sediment removal, electrical hoists, prepared for CO2 fire extinguisher, Frying length: 6000 mm, Heating: thermal oil, 388 kW, Frying time: 25 - 250 sec, Compressed air: 4 - 6 Bar, Power: 3 x 415V, 50Hz, 8kW, Dimensions: 8700 x 2300 x 3900 mm, Weight: 4250 kg

Belt width: 600 mm, Grillength: 13000 mm, Retaining time: 2.5 - 50 min., Heating: thermal oil, 300kW, Steam: 4 - 8 Bar, Power: 3 x 400V, 50Hz, 18kW, Dimensions: 15000 x 2200 x 3100 mm, Weight: 10000 kg

Belt width: 600 mm, Description: Teflon infeed, hold down belt, sediment removal, circulation pump, oil level control, prepared for CO2 fire extinguisher, Frying length: 6000 mm, Heating: thermal oil, 388 kW, Oil volume: +/- 1250 litre, Frying time: 25 - 250 sec, Power: 3 x 415V, 50Hz, 8kW, Dimensions: 8950 x 2050 x 3900 mm, Weight: 4250 kg

Belt width: 600 mm, Cooking length: 9000 mm, Heating: thermal oil, 240 kW, Steam: 4-8 Bar, 900 kg/hr at 95°C, Water: 3-5 Bar, 0.5m³/hr, Compressed air: 6-8 Bar, 120nL/min, Power: 3 x 380V, 50Hz, 9.2kW, Dimensions: 10200 x 2000 x 2750 mm, Weight: 6250 kg

Belt width: 600 mm, Description: With extra infeed conveyor of 1800 mm Including CIP tank and Bartec hygrophil Switchcabinet separate, not connected to the machine With optional outfeed conveyor of 1500 mm, Cooking length: 7000 mm, Heating: thermal oil, 180kW, Steam: 4 - 8 Bar, Cooking time: 2 - 40 min, Compressed air: 6 - 10 Bar, Power: 3 x 415V, 50Hz, 13kW, Dimensions: 9800 x 2000 x 3150 mm, Weight: 5850 kg

Belt width: 600 mm, Description: Hold down belt, sediment removal, circulation pump, manual hoists, Frying length: 3000 mm, Heating: electric, 80kW, Power: 3 x 400V, 50Hz, 90kW, Dimensions: 5400 x 1750 x 2800 mm

Belt width: 650 mm, Description: Teflon infeed, hold down belt, sediment removal, circulation pump, oil level control, electric hoists, prepared for CO2 fire extinguisher, Frying length: 3000 mm, Heating: electric, 90kW, Frying time: 25 - 250 sec, Power: 3 x 400V, 50Hz, 99kW, Dimensions: 6100 x 2350 x 3000 mm, Weight: 2750 kg

Belt width: 600 mm, Direction: 90 degrees right hand side, Radius: 1150 mm, Power: 3 x 380V, 50Hz, 0.18kW

Belt width: 655 mm, Transport length: 1500 mm, Power: 3 x 400V, 50Hz, 0.37kW, Dimensions: 1500 x 1250 x 1450 mm

Belt width: 600 mm, Transport length: 1000 mm, Belt speed: 2.5 - 25 m/min, Power: 3 x 400V, 50Hz, 0.37kW, Dimensions: 1000 x 1000 x 1450 mm, Weight: 120 kg

Belt width: 650 mm, Product height: max 50 mm, Filling: min 40 L, Infeed conveyor length: 600 mm, Outfeed conveyor length: 950 mm, Power: 3 x 400V, 50Hz, 1.8kW, Dimensions: 3850 x 1400 x 1350 mm, Weight: 850 kg

Belt width: 600 mm, Description: Hold down belt, sediment removal, circulation pump, oil level control Prepared for CO2 fire extinguisher, Frying length: 3000 mm, Heating: thermal oil, 90kW, Power: 3 x 380V, 50Hz, 3.6kW, Dimensions: 5650 x 1800 x 3450 mm, Weight: 2150 kg

Belt width: 600 mm, Transport length: 1500 mm, Power: 3 x 400V, 50Hz, 0.09kW, Dimensions: 1600 x 850 x 1000 mm, Weight: 135 kg

Belt width: 600 mm, Power: 3 x 400V, 50Hz, 3kW, Dimensions: 1800 x 1350 x 1450 mm, Weight: 456 kg

Belt width: 600, Description: Hold down belt, sediment removal, circulation pump, electric hoists, oil level control Prepared for CO2 fire extinguisher, Frying length: 4500 mm, Heating: thermal oil, 214kW, Power: 3 x 380V, 50Hz, 10kW, Dimensions: 7400 x 1900 x 3150 mm, Weight: 2750 kg

Belt width: 600 mm, Description: Variable speed, Transport length: 2000 mm, Power: 3 x 400V, 50Hz, 0.25kW, Dimensions: 2200 x 850 x 1200 mm

TRIA GRANULATOR 100-65DN, Open rotor length 1.000 mm., Ø 650 mm., n.3 rotating knives, n.2 still knives, 75 kw.drive, Electric cabinet, Constructed in 1996, INSTALLED POWER: 75 kw, rotor size: 1000x650 open

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 5554; Engine: Perkins 2806A-E18TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132

Metal detection coil Metron including conveyor trough and protective tube "Durit tube" Coil diameter 600 mm Conveyor length approx. 7.0 m

Separate control cabinet system, fleece filter system

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31620 € : 603.94 € : 0.4 - 2 mm : 600 mm : 1200 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : Bulgarien : 53750 € : 1015.88 € : 630 mm : 2000 mm : 315 mm : 103 mm : 430 mm : 400 mm : 11 : 120 MK : 21 : 12,5 - 1250 1/min : 120 : 0.04 - 12 mm/U : 0.02 - 6 mm/U : 0.5 - 120 mm : 60 - 1/4 Gänge/ : 0.125 - 30 : 240 - 1 : 315 mm : 90 mm : 90 mm : 5 MK : 230 mm : 11 kW : 3310 kg driven by manual transmission 3-axes digital readout quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm spindle dead center longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", FURTHER TURNING LENGTHS: turning length1.000 mm € 50 880,00 turning length1.500 mm € 51 960,00 turning length3.000 mm € 58 400,00 tur ...

x-travel: 1100 mm y-travel: 650 mm z-travel: 550 mm Control: Fanuc 31i-MB distance spindle nose and table: 150 - 700 mm Main spindle:: turning speed range - main spindle: 10 - 20000 min/-1 power capacity - main spindel: 22 / 11 kW max. Torque: Nm tool taper: BT 40 work table:: table surface area: 1200 x 650 mm max. table load: 800 kg Tool-Presetter:: number of toolpositions: 30 pos. tool taper: BT 40 feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1500 mm/min total power requirement: 48,55 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 3,65 x 3,30 m CNC Machining Center Vertical - CNC control Fanuc 31i-MB - ATC 30-fold (BT 40) - Chip Conveyor - Tool Measure - Mold Optio n - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of controlled axis: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cab type LK 600 (installed on Iseki TX ) Parts sale: frame, hood, doors, windows. More cabin parts available from Mauser for various models. Info and prices on request ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping and disposal, environmental care, engines and more...

Key data: 250 KW, 300 kVA, 400 V

MTU Diesel Emergency Power Generator - Like New, Only Test Hours. Manufacturer: MTU / Rolls Royce / Marelli Generators Type: 6R1600 G40F Power: 250kW Diesel 50Hz 400V Hours: 115 hrs Includes control panel, exhaust system, and logbook history

number of controlled axis: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 250 KW

MTU Diesel Emergency Power Generator - Like New, Only Test Hours. Manufacturer: MTU / Rolls Royce / Marelli Generators Type: 6R1600 G40F Power: 250kW Diesel 50Hz 400V Hours: 115 hrs Includes control panel, exhaust system, and logbook history

This 3-axis DECKEL MAHO DMU 60T was manufactured in 1996. It features a 24-position tool changer, an NC rotary table, and a spindle speed up to 6300 rpm. The working areas are 600 mm in length, 525 mm in width, and 500 mm in height. It includes a coolant system with a 150-liter capacity. Consider the opportunity to buy this DECKEL MAHO DMU 60T vertical machining centre. Contact us for more information about this machine.

Height=1.34 m, Overall length= 0.83 m, Overall width= 1.1 m, Net weight= 240 kg,

ABB Robotics IRB 6400RF 2.5/200 S4C+ M2000 Robot Control: S4C+ M2000Number of axes: 6 Max. load capacity: 200 kg max. working range: approx. 2500 mm Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

ABB Robotics IRB 6600 175/2.8 S4C+M2000 Robot Control: S4C+M2000 Number of axes: 6 Max. load capacity: 175 kg max. working range: 2800 mm Year of Make: 2004 Scope of delivery: robot, controller, cable, teach panel, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Two weeks commissioning warranty. No further warranty.

Built in 1981 Stacking lift Tub system photoelectron. Stack Scanning mobile Delivery date: immediately from stock

able dimensions ( x-y/mm) 6500 x 1800 Stroke ( X/mm) 6210 Stroke ( Y/mm) 3440 Stroke ( Z/mm) 1103 Type of controll heidenhain Number of spindle per minute 35 - 6000 Tool magazine yes Number of inserts in the tool magazine 60

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 231900 € : 400 to : 6050 mm : Y1 / Y2 / X und R Achse : 365 mm : 5100 mm : 510 mm : 630 mm : hydraulisch : 150 mm/s : 9 mm/s : 150 mm/s : 750 mm : 160 l : 2x11 kW : 7500 mm : 2110 mm : 3810 mm : 34600 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES ...

max. wheel diameter: 36 mm gear width: 36 mm max. module: 10 min. module: total power requirement: 12 kW weight of the machine ca.: 11,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 t, 800 mm, 650 mm

LCM Taiwan, 600 tons hydraulic press New in 12/2014 Table 800x800 mm Stroke 0-650 mm adjustable full specifications attached Possible to inspect under power

Single Head Corner Welding Machine

Used sheeter RONDO, type: Compas 3000 SFA 612 -In bakery condition- - Automatic reel (winding and unwinding) - with flour shaker - Strip width: 640 mm - Roller opening: 0.2 - 45 mm - Coasting speed: 50 - 96 cm / sec. - Condition: Very good, everything checked, ready for immediate use The machine is in good condition. Visits and test runs are possible by arrangement.

Hot-melt Case Sealer – Overview This used hot-melt case sealer by TE-CO is engineered for end-of-line industrial packaging within a used bottling line. The model 607-98 provides reliable, consistent closure of corrugated cartons using a hot-melt adhesive system, making it a proven solution for beverage production environments where wine bottles in cases must be sealed securely prior to palletizing. With robust construction and straightforward operation, it integrates seamlessly with upstream case packers and downstream palletizers to support continuous operation and optimized throughput. Manufactured by TE-CO, this second hand unit focuses on dependable carton closure, ensuring clean glue application, tight seals, and minimal maintenance demands. It is especially suitable for cases containing glass bottles in common formats used by wineries and beverage producers. Designed to work  ...

Technical Specifications & Performance Data The Kosme Kosmac 6r1s3s ADH is a rotary self-adhesive labeler with additional glue application for seal/tax band, designed for dependable operation in beverage production environments. Ideal for integration into a used bottling line, it offers consistent labeling quality for glass bottles in still and sparkling applications. Manufacturer / Model: Kosme – Kosmac 6r1s3s ADH Year of manufacture: 2000 Production speed: up to 3,000 bottles per hour (format-dependent) Container types: Glass (configured) Bottle formats: 0.375 L and 0.75 L Labeling configuration: 3 self-adhesive groups (front/back/neck) + glue station for state/tax seal Number of stations: 4 total Number of plates: 6-plate rotary carousel Rotation direction: Clockwise Electrical supply: 380 V, 50 Hz, 3.5 kW, 3-phase Approximate weight: 2,000 kg Advanced Automation & Control System ...

Used Capping Machine Bertolaso Sigma 603 up to 4500 bph Firstly, the used Bertolaso Sigma 603 capping machine is a technologically advanced solution. It ensures high performance up to 4500 bottles per hour. Designed for maximum efficiency in the capping process, it integrates seamlessly into production lines. Indeed, its versatility and reliability are unparalleled. Technical Features of the Capping Machine Bertolaso Sigma 603 Specifically, the Capping Machine Bertolaso Sigma 603 model features three heads for aluminum screws. These are configured for caps measuring 31.5 mm by 44 mm. Furthermore, a centrifugal cap distributor ensures constant and precise cap feeding. Consequently, it optimizes the capping process, eliminating interruptions. Moreover, mobile capping heads and a manually adjustable height capping head offer great flexibility. They easily adapt to different bottle and cap t ...

Used Capping machine Bertolaso SIGMA 603 4500 bph General Features of the Used Capping machine Bertolaso SIGMA 603 4500 bph The Used Capping machine Bertolaso SIGMA 603 4500 bph provides a technically specific solution for aluminum screw cap application on cylindrical containers. Primarily, manufacturers use it on medium-speed bottling lines. Notably, this machine includes three capping heads for aluminum caps with a diameter of 30 mm and a height of 60 mm, which match wine and spirits industry standards. As a result, it fits various production demands with precision. Cap Distribution and Closing System The cap feeding system uses a centrifugal cap distributor, which ensures proper orientation and continuous flow to the capping heads. Moreover, the mobile capping heads automatically adapt to the container position during closure. In addition, operators can manually adjust the closing hea ...

Used Capping Machine BERTOLASO for Aluminium Screw Caps up to 9000 BPH The Bertolaso SIGMA 606 capping machine delivers reliable and high-performing results for aluminium cap applications. Specifically, this machine meets the needs of industrial bottling by ensuring efficiency and precision in the capping process. Moreover, its technical configuration makes it ideal for high-capacity production lines, reaching up to 9,000 bottles per hour. Main Technical Features of the Bertolaso SIGMA 606 The machine operates with six capping heads, which handle aluminium caps sized 28 x h 15 mm. As a result, this setup ensures that the machine applies uniform and secure closures, minimizing defects during production. The centrifugal cap feeder guarantees a continuous and steady flow of caps to the capping heads. Consequently, this system maintains consistent production speed, even under maximum load co ...

Oxy-fuel cnc cutting machine. Prestine condition.