spiral dough mixer used for sale

Spiral mixer, Fabr. Diosna, SPV 200 AF/T

used spiral mixer Sveba Dahlen M 160 Premium, checked-through, 160 kg dough, 2 watches, stainless steel kettle, stainless steel spiral, year of construction 2015, 26 A, 400 V, 50 Hz, Ser.-Nr. 71/63

used spiral mixer Boku SK 160 AK extendable, overhauled, 160 kg dough per kettle, 2 timers, with 1 stainless steel kettle, if required with additional kettles for an additional 3.950€ each, stainless steel spiral, newly painted, clocks renewed, 6.9 kW, 16.5 A

used spiral mixer Boku SK 200 A extendable, overhauled, 200 kg dough per kettle, 2 timers, with 1 stainless steel kettle, if required with additional kettles for an additional 4,100€ each, stainless steel spiral, newly painted, clocks renewed, 13.3 kW, 29.8 A, 380 V

used spiral mixer Diosna SP 180 A D extendable, overhauled, for 180 kg dough per kettle, with 1 stainless steel kettle, if required with up to 2 additional kettles for an additional 2.900€ each, stainless steel spiral, Masch.-Nr. 9421-092, 380 V, 50 Hz, 21 A

Spiral mixer KEMPER, type: ST 30 -in bakery condition- - for 30 kg flour or 48 kg dough - Technical condition: good - Everything checked and cleaned - El. Connection: 380 V, 50 Hz, 3Ph, 16 A Visits and test runs are possible by arrangement.

Spiral binding machine for e.g. college notebooks, etc., Please note that the machine will not be available until October 2026.

used spiral mixer Diosna SP 200 D, overhauled, for 200 kg dough, 2 watches, stainless steel kettle, stainless steel spiral, machine no. 9915-300, electrical system renewed, repainted, new bearings, new V-belts

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, clip-on holders, 4 pieces -Recording: MK5 -Type/Sizes: see photos -Submission/Price: complete -Transport dimensions: 530/320/H60 mm -Weight: 18.4 kg

used spiral mixer Kemper ST 100 A extendable, overhauled, for 100 kg flour, 2 clocks, with 1 stainless steel boiler, if required with 1 additional boiler for an additional 4,000€, stainless steel spiral, electrics renewed, repainted, new bearings, new V-belts, Model-No. 6717788, 25 A, 380 V

Spiral mixer Sinmag SM 120 T with return Dough machine with 2 timers 2 gears, boiler left & right for min/max. 9 - 120 kg dough Flour dust hood Stainless steel boiler and spiral Machine mobile Connection 400V, 32A-CEE plug Dimensions: 750 x 1230 x 1400/1920mm, WxDxH Used machine Visit our large warehouse!

Spiral mixer Kemper SPL 125 TOP dough machine with stainless steel kettle 2 gears, 2 timers Robust technology Machine mobile Connection 400V, 32A-CEE plug Dimensions: 940 x 1320 x 1370/1850 mm WxDxH only with us DGUV V3 tested Used machine overhauled & SAB tested Visit our large bakery equipment exhibition!

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, drill bit with drill blade Ø 60.5 mm -Reamer: Type H3 52.1-65 -Recording: MK4 -Dimensions: Ø 60 x 425 mm -Weight: 2.3 kg

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, drill bit with drill blade Ø 55.2 mm -Reamer: Type H3 52.1-65 -Recording: MK5 -Dimensions: Ø 55 x 315 mm -Weight: 2.3 kg

used spiral mixer Kemper ST 75 A extendable, overhauled, for 75 kg flour, 2 clocks, with 1 stainless steel boiler, if necessary with 1 additional boiler for an additional 3,500€, stainless steel spiral, electrics renewed, repainted, new bearings, new V-belts, Model-No. 6722781, 25 A, 380 V

Spiral mixer Kemper SPL 125 Dough machine with stainless steel kettle 2 gears, 2 timers robust technology! Machine mobile Connection 400V, 32A-CEE plug Dimensions: 940 x 1320 x 1370/1850 mm WxDxH only with us DGUV V3 tested Used machine overhauled & SAB tested with warranty Visit our large exhibition!

Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex drill bits, drill bit holders -Manufacturer: Sassex, spiral drill bits, 33 pieces -Type: E16 / E17 Ø 40 to 128 mm -Submission/Price: complete -Mounting bracket: available in stock for an additional charge -Transport dimensions: 530/340/H50 mm -Weight: 15 kg

The retractable spiral mixer from Diosna type SP 240 AD has 2 retractable stainless steel boilers completely repainted for sale from stock in Bielefeld. The boilers are pulled to the machine by means of a clamp lock and lifted slightly. Automatic kneading via 2 timers (manually time adjustable) in first and second gear. After finishing kneading via the timers, the machine switches off automatically. Easy operation and cleaning of the machine. - Spiral mixer extendable - for max. 240 kg dough bzw. max. 150kg flour - 2 speeds - 2 Automatic timer - With 2 extendable stainless steel boilers - Stainless steel spiral - With pliers lock - Boiler is with friction wheel drive - Head hydraulically lifting and lowering - Tub capacity 355 liters -Machine is completely repainted -Timers are new

Wendelmixer Diosna W160 - maschine for 160 dough - two bowls - maschine bakery condition

-with 2 stainless steel kettles -per kettle for max. 240kg dough or for amx. 150 kg flour -2 speeds slow and fast -with flour dust cover -Machine completely repainted

Spiral mixer Diosna Model: SP 240 AD with 2 extendable tank cars Dough machine with manual control Connection 400V, 32A-CEE plug only DGUV V3 tested by us Used machine overhauled with warranty

Spiral mixer Diosna SP 240 AD Spiral kneader dough machine extendable Diosna Model: SP 240 AD Kneading machine for max. 240 kg dough robust technology! 2 timers and 2 gears Connection 400V, 32A-CEE plug Used machine

Used spiral rather with 5 extendable tank cars SAN CASSIANO, type: 2003 -In good condition- - for 250 kg (at 65% water content) - With 5 extendable tank cars - Control on the machine on the left - El. Connection: 400 V, 50 Hz, 30 A - Net weight: 1,355 kg - Condition: Good, regular maintenance - Ready for immediate use Visits and test runs are possible by arrangement.

max. wheel diameter: 275 mm max. module: 6 min. module: 1,5 Control: SINUMERIK 840 C tooth width: 5,5 mm spiral angle: min. 0 / max. 60 ° max. number of teeth: 120 min. number of teeth: 5 ratio of transmission: 1:10 min. ratio of transmission: 1:1 work piece spindle speed: max. 110 U/min blade head turning speeds: 20 - 110 U/min total power requirement: 100 kW weight of the machine ca.: 16,7 t dimensions of the machine ca.: 5,20 x 2,30 x 2,40 m Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3 Erka kneading machines with 6 tank cars are offered on order. The machines are located in the Frankfurt area.

Apollo SPC 1500-400-A4-2T Spiral Conveyor (2014) 1500 mm diameter, 400 mm belt, 2-tier spiral conveyor designed for 24/7 vertical transport. It supports up to 50 kg loads, 60 m/min belt speed Auction-ID: A1-48805-69

Sortimat feeding system – spiral conveyor system with bunker feed Manufacturer: Sortimat Year of construction: according to type plates approx. 2009/2010 Condition: used, complete body, optically dirty, dismantled from ongoing production Plant consisting of: 1. Spiral conveyor (large) Stainless steel oscillating cup With sorting strips and separation segments Pneumatic blow-out and rejection stations Noise insulation integrated in the housing2. Two spiral conveyors (small) Diameter: approx. 15–20 cm For smaller bulk materials / pins Finely adjustable separation mechanism 3. Linear conveyors / rail conveyors Several linear conveyors for orderly transfer Stainless steel troughs, vibration-controlled Mechanically complete, optically used 4. Three bunkers / hoppers (feed containers) Stainless steel bunker for automatic feeding of the spiral conveyors Vibration-controlled 5. Control Box ...

Sortimat Spiral Conveyor / Feeding System Manufacturer: Sortimat Technology GmbH & Co.Machine No.: 0000F20756 / 0000F20759 Year of Construction: 2010 Condition: Used, functional from ongoing production, visually with signs of use Complete Sortimat spiral conveyor with stainless steel bowl (Ø 40 cm) Linear conveyor (rail) with adjustable feed intensity Base frame made of stable steel frame Control units Sortimat (frequency controller for pot and Rail) Various pneumatic and sensor cables available Completely assembled feed line with several guides Technical data: Type spiral conveyor (pot): n.b.Type linear conveyor / rail: Sortimat SML 40/300 Diameter spiral conveyor: approx. 39–40 cm Width of sorting magazine / rail: approx. 80 cm Total length of system: approx. 120 cm Total width of system: approx. 70 cm Total height of system: approx. 160 cm Electrical connection: Spiral Conve ...

Assembly or joining station of the manufacturer VTS Verbindungstechnische Service OHG Manufacturer: VTS Verbindungstechnische Service OHG Year of construction: 2020 Serial No.: 80.580.20 Type: 80-4/100.6 Main components (according to nameplates): TOX Pressotechnik Hydraulic unit Type: KVE 04.15.100.06 Max. pressure: 10 bar MAFU Spiral conveyor Type: SMB 150 Year of construction: 07/2019 MAEDLER GmbH Geared motor Type: E040B 1300/00 Ratio: 19:1 Control and control unit MAFU D-775 Pneumatic and mechanical guide units Condition: Used, removed from ongoing production. Scope of delivery: Assembly system as shown, including attached components and control. No other accessories or documentation included. Technical data: Size: approx.: 700 x 500 x 1400 mm (WxDxH) Auction-ID: A7-49816-59

Sorting and feeding system Sortimat Manufacturer: Sortimat Technology GmbH & Co. Year of construction: 09/2010 Condition: used, functionally stored, technically complete, clear signs of wear System consisting of: 1. Large sorting/spiral conveyor pot (stainless steel) Diameter approx. 40 cm Multi-stage spiral conveyor Pneumatic separation units installed Sensors and air nozzles available Oscillating drive Sortimat / RNA design Acoustic insulation inside complete 3. Small parts sorting pot (third pot) Diameter approx. 14–16 cm Fine parts processing (e.g. pins, clips, contact parts) Precisely adjustable bunker feed and sensors 4. Linear sections / transfer units Several linear conveyors with stainless steel guides 5. Stainless steel bunker / parts storage Large stainless steel filling trough (\"bunker\") Dimensions approx. 30 × 20 cm 6. Control units Sortimat control units type SMS  ...

Feeding system with bunker, spiral conveyor + linear section Manufacturer: Rhein-Nadel Automation GmbH (RNA) Type: MB-Type13 Serial number: 10165609 Year of construction: 2014 RNA BVL-25 (bunker) – year 2015 Storage container Permissible load: 25 kg Automatically supplies spiral conveyor with material RNA SRC-N 400-2R (spiral conveyor / vibratory spiral) – year of manufacture 2015 Sorts and orients parts Vibration frequency: 100 Hz / 6000 min⁻¹ 200 V, 4.26 A, 852 VA RNA SLL400-800 (Linear oscillator / linear section) – Year 2014 Linear transport of the sorted parts 200 V, 0.6 A, 120 VA Vibration frequency: 100 Hz / 6000 min⁻¹ MB-Type13 Main system (feeding system compact module) – Year 2014 Frame, control cabinet, operation Multiple control 3x control units (21A0 / A1 / A2) Technical data: Dimensions: 2.10 × 1.00 × 1.35 m Auction-ID: A7-49816-13

Sorting and feeding system Sortimat Manufacturer: Sortimat Technology GmbH & Co.Machine no.: L000F20754 Year of construction: 08/2010 Protection class: IP54 Voltage: 200 V / 50 Hz Power control: Sortimat control units type spiral conveyor and rail (each infinitely variable 1–10) External bunker: DasFröhlichBand – year of construction 07/2010, serial no. 6144 System comes from industrial series production Optically used, fully functional at the time of expansionComplete electrical and pneumatic wiring available No missing modules recognizable Technical data: Large-dimensioned spiral conveyor / vibratory spiral Ø approx. 95–100 cm (measured approx. 90–102 cm depending on inner/outer ring) Stainless steel inlet chute Extensive linear conveyor sections with adjustment units Pneumatic separation / cycle mechanism Three separate Sortimat control units for fine dosing Machine  ...

Sorting and feeding station with double spiral conveyors Complete feeding and sorting station consisting of two spiral conveyors (Sortimat), each with stainless steel bunker attachment, internal insulation and a downstream separation and transfer system. The system was used in an industrial assembly line for parts feeding. The unit stands on a stable steel frame (painted blue). Each spiral conveyor has its own control units (Sortimat), consisting of: Bunker controller Spiral conveyor controller Rail/vibrator regulator All controllers are individually adjustable. Technical data: Length: approx. 210 cm Width: approx. 180 cm Total height: approx. 145 cm Auction-ID: A7-49816-29

Sorting and feeding system with spiral conveyors & bunker feeding Manufacturer: Sortimat Technology GmbH & Co. Year of construction: 08/2010 Condition: used, functional (dismantling condition), contaminated by operation Complete, industrial sorting and feeding unit consisting of a large Sortimat spiral conveyor, additional small spiral conveyor, pneumatic separations, sensors and a large stainless steel bunker feeder. The system was last operated for the feeding of screws or small metal parts. The machine stands on a robust steel frame and has all control units (Sortimat/Red Revoplus) mounted. Technical data: 1. Sortimat spiral conveyor (large) Machine no.: L00F20761 Year of construction: 08/2010 Diameter approx. 340 mm Completely enclosed housing With stainless steel bunker (large feeding trough) Sound insulation inside 2. Sortimat spiral conveyor (small) Diameter approx. 30 ...

Jürgen Jahn Sorting & Feeding System (year of construction 01/2020) Manufacturer: Jürgen Jahn Sorting and Feeding Technology GmbH Year of construction of all components: 01/2020 Serial number: 19/002.2 Condition: Used, functional, dismantled from ongoing production Area of application: Separation, sorting and feeding of small metallic parts (\"discs\") to assembly or testing processes. Consisting of: Linear feeder LFJ 3/550 Vibratory spiral conveyor SGJ 300 Vibratory bunker VBJ 5/40 Complete aluminium protective housing Sensors, separation section, control units (3×) Technical data: Year of construction: 01/2020 Voltages: 230 V Control units: 3× Digital control (Jahn) Spiral size: approx. 300 mm Linear length: 550 mm Bunker volume: 40 L Weight: approx. 220 kg Application: Screws, washers, stamped parts, small parts Protective housing & frame – Aluminium profile frame  ...

stainless steel tub; stainless steel spiral; stainless steel safety grille; bowl diameter inside 750 mm; bowl depth approximately 400 mm; 2x timer; Auction-ID: A1-49547-13

stainless steel tub; inner dimensions of the tub diameter 600 mm; bowl depth 350 mm; stainless steel kneading hook; 5.25 kW; including Delfin dust extraction motor including flexible hose to first coupling; Auction-ID: A1-49547-2

stainless steel tub; inner dimensions of the tub diameter 600 mm; bowl depth 350 mm; stainless steel kneading hook; 5.25 kW; Auction-ID: A1-49547-3

Pot diameter : 1200 mm Filling height variable: 1.80 – 2.20 m Suitable for shaft lengths up to 400 mm

Drill set HSS 10-piece Diameter 1.0 - 10.0 mm High Speed Steel HSS Cylinder shaft Auction-ID: A1-40897-1018

stainless steel tub; stainless steel spiral; steel safety grating; bowl diameter inside 430 mm; bowl depth approx. 330 mm; 2x timer; Auction-ID: A1-49547-21

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

max. wheel diameter:275 mm gear width: mm max. module: weight of the machine ca.:9,4 t dimensions of the machine ca.:3,7 x 3 x 2,82 m min. number of teeth:5 max. number of teeth:2000 range of tooth size:20 mm max. gear width (internal machining):58 mm X-axis:325 mm y-axis:350 mm Z-axis:475 mm Bevel gear milling machine Gleason Pfauter including Promot Automation

Type: HM 200, high-performance mixer, partly in VA, Y:00, 1987, 6.5 / 9.5kW, 2 knife heads, control cabinet, completely on base frame, drives can be polum-switched.

Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.

Farrel Pomini model F620 Banbury internal mixer, net mixing chamber volume: 710 litres Machine number 6515. Original year of manufacture: 1972, but body replaced 1998 approx batch weight at SG 1 - 533kg, 4 wing rotors, drilled sides, fully stellite welded chamber, rotors and floating weight, S.S.A. dust seals, hydraulic drop door with linear actuator, pneumatic hopper, unidrive gearbox with 2 x CEM 1475kW, 1550A, 1000V, 800/1000rpm DC variable speed motors, Drive controls included, but operator controls not available. In good condition (only used for tyre compound masterbatch). Spares available: Door top (new), hinge shaft (new), 2 x dust seals, hopper seals and bearing seals.

Farrel Pomini Model OOC Lab Banbury Internal Mixer machine number: 7511, Year: 1976 Net Volume: 4.24 Litres pneumatic hopper 30kW DC variable speed motor. Complete with control panel etc and in very good condition.

1 x Farrel model F270 Banbury internal mixer, Machine number: 98M5023, Year 1999, 270 litre capacity, 2 wing rotor design, FYH type dust seals, Hydraulic drop door with linear actuator, Process oil system, Pneumatic hopper. with semi unidrive gearbox, AC variable speed motor, 550V (includes 11kv > 550v transformer). Alstom \Syncdrive\ AC variable speed drive controller, 1265 KVA, 550V, digital drive new in 2001. With Promtec Control system (complete but PLC missing). In feed conveyor and dust extraction system also available if required (at additional cost). Spare motor also available. Complete and in good condition (still installed at a factory in UK).