spindle used for sale

multi spindle bar automatic, Mori Say 8/42 - YOM 2006, CONFIGURATION, - HIRTH coupling for drum locking, - 8 front slides and 8 radial slides, - 4 Compond slides in stations 1, 2, 5, 6, - CUCCHI Pietro bar loader (2007), - Bundle for CUCCHI BLT BUNDLE bar loader (2018), - Pick-up spindle, hydraulic in pos. 8, - preparation for oil fume extraction

Gildemeister G20, 6-Spindel-Portal-Drehautomat, GILDEMEISTER 20, Maschine komplett überholt, Elektrik - neu, PLC – neu, Mechanik - generalüberholt -, Geometrieprotokoll – wie Neumaschine –, CE – Konformitätserklärung, einschl. elektrische Standardausrüstung, Grundausstattung der Maschine:, 1 Tippbetrieb zum Einrichten, 1 automatische Zentralschmiereinrichtung, 1 Kühlmitteleinrichtung einschl. Pumpe und Antrieb, Behältervolumen ca. 650 L, 1 Werkzeugspindelführungsblock, 1 Antriebsgruppe für rotierende Werkzeugspindeln einschl. Gewindeschneidgetriebe für jede Werkzeugspindelposition wahlweise:, - a) Gegenläufig zum Schnellbohren, - b) Synchronlaufend, - c) Zum Gewindeschneiden bzw. Reiben, 2 Planschlitten mit unabhängigen Planvorschub, 4 Kreuzschlitten mit unabhängigem Plan- und, (Längsvorschub als Option) + 1 Maschinen-, leuchte, 1 Paar Wechselräder für Spindeldreh ...

- neu aufgebaut, neue Elektrik in 2018, - Schnecken-Späneförderer, - Ölnebelabsaugeinrichtung, - Kühlmittelfilter, selbstreinigend, - Doppelschlitten in Lage 6 zum Abstechen und Rückseitenbearbeitung, - Polygondreh- und Gewindefräseinrichtung Lage 4, - CNC-Kreuzschlitten AUTOR in Lage 5, - Abgreifspindel, hydraulisch in Lage 6, - Transportband für Fertigteile, - Stangenlader Iemca PRA

Schütte 32 multi-spindle lathe, completely rebuilt by GWM-Tech, Fanuc AC motors, FANUC motors for threading, PLC, pick-up spindle chuck, bar loader Cucchi Pietro

Number of spindles: 6, Max bar diameter [mm]: 25, Spindle speed [rpm]: 4.250, Weight of the machine ca. [kg]: 7.150, Auto bar loader: Cucchi BLT Multi F-6

Hydraulick pickup spindle pos. 6, Clutch for threading, Auto bar loader: Pietro Cucchi

6 spindle bar automatic Gildemeister GS20, compound slide with drive in pos. 1, compound slide with drive in pos. 2, compound slide in pos. 4, compound slide in pos. 5, 4x axial spindle (pos. 1, 2, 4, 5), rotating milling device in pos. 3, pick-up spindle pos. 6, swing rear machining arm drive in pos. 3, swing rear machining arm drive in pos. 6, swarf coneveyor, worm type, set of tool holders, set of cams, Number of spindles: 6, Max bar diameter [mm]: 20, Max bar feed [mm]: 100, Spindle speed [rpm]: 214 - 5.168, Spindle motor [kW]: 11, Weight of the machine ca. [kg]: 5.000, Auto bar loader: Pietro Cucchi

Number of spindles: 6, Max bar diameter [mm]: 20, Spindle speed [rpm]: 500 - 6.000, Weight of the machine ca. [kg]: 5.000, Auto bar loader: Iemca SIR 25 P 33

- spindle drum locking by means of a triad of HIRTH-type rings, - central lubrication system, - spindle stop attachment for main spindles, - cross drill device pos. 4, - 6 indipendent frontal slides, - 4 compound slides in pos. 1, 2, 4, 5, - 2 radial slides in pos. 3, 6, - double slide in pos. 6, - pick-up spindle pos. 6, - pick-up spindle stop attachment pos. 6, - conveyor belt for finished parts, - chip conveyor, hinged belt type, - high pressure coolant system, - removable coolant fluid tank, - bar stock reel for bar length 3 m, - various camms, - various gears, Number of spindles: 6, Max bar diameter [mm]: 32, Spindle speed [rpm]: 250 - 4.250 (250 - 3.350), Spindles interaxis [mm]: 276, Max bar feed [mm]: 125, Weight of the machine ca. [kg]: 9.500

Gildemeister GM 16-6AC, 4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5, 4x indipenden feed - Pos.1; Pos.2; Pos.4; Pos.5, threading device, 1x threading spindle, pick-up spindle, broaching device, set of cams, set of collets, bar-loader Cucchi Giovanni (YOM 2004), Working hours: 13.600

- spindle drum locking by means of a triad of HIRTH-type rings, - central lubrication system, - spindle stop attachment for main spindles, - 2x spindle positioning attachment (pos. 6 + 7), - 8 indipendent frontal slides, - 4 compound slides in pos. 1, 2, 5, 6, - 4 radial slides in pos. 3, 4, 7, 8, - double slide in pos. 8, - 2x pick-up spindle (pos. 4 + 8), - 2x pick-up spindle stop attachment (pos. 4 + 8), - threading attachment, - chip conveyor, hinged belt type, - high pressure coolant system, - removable coolant fluid tank, - bar stock reel for bar length 3 m, - various camms, - various gears, - electrical preparation for auto bar loader, Number of spindles: 8, Max bar diameter [mm]: 32, Spindle speed [rpm]: 270 - 3.750 (270 - 3.200), Spindles interaxis [mm]: 360, Max bar feed [mm]: 125, Weight of the machine ca. [kg]: 11.500

Gildemeister GM20, Country of origin: Italy, Operating hours: 0, Number of spindles: 6, Max bar diameter [mm]: 20, Auto bar loader: Cucchi Giovanni alternative IMG Easy load

pressure: 25 t stroke: 250 mm table-size: 400 x 500 mm surface of ram: 200 x 500 mm weight of the machine ca.: 0,9 t dayligth: 400 mm distance between columns: 500 mm - Handspindelpresse, gebraucht Balancier, used Typ/ type: PSHZ 25/I Preßkraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgröße/ table size: 400x 500 mm Stössel/ ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Gewicht/ weight: 0,9t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sliding table saw and table milling machine Felder KF 700 S YOC 2024 Format carriage length 2500 mm Motor/Voltage 5.5 kW / 7.5 HP / 400 V Scoring Ø 120 mm X-Roll Sliding Carriage Cutting width 850 mm with digital display Electromotive height adjustment Saw blade swivel 45° manual adjustment Saw blade Ø 315 mm Motor/Voltage 5.5 kW / 7.5 HP / 400 V Cutting height max.110 mm Table milling machine motor 5.5 kW Spindle tiltable 0-45° Left/right rotation selectable Speed 3500 / 6500 / 8000 / 10 000 rpm Max tool diameter 230 mm Spindle diameter 30 mm Total weight approx. 700 kg

Martin T25 Swivel spindle milling machine with 5 axis control Brand: Martin Type: T25 M-No.: V252368 Year of Make: 1998 Engine power: 7.5/9.5 kW or 10/13 hp, 2 speeds Dalander engine Swivel milling spindle: -5° to +45° Milling mandrel: ø30 mm Spindle mount: ISO quick-change system with 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Table size: Table extension 2,400 mm and table widening (=extendable support) Control panel: CNC control at eye level with LCD screen Spindle height CNC-controlled electromotive spindle height adjustment (program controlled or manual control) Tilt -5° - +45° CNC-controlled electromotive angle adjustment (program controlled or manual control) Stops: CNC-controlled electromotive adjustment of the two stops in relation to the milling mandrel (program controlled or manual control) CNC-controlled electr ...

Key data: 3 mm, 10 kW, 30 mm

Martin T26 Swivel milling machine with axes, digital display and speed control of the 7.5 kW spindle Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V415216 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Motor: 7.5 kW, 10 hp - 220 V with frequency-controlled speed Milling spindle: ø50 mm spindle met SK40 en Dornfix quick-change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change Millin ...

Key data: 1 mm, 10 kW, 30 mm

Martin T26 Swivel milling machine with axis digital display and 7.5/9.5 kW-2 speed spindle Brand: Martin Type: T26 M-No.: 2005 Year of Make: V453599 Control: Electrical adjustment & digital readout; Spindle height & inclination. Control panel: Machine stand Motor: 7.5/9.5 kW, with 2 levels of speed adjustment Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° electrically adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Electro-pneumatic spindle locking mechanism for tool change Milling spindle lubrication with long-term grease via central lubrication Speeds: 7.5/9.5 kW - 2 levels speed control Cone of the milling spindle: SK-40 with mandrel fix quick-change system Table size: Cast iron table  ...

Key data: 3 mm, 8 kW, 30 mm

Martin T26 Swivel milling machine with axes Digital display and speed control of the 7.5 kW spindle, tenon table Brand: Martin Type: T26 with frequency control M-No.: 20000 Year of manufacture: V409217 YouTube: Control: Electrical adjustment digital readout; Spindle height & inclination, jaw stops-chip removal, electrical adjustment of feed device height Control panel: At eye level, swivel Engine: 7.5 kW, 10 hp with frequency-controlled speed Milling spindle: ø40 mm spindle with SK40 en mandrel quick change system Milling mandrel: -45 to + 45° CNC or electrically manually adjustable with rapid traverse and creep traverse Spindle height positioning: 150 mm electrically adjustable with rapid traverse and creep traverse and digital display Calibration device: For exact 0 positioning of the milling spindle Electro-pneumatic spindle locking mechanism for tool change  ...

Key data: 3 mm, 6 kW, 30 mm

Martin T 26 Swivel Drums with 4-Axis CNC Control Brand: Martin Type: T26 CNC M-No.: 2002 Year of Make: V432822 Control: 4-as CNC besturing; Hoog-Laag, Tilt, Table Ring Positie, Frees Aanslag Control panel: Op ooghoogte en draaibaar Remark: Special colour scheme Martin 75 years old Ral 7035 & 6004 Engine power: 7.5/9.5 kW , 6.8/8.2 PK with 2 toeren motor (verdere toerentallen door riem omleggen) Swivel milling spindle: -45 tot + 45° Milling mandrel: ø40 mm freesspil met SK40 en Dornfix-snelwisselsysteem Height adjustment milling spindle: Electric hoogteverstelling van de freesspil 150mm met snel- en kruipgang schakelaar IJk-apparaat voor de hoogte instelling van het gereedschap Elektro-pneumatische vergrendeling van de frees-spil d.m.v. keuzeschakelaar Freesspil-smering met duurzaam vet vanaf centraal smeerpunt Speeds: 2 toerenmotor 3000-6000 tpm en 4.500-9000 ...

Key data: 3 mm, 10 kW, 3 mm

MARTIN T27 FLEX with CNC 4-axis control, electric height adjustment of the feed T27FX/1-a Swivel spindle milling machine T27 FleX in CE version with infinitely variable speed control T2704-a Stepless speed control with 9.5 kW motor. (13 hp) 1,000 – 12,000 rpm, incl. T2711-A Digital Display Insertion Stop in Control T2712-a electric motor. Positioning of the milling fence T2714-a electric motor. Positioning table opening for WZ Ø70-250 T2715-a electric motor. Positioning Feed Support T2731-a Table extension on both sides + pull-out workpiece support T2745-A Swing Away Device Milling Fence T2770_85-a milling mandrel with HSK 85 mount and PowerLock (compatible with Weinig PowerLock) T2773-a Milling mandrel HSK 85 Power Lock ø.. Mm

Key data: 2 mm, 8 kW, 40 mm

Panhans 245 Easy Swivel Spindle Milling Machine Brand: Panhans Type: T26 CNC M-No.: 245 Easy Year of Make: 2008 Control: 2-axis electric control, spindle height and inclination, 2-fold handwheel adjustment with digital readout stops together and right stop in offset Control panel: Eye level, Rotatable Motor power: 7.5 kW Swivel milling spindle: -45 tot + 45° Milling mandrel: ø40 mm with SK40 and mandrel fix quick coupler Height adjustment milling spindle: Electric height adjustment with fast and creep gear Adjustment range 150 mm Electro-pneumatic milling spindle locking mechanism Central lubrication with long-lasting grease Speed: Frequency controlled, with digital display, automatic brake, central lubrication Spindle holder: Mandrel snelwisselsysteem (pneumatic locking) Table size: Table widening on both sides, 2405mm with extendable support front Axis  ...

Key data: 1000 mm, 40 mm

SPECIFICATIONS: Spindle: Ø 40 mm Table size: 1000 x 1100 mm Installed power: 7.5 HP Electronic height/tilt adjustment

SPECIFICATIONS: Table size: 2400 x 900 mm Extendable table 1 4-roller drive (with variator) Installed power: 5 kW Lockers Ø 35 mm Motorized spindle tilt +/- 45° Motorized height adjustment Dornfix clamping system

Chevalier FSG-618M Worklength with magnetic table: 457 mm Grindingwidth: 152 mm Dimensions of the table: 460 x 150 mm Distance between table -- spindlecentre: 450 mm Max dia grindingstone: Ø 205 × 12.7 × Ø31.75 mm Spindlespeeds: 2850 rpm Motorpower: 1,5 kW Length: 1900 mm Depth: 1400 mm Height: 2130 mm Weight: 674 kg

CNC controller: FANUC FS-31iA5 (MAPPS 4) Capacity X-axis travel mm: 685 Y-axis travel mm: 125 Z-axis travel mm: 1075 Turning length mm: 1045 Max. turning diameter mm: ø: 600 Bar work capacity mm: 65 Turn-mill spindle Full indexing specifications: YES B-axis degree: 120º FULL INDEXING SPECIFICATION Speed spindle rpm: 12000 Drive power kW: 18.5/11 Tool magazine Magazine places: 80 Tool holder: CAPTO C5 Tool length max. mm: 250 Tool diameter max. mm: 70/130 Tool weight max kg: 5 Lower turret Number of tool slots St .: 12 Drive power driven tools kW: 5.5/3.7 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 25/22 (100%/40%ED) Spindle bore mm: 73 Chuck type: HOLLOW CHUCK (8") Manufacturer: KITAGAWA Counter spindle Speed spindle rpm: 5000 Drive power spindle kW: 25/22 (100%/40%ED) Spindle bore mm: 73 Chuck type: HOLLO ...

Spindle moulder with tilting shaft SCM mod. T110I - CE -Volt. 400/50 - Matr. AB/118120 - Year 1998

X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for ...

SUB: FOR SALE... CHRIS MARINE VALF SPINDLE GRINDING MACHINE AT TURKEY HAVE A GDY SIR WE VE 1 PC USED CHRIS MARINE VALF SPINDLE GRINDING MACHINE AT TURKEY TYPE BSP-2 NO. 463/204 DATA 3X 440V 60HZ IT WAS USED VERY LESS HOURS IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

Ball screw with servo motor SIEMENSLinear guide with permanent servo motor SIEMENSTyp: 1FK6044-7AH71-1EG0Ident No. YF RN22 5076 01 001Year of construction: 2003Axle movement: 540 mmTotal length: 900 mmShaft diameter: 40 mmThread pitch: 40 mmBall diameter: approx. 6 mm- Compact unit with servo motor and spindle nut- Ball screw guided in a torsion-proof manner, drive via nut- Ball screw 40 mm (hollow shaft, inner diameter = approx. 22mm)- Permanent servo motor SIEMENS type: 1FK6044-7AH71-1EG0 (Serial No.: Ident No. YF RN22 5076

Drive motor, DC servo motor LENZE type GFQUBT 112-22Spindle motor, electric motorSeries No. 0239398K Year of manufacture: 1993Nominal power: 6 kWook voltage: 400 DCNenncurrent: 18 ampereMaximum speed: 1000 rpm. Excitation voltage: 210 VDCEexciter current: 3.4 ampereShaft diameter: 38 mm (shaft with 10 mm key)Shaft length: approx. 76 mm (shaft protrusion from centering edge)Centering flange diameter: 230 mmBolt circle diameter: 264 mm, 4x 14 mm holesLonglife speedometer HÜBNER type TDP 0.2 LT-4Speedometer voltage: 60V / 1000

DC main spindle drive, power converter device with digital control Simoreg V55Spindle module, drive controller, rectifier, DC regulatorManufacturer SIEMENSTyp SIMODRIVE 6RA2725-6DV55-0 D380/60 Mreq-GdG6V55-3A0Version V55 Basic unitInput voltage 3 AC 380 V Input frequency 50 / 60 HzInput current 49 AAoutput voltage 380 VDCAoutput current 60 ANenn power 22 kWAbdimension (W x H x D) 270 x 260 x 290 mmWeight approx. 25 kgThe drive controller is still Ready for operation in a guild master

DC shunt motor, main spindle motor, servo motor, DC motor, DC motorSIEMENS type 1GG5134-0WH46-6HU7-ZNow power: 22.5 kWook voltage: 38 to 380 volts DCNenn current: 67 ADore number: 50 - 2160 / 4050/5000 rpmShaft diameter: mmShaft pin length: mmKeyway width in the shaft: mm- Foot motor with 4 mounting holes- with mounted external fanOverall dimension L x W x H: approx. 700 x 580 x 350 mmWeight: approx. 250 kgThe drive motor is still ready for operation in a Guild Master GDM42. The

Universal face and boring head LENZ type LPA 1SSpindle tool, spindle head similar to WOHLHAUPTER UPA3Tool holder: SK 40 - M16Adjustment accuracy: 0.01 mm- Accessories as shown- Storage boxWeight: approx. 5 kggood condition; used

Doka Foot Spindle Lower spindle (height adjustable) for shoring towers. 9.00 kg EUR 35,70 per piece Doka Screw jack foot Bottom spindle (height adjustable) for load-bearing towers. 9.00 kg EUR 35,70 per piece

Four-way head spindle, galvanized Four-way head spindle for height-adjustable and tilt-proof connection of shoring and superstructure with one or two H20 formwork girders. 10.4 kg EUR 38,70 per piece 4-way screw-jack head 4 way screw-jack head for height-adjustable, anti-tip connection between load-bearing tower and superstructure with one or two H20 beams. 10.4 kg EUR 38,70 per piece

Doka Load Spindle 70 Lower spindle (height-adjustable) for heavy shoring in combination with clamping nut. 8.75 kg EUR 29,13 Doka Heavy-duty screw jack 70 Bottom spindle (height adjustable) for heavy load-bearing tower in combination with Split nut. 8.75 kg EUR 29,13

Code: 0187 Brand: MASTERWOOD - ZANGHERI E BOSCHETTI Model: LIGNA 3-group multiple boring machine for carpentry, furniture, custom-made furnishings, panels and various Technical data: 1 horizontal boring unit with 21 spindles 1 vertical boring unit with 2 transverse heads with 21 adjustable spindles that can also be positioned longitudinally Steel guide with millimetre scale and 32 pitch scale for positioning stops and pneumatic pressers Spindle centre distance 32 mm Threaded drill bit attachment 2 pneumatic pressers that can be positioned to lock the panel Max panel thickness 90 mm Horizontal boring depth 85 mm Motor power Hp 2,5 Operating pressure 6-8 atm Overall dimensions mm 1850 x 1200 x 1600 h Weight kg 630

Doka load spindle 70 top Upper spindle (height adjustable) for heavy shoring in combination with clamping nut. 9.20 kg EUR 23,04 Doka Heavy-duty screw jack 70 top Top spindle (height adjustable) for heavy load-bearing tower in combination with Split nut. 9.20 kg EUR 23,04

Z640 Mixed Lot (134 pieces) Feed Pliers Automatic Lathe Lathe Turning Center probably for Index Traub or Schütte or similar machines

Doka head spindle Head spindle for height-adjustable connection of shoring and superstructure. 9.20 kg EUR 37,50 Doka Screw jack U-head Screw jack U-head for height-adjustable connection between load-bearing tower and superstructure. 9.20 kg EUR 37,50

Universal table router FZ0 from Zimmermann Model milling machine with adjustable Bosch motor GGS 27 LC Ideal for use in model making and mould making. Drive motor 230Volt, 0.6kW Spindle speed adjustable approx. 12000 to 27000 rpm Machine table approx. 590 x 420mm Unit swivel on both sides up to 90 degrees Longitudinal stop with fine adjustment Extraction hood and protective hood Collet holder 6mm and 8mm Including the milling cutters and burrs shown With lockable base cabinet, 2 drawers and a door, key provided The base cabinet was provided by the previous owner with an aluminum sheet over angles, which offers an integrated extraction option, see photos Waldmann surface-mounted lamp with attached magnifying glass Original paint, dabbed in places CE mark Very well maintained machine from prototype production in the motorsport department of a Wolfsburg car manufac ...

Mori Say TM626 AC, - 5 axial slides, - 4 cross slides, - double slide pos. 6, - pickup spindle, - swarf conveyor with vibrating filter device, - high pressure coolant system, - set of tool holders, - IEMCA PRA auto bar loader L = 3 m, Country of origin: Czech Republic, Operating hours: 23.950, Number of spindles: 6, Max bar diameter [mm]: 26, Spindle speed [rpm]: 500 - 6.000, Spindle motor [kW]: 20, Total power requirement [kVA]: 40, Weight of the machine ca. [kg]: 5.500, Auto bar loader: Iemca PRA 40/33 P

TOYOSK 01BB Fixed 12 Multi Spindle Machine Manufacturer: TOYOSK Type: 01BB Year of manufacture: 1974 Spindle: 12 Bore: 6mm, 12 points simultaneously Feed: 100mm Speed: 2-speed (2500 / 2850rpm) Spindle diameter: 19-23 mm Table size: 350 x 450 mm Spindle speed: 2200-450 mm Power: 1.5 kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

TOYOSK 01C550T Fixed Spindle Pitch 48 Spindle Tapping Machine Year of Manufacture: 1984 Speed ​​(3 stages): 450 / 700 / 1100 rpm Speed ​​Change: Mechanical (stepped stages) Spindles: 48pcs Tool Holder Type: Spring/Clamp Chucks Combined drilling + tapping is also possible. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

TOYOSK 0-PTMS fixed spindle pitch high speed 12-spindle tapping machine Year of manufacture: 1987 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanics, small holes / threads. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Number of spindles 8 Max. bar feed in one station: 130 mm Max. bar feed in two stations: 260 mm Max. stroke radial slide: 52 mm Radial slide adjustment: +- 12 mm Max. stroke axial slide: 72 mm Max. stroke tool spindles: 106 mm Adjustment of tool spindles: +- 10 mm Main spindle speed: 500 - 4,000 1/min Piece time: 2 - 80 s Number of tool positions: 18 Weight: 12,600 kg

X1-/ X3-axis: 180mm, X2-axis: 180mm, Y1-/ Y3-axis: ±45mm, Z1-/ Z3-axis: 704mm, Z2-axis: 620mm, E2-axis: 720mm, rapid traverse X, Y, Z-axis: 30m/min, spindle 1: max. speed: 5000/min, spindle bore: 65mm, chuck diameter: 210mm, spindle 2: max. speed: 7000/min, spindle bore: 42mm, max. chuck diameter: 140mm, spindle nose diameter: 110mm, max. chuck jaw weight: 1.25kg, number of stations: 2x12, number of driven tool stations: 2x12, max. speed: 8000/min, power S3 25%: 4.3kW, torque S3 25%: 13.6Nm. Length: 2880mm, width: 2130mm, height: 1990mm, weight: 7.5t, operating hours: 16,597.7h. Including bar feeder Top Automazioni X-FILES S, year of manufacture 2020, 4x tool holders, straight, left-right square mount, external coolant, 4x machine interface: BT45A, 1x milling head 90°/BMT 45 Spinner, angled milling head/ BMT45/ ESX-25 right and left twin-spindle, Spinner flat coupling, ER25 max. speed: ...

Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Y: 100mm, travel Z1/Z2: 700mm/702mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8400kg, control: Fanuc 31i-B, operating hours: 1565h, spindle hours: 506h. Includes transformer, chip conveyor, filter system, and cooling unit. The cabin door window is broken. Documentation available. An on-site inspection is possible.