We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,882 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Dry steam cleaner with only 208 operating hours Menikini Steam Master dry steam unit from 2015 With hose and spray nozzle Power supply 400Volt, CEE 32A Power: 19.5kW Heating time approx. 7 minutes Operating pressure approx. 10 bar Boiler temperature approx. 180 degrees 16 liter stainless steel kettle Water tank for steam generation 25 litres Detergent tank 5 litres A cleaning agent can be added to the spray nozzle in addition to the steam. The device is suitable for continuous operation. Industrial version in stainless steel Well suited for cleaning and hygienizing surfaces, e.g. in industry and the food industry. Dimensions approx. 950 x 490 x 1000mm (LxWxH). Weight approx. 120kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".
used
Used lab spray dryer Buchi B-290 Power consumption: max. 2900 W Connection voltage: 200 – 230 V ± 10 % Frequency: 50/60 Hz Environmental conditions: for indoor use only Temperature: 5 – 40 °C Altitude: up to 2000 m Humidity: maximum relative humidity 80% for temperatures up to 31°C decreasing linearly to 50% relative humidity at 40°C Evaporating capacity: 1.0 l/h H2O, higher for organic solvents Airflow: max. of 35 m3/h Motor control: Frequency converter Max. temperature input: 220 °C Heating capacity: 2300 W Heating control: PT-100, fuzzy logic, control accuracy ± 2 °C Interface: Serial port RS-232 for all parameters Spray gas: Compressed air or nitrogen / 200 – 800 l/h, 5 – 8 bar Nozzle tip diameter: 0.7 mm standard, other sizes 1.4 and 2.0 mm available Possible particle diameter range: 1 – 25 µm Mean residence time: 1.0 – 1.5 sec. Pollution deg ...
GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.18300 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinNC swivel rotary table with pallet carrierTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 ...
used
Single-chamber spray cleaning system FRANKE SRF-1000 l-RRS - Year of construction 09/2001 - 3 tanks -Stainless steel - Thermal insulation of the system - Spraying system arranged on all sides - Spray pipes with nozzle loading - Thermostatic heating control - Overheating protection for heaters - Level monitoring - Steam extraction fan - Removable filter basket - Lifting door with electromechanical drive - PLC control - SRF with special usable height and sliding door as well as transverse transfer carriage - Cleaning medium: water-soluble, non-flammable cleaners - Usable dimensions 1450x1450x1000 mm – 1000 kg - Electrical connection 3x 400 V 50 Hz + PE + N - Compressed air connection 6 bar - Fresh water connection 1/2" - Transport data System 3050x2200x3000 mm – 3000 kg Cart 1100x1150x300 mm – 45 kg Transverse sliding device 3800x1200x930 mm – 60 k ...
used
GEA Aeromatic-Fielder MP1 Fluid Bed Granulator, with two bowls suitable for batch sizes from 1 to 5kg (0.5kg/l), and 1.1 to 8kg, with drying, top spray granulation, and precision coating of pellets/mini tablets. WIP system. Class D containment, 10 bar pressure, ATEX, PLC controller on front panel, 3 stainless steel filter cartridges, solvent emission control, spray systems, full inlet air handling and preparation system. New in 2005 and unused.
used
Arburg 470C-2000-675 (No. 40) without picker Built: 1998 TECHNICAL DATA Screw diameter [mm]: 60 Spray weight [g]: 427 Spray pressure [bar]: 1440 Closing force [kN]: 2000 Tie bar distance [mm]: 470x470 Clamping plate size [mm]: 715x715 Tool installation height min. [mm]: 250 Control Control: Selogica Monitor: Yes Control cabinet: Yes Language: Polish, German Other Power [kW]: 45.8 Engine hours [h]: 94737 Weight [kg]: 6630 GR - EUROMAP
working range without repositioning X: 2500 mm working range Y: 1270 mm Control: Bosch PNC-P Punch power: 165 KN Laser power: 3000 Watt Plate thickness max.: 6 mm Standard configuration Machine - Working Range 2500 x 1270 mm - Stable C-frame for easy access - Coordinate guide for high precision machining - Linear magazine with 19 tool stations including and 2 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning unit with programmable stripper - Brush tables - Parts chute 300 x 500mm - Chip container - Good parts container - Enclosed beam delivery via fiber optic cable - ContourLine - FocusLine - NitroLine - Seperate main switch machine and laser Punching head - Hydraulic punching head - Programmable presser foot - Tool length compensation - Spray lubrication for punches - Vacuum slug removal - forming Control - Open controller based on ...
used
Key data: 350 , 50 , 30
Manufacturer: Battenfeld Type: Plus 350/75 Built: 2004 Control: Unilog B2 Closing force: 350 kN Closing type: Hydraulic Tie bar ratio: 270 mm Plate size: 470 mm x 285 mm Tool installation height: min. 150 mm max 250 mm Opening distance: 200 mm Plate spacing max.: 450 mm Screw: 22 mm Lifting volume: 38 cc Spray weight PS: 34.5 gram HP Spray pressure: 1627 bar General Engine: 7.5 kW Heating: 2.7 kW Dimensions: 2.3 m x 0.9 m x 1.3 m Weight: 1100 kg Screen text: German / English Additional equipment Robot interface
used
Key data: 500 , 130 , 35
Manufacturer: Battenfeld Type: BA 500/210 TM Built: 2000 Control: Unilog B2 Closing force: 500 kN Closing type: Knee lever Tie bar distance: 320 mm x 320 mm Plate size: 490 mm x 490 mm Tool installation height: min 150 mm max 350 mm Opening distance: 250 mm Plate spacing max.: 600 mm Screw: 35 mm Lifting volume: 144 cc Spray weight PS: 130 gram PS Spray pressure: 1500 bar General Engine: 11 kW Heating: 10.4 kW Dimensions: 3.3 m x 1.1 m x 1.7 m Weight: 2500 kg Screen text: German / English Additional equipment Robot interface Core train: x1
used
Key data: 750 , 198 , 40
Manufacturer: Battenfeld Type: BA 750 - 350 TM Built: 2000 Control: Unilog B4 Closing force: 750 kN Closing type: Knee lever Tie bar distance: 370 mm x 370 mm Plate size: 590 mm x 590 mm Tool installation height: min 200 mm max 400 mm Opening distance: 330 mm Plate spacing max.: 730 mm Screw: 40 mm Lifting volume: 220 cc Spray weight PS: 198 gram PS Spray pressure: 1595 bar General Engine: 15 kW Heating: 12.1 kW Dimensions: 3.8 m x 1.3 m x 1.8 m Weight: 3300 kg Screen text: German / English Additional equipment Robot interface Core train: x1
used
Key data: 1000 , 291 , 45
Manufacturer: Battenfeld Type: BA 1000/525 TM Built: 2002 Control: Unilog B4 Closing force: 1000 kN Closing type: Knee lever Tie bar ratio: 420 mm x 420 mm Plate size: 640 mm x 640 mm Tool installation height: min 200 mm max 450 mm Opening distance: 330 mm Plate spacing max.: 830 mm Screw: 45 mm Lifting volume: 318 cc Spray weight PS: 291 gram PS Spray pressure: 1659 bar General Engine: 18.5 kW Heating: 13.8 kW Dimensions: 4.1 m x 1.3 m x 1.8 m Weight: 3900 kg Screen text: German / English Additional equipment Robot interface Core train: x2
used
Boy 90A (No. 101) Built: 2006 TECHNICAL DATA Screw diameter [mm]: 42 Spray weight [g]: 193 Spray pressure [bar]: 1724 Closing force [kN]: 900 Tie bar distance [mm]: 430x360 Clamping plate size [mm]: 635 x 610 Tool installation height min. [mm]: 250 Control Control: Procan CT Monitor: Yes Control cabinet: Yes Other Power [kW]: 26.3 Engine hours [h]: 16969 Dimensions [m]: 4.9 x 1.2 x 2.1 Bjqmbwo2fl Weight [kg]: 3100
used
Key data: 550 , 67 , 28
Type: 55 M Built: 2003 Control: Procan MD Closing type: Hydraulic Technical data Closing force: 550 kN Tie bar distance H x V: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance max.: 400 mm Plate spacing max.: 650 mm Screw diameter: 28 mm Lifting volume / spray weight (PS): 73.9 cc / 67 gram hp Spray pressure: 2778 bar General data Engine: 11 kW Heating: 9.6 kW Operating hours: on request Dimensions L x W x H: 3.3 m 1.8 m x 1.3 m Weight: 2430 kg Accessories Screen text: German Manual: Yes Additional equipment: Core train: x2 Robot interface
used
Bohle BFC 200 Ex CIP Film Coater for tablets, etc., batch size from 100 to 300 litre, spray arm with up to 6 spray nozzels, CIP-system, 37 kW, Siemens SIMATIC S5, machine net weight approx. 2500 kg, includes inlet air preperation/handling and exhaust air handling
used
Powder coating line: 1. Chain conveyor 2. Continuous painting furnace 3. Pass-through spray booths connected to the paint recovery system: 3 pcs. 4. Pass powder cabins without recovery: 3 pcs / pass-through spray booths without recovery: 2 pcs. 5. Manipulator (up & down movement) with powder sprayer: 1 pc. Automatic manipulator (up-down) with paint applicator: 1 pc. 6. Powder sprayer: 1 pc/ powder paint applicator 1 pc.
new
Open spray level 2x2.1x2.2 The overspray in powdering is absorbed via the suction unit. The powder spray stand is delivered on rollers and is thus mobile. - The suction is equipped with a 60 L powder container (rollbar). - The first stage is 4 filters in the suction system. - Above the cabin is the Absolute filter. 1. Dimensions of the powder level width 2,000 mm Depth 2,100 mm Height 2,200 mm 2. Fan 1 pc. 6,000 m3/h Electric motor 3.0 kW 3. Filter 325x600 4 pcs. Type Filter cartridges 4. Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5. Absolute filter 1 pc. type pocket filter
used
DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Built: 2003 specifications Screw diameter [mm]: 35 Spray weight [g]: 150 Spray pressure [bar]: 1865 Closing force [kN]: 1000 Tie bar distance [mm]: 420x420 Clamping plate size [mm]: 600x600 Tool installation height min. [mm]: 200 control Control: ERGOcontrol Monitor: Yes Control cabinet: Yes Language: Yes other Power [kW]: 46.7 Engine hours [h]: 67455 Dimensions [m]: 4.6x1.5x2.1 Weight [kg]: 6500 - KNIESCHLIESSEINHEIT - CORE TRAIN - EUROMAP - AIR VALVE
used
Aburg 470C-2000-800 SKU: 49 Availability: In stock Built: 2006 Brand: Arburg specifications Spray weight: 510 g Closing force 2000 kN Screw diameter: 60 mm Spray pressure: 1380 bar Tie bar ratio: 470x470 mm Clamping plate size: 730 x 730 mm Tool installation height min.: 250 mm Control: Selogica Language: Polish Power: 44.9 kW Engine hours: 57310 h Weight: 6830 kg Air valve: Yes
new
saw blade diameter: 450 x 32 x 4 mm turning speeds: 3000 U/min : 210 x 170 mm : 130 x 130 mm Capacity 45° rectangular: 145 x 170 mm : 100 x 100 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 2,2 / 3,0 kW weight of the machine ca.: 180 kg dimensions of the machine ca.: 850 x 970 x 1370 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting ...
new
cutting diameter: 305 mm capacity 90 degrees: flat: 350 x 200 mm capacity 90 degrees: square: 260 mm capacity 45 degrees: flat: 230 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: square: 230 mm capacity 60 degrees: flat: 170 x 100 mm capacity 60 degrees: square: 155 mm capacity 60 degrees: round: 175 mm turning speed range:: 18 – 110 m/min dimensions of saw-band: 3.375 x 27 x 0,90 mm work height max.: 880 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 840 kg dimensions of the machine ca.: 1.900 x 1.850 x 2000 mm Furnishing : - Miter left 45 ° automatic operation - Miter left 60 ° semi-automatic operation - Saw material and feed unit - Fine adjustment of the feed and manual cut - Capable of full material - Material detection - Vertical vice - Sacrificial material turntable - CNC Control including special accessories (): - SET GBS 305 micro spray ...
new
saw blade diameter: 400 x 32 x 4 mm turning speeds: 3580 U/min : 150 x 100 mm : 120 x 120 mm Capacity 45° rectangular: 130 x 80 mm : 100 x 100 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 1,5 / 2,0 kW weight of the machine ca.: 132 kg dimensions of the machine ca.: 720 x 760 x 1330 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting ...
used
GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...
used
GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...
used
GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...
used
GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...
new
saw blade diameter: 500 x 32 x 4 mm turning speeds: 3580 U/min : 230 x 180 mm : 135 x 135 mm Capacity 45° rectangular: 165 x 180 mm : 115 x115 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 3,0 / 4,0 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 980 x 1130 x 1430 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting ...
new
saw blade diameter: 550 x 32 x 4 mm turning speeds: 3580 U/min : 260 x 200 mm : 155 x 155 mm Capacity 45° rectangular: 180 x 200 mm : 130 x 130 mm operating pressure: 6 - 8 bar voltage: 380 V total power requirement: 3 / 4 kW weight of the machine ca.: 220 kg dimensions of the machine ca.: 980 x 1130 x 1430 mm Standard Accessories Two hand safety operation Mitres up to 45° Right & Left 45°-30°-22.5°-15°-0° location points Intermediate angles via lock handle Easy access blade change Movable back-fence for larger cutting capacity Protective hood with safety switch Hydro pneumatic blade feed for smooth cutting (fully adjustable) Pneumatic twin vertical clamps Air dust gun included Roller support table included (2m) High quality blade included Spray mist blade lubricator (optional) Horizontal clamps (optional) Optional Equipment Hydro-check for cutting al ...
used
Warehouse No.: 503010 Manufacturer: NETSTAL Type: SynErgy 1500k-600 Control: DSP 4 Year of construction: 2007 Operating hours: 47942 h Technical data Close page Clamping force: 1500 kN Holmass v: 460 mm Holmass h: 460 mm Plate size h: 700 mm Plate size v: 757 mm Installation height min.: 250 mm Installation height max.: 550 mm Plate position max.: 1000 mm Opening distance: 450 mm Ejector stroke: 150 mm Ejector force: 50 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 55 mm Displacement: 427 cc Spray pressure: 1562 bar Screw length: 23 l/d Screw stroke: 180 mm Screw speed: 860 min Screw torque: 550 N Plasticizing current: 70 g/s PS Injection flow to the outside: 2376 g/s hp Dimensions & Weight Machine dimensions LxWxH: 6.53m x 1.84m x 1.97m Total weight: 10100KG Equipment German scre ...
used
Warehouse No.: 503011 Manufacturer: NETSTAL Type: SynErgy 1500k-600 Control: DSP 4 Year of construction: 2007 Operating hours: 39299 h Technical data Close page Clamping force: 1500 kN Holmass v: 460 mm Holmass h: 460 mm Plate size h: 700 mm Plate size v: 757 mm Installation height min.: 250 mm Installation height max.: 550 mm Plate position max.: 1000 mm Opening distance: 450 mm Ejector stroke: 150 mm Ejector force: 50 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 55 mm Displacement: 427 cc Spray pressure: 1562 bar Screw length: 23 l/d Screw stroke: 180 mm Screw speed: 860 min Screw torque: 550 N Plasticizing current: 70 g/s PS Injection flow to the outside: 2376 g/s hp Dimensions & Weight Machine dimensions LxWxH: 6.53m x 1.84m x 1.97m Total weight: 10100KG Equipment German scre ...
used
DEMAG EXTRA 200-840 ECQ (129) Without funnel Year of construction: 2007 Brand: Demag Specifications Spray weight: 400 g Clamping force 2000 kN Screw diameter: 50 mm Spray pressure: 1646 bar Spar spacing: 580 x 580 mm Clamping plate size: 860 x 860 mm Power: 45 kW Weight: 9000 kg Dimensions: 6.7 x 1.8 m Toggle lever locking unit: Yes
used
Arburg 420C-1000-250 (143) without funnel Year of construction: 1999 Brand: Arburg Specifications Spray weight: 121 g Clamping force 1000 kN Screw diameter: 35 mm Spray pressure: 1820 bar Spar spacing: 420 x 420 mm Clamping plate size: 570 x 570 mm Tool installation height min.: 250 mm Control: Selogica Power: 28.5 kW Operating hours: 40702 h Weight: 3180 kg Dimensions: 5 x 1.8 m Core train Yes Euromap Yes Air valve Yes Gas storage Yes
used
Arburg 520C-2000-675 (154) without funnel General information Item number: 154 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 240 g Clamping force: 2,000 kN Screw diameter: 45 mm Spray pressure: 2500 bar Spar spacing: 520 x 520 mm Clamping plate size: 715 x 715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 126766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Euromap: Yes Air valve: Yes
used
Overview of the assembly: - Release agent spray unit top & bottom - Joining milling unit 2 x 4 kW - Glued part with workpiece preheating, 2 rolls, pressure zone C and QA34 application unit for PU with quick clamping system - autom. Adjustment pressure zone - Preparation for Lasertec activation unit - Hl84 cross-cut unit 0.8 KW - pneum. Adjustment pre-milling unit - Pre-milling unit Bf10 1.5 kW - Mould milling unit Fk11 Manual - Autom. Adjustment of chamfer to radius milling machines - Rolling side probe FK - Pneumatic adjustment FA11 for lateral displacement from the working area - Multi-drawing blade MN 21 autom. for a maximum of 5 different profiles. - Finishing unit (glue joint drawing blade and swabbing ridge) - Detergent spray unit top & bottom - powerControl PC22 Workpiece and edge parameters: - Workpiece width without edge min: - For workpiece thickness ...
used
- 2 ZK yeast tanks, Fabr. BAM, each with a capacity of 59.98 hl, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 feet, with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel cone tip, with agitator in the cone, with Spray head, top with ladder bracket, YOC 1985. - 2 ZK yeast tanks, Fabr. Steinecker, with a capacity of 62 hl each, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 Feet (1 foot on load cell), with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel Cone tip, with agitator in the cone, with spray head, pulled down cleaning line, top with conductor bracket, YOC. 1981.
used
- 2 pressure tanks with 61.1 hl, Fabr. Noble, 2 bar, in stainless steel, single-walled, standing, with manhole in the lower frame, Spray head with downed cleaning line, fittings, with papers, Ø: 1,500 mm, H: 4,200 mm. - 4 pressure tanks with 102.2 hl, Fabr. Noble, 2 bar, in stainless steel, single-walled, standing, with manhole in the lower frame, Spray head with downed cleaning line, fittings, with papers, Ø: 1,800 mm, H: 4,900 mm.
used
Screw diameter 30mm Spray weight 88g Spray pressure 1450bar Dosing volume 99ccm Clamping force 40t Size of clamping plates 550x430mm Controller CC90 (Norwegian language) Weight 3000kg Dimensions 3,51x1,22x1,90m Heating capacity 6.9 kW Total power 21,9kW
used
Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Non-stick spray system Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication Powertouch control
used
Inv. Num. : 5849 Type: IS 220 GN Producer: TOSHIBA Created: 2002 Parameters: Clamping force: 2150 kN Screw diameter: 50 mm Injection capacity: 490 cm³ Injection mass: 450 g Min. height of the clamping plate: 870 mm Min. width of the clamping plate: 820 mm Distance between stands (horizontal): 610 mm Distance between stands (vertical): 560 mm Ejector force: 140 kN Ejector stroke length: 800 mm Maximum spray pressure: 201 MPa Opening the mold: 1060 mm Machine length: 5900 mm Machine width: 1340 mm Machine height: 1840 mm Spray weight: 8600 kg
used
Engel Victory 750/150 Tech (146) without funnel Item number: 146 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 354 g Clamping force: 1,500 kN Screw diameter: 50 mm Spray pressure: 1427(1909) bar Spar spacing: Tie barless mm Clamping plate size: 750 x 850 mm Control: CC200 Language: German Power: 61 kW Operating hours: 98108 h Weight: 9500 kg Dimensions: 5.7 x 2 m Funnel: No Core train: Yes Euromap: Yes
used
Arburg 520C-1300-350 (163) with bimetal plasticizing unit General information Item number: 163 Availability: In stock Year of construction: 1999 Brand: Arburg Specifications Spray weight: 194 g Clamping force: 1,300 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 520x520 mm Clamping plate size: 715x715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 95616 h Weight: 6380 kg Dimensions: 5.1x1.9 m Funnel: No Core train: Yes Euromap: Yes
used
Engel Victory 500/120 Tech (145) without funnel General information Item number: 145 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 231 g Clamping force: 1,200 kN Screw diameter: 40 mm Spray pressure: 1300(2020) bar Spar spacing: Tie barless Clamping plate size: 740 x 680 mm Control: CC200 Language: German Power: 41 kW Operating hours: 96830 h Weight: 7400 kg Dimensions: 5 x 1.7 m Funnel: No Core train: Yes Euromap: Yes
used
Engel Victory 200/50 Focus (150) without funnel General information Item number: 150 Availability: In stock Year of construction: 2007 Brand: Engel Specifications Spray weight: 89 g Clamping force: 500 kN Screw diameter: 30 mm Spray pressure: 1451(2205) bar Spar spacing: Tie barless Clamping plate size: 450 x 500 mm Control: EC 200 Language: German Power: 31 kW Operating hours: 79044 h Weight: 2700 kg Dimensions: 3.5 x 1.4 m Funnel: No Core train: Yes
used
Spotting and test spray press make REIS type TUS 60 / 0K 20Machine -No: 19137/79 Year 1979Technical specifications:Press force: 20 tRetraction force: 10 tgr. stroke: 775 mmEjector force: 3.0 tEjector travel: 200 mmOperating pressure: 175 barTable mounting surface: 570 x 670 mmDistance between columns: 620/470 mmInstallation height: 740 mmPiston diameter: 120 mmDrive power: 7.5 kWtotal installed power: 9.5 kWDimensions L x W x H: 1900 x 1200 x 3100 mmWeight approx: 2300 kgWith- Test spray device- 2 hydr. sockets- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes
used
Arburg 470C-1500-350(166) General information Item number: 166 Availability: In stock Year of construction: 2003 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,500 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 470x470 mm Clamping plate size: 650x650 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 40.2 kW Operating hours: 83824 h Weight: 4410 kg Dimensions: 4.5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes
used
Arburg 470S-1300-350 (170) Hybrid with electric worm drive, without funnel General information Item number: 170 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 127 g Clamping force: 1,300 kN Screw diameter: 35 mm Spray pressure: 2500 bar Spar spacing: 470 x 470 mm Clamping plate size: 650 x 650 mm Tool installation height min.: 275 mm Control: Selogica Language: German Power: 33.9 kW Operating hours: 85,400 h Weight: 5,100 kg Dimensions: 5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes
used
Injection moulding machine ARBURG Allrounder 420 A 1000-400 Warehouse No.: 503130 Manufacturer: ARBURG Type: Allrounder 420 A 1000-400 Control: Selogica Year of construction: 2005 Operating hours: 31000 h Technical data Close page Clamping force: 1000 kN Holmass v: 420 mm Holmass h: 420 mm Plate size h: 570 mm Plate size v: 570 mm Installation height min.: 250 mm Installation height max.: 500 mm Plate height max.: 850 mm Opening distance: 350 mm Ejector stroke: 150 mm Ejector force: 40 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 2500 bar Screw length: 23 l/d Screw stroke: 160 mm Screw speed: 47 min Screw torque: 560 N Injection flow to the outside: 192 g/s hp Number of heating zones: 4 Nozzle travel: 300 mm Dimensions & Weight Machine dim ...
used
Arburg 420C-1000-250 (176) with challenge tape Item number: 176 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 89 g Clamping force: 1,000 kN Screw diameter: 30 mm Spray pressure: 2470 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 25 kW Operating hours: 70,643 h Weight: 3180 kg Dimensions: 4.5x1.7 m Funnel: No Core train: Yes
used
Arburg 420C-1000-350 (174) with challenge tape Item number: 174 Availability: In stock Year of construction: 2001 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,000 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 420x420 mm Clamping plate size: 570x570 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 32.2 kW Operating hours: 89,240 h Weight: 3430 kg Dimensions: 4.4x1.7 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes
used
Key data: 550 , 92 , 32
Manufacturer: Boy Type: 55 MVV Year of construction: 2008 Control: Procan MD Clamping force: 550 kN Type of lock: Hydraulish Spar spacing: 360 mm x 335 mm Plate size: 565 mm x 540 mm Tool installation height: min 250 mm Opening distance: 300 mm Plate spacing max.: 550 mm Screw: 32 mm Displacement: 96.5 cc Spray weight PS: 92.3 gram HP Spray pressure: 2127 bar General Motor: 11 kW Heating: 7,7 kW Dimensions: 3 m x 1.2 m x 3.7 m Weight: 2700 kg Screen text: German / English / French Additional equipment Robot interface