spinning machine used for sale

MK2

Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m

Gebrauchte; 120l,; 1991; für schwere Kuchen - effizient. Für weitere Informationen kontaktieren Sie mich bitte. 3 Kessel enthalten

Wire stitching machine Hohner Economy 25/40; good condition; cleaned and tested; 1 stitching head; Yeast thickness max.25mm with folded clamp, 40mm with unfolded clamp; Saddle or block stitching. Wire stitcher Hohner Economy 25/40; good condition; cleaned and chekced; one head; max.stitching height 25mm on block or 40mm for saddle stitching; for block or saddle stitching.

Serial number: 22320321 Travel X-axis: approx. 500 mm Travel Y-axis: approx. 750 mm Travel Z-axis: approx. 300 mm incl. granite measuring plate Plate dimensions: 1200 x 840 mm incl. documentation, calibration ball, touch probe and hardware Reference: Schmidt - Lot 89

Manufacturer: Arburg Type: 270 C 300 - 100 Year of construction: 1999 Control: Selogica Closing type: Hydraulic Closing force: 300 kN Tie bar spacing: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Stroke volume: 70 ccm / 59 gram PS Injection pressure: 1550 bar General Engine: 7,5 kW Heating: 4.7 kW Dimensions: 3.4 m x 1.4 m x 1.6 m Weight: 2000 kg Screen text: German

With extraction; Suction line to the valve

Four-side planer with 4 planing heads •Powerful with 4 motors Hsvwvkytm Voltage 400 V / 3 / 50 Hz Motor power 17,1 kW finished workpiece width 180 mm min. finished workpiece width 25 mm finished workpiece thickness 105 mm min. finished workpiece thickness 10 mm min. length of the workpiece - for single feed 350 mm - at group feed 250 mm Number of working spindles 4 Spindle speed 6000 min-1 Spindle diameter 40 mm Cutterhead diameter 120 mm Length of horizontal spindles 190 mm Length of vertical spindles 120 mm Feed speed 6; 12 m/min Diameter of feed rollers 120 mm Length of feed table 1700 mm Distance of the feed table from the floor 920 mm Quick adjustment of the feed table and ruler 10 mm Weight 1000 kg

Coordinate grinding machine for precise grinding work in tool and mould making. Table travel: 400 x 200 mm Equipment: several grinding motors Accessories: various turbines Speed range: up to 225,000 rpm The machine is ideal for fine contouring, drilling and fitting work where high accuracy and clean surfaces are required.

Manufacturer: Arburg Type: 320 C 500 - 150 Year of production: 2000 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 498 mm x 498 mm Tool height: min 225 mm Opening distance: 350 mm Plate spacing max.: 575 mm Screw: 35 mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15 kW Heating: 4,8 kW Dimensions: 3.4 m x 1.4 m x 1.7 m Weight: 2250 kg Screen text: German Additional equipment: Machine with handling Multilift Robotinterface Core pull hydraulic: x1 Air valve: Yes Tool heater x 6 Conveyor

Key data: 600 , 172 , 40

Manufacturer: Arburg Type: 370 C 600 - 250 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 370 mm x 370 mm Plate size: 570 mm x 570 mm Tool height: min 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 40 mm Stroke volume: 188 ccm / 172 gram PS Injection pressure: 1390 bar General Motor: 11 kW Heating: 5,5 kW Dimensions: 4,2 m x 1,5 m x 1,7 Weight: 3400 kg Screen text: German

Jaw width: 125 mm Vise length: approx. 470 mm Reference: Hansmann - Lot 43

Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display;

Key data: 500 , 132 , 35

Manufacturer: Arburg Type: 320 C 500 - 250 Year of production: 2002 Control: Selogica Closing type: Hydraulic Closing force: 500 kN Tie bar spacing: 320 mm x 320 mm Plate size: 446 mm x 446 mm Tool height: min 200 mm Opening distance: 350 mm Max distance between plates: 550 mm Screw: 35 mm Stroke volume: 144 ccm / 132 gram PS Injection pressure: 1820 bar General Motor: 15 kW Heating: 6,5 kW Dimensions: 3,4 m x 1,4 m x 1,7 m Weight: 2830 kg Screen text: German Additional equipment Robot interface Core pull hydraulic: x1

X-travel: 600mm, Y-way:450mm, Z-travel: 450mm; Machine Number: 14772; Table size approx. 800x460mm; Speed max. 10000 rpm, 30-fold tool changer, Tool holder: SK40; Max. table load: 1000kg; Control: Heiden-Hain: TNC430 ; incl. tool cabinet, equipped with tool holders and tools; incl. chip conveyor

Key data: 1000 , 166 , 40

Manufacturer: Arburg Type: 420 C 1000 - 350 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 1000 kN Tie bar spacing: 420 mm x 420 mm Plate size: 570 mm x 570 mm Tool height: min. 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 30 mm Stroke volume: 106 ccm / 97 gram PS Injection pressure: 2500 bar General Motor: 22 kW Heating: 5,8 kW Dimensions: 4,3 m x 1,6 m x 1,8 m Weight: 3700 kg Screen text: German Additional equipment: Robot Interface

Incl. peripherals and documents Dismantled for transport Video available!

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it.

Used bottle washer manufacturer: Klinger / Austria Year of construction: 2000 / General overhaul in 2010 at the Klinger Austria plant Type: Euro Class 24/1/844 Capacity: approx. 10,000 bph Control: Siemens S7 Total operating hours: 17,443 hours Net weight: approx. 18,000 kg Steam heated Can be used for bottles: Volume: 200ml - 1.000ml Bottle diameter: 50 - 90 mm Bottle height: 110 - 330 mm The bottle washer has so far been used for: 330ml Longneck 500ml Longneck 330ml swing top bottle 500ml swing-top bottle

Exhibition machine, unused. • 5 speeds • With foot control • With brake motor • With emergency stop • With hydraulic roller adjustment • With special tool set Sheet thickness 4 mm Roll diameter 125 mm Projection 200 mm Total power requirement 2.2 kW Machine weight approx. 0.48 t Dimensions approx. 1.6 x 0.6 x 1.2 mm

Magazzino DANOBAT 3 mt. 15 postazioni Circa 15 aanni

Combined Trumpf Trumatic 6000 TruFlow 2000 Co2 laser Preventive maintenance is carried out on the machine by Trumpf annually. installed January 2002 working hours 55734 laser on 16875 Field of work: combined exercise 2585x1280 punch press exercise 2585x1370 laser exercise 2585x1280 Performance: maximum sheet thickness 8mm punching force 220KN active blank holder (programmable) 4,5 - 20kn maximum piece weight 200kg passage height: in punching exercise 35mm in operation of laser 22mm workable materials of laser: iron maximum thickness 8mm stainless steel maximum 4mm aluminum maximum 3mm Speed': x-axis 90m/min y-axis 60m/min simultaneous 108m/min number of trips punching 900min marking 2800min c axis punching 60rpm threading 330rpm Tools: tool places 21 with three collets rotation of all tools tool change time 1.5 -5 seconds max folding height ...

Electrostatic filter included Pull-in defective, the conversion to stepper motor (servo motor available) was planned, but not implemented.

Sewingmachine Make Müller Martini Model FK-I1-S Year 1960 Min. size 40 x 60 Max size 250 x 440 mm Stitches 1-8 Details Independend thread tensioning, cutting function

Corner circular shaping machine Foellmer M; good condition; cleaned and tested; knives for straight corner section; .max. Insert height 65mm; Corner section max.70mm; Foot switch. Corner cutter Foellmer M; good condition; cleaned and checked; knife for straight cut; max.pile hight 65mm; corner cut max.70mm; Foot switch.

Jaw width: 125 mm Reference: Hercegfi - Lot 5

Operating voltage: 220 -240 V Frequency: 50 Hz Speed: 1000 - 3800 rpm incl. various matching accessories

Package strapping machine with frame size 1600 x 400 mm, width 12 mm. Very little used, because bad buy. Location Netherlands, Sold on order.

Grinding spindle for turning steel quick-change systems for machine tools, especially for small lathes, etc. Delivery handling according to picture no. 3.

Unused

The butt welding system is equipped with a welding machine from the manufacturer Manufacturer: Castolin The device type is used Totalarc 3000 . Welding machine: ABK Castolin Type: Total Arc 3000 Max welding power: 270 A

We sell here a can sealing machine from the manufacturer Lanico, type V 10 A in a good used and functional condition. The machine runs on 400 volts, 0.55 kW, for 70 and 99 cans, workshop tested, immediately ready for use, dimensions W/D/H 50/50/157 cm, others on request.

We sell on behalf a pipe and profile bending machine of the company Knuth (type KPB 50 ). The condition is AS NEW and has a lot of accessories. Pictures to follow

Unused in original packaging

Belt sander from MAFAC ; TYPE K 100 BJ 1979 and a double sander from BOSCH, incl. replacement sanding belts

incl. high-frequency sander from the manufacturer COOPER, type: BL-2B, year of manufacture: 2006

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Variovac; Model: 4000 VA; Year of production 1997; Working with soft or hard foil; Bottom foil: +/- 560 mm (approx); Upper foil: +/- 550 mm (approx); Molding length: 420mm; Forming width: 503 mm; Molding depth: 70mm; Formats: 3.2; Length: 8600 mm; Width: 1200 mm; Height: 2000 mm; Weight: 2500 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Equipped with: adjustable drilling table

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packaging can be soft or hard. Machines intended for packing food and non-food products. Producer: VERIPACK; Model: TX 12/121; Year of production 1991; Working with soft foil; Bottom foil: +/- 415 mm (approx); Upper foil: +/- 405 mm (approx); Molding length: 395mm; Forming width: 368mm; Molding depth: 90mm; Formats: 1.2; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg - the machine is dismantled; - technical condition - good; - yes, there is original documentation, CE certificate, CE nameplate and a general list of inputs and outputs.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: R5200; Year of production 1989; Working with soft or hard foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 415 mm (approx); Molding length: 182mm; Forming width: 370 mm; Molding depth: 70mm; Formats: 3.1; Length: 5800 mm; Width: 1000 mm; Height: 1800 mm; Weight: 1400 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: CFS; Model: TIROMAT Compact 420; Year of production 2001; Working with soft foil; Bottom foil: +/- 420 mm (approx); Upper foil: +/- 410 mm (approx); Molding length: 430mm; Forming width: 380mm; Molding depth: 130 mm; Formats: 2.2; Length: 6700 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg