spo used for sale

Maximum welding power 104 kVA Arm spacing 100 - 500 mm Projection 500 mm Air pressure 60bar

Serial number: 1061 Electrode force: from 15 to 110 kP

Vertical hanging spotwelding machine; movable over vertical axis.

Serial Number: 00826 Voltage: 400 V Max. Power: 230 kVA

On and including mobile base

WMA WMP 08 One-Handed Bumper Air-cooled single-lever butt system for vehicle construction, tank construction, steel cabinet construction, sheet metal processing and wire industry - problem-free welding of all sheet metal - Galvanized sheets can be welded flawlessly by controlled current increase and current reduction - Air-cooled, equipped for external water cooling - Tools are easy to change thanks to standardised rotary connections - Only one plug each for welding power line, control cable and water cooling - Reproducible welding results at any time thanks to built-in, automatic energy control Microprocessor Thyristor Control - Constant current control - Seamless process monitoring - Easy and pleasant to use - All set parameters and process variables can be read at a glance - Changes to welding parameters only for authorized personnel - Management of configuration a ...

MILLUTENSIL spotting press BV30E-RG New machine in stock for sale..

Millutensil spotting press BV25/PM - Output force adjustable (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

current capacity: 16 kVA throat: . mm contact pressure capacity: . kp total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

REIS TUS 115 OK 100 Die Spotting Press pressure 100 t table surface area 890 x 1280 mm ram surface 1000 x 1200 mm distance between columns 1250 mm stroke 1035 mm distance table/ram, max. stroke up, adjustment up 1035 mm side window 700 mm table height over floor 630 mm max. tool weight 7 t max. capacity of swivelling ram plate 3,5 t oil volume 180 l power capacity 9,0 kW weight 11 t Dimensions (WxDxH): 2,1 x 3,8 x 3,9 m swiveling ram movable table table - tiltable ram interlocking hydraulic ejector in table

Key data: 80 kVA, 350 mm, 600 kp

Rated power at 50%ED: 80kVA Short-circuit current: 45.4kA Electrode force: 100-600daN / single stroke Projection: 350mm --- Welding control: MPS 100mono (8 times, 1 program) --- Incl. additional options: - Pre-mounted electrode holder -Foot switch - Adjustment device - Electronic flow monitor - Main switch + transformer tap changer 4-way --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Offer 19013 Specifications: - Rated power at 50% ED 16 kVA - Continuous power 13.5 kVA - Max. welding power 63 kVA - Weld values sheet steel 3.0 + 3.0 mm - Projection approx. 100 mm - Arm spacing 130 mm - Electrode force 280 daN - Air consumption at full load of the pliers approx. 6 l/min - Cooling water volume approx. 8 l/min - Connection / connected load 400 V / 63 kVA - Space requirement approx. W 500 x D 1000 x H 500 mm - Weight approx. 50 kg - with: - separate control unit AKZENT T 504-1 - Hanging bracket with gimbal

Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG

Hydr. Spotting press MILLUTENSIL type BV 25 PMMasch. No. 632 / 25111 Year of construction 1991Clamping force 18 ton. Opening force 15 ton. Table surface 775 x 760 mm Clamping surface of the upper table 900 x 550 mmStand width 900 mmInstallation height max. 750 mmInstallation height min. 230 mmStroke of the upper table 520 mmLifting speed stepless 0 - 1000 mm/min. Hydraulic pressure adjustable 10 - 200 barTool weight on the table max. 2500 kgTool weight on the upper table max. 800 kgTable height

current capacity: 76 kVA throat: 0 mm contact pressure capacity: kp total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Spot Welder mobile, 76 kVA-50%,117 kW Connecting Load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rated power: 63 kVA Projection: 520 mm Electrode arm spacing: 200 mm Welding capacity steel: approx. 7 + 7 mm Welding performance of non-ferrous metals: approx. 2 + 2 mm electr. Connection: 380 V kW

Offer 25128 Specifications: - Rated power at 50% ED 25 kVA - Max. welding power 68 kVA - Adjustable projection 280 to 450 mm - Stroke 5 to 40 mm - Welding values of sheet steel approx. 3 + 3 mm - Electrode force adjustable up to 240 daN - Required air pressure 6 bar - Cooling water volume 4 l/min - Connection 400 V - Space requirement approx. W 800 x H 1700 x D 1050 mm - Weight approx. 220 kg - with: - Single-phase control T 90 Mark II - E. foot switch - Separate cooling water recooling unit

From a current recycling we offer you 3 x 3 modular machines/systems that are used to process spokes of impellers. The French. Manufacturer MACH 1 is a leading manufacturer in this segment. The pictures show a "line". We have 3 of them each. Year of construction 2022 Condition: good Original price: 355.000,00 € net Asset Manager: M. Vorkötter Phone: 0202-25727-3152 Mail: m.vorkoetterakf.de We will be happy to provide you with details upon request. Location: 68753 Waghäusel The sale is without warranty Subject to prior sale

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: ARO Type: M 302 Year of Make: 1971 No. 1063655 380 V ~ 50/60 Hz E 100 100 All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

Spot welding machine DALEX type SL 16 EAMasch. No. 68611900-5 Year of construction 1986Nominal output at 50 % ED 16 KVASwelding capacity max. 50 KVA charge max. 500 mmElectrode force max. 17 - 278 daNElectrode arm 45 mmElectrode holder 25 mmArm spacing 140 mm / 280 mmCircuit breaker 8 stagesControl 4 times with single and series pointsOperating pressure 1-6 barOpen circuit voltage 1.8 to 3.6 voltsConnected load 37 kVANnet connection 400 volts, 50 Hz- Triggering of the welding cycle via

Peco Welding Machine Spot Welding Machine Peco welding system welding of flat strip and electr. Management Peco LA 40 Air Control Bosch E35... DYF welding control You can find more welding systems in other sizes - new and used - in our shop! International shipping costs on request!

Incl. 3 buckets, 1x 80 cm with teeth, 1x 60 cm, 1x 30 cm, suitable for JCB 3CX

A medium-frequency spot welding machine Dalex-Werke is available. Throat depth: 350mm, electrode stroke: 90mm, electrode holder diameter: 30mm, electrode taper: MK2, rated power at 20% duty cycle: 180kVA, max. welding power: 200kVA, primary voltage: 400V, rated frequency: 1000Hz, electrode force: 20daN–600daN. Weight: approx. 575kg, control: HWS 2102. Documentation available. An on-site inspection is possible.

Capacity 50 tons Stroke 750 mm Table size 1500x1000 mm

Key data: 63 kp, 750 , 600

Rated power at 50%ED: 63kVA Short-circuit current: 26.3kA Electrode force: 65-390daN / single stroke Throat: 450-750mm --- Welding control: MPS 15036 (5 times, 1 program) --- Incl. additional options: - Footswitch with "de-energized" touchdown -Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Key data: 40 kp, 550 , 390

Rated power at 50%ED: 40kVA Short-circuit current: 26.2kA Electrode force: 65-390daN / single stroke Throat: 250-550mm --- Welding control: MPS 10 (5 times, 8 program) --- Incl. additional options: - Footswitch with "de-energized" touchdown -Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Key data: 25 kp, 150 , 120

Rated power at 50%ED: 25kVA Short-circuit current: 12kA Electrode force: 120daN / single stroke Projection: 150mm --- Welding Control: AR.01 (5 times, 2 program) --- Incl. additional options: -Foot switch -Main switch - Mounted on aluminium plate --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Spot welding gun --- Rated power at 50%ED: 22kVA Short circuit current: 17kA Electrode force: 360daN / single stroke Projection: 95mm --- - Electrode arm AE/2/96g + C34/2/63g --- Welding control: on request --- Spring balancer on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

A resistance spot welding machine Pei is available. Rated power at 50%: 35kVA, secondary short-circuit current: 19kA, max. welding current: 15.2kA, secondary continuous current: 4.8kA, secondary voltage: 5.3V, electrode force: 180daN, arm spacing range: 140mm-350mm, arm reach: 430mm, arm diameter: 50mm, electrode stroke: 60mm, weight: approx. 280kg. Documentation vorhanden. An on-site inspection is possible.

Key data: 50 t, 1100 mm, 800 mm

Used spotting press, manufacturer Reis, type TUS 80, built in 1999, For more data, see machine map. The sale takes place from the site without dismantling.! The machine was fully functional until the end.

Key data: 40 t

Reis TUS 60 40kn spotting press On offer is a used, but very well preserved spotting press of the Reis brand. The TUS 60 40kn model has proven to be extremely reliable and powerful since it was manufactured in 1981. With an impressive 40 tonne locking mechanism, this machine is perfect for demanding tasks. Details: Year of Make: 1981 Tumbler: 40 tons Although used, this machine is in good condition. It is immediately ready for use and a valuable addition to any workshop.

Key data: 100 t

For sale is a used spotting press from the manufacturer Reis with an adjustable press force of up to 100 t. The 4-column press has a table size of 1600 × 1300 mm, a maximum open height of 950 mm and an ejector in the table, making it particularly suitable for spotting, tuning and tool work in mould and tool making. Here are the technical data of the offered machine: Technical data + information: Spotting press – REIS TUS 80-100 Allgemeine Disclosures - Name: spotting press - Manufacturer: REIS - Type: TUS 80-100 - Type: 4-column press - Year of construction: 1998 - Press force: 26–100 T (adjustable) - Retraction force max.: 45 T - Table size: 1600 x 1300 mm - Max. table load: 5,000 kg - Open height max.: 950 mm - Overall dimensions (WxDxH): approx. 3400 x 4200 x 3700 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm Hydraulik - Hydraulic pum ...

Key data: 40 kp, 550 , 390

Rated power at 50%ED: 40kVA Short-circuit current: 26.2kA Electrode force: 65-390daN / single stroke Throat: 250-550mm Tubular arm cone Mk2, straight --- Welding control: MPS 10 (5 times, 8 program) --- Incl. additional options: - Footswitch with "de-energized" touchdown - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Stationary -Operation via hand switch -Arm length of welding machine: 350 mm -Welding pliers type: -Steering -Machine dimensions: 1500/1000/H1670 mm -Machine weight: 774 kg -Dimensions of control cabinet: 1550/420/H1960 mm -Weight of control cabinet: 330 kg

Color: Black Original packaging Price per unit = 23.00 € Pick-up and shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Black Original packaging Price per unit = 10.00 € + VAT Pick-up and shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Hello, We hereby offer you new, originally-packaged Philips LED street lights of the type BGP307 LED120-4S/740 l DM11 48/76S. Here are some technical data: Manufacturer: Philips ClearWay gen 2 product family Type BGP307 LED120-4S/740 l DM11 48/76S System luminous flux 10200 lm Nominal luminous efficacy 142 lm/W System power 72 W Light colour 740 neutral white Colour temperature 4000 K Optics Type Medium Light Distribution 11 Beam angle 160° - 42° x 54° Input voltage 220 to 240 V Input frequency 50 to 60 Hz Inrush current 47 A Dimensions 330 x 525 x 110 mm (W x L x H) Tube diameter 76 mm Weight approx. 6.13 kg IP66 degree of protection For further technical data, please refer to the manufacturer's pdf product data sheet and pdf assembly instructions, which are available for download. Areas of application, lighting of: Public facilities, sports facilities ...

Hello, We hereby offer you new, originally-packaged Philips LED lamps of the type BVP130 LED210-4S/740 PSU S ALU C1KC3 from the CoreLine Tempo Large product family. Here are some technical data: Manufacturer: Philips CoreLine Tempo Large product family Type BVP130 LED210-4S/740 PSU S ALU C1KC3 System luminous flux 21,000 lm Nominal luminous efficacy 130 lm/W System power 164 W Light colour 740 neutral white Colour temperature 4000 K Optics Type: Symmetrical Beam angle 70° x 21° Input voltage 220 to 240 V Input frequency 50 to 60 Hz Inrush current 58 A Dimensions: 389 x 486 x 40 mm (W x H x D) Weight approx. 7.5 kg IP66 degree of protection For further technical data, please refer to the manufacturer's pdf product data sheet and pdf assembly instructions, which are available for download. Areas of application, lighting of: public facilities, sports facilit ...

Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-action spot welding machine -Manufacturer: Dalex, 2 coupled spot welding machines, with storage table -Type: SL 25/EA -Rated power: 25 kVA each -Projection: 600 mm -Intermediate dimension: up to 1590 mm -Operation: via foot pedal -Individual components: see photos -Dimensions: Machine 2140/1160/H1220 mm / Table 1565/1075/1140 mm -Weight: 535 kg / 112 kg

Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Key data: 40 t, 1280 mm, 900 mm

For sale is a spotting press from the manufacturer REIS with a maximum pressing force of 40 t. The machine has a table size of 1,280 × 900 mm, a maximum installation height of 1,035 mm and a stroke of up to 1,100 mm, making it suitable for spotting work, coordination processes and tool adjustments in mold and tool making. Technical data + information: Spotting press – 40 t – 1,280 × 900 mm General information - Type: 4-column press - Manufacturer: REIS - Year of construction: 1984 - Press force: 40 T (adjustable) - Restoring force: 20 T - Distance between columns: 930 × 705 mm - Max. installation height: 1,035 mm - Table size: 1,280 × 900 mm - Overall dimensions (WxDxH): approx. 3,800 × 1,850 × 3,600 mm - Total weight: approx. 9,000 kg - T-slots: DIN 650 – 18 mm Hydraulic cylinders - Stroke: 0–1,100 mm (adjustable) - Cylinder diameter: Ø 160 mm  ...