We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,781 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Condition: Very good condition
used
Hand screw press - type "NEHER" -Good used condition Dimensions: LxWxH 1.4x1.2x2.3Meter Weight 850Kg Wckq0zxa
used
1-Head paper drilling Nagel Citiborma Year - Serial-No. S129 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
2-Spindel Papierbohrmaschine / Twin-head paper drilling Foellmer DUO Year 1994 Serial-No. 127 -We would be very pleased with your visit - more machines on Stock- -Available Immediately- -Can be inspect- -On Stock Emskirche
used
used
- 6 spindles - Max. bar clearance: 63.0 mm - Rod guide and stand including many accessories (see photos)
used
BIESSE TechnoLogic through-hole drilling machine Drilling on 4 sides
used
Router model OF 950 year 90
used
General2 Axes Universal Turning Machine - tool drive - C axis - Y axis - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmSwing diameter over transverse guideway370 mmBar diameter max.80 mmTurning diameter400 mmSlide 1Longitudinal stroke830 mmTransverse stroke271 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)630 NmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,30 x 2,43 x 1,94) mWeight approx. ...
used
General2 Axes Universal Turning Machine - tool drive - C axis - Y axis - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® multi-touch control Slide 1Longitudinal stroke830 mmTransverse stroke271 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minWorking areaSwing diameter over guide ways700 mmSwing diameter over transverse guideway370 mmTurning diameter400 mmBar diameter max.80 mmMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmC-Axis Speed-200 rpmMax. torque (40% DC)426 NmTorque of C-Axis (holding torque)630 NmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,30 x 2,43 x 1,94) mWeight approx. ...
used
SECOND-HAND 5 SPINDLES MOULDER WEINIG PROFIMAT 23 E - CE RULES working width 260 mm working height 160 mm. composition : - horizontal bottom 5.5Kw - vertical right (7.5Kw Rh + Lh) - vertical left - horizontal top 7.5Kw - horizontal bottom 11Kw year 1998 (CE) V 380/50
used
Description: Machine number 1296 , Pitch per revolution 24 mm , Pressure capacity 16 t , Table dimensions 560 x 270 mm , Wheel diameter 1100 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 1,000 x 1,800 mm, weight approx.: 300 kg
used
- 6 spindles - Guide tubes Equipment according to pictures Available from week 20/2024
used
Code: 0019 Brand: REIMALL Model: 105 Multiple boring machine Worktable dimension mm 1000 x 500 N° 2 movable motors Vertical stroke of worktable mm 120 Weight kg 550
used
Description: - Approx. Onsite Dimension. (l x w x h): 1,100 x 200 x 100 mm, weight approx.: 40 kg
used
Description: Consisting of approx. 6 pieces Partly in original packaging Approx. Onsite Dimension. (l x w x h): 500 x 400 x 100 mm, weight approx.: 20 kg
used
Extruder liner and screw from 25 to 140 Ø Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
used
Used milling machine Manufacturer: Zimmermann Type FZ 1 Built in 1987 With brake Total weight approx. 500 kg Speeds 560/1,000/1,800/2,200/3,600/4,400/7,400/14,000rpm. Clockwise/counterclockwise rotation Table size 630x490mm Support table 490x400mm Longitudinal movement 420mm Transverse movement 420mm Head can be swivelled on both sides With rotary table With abb. Accessories (cutters, clamps) Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. ...
used
Used milling machine Manufacturer: Zimmermann Type FZ0 (Fritzi) Built in 1986 with base cabinet with various milling cutters Total weight approx. 200 kg Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we h ...
used
turning speeds: - U/min frequency: - Hz output: - kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Quantity 2 pieces Version: 71938.E.T.P2H.DUL.GH89 Condition: Unused, original packaging. Approx. Onsite Dimension. (l x w x h): 300 x 300 x 150 mm, weight approx.: 12 kg
used
Description: working table dimensions 880 x 425 mm number of spindles 21 distance between spindles 32 mm distance between the first and the last spindles 640 mm spindles revolutions 2850 min-1 motor power 1,1kW maximal air pressure 6 Bar dimensions without rip fence 1320 x 1220 x 1400 mm required area 3500 x 3500 mm Approx. Onsite Dimension. (l x w x h): 1,320 x 1,220 x 1,400 mm, weight approx.: 2,754 kg
used
Description: amount 1 piece weight approx.: 15 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm
used
SPECIFICATIONS: Set of cutting tools for processing window frames
used
Description: 380 V Approx. Onsite Dimension. (l x w x h): 1,250 x 900 x 1,100 mm, weight approx.: 1,000 kg
used
Description: Slotting machine - vertical, technical details: ram stroke - max. 230 mm, throat 230 mm Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 400 mm, weight approx.: 200 kg
used
Description: Including accessories (see pictures) Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm, weight approx.: 200 kg
used
Country of origin: Germany, Number of spindles: 8, Auto bar loader: Cucchi BLT - bundle magazine
used
Refurbished 1992 Tapping Multi-edge hammering 1x threaded rods 2x threaded spindles Bar feeder Giovanni Cucchi DBMF 26 (YOC 2001) Lots of accessories
used
Description: 35 mandrels Center distance 32 mm Attachment M10 Head inclination 0-90° Approx. Onsite Dimension. (l x w x h): 1,900 x 1,200 x 1,200 mm, weight approx.: 850 kg
used
Key data: 20 t
Article code: 13-13-023 Manufacturer: Neher Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1972 L x W x H: approx. 1600x1600x2300mm Weight: approx. 1200kg Max. pressing force: approx. 20 tons Wheel Diameter: ca.1600mm Working stroke: approx. 300mm Other accessories on request Price and other technical data on request
used
Key data: 20 t, 420 mm
Article number: 13-13-024 Manufacturer: Reyer Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1972 L x W x H: approx. 1200x800x2000mm Weight: approx. 400kg Max. pressing force: approx. 20 tons Table surface: approx. 420x530mm Other accessories on request Price and other technical data on request
used
Description: Point width approx. 1500 mm , Turning diameter over bed approx. 940 mm , Turning diameter above support approx. 740 mm , Rod clearance approx. 200 mm Fabrication number 1-206/59 , Power 30 kW , Voltage 3 x 500 V Nominal current 55 A Frequency 50 Hz Control SIEMENS Sinumerik The machine was modernized in 2001 by the Stork company Approx. Onsite Dimension. (l x w x h): 4,500 x 2,200 x 1,950 mm, weight approx.: 4,500 kg
used
The machine is equipped with six main spindles, six counter spindles and two control stations, x-travel: 300mm, y-travel: 500mm, connected load: 190kW, controls: C200-4D Siemens 840D, with coolant device, belt filter system, Kraft & Bauer FT704 fire extinguishing system, Festo handling, Siemens Simatic OP 7 operator panel, removal device, positioning gripper, set-down device and other accessories, has been regularly serviced, on-site inspection is possible, the number of operational hours is unknown, but will be more than 100,000h.
used
Takang TKV-860-HT CNC Twin Spindle Vertical Turning Center Year 2015 . GENERAL SPECIFICATIONS Max. Cutting Diameter: 800 to 1000mm Max. Swing Diameter: 1000mm Max. Cutting Length: 860mm Spindle Motor (FANUC aP40): (2) 50 HP Alpha P40 2-Speed Gearbox Motors Spindle Speed Range: 10-1500 RPM Spindle Nose: A2-11 Spindle: Spindle Motor (FANUC aP40): (2) 50hp Alpha P40 2-Speed Gearbox Motors Spindle Speed Range: 10 - 1,500rpm Max Chuck Diameter: Installed 31.5" 3- Jaw Hydraulic Chucks Spindle Nose: A2-11 Front Bearing Diameter: 7.87" Spindle Bearings: Double Row Cylindrical and Angular Contact Spindle Speed Selection: Direct RPM Programming Spindle Speed Override: 50% ~ 200% Speed Range Shift: 2- Speed Gearbox Programmable High-Low Range Axis Drives: X Axis Travel (FANUC a22/3000i AC 4.0 HP): 18.31" Z Axis Travel (FANUC a22/3000iB AC 5.0 HP): 33.07" X Axis Thrust Force: ...
used
Key data: 550
Center height: 550 mm Center distance: 2500 mm Spindle bore: 128 mm Workload 4.500 Kg Flying in chuck 1600 Kg Swing over bed Ø: 1.100mm Swing over cross slide Ø:780mm DBC Turning Length: 2.500mm Spindle bore: 128mm Spindle power: 37kW Bed width: 600mm Tailstock spindle Ø: 125Ø Stroke pinole: 270mm Spindle taper: 6Mk Speeds / ranges: 900Rpm Length: 4.800 mm Width: 2.200 mm Height: &nb ...
used
Key data: 200
Center height: 200 mm Center distance: 1000 mm Spindle bore: 0 mm Swing over bed Ø: 400mm Swing over cross slide Ø:250mm Spindle bore: 50mm Spindle power: 5kW Tailstock spindle Ø: 50Ø Stroke pinole: 120mm Spindle taper: 3Mk Speeds / ranges: 3000Rpm Length: 1.900 mm Width: 1.000 mm Height: 1.300 mm Weight: 840 kg
used
Key data: 216
Center height: 216 mm Center distance: 2000 mm Spindle bore: 76 mm Make: COLCHESTER Type: Mascot 1600 YOP: 1993 Swing over bed Ø: 432mm Swing over cross slide Ø:267mm Swing in the gap Ø: 710mm DBC Turning Length: 2.000mm Spindle bore: 76mm Spindle power: 7,5 kW Tailstock spindle Ø: 60Ø Stroke pinole: 120mm Spindle taper: 5Mk Speeds / ranges: 2000Rpm Length: 3.500 mm Width: 1.500 mm Height: ...
used
Center height: 650 mm Center distance: 6500 mm Spindle bore: 140 mm Swing over bed Ø: 1.300mm Swing over cross slide Ø:1.000mm Swing in the gap Ø: 1.600mm DBC Turning Length: 6.500mm Gap length: 400mm Spindle bore: 140mm Spindle power: 28.5kW Bed width: 650mm Tailstock spindle Ø: 120Ø Stroke pinole: 300mm Spindle taper: 6Mk Speeds / ranges: 800Rpm Length: 8.360 mm Width: &n ...
Center height: 180 mm Center distance: 750 mm Spindle bore: 42 mm JESSEY - STUDTURN 1440 Universal lathe Ø 360 x 750 mm MACH - ID 6364 Make: JESSEY Type: STUDTURN 1440 YOP: 2004 Swing over bed Ø 360 mm Swing over cross slide Ø 215 mm Swing in the gap Ø 560 mm DBC Turning Length 750 mm Gap length 150 mm Spindle bore 42 mm Spindle power 3,75 kW Bed width 250 mm Tailstock spindle Ø 50 Ø Stroke pinole 120 mm Spindle taper 3 Mk Speeds / ranges 2000 Rpm Length 1.830 mm Width 915 mm Height 1.524 mm Weight 1.000 ...
used
Center height: 205 mm Center distance: 1000 mm Spindle bore: 52 mm PUMA - C410 Universal lathe Ø 410 x 1000 mm MACH - ID 6353 Make: PUMA Type: C410 YOP: 2012 Swing over bed Ø 410 mm Swing over cross slide Ø 255 mm DBC Turning Length 1.000 mm Spindle bore 52 mm Spindle power 5.5 kW Bed width 250 mm Tailstock spindle Ø 50 Ø Stroke pinole 120 mm Spindle taper 4 Mk Speeds / ranges Vario 3000 Rpm Digital read out Variomatic RPM Multi fix style tool system 3 and 4 chuck BIG cabinet tools Length 2.000 mm Width 1.200 mm Height 1.400 mm Weight 1.200 kg &nbs ...
Center height: 410 mm Center distance: 2000 mm Spindle bore: 128 mm VDF BOEHRINGER - DUE 800 Universal lathe Ø 820 x 2000 mm MACH - ID 6308 Make: VDF BOEHRINGER Type: DUE 800 YOP: 1989 Swing over bed Ø 820 mm Swing over cross slide Ø 515 mm DBC Turning Length 2.000 mm Spindle bore 128 mm Spindle power 30 kW Bed width 560 mm Tailstock spindle Ø 125 Ø Stroke pinole 200 mm Spindle taper 6 Mk Speeds / ranges 1400 Rpm Dimensions Length 4.800 mm Width 1.985 mm Height 1.900 mm Weight 8.000 kg
used
Center height: 255 mm Center distance: 2000 mm Spindle bore: 103 mm MACH - ID 6226 Make: POTISJE Type: USA 250 YOP: 1997 Swing over bed Ø 510 mm Swing over cross slide Ø 320 mm Swing in the gap Ø 700 mm DBC Turning Length 2.000 mm Gap length 255 mm Spindle bore 103 mm Spindle power 5.5 kW Bed width 350 mm Tailstock spindle Ø 76 Ø Stroke pinole 200 mm Spindle taper 5 Mk Speeds / ranges 1500 Rpm 2 axis digital readout system 2 x steady rest CE Mark Dimensions Length 3.500 mm Width 1.200 mm Height 1.600 mm Weight 2.600 kg
used
Center height: 260 mm Center distance: 1000 mm Spindle bore: 62 mm MACH - ID 6220 Make: VDF BOEHRINGER Type: DUE 500 YOP: 2004 Hours: 8000 Swing over bed Ø 520 mm Swing over cross slide Ø 315 mm DBC Turning Length 1.000 mm Spindle bore 62 mm Spindle power 11 kW Bed width 360 mm Tailstock spindle Ø 80 Ø Stroke pinole 120 mm Spindle taper 5 Mk Power 15 kW Speeds / ranges 2240 Rpm Dimensions Length 2.800 mm Width 1900 mm Height 1.900 mm Weight 4.200 kg
used
Center height: 277 mm Center distance: 2000 mm Spindle bore: 90 mm MACH-id 5421 MAKE Colchester 600 Lathes TYPE Mastiff VS YOP 1996 SPECIFICATIONS Swing over bed Ø 554 mm Swing over cross slide Ø 370 mm Swing in the gap Ø 830 mm Gap length 215 mm Spindle bore 90 mm Spindle power 11 kW Bed width 400 mm Tailstock spindle ⌀ 95 ⌀ Stroke pinole 145 mm Spindle taper 6 Mk DIMENSIONS Length 3545 mm Width ...
used
Center height: 260 mm Center distance: 1500 mm Spindle bore: 62 mm MACH-id 5363 MAKE VDF BOEHRINGER TYPE DUE 500 YOP 80 er SPECIFICATIONS Swing over bed Ø 520 mm Swing over cross slide 315 mm DBC Turning length 1500 mm Spindle bore 62 mm Spindle power kW 15 kW Bed width 360 mm Tailstock spindle ⌀80 ⌀ Stroke pinole 300 mm Spindle taper 5 Mk Workpiece weight 1200 Kg Speeds / ranges 2240 Rpm DIMENSIONS Length & ...
used
Center height: 500 mm Center distance: 1500 mm Spindle bore: 130 mm Overhauled gearbox in 2020 4 chuck Ø 1200 mm Build from <Meehanite> cast iron Hardened and ground guide ways Swing over bed Ø: 1.040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1.780mm DBC Turning Length: 1.500mm Gap length: 750mm Spindle bore: 130mm Spindle power: 24kW Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Speeds / ranges: 600Rpm Feed rate X-Axis: ...
used
Center height: 550 mm Center distance: 3000 mm Spindle bore: 128 mm Swing over bed Ø: 1.110mm Swing over cross slide Ø:775mm DBC Turning Length: 3.000mm Spindle bore: 128mm Spindle power: 30kW Bed width: 600mm Tailstock spindle Ø: 125Ø Spindle taper: 6Mk Speeds / ranges: 1120Rpm Length: 4.500 mm Width: 2.000 mm Height: 2.000 mm Weight:   ...
used
Center height: 520 mm Center distance: 1200 mm Spindle bore: 62 mm Swing over bed Ø: 520mm Swing over cross slide Ø:315mm DBC Turning Length: 1200mm Spindle bore: 62mm Spindle power: 11kW Bed width: 360mm Tailstock spindle Ø: 80Ø Stroke pinole: 100mm Spindle taper: 5Mk Speeds / ranges: 2240Rpm Length: 3200mm Width: 1600mm Height: 1800mm Weight: &n ...
used
Center height: 700 mm Center distance: 4000 mm Spindle bore: 90 mm Swing over bed Ø: 700mm Swing over cross slide Ø:500mm DBC Turning Length: 4000mm Spindle bore: 90mm Spindle power: 8kW Bed width: 400mm Tailstock spindle Ø: 5Ø Stroke pinole: 80mm Spindle taper: 185Mk Speeds / ranges: 2000Rpm Length: 5825mm Width: 1400mm Height: 1800mm Weight: &nb ...