used Squaring saws for sale

Used ALTERDORF sliding table saw mod. F45 Serial number 07-08-10-142 Electronically controlled two-axis adjustment for tilt and cutting height with automatic gradage-dependent blade height correction Digital Rip Fence Viewer Maximum carriage stroke mm 5000 Maximum cut at the square fence mm 4420 Maximum tilt from 0 to 45 degrees Machine without engraver Maximum cut at rip fence mm 1350 Maximum blade diameter mm 550f Engine power 15 hp N. 3 blade rotation speeds: 3000/4000/5000 rpm Maximum cutting height 200 mm at 90 degrees Maximum cutting height 139 mm at 45 degrees Year 2007 EC

CASOLIN sliding table saw model ASTRA 3000: – 3000mm steel trolley – width on parallel guide 1100mm – manual lifting and tilting of the blade unit – main blade D=400mm, 5.5 hp motor – 3 blade rotation speeds, 3000-4500-6000rpm – independent engraver, 0.75 hp engine – engraver rotation speed 8000rpm Machine not according to CE standards, for export AVAILABILITY FROM MAY 2024

CASOLIN tenosquaring machine model TSX3: – 3000mm steel trolley – protection suspended on the blade – tilting blade D=400mm max, 5.5 hp motor, with 3 speeds 3000-4500-6000rpm – engraver D=110mm, motor hp 0,75, 8000rpm – cutting width on rip fence 950mm – spindle moulder with shaft D=35 x L=170mm, engine hp 5.5 , with 4 speeds 3000-4500-6000-8000 rpm – weight approx. 1500 kg Machine not according to CE standards, for export

4 sides trimming line

I sell a center saw with continuous HOMAG FPL620/06/15/P S/LQ. Year of construction 2007. Working width 204 - 1304mm Element height 12 - 60mm Cutting width 100mm Blank length 300mm Feed speed 10 - 40 m/min. Configuration: 1 + 1 pcs. cutting units top + bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. cutting unit flexible top/bottom 1 pcs. grooving unit with stop and softforming function Material pressure tape with conveying from above. Continuous machine. Condition Very good. Available same.

Cutting saw for cutting waste material. Suitable for processing waste after an angle circular saw. The configuration of the machine and its parameters is by mutual agreement. Technical parameters: Power of the main motors: 2 x 11 kW Power of the feed motor: 0.75 kW Minimum height of the starting material: 15 mm Maximum material length: optional Maximum height of the starting material: optional

Brettbesäumer Autojet used Cutting heights 18 - 100 mm, 3 variable axes – 2 variable stems – Re./Li. Additional bushing. Build 3/94 - New laser measurement with PC/software/PC cabinet from Installation 5/2007 A cost-effective solution for a fast trimming machine with modern laser measurement. - Continuous capping with length stops for the cap lengths - Zero cross-cut saw - Addition of swivel saw for tip capping on the opposite side. The waste is disposed of. -Transverse measuring conveyor The boards are conveyed by a measurement curtain in transverse passage. -Laser measurement State-of-the-art surveying with 15 lasers from above. Of course, programs can be stored in all variety, depending on length and width, separation, sharp-edged or forest edge can be mapped in many ways in the program. - Alignment table A computer calculates the ideal orientation of the bo ...

PAUL recutting saw type s-900-L with a passage width 906 mm, Cutting width 180 mm. The feed is infinitely adjustable 0- 90 m-min. The saw motor has 110 kW. Saw blade diameter 550 mm at 2500 rpm. With automatic feeding, Spreiselabscheider double-lamellig with pull-out tapes

SCM sliding table saw model SI15WF: – 2500mm steel carriage (2700mm stroke) – tilting blade D=400mm max, 5.5 hp motor, with 3 speeds 3200-4500-6000rpm – without engraver Machine not according to CE standards, for export

SCM sliding table saw model SI400e: – 3200mm aluminium trolley – motorized lifting of the blade unit, with digital indicator – motorized tilting of the blade unit, with digital indicator – Rip fence with manual adjustment – main blade D=400mm – 3 blade rotation speeds, 3000-4000-5000rpm – independent engraver with external adjustment – engraver rotation speed 8500rpm Machine according to CE standards

Edging saw – single-blade saw Make Torwegge Type H321 Cutting width 164 mm Chain width 160 mm Main motor approx. 11 kW Cutting height 90 mm Weight approx. 1400 kg

SPECIFICATIONS: Max. cutting length: 3000 mm Max. cutting height: 50-60 mm Manual Saw Blade Feed Adjustable cutting width Electric/pneumatic operation

Trimming saw Wurster & Dietz Type: FR 7 Passage width 800 mm Cutting height 160 mm with saw blade diameter 500 mm Cutting height 140 mm with saw blade diameter 450 mm Cutting height 120 mm with saw blade diameter 300 mm Motor 22 kW Adjustable slatted bushing Hydraulic feed 0 – 70 m/min. Hydraulic roller lifting Input roller conveyor 6 meters long with 6 rollers, with rods for adjustment of cutting height and speed and batten bushing Output roller conveyor 6.5 m long with push-off in the form of spiral rolls for side goods new spare drive belt complete with operating instructions and wiring diagram Condition: Technically perfect, cleaned and repainted Total weight approx. 5 to. (Trimming saw 3 tons. and roller conveyors and rest 2 tons.) Installation length approx. 15.5 m Loading dimensions: approx. 6.5 loading meters