spindle used for sale

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type FR-SE-2-15 K ... For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type FR-SE-2-18 5K ... For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type FR-SE-2-22 K ... For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type FR-SE-2-26 K ... For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type FR-SF-2-5.5K ... For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type FR-SF-2-7.5K ... For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type FR-SF-2-11 K ... For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type FR-SF-2-15 K ... For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type FR-SF-2-18.5K ... For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type FR-SF-2-22 K ... For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type FR-SF-2-26 K ... For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Repair and Exchange service Repair and replacement service SERVICE Item: Spindle Controller Repair Type FR-SF-2-37 K ... For MAZAK Mitsubishi We repair your Mazak Mitsubishi component at the stated all-inclusive price or, depending on the effort, also cheaper. The amount of work is about 1-3 days. Urgent repairs are also possible. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Part: Keyboard type YZ11B-2 Repair Service Reparatur Service For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

Sr. No.: 70218 Equipment / Additional information: Various tools

Condition: Very good condition

Repair and Exchange service Reparatur und Austausch Service Item: Spindle Encoder Type TS5690N1230 For MAZAK and MITSUBISHI other types on request If you are interested in our articles or have any questions, please contact us beforehand by phone or email.

SPECIFICATIONS: Mechanical working height adjustment Installed capacity: KW 5.5 Complete with accessories (spindles/counter spindles)

Ref. -No.: 10359 Manufacturer: BRINKMANN Year of construction: 2005 Type of control: CNC Storage location: Halberstadt Country of origin: Deutschland Tool holder type: Sauter Werkzeugrevolver Operating hours: 45000 Hours Further information: Hinged chip conveyor Coolant cleaning with 2 pumps Cooling system 1x jaw chuck without cooling mist exhaust system

Number of spindles 8 Controller Siemens 810D Chuck diameter: 130 mm Max part diameter: 135 mm Total stroke: 125 mm Working length: 100 mm

number of spindles: 6 spindle passage: 27 mm turning length: 59 mm hexagon material: 24 mm square material: 18 mm cross slide travel: 36 mm longitudinal slide travel: 85 mm spindle turning speed range: 366 - 5020 U/min max. torque: 95 Nm control: INDEX total power requirement: 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Set of cutting tools for processing window frames

ELB Perfect BD 15 PLC surface grinding machine, grinding area 1500 x 550 mm, grinding wheel 400 x 100 mm, electric perm magnetic clamping plate 1500 x 550 mm, automatic dresser with compensation, paper belt filter, the machine is overhauled, grinding spindle rebeared, guideways are scraped, meets the tolerance of a new machine. We are happy to take over the installation / training on site, as well as the subsequent service

SECOND-HAND 4+1 SPINDLES MOULDER STETON MOD. FAST 5S - CE RULES Spindle configuration: bottom 3kw right 3kw left 3kw top 4kw universal 3kw - working width mm 230 - planing height mm 120 - volt. 380/50 - s/n 25 906/00 - year 1998

Table dimensions: 680 x 1.000 mm Motor output: 4 kW Spindle diameter: 30 mm reus: 3.000/4.500/6.000/8.000 U/min : 200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Multi-spindle drilling machine make : Burkhard und Weber / Arboga With interchangeable table Dimensions : LxW 800 x 800 Equipped with 10 spindles, drilling diameter 13.5 mm Cam derailleur, automatic and set-up mode. 2 Coolant pumps . Propulsion : electro-hydraulic. Very powerful, it can be powered with 14 active spindles at the same time. become. Total weight: approx. 8.0 tons. (Forklift loading by GEDE possible)

Bench router Brand: Bäuerle Model: SFM Year of construction: 1968 Spindle diameter: 30mm Clockwise/counterclockwise rotation Feeder Brand: Holzher Model: ET 117

CAMAM MO-4A double-sided oscillating drill Number of spindles per page 3 Tool mounting bracket basket 16mm Oscillation adjustable from 0-75mm Distance between spindles 50-900M Two spindle speeds 4500/9000r.p.m Two pneumatic material clamps per side

Magnetic table 455 x 170 mm Digital Water tank Pulling device Wet grinding device

Weibert F40 - Table milling machine Milling spindle 30mm 90° Speeds: 1400/ 3500/ 6000/ 8000 rpm Casting table length 1000 mm width 500 mm Motor 2.2kW 400V Integral Safety Rails 500mm Pressure Device MORI Table extension right and left Right-counterclockwise rotation of the milling spindle

Table dimensions: 2500x 780 mm Motor output: 7,5 kW Spindle diameter: , mm reus: 1.500 - 10.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Precision Surface and Profile Grinding Machine FS1570 SL Grinding area: 1500 x 700 x 650 mm Grinding spindle motor: 18 KW Table drive: hydraulic Transverse drive: electromechanical Paintwork: RAL 6011 – reseda green Equipment: •Central lubrication • Wet grinding device • Fine adjustment knob on the transverse path handwheel • Dressing Diamond • Electro magnetic clamping plate 1500 x 750 mm • Magnetic plate adhesive force control Accessories: • Vertical automatic type SL with "LCD" flat screen and membrane keypad • Electric Straight Dresser • Stepless change of speed • Universal paper filter machine • Machine light • Column elevation by 200 mm • Precision balancing scale • 2 new grinding wheels Machine has been overhauled in 08/2018 "Invoice is available" Here's what was done: •Timing belt •Storage • Ball screw •  ...

Spare parts for Herminghausen SR45 centerless cylindrical grinding machine Grinding spindle Replacement flanges for grinding wheel & regulating wheel the spare parts are used and can be offered in ACTUAL condition or overhauled.

B7010C. T.P4S. UL Spindle Bearings High-precision angular contact ball bearings Manufacturer: FAG New, original packaging Price €145.00 / per piece(s) 3 units available

B7008C. T.P4S. UL Spindle Bearings High-precision angular contact ball bearings Manufacturer: FAG New, original packaging Price €95.00 / per piece(s) 2 units available

Machine Type: Door Belt Drilling Machine Manufacturer: Pressta Eisele Type: Multyfor M Year of Make: 1996 Condition: used and functional / main switch toggle defective / coolant bottle missing. Offer will only be sent if a complete imprint is provided! Price 1.250 Euro incl 19% VAT Vb Location Warstein , Germany Reference M-PRE-0724 DESCRIPTION We offer you a used multi-spindle drilling machine from the manufacturer Pressta Eisele. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Motor 1.4 kW/380 V/50 Hz, spindle 30 mm, tool max. D=200 mm, height and angle adjustment, table 650x600 mm, sliding table 530x280 mm, speeds 3000/6200/9000 rpm (fold down belt), cut-off stop extendable up to 2800 mm, hold-down, table extension 100x200 mm, suction nozzle D=100 mm

power capacity: - kW volt: - V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Motor 5.0 kW/380 V/50 Hz/13 A, 2 speeds, clockwise/counterclockwise rotation, feed 3 rollers, switched socket for feed, stop can be rotated with fine adjustment, stop jaws 560x150 mm, work table 1010x900 mm, table extension right 500x440 mm, extension 2 m to 520 mm extendable, height and side adjustable slot table 810x400 mm, with hold-down and 90° adjustable stop, removable additional support 1070x170 mm with angle stop (Aigner), 4 speeds 3000/4500/6000/9000 rpm (2x belt fold, 2x electr. switchable), suction connection D=2x120 mm

Fully functional Index Lathe Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.

Sr. No.: 111000253 // p/n: 1364000

Control Fanuc 18iTB Main spindle passage 42 mm 6 axes Front horizontal slide designed as cross slide (X1/Z1) Z2 turret slide including: 6-fold turret, IKZ, turret can be swivelled on both sides Rear horizontal slide x2 Two vertical slides X3 and X4 10 tool positions available Conveyor Bar Feeder SAMECA

throat: - mm tool adaptor: MK power requirement: 0 kW max. pitch circle: ca. 250 mm total power requirement: 0 kW weight of the machine ca.: 75 kg dimensions of the machine ca.: Ø 500 x 500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TF170E Table milling machine with sliding table 1m with transverse stop

Carriage (LxW) 1000 x 240mm Working length of spindle 100mm Milling spindle diameter 30mm Spindle inclination +5 - -45° Spindle speed 1800 / 3000 / 6000 / 9000 Working height 900mm Suction nozzle diameter: 38/100 Dimensions (LxWxH) 1000 x 850 x 1200mm Motor 2.8KW 400V Weight 218kg

Stockpresse / Spindle Press Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

ELB Perfect BD 10 750 PLC, Year of construction 2008 Control Siemens STC Grinding area 1000 x 750 mm Grinding wheel 400 x 100 mm Grinding spindle 10 KW Electro Perm Magnetic Clamping Plate 1000 x 750 mm Automatic straight-dressing device with compensation Coolant system with paper belt filter Machine is immediately ready for use CE compliant Installation / on-site training included

Table dimensions: 1100 (2300) x 760 mm Motor output: 7,5 kW Spindle diameter: 30 mm reus: 1500 - 10000 U/min Weight: ca. 880 kg Panhans swivel milling machine 245|200 ------------------------------------ Technical specifications ------------------------------------ Pos. 1: Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Extraction connection 2 x Ø 120mm Stepless speed regulation 1500-10000 rpm Engine power 7.5 kW (10 hp) Net weight approx. 880kg Technical description: 7 touch control, optionally usable, top and below 7 capacitive touchscreen, even with gloves operable (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling zero point selectable in the program, 3 reference points Simple menu structure through innovative touch control (max. 2 levels) Display ( ...

1-Spindel-Papierbohrmaschine - 1-head spindle paper drilling Nagel Citiborma 150 Serial-No. 7404 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: Very good condition

Spindelpresse - Spindle Press Krause Press area max. 250 x 280mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test