spray used for sale

Jelly Sprayer

Item no. Robatech: 166506

Airless sprayer, painting device, spray pack, paint sprayer, paint spray system -Manufacturer: Wagner, paint sprayer paint spray system -Type: W 100 -Use: for varnishes and glazes -Area performance: 5 m² / 12 min -Dimensions box: 300/140/H260 mm -Weight: 1.5 kg

Fresh Egg Sprayer / Sprayer Manufacturer: frisch Spritzmatic Type: Tape 2 meters - Egg sprayer - completely in stainless steel - YOC: 2004 - 230 volts

-Release agent spraying system for bread baking tins -Grease baking tins -Grease box moulds

Boyens Jelly compact glaze sprayer Serial: 1500112073 2012, Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph

Boyens Jelly compact glaze sprayer Digital temp adjustment, manual adjustable spraying pressure, short warm up time, twin spray guns, 3.5Kw, mobile, 1Ph

Auction-ID: A1-49568-17

High pressure pump / Airless paint sprayer With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

Auction-ID: A3-46141-5755

Operation unprecedented. Auction-ID: A3-46141-4151

WIWA High Pressure Pump 235.42R / 38042, YOC 2000 With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

Dammann DT2800 self-propelled sprayer with DTP7033 – 06/2018 – 7,038 hours – 7,000 liters – 33 meters Specifications: Brand: Dammann Type: DT2800 Spraying system: DTP7033 Year of manufacture: 06/2018, according to nameplate Version: self-propelled sprayer Hours: 7,038 hours, read Spray tank: approx. 7,000 litres Working width: approximately 33 m Number of spray sections: 11 Socket distance: 50 cm Fixed track width: approx. 3,300 mm Tyre size: 520/85R42 Permissible total weight: approx. 18,000 kg Transport width: approx. 3,300 mm Ground clearance: approx. 1,100 mm Length: approx. 8,250–10,600 mm Height: approx. 3,700–4,000 mm Features: Separate clean water tank Hydraulically folding spray boom D-GPS Section Switching Automatic tree control with 6 sensors All-wheel steering Fixed base 2 cameras Central grease lubrication on the undercarriage Ro ...

equipped with petrol engine and pump Auction-ID: A1-50597-128

Auction-ID: A1-50663-1747

On a mobile chassis Auction-ID: A1-50663-1485

Pressure vessel; including platform car; Auction-ID: A1-50707-267

Used and untested Auction-ID: A7-51315-546

Auction-ID: A1-51439-238

Without rolling table Auction-ID: A7-51473-91

Auction-ID: A1-47396-1066

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

Working width approximately 8 meters. Auction-ID: A1-47396-2366

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

Auction-ID: A1-51179-3

Spray nozzle Kremlin 134 . 200 . 400 Dimension: 28 x 28 x 33 mm

High Pressure Spray Gun ECCO 370R 8611 4170 50 See also W550 ! New, with Backing ! Dimensions ( Spray Gun ): 280 x 120 x 60 mm Dimensions( Package ): 280 x 120 x 60 mm

Spray fitting ITW DEVILBISS AGMD 515U AIR: 9 bar MAT: 14 bar CYL: 7 bar Dimensions: 48 x 56 x 113 mm

Spray nozzle KREMLIN TETE N23 V Dimensions: 41 x 41 x 33 mm Minimum order value 50,- €

various Minimum order value 50,- �

Spray nozzle, cartridge EXEL AUTOMOTIVE DEUTSCHLAND B001613 cartridge complete D8 New ! Dimensions(Package): 64 x 64 x 82 mm

2019 WK Systemtechnik ILS 600 – HTL – Ionline Lubrication System Dickschickt preservation system. The oil is applied via nozzles The spray system is a minimum quantity spray system for high-precision dosing of preservative oil. With the spray system you can be coated or oiled reproducibly. By spraying using two-substance nozzles, the finest layer thicknesses can be applied without contact and a wide viscosity range can be covered. The forming medium is in a closed circuit; the excess pressure created by the spray air in the chamber is sucked off at the inlet and outlet using a vacuum lock, so there is no environmental pollution. General data Dimensions (WxHxD) without conveyor units 2486mmx2080mmx2722mm Dimensions with open doors 3265mmx3510mmx2722mm Weight approx. 2500 KG Electrical connection Supply voltage 400 Volt / 50 Hz Power 15kVA Fuse protection 35 A Control v ...

Manufacturer: Giradina, Type: Dualtech, Year: 2007, Control: Programm, Spraying heads - total: 4, Working width mm: 1350, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Einlaufband: yes, Feeding speed m/min: 2,5-7,5, Wight approx. kg: 6000, Year :2007

Manufacturer: Giardina, Type: Dualtech 401, Year: 2007, Control: Programm, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 1500, Spraying line: Ja, Conveyour system: Band, Laquer circles: 3, by rollers: Ja, Jet dryers (number): 2, Sanding machines (number): 1, Design sanding machine no 1: Costa CT 32/1350, IR dryers (number): 1, Belt conveyors (number): 1, Jet dryers (number): 2, Year :2007

Manufacturer: Venyeskob Spritzmaschine Stone, Type: Venspray, Year: 2011, Control: Venyeskob, Work piece width min-max mm: 10-1000, Working widht max mm: 1000, Working hight mm: 120, Spraying heads - total: 2, V-Band Lackrückgewinnung: no, Walzenwäschersytem: no, Transport system steel belt: Kette, Lackierpistolen: 2, Spraying heads - total: 2, Year :2011

Manufacturer: Digicoater , Type: 3080, Year: 2005, Control: Siemens C 7, Work piece width min-max mm: 400 - 3.000, Min.-max. workpiece length in mm: 8.000, Min.-max. workpiece height in mm: 100, Spraying heads - total: 4, work piece detection: yes, Spraying stations: 4, Feeding speed m/min: 1,2 - 4,8, Electrical power consumption kW: 6,4, Required space L x W x H mm: 12.000 x 5.000 x 1.600, Year :2005

Manufacturer: Cefla, Type: Rotostain, Year: 2005, Control: yes, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Pistolenantrieb: 16, Feeding speed m/min: 2,5-10, Year :2005

Manufacturer: Makor, Work piece width min-max mm: 10-225, Min.-max. workpiece length in mm: 300-4800, Min.-max. workpiece height in mm: 110, Vorschub m/min-max/min: 20-60, Laquer circles: 2, Dry exhauster: yes, Spraying heads - total: 4, Working width mm: 300, work piece detection: yes, Conveyour system: Band und Stange, Feeding belt mm: 1500, Brush: 4 Büsten köpfe, Longitudinal feeding: yes, Freitext: Leistenhochtrockner Länge 5500 mm /VA Ausführung Spritzmaschine,

Manufacturer: Superfici, Type: Compact 3 P, Year: 2015, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 90, work piece cleaning: yes, work piece detection: yes, Schnellwechselsystem : yes, Gun carrier: 2, Laquer system - airless: yes, Laquer system - airmix: yes, Transportsystem Papier: yes, Inlet conveyor: yes, wast cleaning: yes, Feeding speed m/min: 2 - 6, Jet drier mm: 12000, Removing belt: yes, Year :2015

Manufacturer: Walther + Cefla UV, Type: Pilot Signier + UV 2000, Spraying line: yes, Work piece width min-max mm: 1300, Spraying machine: Walther, UV dryers - 4 lamps (number): 1,

Manufacturer: Falconi Leistenspritzmaschine, Type: Profiplus, Year: 2007, Control: Programm, Work piece width min-max mm: 10-240, Min.-max. workpiece length in mm: 200, Min.-max. workpiece height in mm: 10-80, Working width mm: 300, work piece detection: yes, Conveyour system: Band/Rolle, Spraying stations: 5, Laquer circles: 1, Laquer system - airless: yes, Laquer recharging: no, Dry exhauster: yes, Feeding belt mm: 400, Feeding speed m/min: 10-60, Number of units: 5, Feeding speed continous adjustable: yes, Feeding speed continous adjustable: yes, Year :2007

Manufacturer: Makor, Type: Kronos, Year: 2009, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 80, work piece cleaning: yes, Conveyour system: Band, Laquer recharging: yes, by rollers: yes, Feeding speed m/min: 1,5 - 10, Wight approx. kg: 4500, Year :2009

Manufacturer: Cefla, Type: ROC 2, Year: 1994, Work piece width min-max mm: 1300, work piece cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2 x 2, Farbkreise: 2, Schnellwechselsystem : yes, Laquer recharging: yes, Transportsystem Band: yes, Year :1994

Manufacturer: Cefla, Type: Beizlinie, Year: 2005, Work piece width min-max mm: 100 - 1300, Min.-max. workpiece length in mm: 3 - 80, Min.-max. workpiece height in mm: 300 - 2010, Working widht max mm: 5, Working width min min mm: yes, Apstapelanlage Typ: no, Cycle rate: yes, Type of stacking system: Bürste D2/1300-15, Conveyour system: yes, Fast exchange system spray gun carrier: Rotostain RT 10, Laquer circles: yes, Laquer system - airless: VS/26-2C, Laquer system - airmix: brush sander, Water cleaning: FEV EU2/7-TT 12850, Working widht mm: Band, Year :2005

Manufacturer: Cefla Rotorstain, Type: Rotor, Year: 2005, Control: Cefla, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, work piece detection: yes, Conveyour system: Band, Spraying stations: 16, Schnellwechselsystem : yes, Gun carrier: 16, Pumps: 2, Laquer system - airless: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: no, Dry exhauster: yes, Feeding speed m/min: 2,5-10, Year :2005

Manufacturer: Cefla Sorbini DMC, Year: ca. 1990, Work piece width min-max mm: 1300, Abstapelanlage Typ: no, Roller coater line: yes, Sanding machines (number): 2, Design sanding machine no 1: Quer Längs Längs, Stain rollers qty.: 2, Laquer roller coaters (number): 2, 2 UV lamps qty.: 1, UV dryers - 3 lamps (number): 2, Year :ca. 1990