spo used for sale

pressure:56 t table length:1000 mm table width:700 mm daylight opening:1200 mm No. of Cylinders:1 St. stroke length max.:1200 mm table height over floor:700 mm table extendable:1200 mm Speed of table:25 mm/sec Table tilting:45 Grad table load:5 t Fold-down upper tool:170 Grad :1250 x 1000 mm :95 mm/sec speed of return flow:80 mm/sec working feed:0 - 10 mm/sec dimensions:4300 x 2700 x 4500 mm total weight:8,5 t Monitor Siemens:9 Zoll :1200 mm

pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:um 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and externally induction hardened and chrome-plated. The linear measuring rod informs the controller of the position of the pestle. The travel path, the upper stop and the switching point at which the press is to switch from empty travel to working speed, as well as the end position to be approached can be entered easily and quickly via the mo ...

pressure:200 t table length:2500 mm table width:2000 mm stroke max.:2050 mm dimensions:ca. 9200 x 4700 x 5800 mm draw back pressure:25 t Approx. weight (w/o operational materials):50 t column diameter:210 mm table speed:25 mm/sec table extendable:2000 mm table speed:30 mm/sec table load:15 t power capacity:20 kW work speed:1 - 10 mm/sec. pre-running speed:10 mm/sec :25 mm/sec :10 mm/sec. Oil Tank Capacity:400 l Oil cooling (electric):1,5 kW (max) Podestal height:650 mm Table Height:800 mm Ram Height:850 mm Control System by Siemens:S7 1200 Monitor:WEG 12 Zoll :10200 ? Maintenance Balcony:5000 ? :4.000,-- ? :1.000,-- ? :18000 ? :1.500,-- ? :12000 ? Upper Tool Folding:170 Grad Swivel table:75 Grad Table tiltable:75 Grad Ajecters with 60T in the pestle centre:12000 ? Blessed plate folding by 180 degrees:14000 ?

Rated output at 50% ED: 80kVA Short circuit current: 35kA Electrode force: 100-600daN / easy lift Projection: 350-650mm --- Welding control: MPS 10 (5 times, 8-program) --- Incl. additional options: -Flow switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Rated output at 50% ED: 25kVA Short circuit current: 14kA Electrode force: 220daN Throat depth: 455mm Arm distance, stufemlos: 168-443 mm Electrodes Cone: Mk1 --- Welding control: WS 402 (4-times, 2 program) --- Incl. additional options: -Foot switch -Main switch -3 m connection cable and Cekon-plug 32A --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Rated output at 50% ED: 60kVA Short circuit current: 24kA Electrode force: 470daN / easy lift Throat depth: 435mm Arm distance, infinitely variable: 180-510 mm Electrodes Cone: Mk2 --- Welding control: WS 708 (7-times, 8-program) --- Incl. additional options: -Two hand start / footswitch -Main switch --- Warranty 6 months --- Training + commissioning on request --- Point welding electrodes + spares available from stock

Spot welding machine make DALEX type PMS 11/50 SMachine -No: 9641217 Year of construction 1964Rated power at 50% ED: 50 kVAConnected load: 80 kVAsec. Short circuit power: 23 KAElectrode holding force: 170-510 Kp.Operating current: 9.3 KAProjection: 360 mmDimensions: 1100 x 400 x 1500 mmWeight approx .: 418 kgWith- Electrode arm below- Bump welding table 100 x 100 above- water cooled versionWITHOUT control!used, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Foot-operated spot welding machine make DALEX type SF 25/71Mash. -No: 7798556-4Rated power: 25 kVAConnected load: 80.5 kVARated primary voltage: 380VOperating current at 50% ED: 4.4 kASecondary short-circuit current: 22.4 kAOpen circuit voltage: 1.8 - 5.2 V in 8 stepsProjection: 715 mmElectrode force: 17 - 278 daNfor sheets up to: 3 + 3 mmWelding time limit for current time: 3 - 100Space required: 450 x 1150 x 1250 mmWith- Actuation via foot lever- Welding current control in 8 stagesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Stud welding machine make HBS type Rotamat 800Machine -No: 511433 Year 2004Welding machine for welding hollow cylindrical fasteners with magnetically moved arcWelding range: M 4 - M 12Welding material: unalloyed, low-alloyed and high-alloyed steelWelding sequence: up to 20 pcs. / Min.Welding time: 5 - 990 msWelding current: 300/400/550/800 AConnected load: 380 V / 50 HzWeight approx: 48 kgOutside dimensions approx: 490 x 320 x 250 mmWith- Gas connection- Ground cable- Welding gun PMH 70 (with lift ignition)- Welding pistol A 12Performance nuts: from M 6 to M 12Welding of threaded sleeves and bushings made of steel and stainless steel possiblevery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and a ...

Total power: 6.5-12 kW Machine weight: 160 kg Dimensions (W x D x H): 0.9 x 0.8 x 1.1 m Condition: good, ready for operation Arm 350 mm with cooling Welding time adjustable U = 1,2-2,2, CHF 50 Input a phase 220 V, I = 29 A

Spot welding machine make ARO type PSM 150Machine -No: 1021 Year 1986Rated power at 50% ED 15 kVAArm distance 190 mmProjection 150 mmElectrode holding force 95 - 318 daNOpen circuit voltage 6 steps 2.1 - 4.22 VShort-circuit current max. 29.5 kAMaximum welding power 100 kVAPrimary voltage 380 V / 50 HzWith- MIG-O-MAT- Control Aro T1000C, -No: 2062335 Code ZT488662- extended special electrodes 250 mm projection- Separate control cabinet with 6 power levels- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatically operated table top welding machine make DALEX type F 82-1Year 1972Rated power 50% ED: 10 kVAContinuous power: 7.0 kVAMaximum short circuit power: 42.2 kVAMaximum welding power: 33.7 kVAConnected load: 25.3 kVANumber of control levels: 10Working stroke stepless: 40 mmElectrode force: 5 - 90 kPArm distance min./max.: 118 mmPerformance sheet steel: 2.5 + 2.5 mmPerformance brass: 1.5 + 1.5 mmPower aluminum: 1,2 + 1,2 mmPerformance round bar: 8.0 + 8.0 mmWeight approx.: 110 kgOutside dimensions approx.: 1010 x 690 x 1120 mmWith- Asynchronous four-time control unit ZG 1-2used, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regard ...

Excavator buckets / rock bucket, very stable, unused The geometry corresponds to a Fang, the tooth holder / cutting edge is rounded, this high performance, grave. Bucket width: 1500 mm Bucket volume: 1 m 3 (piled) base plate for quick coupler: 520 mm (width) x 640 mm (depth) Excavator size: 18-30 to use weight

Rated power at 50%ED: 63kVA Short-circuit current: 31kA Electrode force: 730daN / double stroke Extension: 500mm --- - Electrode arm top-straight D45/25/500g - Electrode arm bottom-straight D45/2/500g --- Welding control: MPS 10 (5-times, 8-program) --- Spring pull on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

2886: 1 gebr. Difiting press 200 kN Fabr. REIS, type TUS 60 OK 20, Bauj. 1991 with hydr. Control Arb.-Ber.: Stroke approx. 700 mm, drive power: 7.5 kW Accessories: extendable table 670 x 570 mm, swing-out top plate 670 x 570 mm, Mounting height 740 mm Other: Passage between the columns 620 mm, Space requirement L/W/H 1870 x 1620 x 3000 mm, Weight approx. 3.5 tons. very good condition

Rated power at 50%ED: 20kVA Short-circuit current: 15kA Electrode force: 420daN Extension: 130-500mm --- Controls: RS 17 (5-times, 2-program) --- incl. additional options: - Foot switch "powerless set-up" - Tube arm Mk2, straight - Main switch - 3m connection cable with plug --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Contactor, contactor, power contactor, spool -Manufacturer: Intrometic, Sp 1 Geber -Dimension: Ø 28 x 127 mm -Weight: 0.3 kg

Point Welding Machine - Dalex - SL16-1 - Series No.:118813458 - Control: MPS-1036 - Built: c. 1995 - Electric foot switches - 4 - Operating modes - Rated power b.50% ED-16 kVA - max. Welding power 50 kVA

Contactor, contactor, power contactor, spool -Manufacturer: Intrometic, coil 4 valve -Dimension: Ø 28 x 127 mm -Weight: 0.2 kg

specifications: - Rated power at 50% ED 25 kVA - max. Welding power 107 kVA - Discharge adjustable 140 - 300 mm - Welding values - steel sheet 6 + 6 mm - Brass sheet 3 + 3 mm - Alublech 1.2 + 1.2 mm - Electrode force adjustable - Control DALEX 1 - 01 TT - Foot button - Cooling water quantity 8 l/min - Drive 380 V - Space requirement approx. W 670 x H 1250 x D 1550 mm - Weight approx. 240 kg

Machine type point welding pliers Make TECNA Type Power Pointer 7900 Connection voltage 1 x 400 V switch-on time 50% ED at 2.0 kVA current setting infinitely variable max. pointable material thickness 2.0 + 2.0 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 7.2 kA discharge min. 125 mm max. 500 mm Weight 12 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,210.00 + VAT Price €720.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 € Item No. n353.5.3910 Electrode sharpener for hand cutting 129.00 € Item N ...

pressure:110 t table length:1200 mm table width:1000 mm stroke max.:1150 mm dimensions:4200 x 2400 x 4800 mm draw back pressure:11 t stroke max.:1150 mm weight:16 t stroke of the table:1200 mm swivable table::45 Grad table load:12 t table speed:25 mm/sec table speed:10 mm/sec power capacity:23 kW voltage:400 V control voltage:24 V DC frequency:50 Hz work speed:0 - 10 mm/sec. :130 mm/sec :195 mm/sec. Colour:Grau 7035 RAL Colour:Orange 2009 RAL Colour:Dunkelgrau 7021 RAL Oil tank capacity:400 l Recommended oil:DIN HLP / ISO VG 46

pressure:100 t table length:1280 mm table width:900 mm stroke max.:1100 mm dimensions:2100 x 3800 x 3900 mm Approx. weight (w/o operational materials):11 t Engine Output:9,5 kW pre-running speed:48 mm/sec Return speed:44 mm/sec Oil Tank Capacity:140 l distance between columns:1150 mm distance table/ram:1035 mm Table height above ground level:630 mm ram surface:1000 x 1200 mm column travel -side:705 mm workpiece weight:max. 7 t Plum:max. 3,5 t Press speed:8 mm/sec

pressure:200 t table length:1500 mm table width:1200 mm stroke max.:1450 mm open height:1650 mm weight:15 t power capacity:22 kW voltage:380 V surface area of ram:1500 x 1200 mm workpiece weight top:max. 4.000 kg workpiece weight max.:10.000 kg rapid traverse - down:48 mm/sec rapid traverse - up:40 mm/sec ram stroke speed - under load:6 mm/sec dist. between pillars (left to right):1250 mm Table height above ground level:630 mm Oil Tank Capacity:400 l

pressure:120 t table length:600 mm table width:600 mm stroke max.:400 mm dimensions:1070 x 2340 x 2800 mm weight:4,2 t pre-running speed:10 mm/sec :26 mm/sec :200 l Oil cooling (electric):1,5 kW (max) table height:875 mm Working height from to:500 mm diameter of piston:230 mm total power requirement:15 kW pump capacity:24 Lt./sec Pressure power:300 bar :76 mm :650 mm capacity of ejector in table:20 t :150 mm Recommended oil:46er

pressure:63 t table length:1200 mm table width:1000 mm stroke max.:1050 mm dimensions:ca. 3350 x 1800 x 4700 mm draw back pressure:6 t Approx. weight (w/o operational materials):10 t column diameter:120 mm Fold-down upper tool:180 Grad Swivable Table:75 Grad table speed:25 mm/sec Table tilting:75 Grad table extendable:1100 mm table load:5 t Engine Output:10 kW Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max) Monitor:(WEG) 12 Zoll

Machine type point welding pliers Make TECNA Type Power Pointer 7902P - Pulse Connection voltage 1 x 400 V switch-on time 50% ED at 2.5 kVA current setting infinitely variable max. pointable material thickness 2.5 + 2.5 mm Version portable handheld device with built-in control Fuse 16 amperes, sluggish Short-circuit power 8.2 kVA discharge min. 125 mm max. 500 mm Special accessories incl. pulse current, especially for galvanized sheets Weight 13 kg Age 12 months Condition as good as new Warranty 18 months from delivery date New price €1,490.00 + VAT Price €890.00 + VAT Car MobiDrive €75.00 Copper rod 10 mm, 1 mtr. long 40.00 €/mtr. Item No. n355.0.0051 Copper rod 12 mm, 1 mtr. long 47.00 €/mtr. Item No. n355.0.0053 Copper rod 14 mm, 1 mtr. long 60.00 €/mtr. Item No. n355.0.0055 Electrode sharpener for drill 34,00 €  ...

Rated power at 50%ED: 35kVA Short circuit current: 19kA Electrode force: 300daN / single stroke Projection: 395mm --- Welding control: WS 708 (7 times, 8 program) --- Incl. additional options: - Foot switch - Pressure-free lowering of the upper fitting - Main switch --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

manually operated, air-cooled Rated power at 50%ED: 2.4kVA Short circuit current: 7.5kA Electrode force max.: 180daN Projection: 250mm --- equipped with: - 5m connection cable - Standard electrode arms 250mm Control RS15 (optional) --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

current capacity: 76 kVA throat: 0 mm contact pressure capacity: kp total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Spot Welder mobile, 76 kVA-50%,117 kW Connecting Load The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

current capacity: 16 kVA throat: . mm contact pressure capacity: . kp total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used but fully functional. Cooling unit for water cooling also available. Manufacturer: Dalex Type: SL 16-2G Year of construction: not apparent Length of electrode arms: 600mm Foot switch Equipment: • Electrode arms L = 600mm • Substructure / elevation 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

Length: 0 mm Width: 0 mm Thickness: 0 mm Accuracy class: 0   Type of material: 0   Technical data Table length: 2080 mm Table width: 1280 mm Table height: 600 mm Dimensions: Length: 2080 mm Width: 1280 mm Height: 900 mm

Length: 0 mm Width: 0 mm Thickness: 0 mm Accuracy class: 0   Type of material: 0   Technical data Dimensions: Length: 630 mm Width: 400 mm Height: 80 mm

Length: 0 mm Width: 0 mm Thickness: 0 mm Accuracy class: 0   Type of material: 0   Technical data Table length: 1200 mm Table width: 800 mm Table height: 165 mm Dimensions: Length: 1400 mm Width: 1000 mm Height: 800 mm Various accessories: Measuring table (Marble) with support

Capacity: 30 t Bed length: 980 mm Bed width: 850 mm Stroke: 600 mm Day light: 920 mm SPECIFICATIONS Hydraulic / Mechanical   Hydraulic Press force   30 Ton Table Length x Width   980 x 850 mm Throat  920 mm Die height  920 mm Stroke Length  600 mm  

Lot of aluminum spotlights.

Spot welding guns --- Rated power at 50%ED: 25kVA Short circuit current: 22.5kA Electrode force: 600daN / double stroke Projection: 170mm --- - Electrode arm top-straight E34/25/170g - Electrode arm bottom-straight E34/8/170g --- Welding control: MPS 1036 (5 times, 1 program) --- Spring tension on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Tuschier- and test injection press make REIS type TUS 60 A 10 HMachine -No: 177/66, built in 1966Table surface: 590 x 600 mmMax. Shaped area: 600 x 1200 mmMax. Mold height: 680 mmMax. Mold weight: 2.5 tStroke of the table: 500 mmEjector stroke: 200 mmEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 0 - 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Stroke speed stepless: 0 - 80 mm / sLoad capacity of the upper swivel plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Test sprayer- Heater- ejector- swivel top plate m. hydr. locklittle usedPrice on request.Delivery: ex warehouse or location free loading tru ...

Spotting Press Fabr. REIS Type TUS 60 OK-40 HWMasch. -No: 693/73 built in 1973Press force: 40 tTable or size of the ram surface: 670 x 470 mmPassage between columns wide / long side: 620/470 mmgr. distance between clamping surface and plunger: 740 mmRam stroke: 770 mmPress speed: 20 mm / sRapid traverse: 50 mm / sOpening speed: 34 mm / sEjector force: 3 tEjector stroke: 200 mmHydraulic drive: 380 V, 9.5 kWSpace required including space for aussfahrb. Table and pestles: 2200 x 1875 x 3000 mmWeight approx: 2400 kgWith- compl. electrical device- Control panel for the electrical system and hydraulics- Test sprayerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM ...

Spotting- and test injection press make REIS type TUS 60 AMachine -No: 791, built in 1974Max. Mold area: 600 x 1000 mmMax. Mold height: 727 mmMax. Mold weight: 2500 kgEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Load capacity of the upper swing-out plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmColumn diameter: 80 mmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H approx.: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Control panel- Test sprayer- Heater- ejectorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We ...

Spotting Press Fabr. GUSTAV HESSMERT Type TSD 40Masch. -No: 125/85 built in 1985Pressing and clamping pressure: 20 - 400 kNRetraction pressure: 100 kNDischarge pressure: 5 - 40 kNOperating pressure: 200 barClosing speed: 0 - 17 mm / sec.Opening speed: 0 - 37 mm / sec.Press speed: 0 - 4.0 mm / sec.Usable table surface: 600 x 600 mmInstallation height: 600 mmRam stroke: 300 mmAustoßerhub: 150 mmDisplacement weight: 600 kgSwivel and rotary weight: 300 kgSwivel and rotation angle: 180 degr.Operating pressure: 250 barConnected load: 380/220 V, 4.0 kWWeight approx: 2,3 tWith- swivel head above- T-slot table 0.6 x 0.6 m- in 2015 renewal of the PLC control Siemens,xa0xa0 with new program recording and network connectionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors ex ...

Spotting and test spray press make REIS type TUS 60 / 0K 20Machine -No: 19137/79 Year 1979Technical specifications:Press force: 20 tRetraction force: 10 tgr. stroke: 775 mmEjector force: 3.0 tEjector travel: 200 mmOperating pressure: 175 barTable mounting surface: 570 x 670 mmDistance between columns: 620/470 mmInstallation height: 740 mmPiston diameter: 120 mmDrive power: 7.5 kWtotal installed power: 9.5 kWDimensions L x W x H: 1900 x 1200 x 3100 mmWeight approx: 2300 kgWith- Test spray device- 2 hydr. sockets- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Spot welding gun make DALEX type 3326-4Fabr. -No: 91 M 64709 Year 1991Rated power at 50% ED: 22 kVAsec. Short circuit current: 14 KAElectrode force: 280 daNArm distance: 140 mmWelding power: 3 + 3/4 + 4 mmDischarge: 600 mmWith- Control- Weight balancelittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Spot welding gun make DALEX type 3326-3Masch. -No: 1L3002 / 1 Year of construction Nov.1971Projection: 400 mmPower at 50% ED: 22 kVASec. Short-circuit current: 14 KAOutreach: 500 mmConnected load: 34.8 kVAOperating current at 50% ED: 5.4 kVAElectrode force: 280 daNWeight: 37 kgWith- Control unit type J 5 WS 4used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Spot welding gun make ARO type P 295 AWMachine -No: 00224/79 with control unitPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Item No. 5054: 1 gebr. Ink press 250 kN Fabr. MILLUTENSIL,

Spot welding machine make KUKA type K 15 / PFactory no. 177, built in 1972Rated power at 50% ED: 15 kVAElectrode force of: 50 - 200 kpNominal primary voltage and frequency: 380 V, 50 HzDischarge: 320 mmConnected load: 32 kVAOpen circuit voltage: 1.7 - 3.0 VOperating current at 50% ED: 5 kASecondary short-circuit current: 18 kAusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Spot welding machine make MEGATRONIC type TBN 20/400Fabr. -No: 210/88, built in 1988Electrode force: 120 - 300 daNWelding power: 20 kVAPrimary voltage: 19 kVAProjection: 400 mmRated current: 5.7 kAsec. Short-circuit current: 9 kA:Leelaufspannung: 1.4 - 3.5 V in 4 stagesVoltage: 380VExternal dimensions L x W x H: 950 x 350 x 1600 mmWith:- Control type RÖ 533 b KusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools