spiral used for sale

Wendelmixer Diosna W160 - maschine for 160 dough - two bowls - maschine bakery condition

Used spiral mixer KEMPER, type: ECO 50 -In bakery condition- - for 50 kg flour or 80 kg dough - 2 Time clocks - 2 speeds - Dust cover with opening flap - Stainless steel spiral and boiler - With center rod for less heat generation - Emergency stop switch - El. Connection: 400 V, 50 Hz, 3Ph, 11.7 A The machine is in good condition and ready for immediate use. Visits and test runs are possible by arrangement.

-with 2 stainless steel kettles -per kettle for max. 240kg dough or for amx. 150 kg flour -2 speeds slow and fast -with flour dust cover -Machine completely repainted

max. wheel diameter: 275 mm max. module: 6 min. module: 1,5 Control: SINUMERIK 840 C tooth width: 5,5 mm spiral angle: min. 0 / max. 60 ° max. number of teeth: 120 min. number of teeth: 5 ratio of transmission: 1:10 min. ratio of transmission: 1:1 work piece spindle speed: max. 110 U/min blade head turning speeds: 20 - 110 U/min total power requirement: 100 kW weight of the machine ca.: 16,7 t dimensions of the machine ca.: 5,20 x 2,30 x 2,40 m Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used spiral rather with 5 extendable tank cars SAN CASSIANO, type: 2003 -In good condition- - for 250 kg (at 65% water content) - With 5 extendable tank cars - Control on the machine on the left - El. Connection: 400 V, 50 Hz, 30 A - Net weight: 1,355 kg - Condition: Good, regular maintenance - Ready for immediate use Visits and test runs are possible by arrangement.

3 Erka kneading machines with 6 tank cars are offered on order. The machines are located in the Frankfurt area.

Spiral dough mixer, fixed bowl, 160 kg dough Auction-ID: A7-49776-4

It is a reconditioned Diosna spiral mixer SP 120 D (for max. 120kg dough / 75kg flour) for sale. The spiral mixer is in very good condition and runs quietly. The machine has a stainless steel bowl, a stainless steel spiral, is mobile, has 2 timers and 2 speeds. A video can be sent on request. Price on request.

Spiral dough mixer, fixed bowl, 160 kg dough Auction-ID: A7-49776-3

Apollo SPC 1500-400-A4-2T Spiral Conveyor (2014) 1500 mm diameter, 400 mm belt, 2-tier spiral conveyor designed for 24/7 vertical transport. It supports up to 50 kg loads, 60 m/min belt speed Auction-ID: A1-48805-69

Sortimat feeding system – spiral conveyor system with bunker feed Manufacturer: Sortimat Year of construction: according to type plates approx. 2009/2010 Condition: used, complete body, optically dirty, dismantled from ongoing production Plant consisting of: 1. Spiral conveyor (large) Stainless steel oscillating cup With sorting strips and separation segments Pneumatic blow-out and rejection stations Noise insulation integrated in the housing2. Two spiral conveyors (small) Diameter: approx. 15–20 cm For smaller bulk materials / pins Finely adjustable separation mechanism 3. Linear conveyors / rail conveyors Several linear conveyors for orderly transfer Stainless steel troughs, vibration-controlled Mechanically complete, optically used 4. Three bunkers / hoppers (feed containers) Stainless steel bunker for automatic feeding of the spiral conveyors Vibration-controlled 5. Control Box ...

Used spiral mixer DIOSNA, type: SP 160 D -In good bakery condition- - Stainless steel frame, spiral and boiler - up to 160 kg dough / approx. 100 kg flour - 2 forward gears / speeds - 1 reverse gear - 2 timers - Automatic transition from gear 1 to gear 2 - Emergency stop - Condition: Technically very good, runs very smoothly - Ready for immediate use - Video can be sent The mixer is in good used condition and is immediately ready for use. Inspection and test run are possible by arrangement.

Sortimat Spiral Conveyor / Feeding System Manufacturer: Sortimat Technology GmbH & Co.Machine No.: 0000F20756 / 0000F20759 Year of Construction: 2010 Condition: Used, functional from ongoing production, visually with signs of use Complete Sortimat spiral conveyor with stainless steel bowl (Ø 40 cm) Linear conveyor (rail) with adjustable feed intensity Base frame made of stable steel frame Control units Sortimat (frequency controller for pot and Rail) Various pneumatic and sensor cables available Completely assembled feed line with several guides Technical data: Type spiral conveyor (pot): n.b.Type linear conveyor / rail: Sortimat SML 40/300 Diameter spiral conveyor: approx. 39–40 cm Width of sorting magazine / rail: approx. 80 cm Total length of system: approx. 120 cm Total width of system: approx. 70 cm Total height of system: approx. 160 cm Electrical connection: Spiral Conve ...

Assembly or joining station of the manufacturer VTS Verbindungstechnische Service OHG Manufacturer: VTS Verbindungstechnische Service OHG Year of construction: 2020 Serial No.: 80.580.20 Type: 80-4/100.6 Main components (according to nameplates): TOX Pressotechnik Hydraulic unit Type: KVE 04.15.100.06 Max. pressure: 10 bar MAFU Spiral conveyor Type: SMB 150 Year of construction: 07/2019 MAEDLER GmbH Geared motor Type: E040B 1300/00 Ratio: 19:1 Control and control unit MAFU D-775 Pneumatic and mechanical guide units Condition: Used, removed from ongoing production. Scope of delivery: Assembly system as shown, including attached components and control. No other accessories or documentation included. Technical data: Size: approx.: 700 x 500 x 1400 mm (WxDxH) Auction-ID: A7-49816-59

Sorting and feeding system Sortimat Manufacturer: Sortimat Technology GmbH & Co. Year of construction: 09/2010 Condition: used, functionally stored, technically complete, clear signs of wear System consisting of: 1. Large sorting/spiral conveyor pot (stainless steel) Diameter approx. 40 cm Multi-stage spiral conveyor Pneumatic separation units installed Sensors and air nozzles available Oscillating drive Sortimat / RNA design Acoustic insulation inside complete 3. Small parts sorting pot (third pot) Diameter approx. 14–16 cm Fine parts processing (e.g. pins, clips, contact parts) Precisely adjustable bunker feed and sensors 4. Linear sections / transfer units Several linear conveyors with stainless steel guides 5. Stainless steel bunker / parts storage Large stainless steel filling trough (\"bunker\") Dimensions approx. 30 × 20 cm 6. Control units Sortimat control units type SMS  ...

Feeding system with bunker, spiral conveyor + linear section Manufacturer: Rhein-Nadel Automation GmbH (RNA) Type: MB-Type13 Serial number: 10165609 Year of construction: 2014 RNA BVL-25 (bunker) – year 2015 Storage container Permissible load: 25 kg Automatically supplies spiral conveyor with material RNA SRC-N 400-2R (spiral conveyor / vibratory spiral) – year of manufacture 2015 Sorts and orients parts Vibration frequency: 100 Hz / 6000 min⁻¹ 200 V, 4.26 A, 852 VA RNA SLL400-800 (Linear oscillator / linear section) – Year 2014 Linear transport of the sorted parts 200 V, 0.6 A, 120 VA Vibration frequency: 100 Hz / 6000 min⁻¹ MB-Type13 Main system (feeding system compact module) – Year 2014 Frame, control cabinet, operation Multiple control 3x control units (21A0 / A1 / A2) Technical data: Dimensions: 2.10 × 1.00 × 1.35 m Auction-ID: A7-49816-13

Sorting and feeding system Sortimat Manufacturer: Sortimat Technology GmbH & Co.Machine no.: L000F20754 Year of construction: 08/2010 Protection class: IP54 Voltage: 200 V / 50 Hz Power control: Sortimat control units type spiral conveyor and rail (each infinitely variable 1–10) External bunker: DasFröhlichBand – year of construction 07/2010, serial no. 6144 System comes from industrial series production Optically used, fully functional at the time of expansionComplete electrical and pneumatic wiring available No missing modules recognizable Technical data: Large-dimensioned spiral conveyor / vibratory spiral Ø approx. 95–100 cm (measured approx. 90–102 cm depending on inner/outer ring) Stainless steel inlet chute Extensive linear conveyor sections with adjustment units Pneumatic separation / cycle mechanism Three separate Sortimat control units for fine dosing Machine  ...

Sorting and feeding station with double spiral conveyors Complete feeding and sorting station consisting of two spiral conveyors (Sortimat), each with stainless steel bunker attachment, internal insulation and a downstream separation and transfer system. The system was used in an industrial assembly line for parts feeding. The unit stands on a stable steel frame (painted blue). Each spiral conveyor has its own control units (Sortimat), consisting of: Bunker controller Spiral conveyor controller Rail/vibrator regulator All controllers are individually adjustable. Technical data: Length: approx. 210 cm Width: approx. 180 cm Total height: approx. 145 cm Auction-ID: A7-49816-29

Sorting and feeding system with spiral conveyors & bunker feeding Manufacturer: Sortimat Technology GmbH & Co. Year of construction: 08/2010 Condition: used, functional (dismantling condition), contaminated by operation Complete, industrial sorting and feeding unit consisting of a large Sortimat spiral conveyor, additional small spiral conveyor, pneumatic separations, sensors and a large stainless steel bunker feeder. The system was last operated for the feeding of screws or small metal parts. The machine stands on a robust steel frame and has all control units (Sortimat/Red Revoplus) mounted. Technical data: 1. Sortimat spiral conveyor (large) Machine no.: L00F20761 Year of construction: 08/2010 Diameter approx. 340 mm Completely enclosed housing With stainless steel bunker (large feeding trough) Sound insulation inside 2. Sortimat spiral conveyor (small) Diameter approx. 30 ...

Jürgen Jahn Sorting & Feeding System (year of construction 01/2020) Manufacturer: Jürgen Jahn Sorting and Feeding Technology GmbH Year of construction of all components: 01/2020 Serial number: 19/002.2 Condition: Used, functional, dismantled from ongoing production Area of application: Separation, sorting and feeding of small metallic parts (\"discs\") to assembly or testing processes. Consisting of: Linear feeder LFJ 3/550 Vibratory spiral conveyor SGJ 300 Vibratory bunker VBJ 5/40 Complete aluminium protective housing Sensors, separation section, control units (3×) Technical data: Year of construction: 01/2020 Voltages: 230 V Control units: 3× Digital control (Jahn) Spiral size: approx. 300 mm Linear length: 550 mm Bunker volume: 40 L Weight: approx. 220 kg Application: Screws, washers, stamped parts, small parts Protective housing & frame – Aluminium profile frame  ...

stainless steel tub; stainless steel spiral; stainless steel safety grille; bowl diameter inside 750 mm; bowl depth approximately 400 mm; 2x timer; Auction-ID: A1-49547-13

stainless steel tub; inner dimensions of the tub diameter 600 mm; bowl depth 350 mm; stainless steel kneading hook; 5.25 kW; including Delfin dust extraction motor including flexible hose to first coupling; Auction-ID: A1-49547-2

stainless steel tub; inner dimensions of the tub diameter 600 mm; bowl depth 350 mm; stainless steel kneading hook; 5.25 kW; Auction-ID: A1-49547-3

Pot diameter : 1200 mm Filling height variable: 1.80 – 2.20 m Suitable for shaft lengths up to 400 mm

stainless steel tub; stainless steel spiral; steel safety grating; bowl diameter inside 430 mm; bowl depth approx. 330 mm; 2x timer; Auction-ID: A1-49547-21

Spiral mixer/dough machine with dust cover with 2 speeds with digital control with pliers lock with friction edge drive extendable with 2 tank cars for approx. 120kg dough

Diosna Hub Kneader Type: D 200 a Plus Technical data: with 2 stainless steel boilers Stainless Steel Lifting Arm - Welded extendable with flour dust cover Wear parts renewed once repainted Traces of storage

Kettle / vat for Kemper F 200 ASL Lifting Kneader Machines Bearing renewed / repainted Boiler has a blow / rebalancing Sale thus only as defective

Kemper Lifting kneader extendable Type: F 200 ASL 2 speeds 2 stainless steel kettles Stainless steel lifting arm with flour dust cover 2x timers 2x speeds for max. 320kg dough Wear parts renewed and repainted Without sealing lid of the boiler

External electrical connection box and an additional mixing tub Auction-ID: A1-48986-7

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

Boku Spiral Mixer Type: SK 240 AK Technical data: Extendable spiral mixer for max. 240 kg dough with automatic timers digital display 2 speeds slow and fast Stainless steel spiral with 2 stainless steel boilers with flour dust cover Wear parts renewed and repainted

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

max. wheel diameter:275 mm gear width: mm max. module: weight of the machine ca.:9,4 t dimensions of the machine ca.:3,7 x 3 x 2,82 m min. number of teeth:5 max. number of teeth:2000 range of tooth size:20 mm max. gear width (internal machining):58 mm X-axis:325 mm y-axis:350 mm Z-axis:475 mm Bevel gear milling machine Gleason Pfauter including Promot Automation

Turatti Streamer Compact is engineered to produce spiral and noodle-style cuts from vegetables such as zucchini, carrots, and similar produce. Raw material is positioned through a centering device before reaching the rotating cutting head, ensuring stable alignment and full utilization of the product. The system is designed for continuous-duty operation without batch interruption