We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
current capacity: 63 kVAthroat: 635 mmcontact pressure capacity: 190 - 1140 daNconnected load: 63 KVAwelding power: kVAweight of the machine ca.: 0,75 tdimensions of the machine ca.: 1,1 x 0,7 x 1,6 mSpot welding machine with:- with sheet metal support bracket- Footswitch- incl. tool cabinet with accessories see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Connection - 380 V, 50 Hz, control voltage 24 V, output at 100% ED 3.5 kVA, Btto 235 kg, more tech. Info from nameplate
used
Spot welding machine make ARO type N 303Machine -No: YR231122 Year 1982Welding power at 50% ED: 15 kVAElectrode holding force: 70 - 150 kgextendable electrode holders: 220 - 540 mmWelding time setting: 0.05 - 1.5 sec.Welding power sheet metal: 0.5 - 2.0 mmWelding performance of round iron: 4.0 - 10 mmWith- FootswitchUsed, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Spot welding gun make ARO type P 295 AWMachine -No: 00224/79 with control unitPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Spot welding machine make ARO type PSM 150Machine -No: 1021 Year 1986Rated power at 50% ED 15 kVAArm distance 190 mmProjection 150 mmElectrode holding force 95 - 318 daNOpen circuit voltage 6 steps 2.1 - 4.22 VShort-circuit current max. 29.5 kAMaximum welding power 100 kVAPrimary voltage 380 V / 50 HzWith- MIG-O-MAT- Control Aro T1000C, -No: 2062335 Code ZT488662- extended special electrodes 250 mm projection- Separate control cabinet with 6 power levels- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Rated power at 50%ED: 35kVA Short circuit current: 11kA Electrode power: 200daN/EH Projection: 800mm --- Control: MPS 10 (5 times, 8 program) --- incl. - Pipe arm - Foot switch - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
used
Rated power at 50%ED: 50kVA Short circuit current: 23kA Electrode force: 470daN / single stroke Projection: 410mm Arm spacing, infinitely variable: 180-510mm Electrode Cone: Mk2 --- Welding control: WS 708 (7-times, 8-program) --- Incl. additional options: - Two-hand start / footswitch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
used
Power: 10 KVA Arm length: 350 mm Machine LxWxH: Machine weight: 150 kg
used
Water cooled spot welding gun make DALEX type 3218Mash. -No: 31113.2Connected load: 28 kVARated power: 16 kVA at 50% EDOperating current: 10.8 kVA at 50% EDProjection: 350 mmShort-circuit current: 13.5 kAPower connection: 380 V / 50 HzWith- Control Dalex RB 11-1, -No: 03HA172 / 87- Water cooling unit Dalexused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Spot welding gun make DALEX type 3326-3Masch. -No: 1L3002 / 1 Year of construction Nov.1971Projection: 400 mmPower at 50% ED: 22 kVASec. Short-circuit current: 14 KAOutreach: 500 mmConnected load: 34.8 kVAOperating current at 50% ED: 5.4 kVAElectrode force: 280 daNWeight: 37 kgWith- Control unit type J 5 WS 4used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Spot welding gun make DALEX type 3326-4Fabr. -No: 91 M 64709 Year 1991Rated power at 50% ED: 22 kVAsec. Short circuit current: 14 KAElectrode force: 280 daNArm distance: 140 mmWelding power: 3 + 3/4 + 4 mmDischarge: 600 mmWith- Control- Weight balancelittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Spot welding guns --- Rated power at 50%ED: 25kVA Short circuit current: 22.5kA Electrode force: 600daN / double stroke Projection: 170mm --- - Electrode arm top-straight E34/25/170g - Electrode arm bottom-straight E34/8/170g --- Welding control: MPS 1036 (5 times, 1 program) --- Spring tension on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
used
Spot welding gun make DALEX type 3426.2Fabr. -No: 3K66Connected load: 35 kVARated power at 50% EA: 25 kVAOperating current: 14 kA at 50% EDShort-circuit current: 16.5 kAMax. Electrode force: 5 - 540 kpArm distance: 170 mmWelding values: 5 + 5 mmWith- Control- BalancerusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Rated power at 50%ED: 63kVA Short-circuit current: 31kA Electrode force: 730daN / double stroke Extension: 500mm --- - Electrode arm top-straight D45/25/500g - Electrode arm bottom-straight D45/2/500g --- Welding control: MPS 10 (5-times, 8-program) --- Spring pull on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
used
Pneumatically operated table top welding machine make DALEX type F 82-1Year 1972Rated power 50% ED: 10 kVAContinuous power: 7.0 kVAMaximum short circuit power: 42.2 kVAMaximum welding power: 33.7 kVAConnected load: 25.3 kVANumber of control levels: 10Working stroke stepless: 40 mmElectrode force: 5 - 90 kPArm distance min./max.: 118 mmPerformance sheet steel: 2.5 + 2.5 mmPerformance brass: 1.5 + 1.5 mmPower aluminum: 1,2 + 1,2 mmPerformance round bar: 8.0 + 8.0 mmWeight approx.: 110 kgOutside dimensions approx.: 1010 x 690 x 1120 mmWith- Asynchronous four-time control unit ZG 1-2used, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regard ...
used
Key data: 100 kVA, 350 mm, 600 kp
Rated power at 50%ED: 100kVA Short circuit current: 41.5kA Electrode force: 100-600daN / single stroke Projection: 350-650mm --- Welding control: MPS 200 (5-time, 4-program) --- Incl. additional options: - Footswitch with "de-energized" attachment - Flow monitor, electronic -Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
new
Rated output at 50% ED: 100kVA Short circuit current: 41, 5kA Eletrodenkraft: 100-600daN / DH Projection: 350-650mm --- Control: MPS 200multiR1 (8 times, 8-program) --- incl. additional options: -Foot switch -Double stroke cylinder -Flow switch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock
used
Rated power at 50%ED: 63kVA Short circuit current: 26.3kA Electrode force: 65-390daN / single stroke Projection: 450 - 750mm --- Welding control: MPS 10beta (5 times, 8 program) --- Incl. additional options: - Foot switch with "de-energized attachment" -Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
new
Rated output at 50% ED: 63kVA Short circuit current: 31, 5kA Eletrodenkraft: 100-600daN / EH Projection: 250-550mm --- Control: MPS 10 (5 times, 8-program) --- incl. additional options: -Foot switch "unpowered setting up" -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock
used
Rated power at 50%ED: 80kVA Short circuit current: 35kA Electrode force: 100-600daN Projection: 350-650mm --- Welding control: MPS 15036 (5-time, 1-program) --- Incl. additional options: - Double-foot switch with "powerless touchdown" - Flow monitor - Tubular arm cone Mk2, inclined --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
new
Rated output at 50% ED: 80kVA Short circuit current: 35kA Electrode force: 100-600daN / easy lift Projection: 350-650mm --- Welding control: MPS 10 (5 times, 8-program) --- Incl. additional options: -Flow switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock
used
Rated power at 50%DC: 25kVA Short-circuit current: 22.4kA Electrode force: 17-278daN Projection: 180-500mm --- Welding control: MPS 10beta (5 times, 8 program) --- Incl. additional options: - Double foot switch with "de-energized touchdown" - With standard electrode arms -Main switch - 4m connection cable with plug --- Warranty: 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
used
current capacity: - kVAthroat: - mmcontact pressure capacity: - kpRated power ( 50% ED ) : 50 kVAContinuous power : 35.4 kVAMaximum short circuit power : 163 kVAHigh welding power : 130 kVAArm distance min. / max. : 60 / 230 mmElectrode arm Ø : 45 mmElectrode holder Ø : 25 mmOutreach : 610 mmMachine weight: approx. 285 kgDimensions : 1200 x 700 x 1450 mmincl. foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
current capacity: 63 kVAthroat: 650 mmPower connection: 97 kVAcontact pressure capacity: 86 - 510 kpcontinual load: 44,5 kVAwork stroke adjustable: stufenlos/stepless air pressure - required: 6,8 barstrokes per minute until: max. 400 water point: 5,8 barweight of the machine ca.: 460 kgdimensions of the machine ca.: 0,5 x 1,3 x 1,58 mCondition: ready for operation: Electric 380 Volt: Foot switch: Sep. switch gear cabinet: 0,47 x 0,3 x 1,3 mSpot welding machine with automatic stepping and synchronous control unit R33T, number of control stages asynchronous/synchronous 8/2 phase control, 40 mm working strokes for single stroke, 20 mm for double stroke, 95 mm for long stroke.The machine was used in a well-kept small business to produce special stainless steel parts for kitchens, laboratories and clinics and was only operated by the owner. Another control unit R33T is available as a spare ...
used
Water-cooled projection welder make DALEX type PMS 11-3Masch. -No: 8809215 Year 1992Rated power: 63 kVAConnected load: 174 kVAOperating current at 50% ED: 11.06 kVASec short-circuit current: 48.5 KAOpen circuit voltage: 0 - 5.6 VElectrode holding force: 100 - 600 daNWeight approx. 398 kgWith- Bump welding set in agreement as desired- 5TT controlused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Rated power at 50% DC: 100 kVA Projection: 1100 mm Electrode force adjustable: 100 - 600 daN Electrode arm adjustment: 300 mm required air pressure: 6 bar Welding capacity max.: 162 kVA Weight: 670 kg Space requirements: 2000 x 700 x 1850 mm
new
Rated power at 50%ED: 80kVA Short-circuit current: 35.9kA Electrode force: 100-600daN/DH Projection: 550mm --- Welding control: Filius classic 128 programs Machine control PLC Siemens S7-1200F --- Incl. additional options: - Double foot switch - Safety valve 2-channel - Pressure-free lowering of the upper fitting - Adjustment device - Forearm support - Flow monitor, electronic - Electrode power switch, electronic - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage
used
Spot welding machine make DALEX type PMS 11/50 SMachine -No: 9641217 Year of construction 1964Rated power at 50% ED: 50 kVAConnected load: 80 kVAsec. Short circuit power: 23 KAElectrode holding force: 170-510 Kp.Operating current: 9.3 KAProjection: 360 mmDimensions: 1100 x 400 x 1500 mmWeight approx .: 418 kgWith- Electrode arm below- Bump welding table 100 x 100 above- water cooled versionWITHOUT control!used, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Foot-operated spot welding machine make DALEX type SF 16/71Mash. -No: 4714325/1Rated power at 50% ED: 16 kVAConnected load: 37 kVAsec. Short circuit current: 17 KAProjection: 350 mm8-step no-load voltage: 1.8 - 3.6 VCurrent time switch: 3 - 100Weight approx: 192 kgWith- Electrode arms as desired- water cooled version- movable undercarriageused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
specifications: - Rated power at 50% ED 25 kVA - max. Welding power 107 kVA - Discharge adjustable 140 - 300 mm - Welding values - steel sheet 6 + 6 mm - Brass sheet 3 + 3 mm - Alublech 1.2 + 1.2 mm - Electrode force adjustable - Control DALEX 1 - 01 TT - Foot button - Cooling water quantity 8 l/min - Drive 380 V - Space requirement approx. W 670 x H 1250 x D 1550 mm - Weight approx. 240 kg
used
Foot-operated spot welding machine make DALEX type SF 25/71Mash. -No: 7798556-4Rated power: 25 kVAConnected load: 80.5 kVARated primary voltage: 380VOperating current at 50% ED: 4.4 kASecondary short-circuit current: 22.4 kAOpen circuit voltage: 1.8 - 5.2 V in 8 stepsProjection: 715 mmElectrode force: 17 - 278 daNfor sheets up to: 3 + 3 mmWelding time limit for current time: 3 - 100Space required: 450 x 1150 x 1250 mmWith- Actuation via foot lever- Welding current control in 8 stagesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
new
Rated power at 50%ED: 20kVA Short-circuit current: 15kA Electrode force: 420daN Extension: 130-500mm --- Controls: RS 17 (5-times, 2-program) --- incl. additional options: - Foot switch "powerless set-up" - Tube arm Mk2, straight - Main switch - 3m connection cable with plug --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
new
Rated power at 50%ED: 30kVA Short circuit current: 20kA Electrode power: 420daN Projection: 380-700mm --- Control: RS 17 (5 times, 2 program) --- incl. additional options: - Foot switch "powerless touchdown" - Tube arm Mk2, straight - Main switch - 3m connection cable with plug --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
used
Used but fully functional. Cooling unit for water cooling also available. Manufacturer: Dalex Type: SL 16-2G Year of construction: not apparent Length of electrode arms: 600mm Foot switch Equipment: • Electrode arms L = 600mm • Substructure / elevation 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.
used
Point Welding Machine - Dalex - SL16-1 - Series No.:118813458 - Control: MPS-1036 - Built: c. 1995 - Electric foot switches - 4 - Operating modes - Rated power b.50% ED-16 kVA - max. Welding power 50 kVA
used
current capacity: - kVAthroat: - mmcontact pressure capacity: - kpRated power ( 50% ED ) : 25 kVAmaximum short-circuit current: 22.4 kVAMaximum welding power : 107 kVACooling water quantity : 4 l/minElectrode arm Ø : 45 mmElectrode holder Ø : 25 mmProjection : 460 mmElectrode force : 17 to 278 daNMachine weight : 240 kgDimensions : 1100 x 750 x 1250 mmincl. foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Spot welding machine make ESFA Aue / Sa. Type TP 8Make -No: 69410Pressure: 3 - 30 kgProjection: 180 mmDistance between the electrode holders: 140 mmAB: 50% EDElectr. Perm. at rated power: 1800 pcs./hVoltage: 380 V, 50 HzExternal dimensions: 650 x 450 x 1150 mmWith- Foot control- Underframe self-made- Cooling device homemadeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Stud welding machine make HBS type Rotamat 800Machine -No: 511433 Year 2004Welding machine for welding hollow cylindrical fasteners with magnetically moved arcWelding range: M 4 - M 12Welding material: unalloyed, low-alloyed and high-alloyed steelWelding sequence: up to 20 pcs. / Min.Welding time: 5 - 990 msWelding current: 300/400/550/800 AConnected load: 380 V / 50 HzWeight approx: 48 kgOutside dimensions approx: 490 x 320 x 250 mmWith- Gas connection- Ground cable- Welding gun PMH 70 (with lift ignition)- Welding pistol A 12Performance nuts: from M 6 to M 12Welding of threaded sleeves and bushings made of steel and stainless steel possiblevery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and ...
used
Total power: 6.5-12 kW Machine weight: 160 kg Dimensions (W x D x H): 0.9 x 0.8 x 1.1 m Condition: good, ready for operation Arm 350 mm with cooling Welding time adjustable U = 1,2-2,2, CHF 50 Input a phase 220 V, I = 29 A
used
Spot welding machine make KUKA type K 15 / PFactory no. 177, built in 1972Rated power at 50% ED: 15 kVAElectrode force of: 50 - 200 kpNominal primary voltage and frequency: 380 V, 50 HzDischarge: 320 mmConnected load: 32 kVAOpen circuit voltage: 1.7 - 3.0 VOperating current at 50% ED: 5 kASecondary short-circuit current: 18 kAusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Rated power at 50%ED: 15kVA Short-circuit current: 14.4kA Electrode force: 40-240daN / single stroke Projection: 300mm --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
used
Spot welding machine make MEGATRONIC type TBN 20/400Fabr. -No: 210/88, built in 1988Electrode force: 120 - 300 daNWelding power: 20 kVAPrimary voltage: 19 kVAProjection: 400 mmRated current: 5.7 kAsec. Short-circuit current: 9 kA:Leelaufspannung: 1.4 - 3.5 V in 4 stagesVoltage: 380VExternal dimensions L x W x H: 950 x 350 x 1600 mmWith:- Control type RÖ 533 b KusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Rated power at 50%ED: 22kVA Short circuit current: 14.1kA Electrode force: 345daN Projection: 320mm --- Welding control: accent T-1060/8 (6-times, 8-program) --- Incl. additional options: - Electrode arms 320mm projection top + bottom straight, cone A2/1:10=12 - Spring tension - 10m connection hose package control/pliers - Welding control -Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
used
Weber, Masch. No. 1109226, orbital riveting machine with RT-stand Motor M 631 / 4 0.18 kW 1360 RPM KMT - APK T-3-S-60-Z SN 307 89 01 Riveting time - adjustable 0.15-3 s Control - Siemens Simatic S 7-200 External dimensions 30 x 20 x 86 cm - riveting machine Panel 50 x 40 x 30 cm More info and details. Photos upon request I am retailer offers to similar machines interested in financing through leasing or hire-purchase request send data protection
used
Inv. Num. : 6133 Type: PW 75/5 Producer: PROFIWELD Created: 2015 Parameters: Connection voltage: 480 V Power: 75 kVA Pressure: 0.6 MPa Cooling water flow: 12 l/min Frequency: 50/60 Hz
used
WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS - CONNECTION: 380V/50Hz - WELDING NOMINAL POWER - 56 kWA AT 50% - S MAX: 135 kWA - Arm distance min /max : 218/468 in mm - THROAT IN 450mm - CLOSING FORCE: 4KN - COOLING WATER REQUIREMENT: 6 liter / min 2. AWAILIBLE 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS included with safety glass and two button pust operational system. with all safety system integrated and working table.
used
Stud welding machine make SOYER type BMS 600Fabr. -No: 6601Weldable threaded bolts: 2 - 8 mmExternal dimensions: 400 x 350 x 250 mm highWith- Stud welding gun- Ground cableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Stud welding machine make SOYER type BMS 600Fabr. -No: AH3581, year of construction 1983Weldable threaded bolts: 2 - 8 mmExternal dimensions: 400 x 350 x 250 mm highWith- Stud welding gun- Ground cableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
rated capacity: 10,0 kVA 50% EDwelding power: 20,0 kVA max.contact pressure capacity: 220 daNthroat: 520 mm0: 380 Velectrode stroke: 15 - 85 mmweight: 95,0 kgrange L-W-H: 1000 x 400 x 1100 mmFurnishing:- Spot welding machine from a training workshop- Welding control TE 90 Mark IIWelding control TE 90 is a microprocessor control for single-phaseResistance welding machines. The welding control has the task of:To control machine elements, especially the SCR, which controls the setting of the Control welding current. The duty cycle that the TE 90 performs isdescribed using the programming parameters.- Synchronous control SCR, welding time regulation by phase cut- Easy programming via 4 buttons- Current surge and pulsing- Single point and automatic- Compensation of the secondary current for welding dirty metal sheets and wires- Welding time locking optimizes power consumption from the mains- ...
used
rated capacity: 16,0 kVA 50% EDwelding power: 35,0 kVA max.contact pressure capacity: 240 daNthroat: 230 mm0: 380 Velectrode stroke: 15 - 85 mmweight: 116 kgrange L-W-H: 1000 x 400 x 1100 mmFurnishing:- Spot welding machine from a training workshop- Welding control TE 90 Mark IIWelding control TE 90 is a microprocessor control for single-phaseresistance welding machines. The welding controller has the task ofTo control machine elements, especially the SCR, which controls the adjustment of the control the welding current. The duty cycle that the TE 90 performs isdescribed using the programming parameters.- SCR synchronous control, welding time regulation by phase cut- Simple programming via 4 buttons- Current rise and pulses- Single point and automatic- Secondary current compensation for welding dirty metal sheets and wires- Welding time lock optimizes current draw from the mains- Soleno ...