spring used for sale

100hl Complete Brewery Location: UK SCADA Controlled 100HL SPR UK brewery capable of 3 brew cycles per day Mash Conversion Vessel Lauter Tun Copper Kettle Whirlpool Porteus Mill System Scada Control System 100hl FV x 4 200hl FV x 3 200hl MV x 6 200hl Bright Beer Tanks x 2 50hl Rough Beer Tanks x 2 50hl Bright Beer Tank FV 50hl Schenk Filtration System Yeast tanks x 5 CIP System x 2 Heat Exchanger x 5 Stainless Steel mixing tanks Stainless Steel buffer tanks Spirax Condensate recovery x 2 Babcock Wanson Steam Generator Abac Air Compressor Water Treatment Plant Various Stainless Steel Pumps Laboratory Equipment CO2 Tank Glycol Chiller

SPRINGER sawn timber parceling line and sorting line The offered SPRINGER packer and sorting line is a robust and high-performance system for the continuous transport and processing of round wood. The line is in very good used condition, is immediately available and can be dismantled and loaded at short notice. Technical data Manufacturer: SPRINGER Plant type: Log conveyor line Total length: approx. 33,000 mm Package dimensions: 1,200 × 1,200 mm Wooden length: 2.90 m - 5.50 m Conveying speed: 80 pcs/min, approx. 8 cycles/minute Power: approx. 80 cycles Conveying direction: from left to right Steel construction: including maintenance platforms, railings and foundations Construction: material feed, tilting table, separation, cross-cut saw, reject box, transfer trays, stacking, removal Special features: Very nice used condition Immediately available R ...

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

USED STAINLESS STEEL SPROUT-WALDRON 10 DRYER REF.: C6846 General characteristics: Manufactured by SPROUT-WALDRON Model 10 Material Stainless steel Weight 510 kg Motor characteristics: Rotational speed 910 rpm

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - serial: Sprematec - length: approx. 10 m - width: 1350 mm inside / 1518 mm outdoor - heated thermal oil - year: 10/2003

For sale is a complete, well-maintained used sawmill plant with EWD sawing line, consisting of modern components for log processing, sorting and disposal. The facility has been regularly serviced and is in excellent condition. Part of the line is still in operation and can be visited by appointment. Available from approx. June 2026. System components at a glance: Log yard: Sorting, surveying and debarking plant, SPRINGER, built in 2017 Nicholson debarking machine, built in 1992 Microtec surveying system, built in 2015 30 sorting boxes Cross-cut plant, built in 2017 Sawing line – EWD: Twin-shaft circular saw DWK 700, built in 1999 Profile chipper PF 19-3SP/V, year of manufacture 2003 Resawing circular saw BNK 225/6, built in 2003 Complete mechanization and control Edger EWD Optimes BK-100B Sawn timber sorting and ancillary facilities: 7 sort ...

Paint module Gun Driver Module -Type: Spraymation 305910-2 -50 VDC Price: per piece Quantity: 2 available -Weight: 0.8 kg

Springer Destacking and Packing System Complete with electrical control cabinet and control panels

Schafberger+Sprödhuber Type BS electro-pneumatic pot-hinge drilling machine or fitting drilling machine for drilling pot hinges or fittings with mechanical centring. Technical data: Technical specifications: On request Condition: Gebraucht Location: Tauberbischofsheim, Germany

Working width: 3600 mm Working height: 2600 mm Number of cylinders: 5 St. loading dimensions L x W x H: 4400 x 1150 x 2970 mm weight: 3000 kg Schafberger + Sproedhuber Bavaria Frame Press --------------------------------- Machine will be partially reconditonned by us before delivery. With automatic pressing cycle + manual control for tenon + slot corner joints. CE-certified version Basic machine in the strongest welded frame construction, with thick-walled special hollow profiles. Guideways for the pressure beams for the press corners in a low-wear machined design. Fast, smooth, manual width adjustment via ball-bearing carriages, fixed in a hole pattern. Height adjustment and pressing via long-stroke cylinders in a single work cycle. Right-side press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders necessary, thus avoidi ...

Presentation machine Band width: 600 mm

slicer for curry sausage bandwidth: 300 mm, cuts for 12 mm construed.

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - continuous grilling line - Total length outside: 6 m - Total width: approx. 1.300 mm - Height of the gallows: 1.200 mm - Gallows for chain hoist - 5 floors above each other - Conveyor belt of wire belt: 600 / 2,35 / 7 / 12,7 - Double-walled floor and hood, isolated

) for double pot MAKO-DT/130 ) with two drills ) incl. automatic Mittelbohreinstellung ) Cycle time per frame is less than 15 seconds ) Clamping and centering device with pneumatic cylinders, which are vertically and horizontally ) this machine streamlines the beating of wood window

MANUFACTURER: Niro Atomizer CAPACITY: 1.183 Kg/h, , APPLICATION: Milk powder and whey powder production. MACHINE COMES WITH: External vibro fluid bed dryer, Niro F35 atomizer, powder cyclones, bag filters, air pre heating economizer unit, air heating unit with steam heat exchangers, vibro sieve powder calibration unit, air ventilators, air locks, rotary valves and many accesories...

Suction fan Slow runners D= 350mm Air capacity 6250m³/h

1.Pipe belt conveyor RGFO 1200/900 x 37000 version with foldable upper half, clamping station manual, drive approx. 11 kW, with scraper, 2 level monitors, Hopper and transfer hopper built in 2011 2. Vibrating screen 3 levels / 3 sqm, motor 3 kW 3. Screw conveyor 3 x 500 mm, motors 3 x 7.5 kW

Conveyor width: 600 mm Cut by knife cylinder Cutting width 7,0 mm Supply and unloading conveyor Machine dimensions in cm: Width: 120,0 Length: 170,0 Height: 130,0 Voltage: 400 V, 50 Hz

Combitrailer / mowing container for mowing / mulching while simultaneously picking up grass, leaves, undergrowth, horse droppings, etc. Heavy, robust design: combination of tipper chassis and flail mower in front with height-adjustable trailing roller, working tools blade flail, working width 1.80 m, container volume 11 m³, hydr. High emptying as well as floor emptying possible by means of rear wall swing flap. Hydraulically height-adjustable traction device, with overrun brake. PTO drive 540 rpm, power requirement min. 44.4 kw/60 hp. Other combi trailers with working widths of 130 and 150 cm, also machines from other manufacturers available - ask us! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, envir ...

- Condition: Presentation Machine - Usable volume: 210 L - incl. Control - incl. Pump to empty out

- Condition: Presentation Machine - Usable volume: 210 L - on Weighing Cells

- Condition: Presentation Machine - Usable volume: 80 L

- Condition: Presentation Machine - Usable volume: 120 L - incl. Control - incl. Pump to empty out

- Condition: Presentation Machine - Usable Volume: 160 L - incl. Control - incl. Pump to empty out

Packing system loaded onto trucks Timber length 3-5m (5.5m) Composed of: Tilting table Alignment roller conveyor Board Splitter Layer conveyors Handovers (5 pieces) Lift table Transport... (Without control cabinet)

Used meat flattener Demonstration system - Conveyor width: 600 mm - Quick belt change for hygienic cleaning ---------------------------------------------------- Used Meat flattener Presentation machine - Conveyor width: 600 mm - Quick belt change for hygienic cleaning

Conveyor belt / conveyor belt 3 pcs. - Length approx. 9,000 mm - Width: 300 mm ------------------------------------ Conveyor Belt / transportation belt 3 pcs. - Length: approx. 9,000 mm - Width: 600 mm

Conveyor Belt / Conveyor Belt - With blue Clean Drive belt - Length: approx. 5,250 mm - Belt width: approx. 305 mm - With geared motor --------------------------------- Conveyor belt / transportation belt - With blue clean drive belt - Length: approx. 5,250 mm - Belt width: approx. 3005 mm - With gear motor

Frame press, gluing press -operated: hydraulically -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg

Conveyor Belt / Conveyor Belt - With blue Clean Drive 2" strap with carriers - Length: approx. 8160 mm to 8360 mm - Belt width: approx. 305 mm - With geared motor ------------------------------------------------------ Conveyor belt / transportation belt - With blue clean drive belt with 2" high catch - Lngth: approx. 8,160 - 8,360 mm - Belt Width: approx. 305 mm - With gear motor

Conveyor belt/wire webbing/rod webbing - Length: approx. 3,700 mm - Width: 600 mm --------------------------------------------------------- Conveyor belt / wire belt / mesh belt - Length: approx. 3,700 mm - Width: 600 mm

Conveyor belt/wire webbing/rod webbing - Length: 3,250 mm - Width: 600 mm - Pitch: 12.7 mm - With geared motor --------------------------------------------------------- Conveyor belt / wire belt / mesh belt - Length: 3,250 mm - Width: 600 mm - Partition: 12.7 mm - With gear motor

Conveyor belt/wire webbing/rod mesh webbing belt with center drive - Length: approx. 2,500 mm - Working width: 300 mm - with mid-drive ------------------------------- Conveyor belt / wire belt / mesh belt with center drive - Length: approx. 2,500 mm - Working Width: 300 mm - With center drive

Conveyor belt / conveyor belt / high conveyor / downward conveyor - Length: approx. 3,050 mm - Belt width: approx. 400 mm - With geared motor - Plastic link belt with curved carriers 100 mm high ---------------------------------------------------------------------- Conveyor belt / transportation belt / high conveyor / down conveyor - Length: approx. 3-050 mm - Belt width: approx. 400 mm - With gear motor - Platic link conveyor belt with bended catch 100 high

L-Conveyor Belt/Conveyor Belt/Crate Belt/L-Belt - Conveyor width: approx. 300 mm - Horizontal range: approx. 1,400 mm - Sloping area: approx. 4,400 mm - Plastic link belt with adapter ----------------------------------------------------------- L-Conveyor belt / transportation belt - Working widht: approx. 300 mm - Horizontal area: approx. 1,400 mm - Dropping area: approx. 4,400 mm - Plastic link conveyor belt with catch

L-Conveyor Belt/Conveyor Belt/Crate Belt/L-Belt - Conveyor width: approx. 305 mm - Horizontal range: approx. 1,500 mm / 45° - Ascending range: approx. 4,430 mm - Variable speed gearbox - Plastic link belt with 2" high carriers every 300 mm --------------------------------------------------------------- L-Conveyor belt / transportation belt - Working width: approx. 305 mm - Horizontal area: approx. 1,500 mm / 45° Kinking - Rising area: approx. 4,430 mm - Adjustment gear - Plastic link conveyor with 2" high catch all 300 mm

Conveyor Belt / Conveyor Belt - Length approx. 6,500 mm - Belt width: approx. 465 mm -open design - Without side guide - Drum drive - Plastic link belt -------------------------------- Conveyor Belt / transportatio belt - Length: approx. 6,500 mm - Belt width approx. 465 mm - Open execution - Without directional control - Drum drive - Plastic link conveyor belt

Conveyor Belt / Conveyor Belt - Length: approx. 9,220 - 9,320 mm - Belt width: approx. 305 mm - Gear motor - Plastic link belt ----------------------------------- Conveyor belt / transportation belt - Length: approx. 9,220 - 9,320 mm - Belt width: approx. 305 mm -Gear motor - Plastic link conveyor belt

Conveyor Belt / Conveyor Belt - Length: approx. 3,000 - 3,100 mm - Belt width: approx. 305 mm - Gear motor - Plastic link belt ------------------------------ Conveyor belt / transportation belt - Length: approx. 3,000 - 3,100 mm - Belt width: approx. 305 mm - Gear motor - Plastic link conveyor belt

Spray System spray.xact food 1000 mm Spray Grease System Precise, cost-effective, and highly reliable: Meet spray.xact, the next generation of contact-free spray lubrication. Designed for ultimate flexibility, this system applies oils and other media with pinpoint accuracy using a high-frequency valve and a single-substance nozzle. Unlike traditional compressed-air systems, spray.xact eliminates unwanted oil mist entirely—meaning you can skip the expensive extraction systems. The result? A low-wear, low-maintenance, and highly economical solution perfect for stamping, forming, fine blanking, and rolling mills. Technotrans offers tailored configurations to fit your exact needs: - spray.xact b: A flexible, modular design built for easy retrofitting in tight spaces. - spray.xact c: A compact, highly service-friendly unit enclosed in a robust stainless-steel housing. Both configuratio ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

Danmatic Spray unit spray glazing machine 2017, stainless, spray glazing machine, belt dimensions 2150mm x 820mm, stainless mesh belt, four top mounted spray jets, adjustable pressure controls, can work with a great variety of liquids from pure water to oil and glaze egg, mobile, 3Ph

Compressed air sprayer, Sprayomat, pressure sprayer, small quantity lubrication, minimum quantity lubrication, plant protection sprayer -Manufacturer: Lüfa-Werke, compressed air sprayer Sprayomat -Type: SM 21 -Engine: AEG 0.25 kW -Container: with level indicator -Dimensions: 590/320/H910 mm -Weight: 56 kg

ID3411 Crane Repair Spreader for 20ft Container year/Baujahr 2016 - brand new, unused 1.5 t Spreader to move sea container 20Ft, SWL: 40.000 Kg, is completely new never used Move spreader to sea container 20Ft, SWL: 40,000 Kg, is completely new never used

Collator with finisher, Theisen & Bonitz, Sprint B315VP, Year: 1999, Minimum size 65 x 100 mm, Maximum size 350 x 500 mm, 15 stations, Pileheight 30 cm, Paperweights: 20-800 grams, Finisher TB Sprint 303 QSM-Stitch+Fold+Trim mit 2 Hohner Universal 48/5S stitchingheads, Jogger zig/zag jogger, speed booklet making, up to 3.100 cycles per hour, speed collating: up to 3.500 cycles per hour, dimensions of the collator: 140 x 730 cm, dimensions of the finisher: 150 x 240 cm, this is a fully functional machine, alle 15 stations are working and complete, Maximum size: 350 x 500 mm, Stations: 15 automatic stations, Pile height: 30 cm, Finisher: TB Sprint 303 QSM stitch+fold+trim with 2 Hohner stitching heads, Jogger: yes, zig-zag jogger, Speed: 3.500

Manufacturer: Venyeskob Spritzmaschine Stone, Type: Venspray, Year: 2011, Control: Venyeskob, Work piece width min-max mm: 10-1000, Working widht max mm: 1000, Working hight mm: 120, Spraying heads - total: 2, V-Band Lackrückgewinnung: no, Walzenwäschersytem: no, Transport system steel belt: Kette, Lackierpistolen: 2, Spraying heads - total: 2, Year :2011

Manufacturer: Walther + Cefla UV, Type: Pilot Signier + UV 2000, Spraying line: yes, Work piece width min-max mm: 1300, Spraying machine: Walther, UV dryers - 4 lamps (number): 1,

Manufacturer: Venjakob Model: VEN SPRAY ONE Type: Automatic flat-line spray coating machine with dry filter extraction Control: 15-inch touch screen PC with recipe management system Compliance: CE-certified, user interface and documentation available in local language Technical Specifications - Overall dimensions (L x W x H): 4,084 x 4,000 x 2,600 mm - Working width: 1,300 mm - Feed speed: 1 to 4 m/min - Gun traverse speed: 0.4 to 2.0 m/sec, infinitely variable (max. 25 double strokes) - Electrical connected load: 11 kW - Maximum supply air: 7,000 m3/h - Maximum exhaust air: 7,000 m3/h - Compressed air consumption: approx. 100 NL/h (varies with equipment) - Minimum workpiece size: 250 mm x 25 mm x 6 mm - Maximum workpiece size: unlimited length x 1,300 mm width x 50 mm height --------------------------------------------------------------- Please also note that the machine is not  ...

Sprühdüsen Ejektordüsen Nebeldüsen Wasch-Reinigungsdüsen Spray nozzles Eductor nozzle Misting nozzles Washing - cleaning nozzles

Manufacturer: Giradina, Type: Dualtech, Year: 2007, Control: Programm, Spraying heads - total: 4, Working width mm: 1350, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Einlaufband: yes, Feeding speed m/min: 2,5-7,5, Wight approx. kg: 6000, Year :2007