134,904 used machines on RESALE, but how to find them? Machine Search
3 Erka kneading machines with 6 tank cars are offered on order. The machines are located in the Frankfurt area.
Apollo SPC 1500-400-A4-2T Spiral Conveyor (2014) 1500 mm diameter, 400 mm belt, 2-tier spiral conveyor designed for 24/7 vertical transport. It supports up to 50 kg loads, 60 m/min belt speed Auction-ID: A1-48805-69
Sortimat feeding system – spiral conveyor system with bunker feed Manufacturer: Sortimat Year of construction: according to type plates approx. 2009/2010 Condition: used, complete body, optically dirty, dismantled from ongoing production Plant consisting of: 1. Spiral conveyor (large) Stainless steel oscillating cup With sorting strips and separation segments Pneumatic blow-out and rejection stations Noise insulation integrated in the housing2. Two spiral conveyors (small) Diameter: approx. 15–20 cm For smaller bulk materials / pins Finely adjustable separation mechanism 3. Linear conveyors / rail conveyors Several linear conveyors for orderly transfer Stainless steel troughs, vibration-controlled Mechanically complete, optically used 4. Three bunkers / hoppers (feed containers) Stainless steel bunker for automatic feeding of the spiral conveyors Vibration-controlled 5. Control Box ...
Sortimat Spiral Conveyor / Feeding System Manufacturer: Sortimat Technology GmbH & Co.Machine No.: 0000F20756 / 0000F20759 Year of Construction: 2010 Condition: Used, functional from ongoing production, visually with signs of use Complete Sortimat spiral conveyor with stainless steel bowl (Ø 40 cm) Linear conveyor (rail) with adjustable feed intensity Base frame made of stable steel frame Control units Sortimat (frequency controller for pot and Rail) Various pneumatic and sensor cables available Completely assembled feed line with several guides Technical data: Type spiral conveyor (pot): n.b.Type linear conveyor / rail: Sortimat SML 40/300 Diameter spiral conveyor: approx. 39–40 cm Width of sorting magazine / rail: approx. 80 cm Total length of system: approx. 120 cm Total width of system: approx. 70 cm Total height of system: approx. 160 cm Electrical connection: Spiral Conve ...
Assembly or joining station of the manufacturer VTS Verbindungstechnische Service OHG Manufacturer: VTS Verbindungstechnische Service OHG Year of construction: 2020 Serial No.: 80.580.20 Type: 80-4/100.6 Main components (according to nameplates): TOX Pressotechnik Hydraulic unit Type: KVE 04.15.100.06 Max. pressure: 10 bar MAFU Spiral conveyor Type: SMB 150 Year of construction: 07/2019 MAEDLER GmbH Geared motor Type: E040B 1300/00 Ratio: 19:1 Control and control unit MAFU D-775 Pneumatic and mechanical guide units Condition: Used, removed from ongoing production. Scope of delivery: Assembly system as shown, including attached components and control. No other accessories or documentation included. Technical data: Size: approx.: 700 x 500 x 1400 mm (WxDxH) Auction-ID: A7-49816-59
Sorting and feeding system Sortimat Manufacturer: Sortimat Technology GmbH & Co. Year of construction: 09/2010 Condition: used, functionally stored, technically complete, clear signs of wear System consisting of: 1. Large sorting/spiral conveyor pot (stainless steel) Diameter approx. 40 cm Multi-stage spiral conveyor Pneumatic separation units installed Sensors and air nozzles available Oscillating drive Sortimat / RNA design Acoustic insulation inside complete 3. Small parts sorting pot (third pot) Diameter approx. 14–16 cm Fine parts processing (e.g. pins, clips, contact parts) Precisely adjustable bunker feed and sensors 4. Linear sections / transfer units Several linear conveyors with stainless steel guides 5. Stainless steel bunker / parts storage Large stainless steel filling trough (\"bunker\") Dimensions approx. 30 × 20 cm 6. Control units Sortimat control units type SMS ...
Sorting and feeding station with double spiral conveyors Complete feeding and sorting station consisting of two spiral conveyors (Sortimat), each with stainless steel bunker attachment, internal insulation and a downstream separation and transfer system. The system was used in an industrial assembly line for parts feeding. The unit stands on a stable steel frame (painted blue). Each spiral conveyor has its own control units (Sortimat), consisting of: Bunker controller Spiral conveyor controller Rail/vibrator regulator All controllers are individually adjustable. Technical data: Length: approx. 210 cm Width: approx. 180 cm Total height: approx. 145 cm Auction-ID: A7-49816-29
Feeding system with bunker, spiral conveyor + linear section Manufacturer: Rhein-Nadel Automation GmbH (RNA) Type: MB-Type13 Serial number: 10165609 Year of construction: 2014 RNA BVL-25 (bunker) – year 2015 Storage container Permissible load: 25 kg Automatically supplies spiral conveyor with material RNA SRC-N 400-2R (spiral conveyor / vibratory spiral) – year of manufacture 2015 Sorts and orients parts Vibration frequency: 100 Hz / 6000 min⁻¹ 200 V, 4.26 A, 852 VA RNA SLL400-800 (Linear oscillator / linear section) – Year 2014 Linear transport of the sorted parts 200 V, 0.6 A, 120 VA Vibration frequency: 100 Hz / 6000 min⁻¹ MB-Type13 Main system (feeding system compact module) – Year 2014 Frame, control cabinet, operation Multiple control 3x control units (21A0 / A1 / A2) Technical data: Dimensions: 2.10 × 1.00 × 1.35 m Auction-ID: A7-49816-13
Sorting and feeding system Sortimat Manufacturer: Sortimat Technology GmbH & Co.Machine no.: L000F20754 Year of construction: 08/2010 Protection class: IP54 Voltage: 200 V / 50 Hz Power control: Sortimat control units type spiral conveyor and rail (each infinitely variable 1–10) External bunker: DasFröhlichBand – year of construction 07/2010, serial no. 6144 System comes from industrial series production Optically used, fully functional at the time of expansionComplete electrical and pneumatic wiring available No missing modules recognizable Technical data: Large-dimensioned spiral conveyor / vibratory spiral Ø approx. 95–100 cm (measured approx. 90–102 cm depending on inner/outer ring) Stainless steel inlet chute Extensive linear conveyor sections with adjustment units Pneumatic separation / cycle mechanism Three separate Sortimat control units for fine dosing Machine ...
Sorting and feeding system with spiral conveyors & bunker feeding Manufacturer: Sortimat Technology GmbH & Co. Year of construction: 08/2010 Condition: used, functional (dismantling condition), contaminated by operation Complete, industrial sorting and feeding unit consisting of a large Sortimat spiral conveyor, additional small spiral conveyor, pneumatic separations, sensors and a large stainless steel bunker feeder. The system was last operated for the feeding of screws or small metal parts. The machine stands on a robust steel frame and has all control units (Sortimat/Red Revoplus) mounted. Technical data: 1. Sortimat spiral conveyor (large) Machine no.: L00F20761 Year of construction: 08/2010 Diameter approx. 340 mm Completely enclosed housing With stainless steel bunker (large feeding trough) Sound insulation inside 2. Sortimat spiral conveyor (small) Diameter approx. 30 ...
Jürgen Jahn Sorting & Feeding System (year of construction 01/2020) Manufacturer: Jürgen Jahn Sorting and Feeding Technology GmbH Year of construction of all components: 01/2020 Serial number: 19/002.2 Condition: Used, functional, dismantled from ongoing production Area of application: Separation, sorting and feeding of small metallic parts (\"discs\") to assembly or testing processes. Consisting of: Linear feeder LFJ 3/550 Vibratory spiral conveyor SGJ 300 Vibratory bunker VBJ 5/40 Complete aluminium protective housing Sensors, separation section, control units (3×) Technical data: Year of construction: 01/2020 Voltages: 230 V Control units: 3× Digital control (Jahn) Spiral size: approx. 300 mm Linear length: 550 mm Bunker volume: 40 L Weight: approx. 220 kg Application: Screws, washers, stamped parts, small parts Protective housing & frame – Aluminium profile frame ...
stainless steel tub; stainless steel spiral; stainless steel safety grille; bowl diameter inside 750 mm; bowl depth approximately 400 mm; 2x timer; Auction-ID: A1-49547-13
stainless steel tub; inner dimensions of the tub diameter 600 mm; bowl depth 350 mm; stainless steel kneading hook; 5.25 kW; including Delfin dust extraction motor including flexible hose to first coupling; Auction-ID: A1-49547-2
stainless steel tub; inner dimensions of the tub diameter 600 mm; bowl depth 350 mm; stainless steel kneading hook; 5.25 kW; Auction-ID: A1-49547-3
Pot diameter : 1200 mm Filling height variable: 1.80 – 2.20 m Suitable for shaft lengths up to 400 mm
stainless steel tub; stainless steel spiral; steel safety grating; bowl diameter inside 430 mm; bowl depth approx. 330 mm; 2x timer; Auction-ID: A1-49547-21
Diosna Hub Kneader Type: D 200 a Plus Technical data: with 2 stainless steel boilers Stainless Steel Lifting Arm - Welded extendable with flour dust cover Wear parts renewed once repainted Traces of storage
Kettle / vat for Kemper F 200 ASL Lifting Kneader Machines Bearing renewed / repainted Boiler has a blow / rebalancing Sale thus only as defective
Kemper Lifting kneader extendable Type: F 200 ASL 2 speeds 2 stainless steel kettles Stainless steel lifting arm with flour dust cover 2x timers 2x speeds for max. 320kg dough Wear parts renewed and repainted Without sealing lid of the boiler
Boku Spiral Mixer Type: SK 240 AK Technical data: Extendable spiral mixer for max. 240 kg dough with automatic timers digital display 2 speeds slow and fast Stainless steel spiral with 2 stainless steel boilers with flour dust cover Wear parts renewed and repainted
External electrical connection box and an additional mixing tub Auction-ID: A1-48986-7
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...
max. wheel diameter:275 mm gear width: mm max. module: weight of the machine ca.:9,4 t dimensions of the machine ca.:3,7 x 3 x 2,82 m min. number of teeth:5 max. number of teeth:2000 range of tooth size:20 mm max. gear width (internal machining):58 mm X-axis:325 mm y-axis:350 mm Z-axis:475 mm Bevel gear milling machine Gleason Pfauter including Promot Automation
Type: HM 200, high-performance mixer, partly in VA, Y:00, 1987, 6.5 / 9.5kW, 2 knife heads, control cabinet, completely on base frame, drives can be polum-switched.
Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.
Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.
Farrel Pomini Model OOC Lab Banbury Internal Mixer machine number: 7511, Year: 1976 Net Volume: 4.24 Litres pneumatic hopper 30kW DC variable speed motor. Complete with control panel etc and in very good condition.
used
1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).
Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).
Material: stainless steel Engine: 7,5 kW Convey length: 2850 mm Convey width: 500 mm Very good condition. You can also get the entire system with all components.
1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5007, Year July 1998, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with David Brown unidrive gearbox, serial no GS50277, Leroy Somer Type LSM54 L76P 1492kW AC motor, Dec 2001, RPM 1000/1200, 750V (includes 11kv > 750v transformer). Output rpm 49.8/43. Alstom \Syncdrive\ AC variable speed drive controller, 1940 KVA, 750V, digital drive new in 2001. With Siemens S5 Control system. In feed conveyor and dust extraction system also for sale if required. Spare refurbished Leroy Somer motor also available. Complete and in good condition (still installed at a factory in UK).
Material: stainless steel Engine: 160 kW Content: 15000 ltr Weight: 11000 kg Length x Width x Height: 6300 mm x 2200 mm x 2500 mm Mechanism SDW (340kW) Flender Speed: 1500 / 63 More details on request. Very good condition. You can also get the entire system with all components you need.
Material: stainless steel (1.4541) Engine: 7.5 kW Content: 500 ltr Weight: 1000 kg Length x Width x Height: 1200 mm x 1200 mm x 3100 mm With jacket 22 rpm Very good condition. We plan and build for the complete system from used and new machinery, exactly for your needs. Are you looking for something else? Write us below!
Material: stainless steel Year of manufacture: 1980 Content: 1000 ltr Weight: 350 kg Length x Width x Height: 3800 mm x 1900 mm x 1900 mm Drive shaft: 6,8 kW, snail 0,6W; Drive snail: 80 1/min. We develop, plan and build for you the whole plant exactly for your needs from new and/or used machines. More then 1000 used machines on stock. Write us below!
Material: stainless steel Volumes: 3,000 litres new machine We build the mixer you require. Do you need a whole plant from used or new components? Write us below!
used
1 x Carter model MK3 Plus Banbury internal mixer, Serial number: 8-77, Year: Sept 1977, Chamber volume 90litre, approx batch weight: 85kgs, pneumatic hopper, S.S.A. type dust stops, Oil cooled roller bearings, hydraulic drop door + linear actuator, cored rotors with rotary joints fitted, flood cooling to body, standard bullgear drive with 150kW, 495rpm, 3ph,m 50Hz, 380/415V slip ring motor and starter. Key interlock safety system. Complete with all operator controls, pneumatics, hydraulics etc and in good condition.
1 x Farrel Banbury internal Mixer, Model 00C. Machine number: 91M7017, Year: 1992, Stainless steel jacketed swing side (drop door design). Maximum steam or water pressure 150psi, chrome plated two wing cored rotors with spherical roller bearings, gross capacity of mixing chamber 4.24 liters. 5" Diameter ram cylinder, maximum pressure 100psi. Chrome plated single slope V-bottom, stainless steel, pneumatically operated front door, F.Y.A. dust stops, oil seals, oil injector, thermocouple. With 65kw (87hp), 340/440 volt, 1500 rpm motor, reducer ratio 15:1. Unit mounted in an enclosed cabinet with a pull-out discharge drawer. Includes an operator panel. In good condition.
used
1 x Farrel Bridge model 11D Banbury internal mixer, machine number: 90R2022, Year: July 1991, Pneumatic hopper + extension neck, SSA dust seals, 2 wing rotors, Hydraulic drop door with Linear actuator, Wyco semi unidrive gearbox, with 875Kw, 440V AC variable speed motor with Alston syncdrive controls. In good condition.
Material: High-grade steel Year of manufacture: 2011 Engine: 4 kW Content: 50 ltr 1 chopper You can also get the entire system with all components.
Technical specifications Category used machines Subcategory mechanical processing of meat Type Mixer Height 2200 mm Width 1500 mm Length of 2600 mm Capacity 800 l Power supply: 400V 50 Hz 3N Full power of 18 kW The main material stainless steel, acid-proof The delivery time 2-3 weeks The type of the agitator Paddle Loading Tote bin Loader, free-standing The type of mixer Mixer open The number of twin-shaft Description Mixer company BABE provide quick and intensive mixing of the product. Presented machine has many uses and is ideally suited for mixing products of different consistency. Mixer has two paddle shafts provide homogeneous and the highest quality product. Is controlled using the control panel where we can monitor and adjust the device to our requirements. Specification: Brand: LASKA Model: ME 800 Type: rotary vane Mixer Size: 2200 x 1500 x 2600 (mm) ...
used lime-wash mixer material: Metal height: 4.00 m with engine width: 2.00 m diameter: 2.00 m connections: below, on top mixing works: yes Revideckel: yes
Vacuum stainless steel planetary mixer mixer mixer mixer mixer used, as good as new condition State. As good as new Gross volume: 140 litres Attachment (batch) size: 35 to 100 litres max. 200 kg Max pressure: Vacuum 10mbar absolute up to 1200mbar absolute Process pressure range up to max 200 mbar Max operating temperature: 80°C Mixing tool: 7.5 kW Stirring head speed: 3-40 rpm Mixing tool speed: 10-120 rpm Total connection power: 25 kW Operating voltage: 3x 400 V / 50 Hz Control voltage: 230 V / 50 Hz or 24 V DC Siemens PLC Visualisation Filling nozzle slated with pneumatically spun rotary flaps Filling snail Frequez controlled motors Level sensors hydraulic excavation with Siemens Symatic Multi Panel Touch / Siemens Simatic controller / Siemens frequency inverter with 2x mobile cylindrical exchangeable container (140 L ) with cooling jacket (20 L) made of stain ...
No.: 3164 Year of construction: 2001 Type of current. 400V vacuum pump, double jacket Electric heating adjustable Homogenizer adjustable Schauglass, perfume funnel in Rezleitung and cover etc. Mobile frame, control cabinet Dimensions: LWH = 800x1000x1650mm
Tank / plant: Used lime milk Manufacturer: Passavant Material: Steel Size: located 1.77 m Height/length: 1.00 m Volume: 240 l
Stock # U2333-1 Used carbon steel jacketed paddle type mixer by Kates (PL) type 2M1.6. Total volume 1700 l, working volume about 1600 l. Mixing chamber is designed for work on pressure up to 0.14 bar in working temperature range from 5 - 40 C. Mixer has mixing shaft with 6 paddles and two rods working close do front walls. Shaft is driven by el. motor 55 kW, 1483 rpm in Ex design, through gearbox with reduction i = 72.71, what gives working rotation of shaft up to 20.39 rpm. Mixing chamber is covered with carbon steel cooling jacket with volume 75 l. Working pressure on jacket up to 0.5 bar at temperature in range from 5 up to 40 C. Mixer has top inspection manway with bolted lid and diameter 500 mm. Central bottom discharge with pneumatically operated valve. Mixer is mounted on carbon steel supporting construction. Machine is able to work as Ex II3GcIIA T3 /ATEX. Mixer is equipped wi ...
maximum number of results exceeded
please refine your search
600 € 
